How to stop vertical line between columns repeating in 2nd column
Hi there,
I have a report in which the details sections are repeated over 2 columns. I want to have a vertical line going down between the columns, however I don't seem to be able to place the line in the "dead space" between the sections, so I end up with the line repeated at the right hand side of the second column.
Can anyone suggest how to draw the line independently of the columning format?
thanks
-KarenB
oh duh! of course! The problem only started when I shortened the line to the last details section while trying to fix another problem... thanks for the tip! All fixed.
cheers
-KB
Similar Messages
-
I am trying to construct an invoice. How can I install a vertical line between two or more underlined lines to create a break. I have tried the insert, shapes and nothing works. If I try any of the functions the whole document shifts to the right and I loose some of the lines. Is there a work around, or is I work not able to do what I want?
Thanks
ArmandIt sounds as though you may have "Object Causes Wrap" activated for the Line Shape. This will push other content away.
See the Wrap Inspector.
Jerry -
How can i remove the line between columns?
I'm laying out poetry and I only want one column--even in landscape mode. But in landscape mode there's still the line between columns that cuts through my text. I've tried dragging the line, clicking on it and deleting it. When I click on it two Xes appear on the top and bottom, but they don't appear to do anything.
I did a little more reading of threads and now I understand the approach.
Go to View/Layouts and click on any of the layouts which appear on the left. At that point you will have access to the full page template and may make any and all changes you wish.
Keep in mind that some elements will be locked requiring an Arrange/Unlock command before you can eliminat them.
In the end it will be very easy to create completely customized layouts, including background images, rules, etc. etc.
Good luck with the poetry. -
How to print vertical lines for line items?
hi experts,
can any one tell me how to print vertical lines for line items in ascript?
ive tried using sy-vline but its printing jus one line each for each item .i want it in columns ?if there are any control commands plz let me know how to print?
thanks ®ards
narendarhi narendar,
Welcome to SDN.
u can go for box command.
Use the box command with zero width for vertical lines.
Position the line by x position and y postion.
syntax :
BOX <xpos> <ypos>
<width>
<height>
<thickness in twips> twips.
Regards,
Arun.
Reward points if useful. -
How to stop Adobe Flash plugin from repeatedly crashing Firefox?
How to stop Adobe Flash plugin from repeatedly crashing Firefox?
yeah, having the same problem.
Hulu is working on my internet explorer 8, tho... Interesting thing is that it detected I didn't have the 10.1 version of adobe flash player even though I just downloaded that on firefox. So MAYBE the problem is between firefox and adobe. Just a guess -
How to have vertical lines in NSTableView?
how to draw vertical lines in NSTableView? thanks.
Where do you want to draw them? If you're referring to vertical lines where two columns meet, it's just a setting in Interface Builder, though you can do it programmatically too. Select the NSTableView in Interface Builder and click the checkbox for "Vertical Lines".
You can do it programmatically as follows:
to have vertical lines:
[tableView setGridStyleMask: NSTableViewVerticalGridLineMask];
to remove vertical and have no lines:
[tableView setGridStyleMask: NSTableViewGridNone];
Hope this helps....
Dual 2.7 GHz PowerPC G5 w/ 2.5 GB RAM Mac OS X (10.4.6) -
How to delete the line between the last point and first point?
How to delete the line between the last point and first point?
I want to draw a curve many times, from first point to the end point. and redraw from first point to the end point.But I hope update point by point. but between the end point and the first point, there is a line. How to delete the line?
the code is:
CNiReal64Vector plotData(50);
m_graph.ChartLength = 50;
//m_graph.ClearData();
for (int j = 0; j < 2; j++)
for (int i=0; i<50; i++)
plotData[i] = ((double)rand()/(double)RAND_MAX)*6 + 4;
m_graph.GetPlots().Item("Plot-1").ChartXY(i, plotData[i]);
Sleep(100);
Attachments:
20150605142608.png 31 KBHi Kumar,
I think you can just delete it in the sales order directly, if you are using make-to-order scenario, then there will be special stock left for the sales order as the production has been goods receipt, you need to use MM transaction move the stock to unrestricted use stock. If you are using make-to-stock scenario, there should be no further problem. If you are using assembly order, please try to reject the sales order item to see if it could fullfill your requirement.
Regards,
Rachel -
How to type vertical line on macbook pro keyboards?
Please tell me how to type vertical line on macbook pro keyboards?
(1) It sounds like you might be using a Spanish keyboard. You should specify this to begin with. Unless you do, the default assumption is that you're using a US keyboard. The advice you received is correct for the US keyboard.
(2) To see how to enter any character available with your current keyboard, enable Keyboard Viewer, as described here
<http://docs.info.apple.com/article.html?path=Mac/10.7/en/mh35878.html>
(3) There is no "alt" key on a Mac keyboard. You are talking about the Option (⌥) key. See (search for "Alt key" in)
What's it called on my Mac?
<http://docs.info.apple.com/article.html?path=Mac/10.7/en/cpmh0038.html>
Switch 101: On Windows, I used to...
<http://support.apple.com/kb/HT2514>
(4) My advice is move on from Fraise. AFAIK, it's dead. Try TextWrangler, which is free and more capable. -
How to have vertical line appear programmatically between columns?
Hello,
For a forecasting report, I need to draw a line between "past" columns and "future" columns. Unfortunately, just turning on a right or left border is not satisfactory (spaces between rows gives a "dashed line" appearance). An SAP marketing type told us "Oh, you can have a line drawn automatically on your report, based upon some condition". I've looked and looked, and cannot find any built-in programming objects which would provide for this. I'm using Crystal Reports XI Rel 2.
Any ideas?
Don Dazey
707.868.7154
Booz Allen Hamilton
Fairfield, CaliforniaIf you've tried drawing a line, and enabling "extend to bottom of section" and that didn't work...
Would it be true to say that the height of the sections where you want this line to appear within vary as you go through the report? Do you want the line to appear at a different x-position depending on some value?
I have a fudgy fix or two, but I need to know if you just missed he "extend" trick first!
Cheers,
J -
How to use a vertical line as column separator in Pages?
I have a two-column document (a questionnaire) in which I'd like to have a thin vertical line separating the text columns for the sake of clarity. I've tried inserting a floating line using "Insert Shape" but it doesn't appear to like living between the columns. I see these column separators quite a bit in published multi-column layouts, so I figure that I'm not completely crazy. Can anybody offer a suggestion?
Charlie PerdueThanks... that did it! I had (mistakenly) assumed that once the line was "floating" that it wouldn't interact with the text any more, so that I didn't have to worry about the whole "wrap" issue.
Thanks for the quick response. -
Vertical line separating columns?
The answer to this question is probably so simple it's embarrassing, but I can't seem to figure out how to insert a vertical line in the gutter between columns in a document. I think Pages will be great to work with once I master a few of these little questions. I don't want to have to go back to MS Word or WordPerfect!
Welcome to Apple Discussions
You will have to insert a line: Insert>Shape>Line. Then in the Metric Inspector rotate it to vertical and in the Graphic Inspector set the point size to adjust the thickness. To place more of them, duplicate the line (Cmnd D) and drag to the next gutter. I, too, wish there were an automatic way to do it.
Walt -
How to draw vertical lines in SMART FORMS
Hi Guys,
Can anyone please let me know how to draw vertical and horizontal lines in smart forms, i have to do this in the secondary window.
thanks,
RameshHi Ramesh,
In the window output options you have option of check box to get lines.
Then you need to give the spacing for vertical and horizontal.
Another option is putting a template on window and getting the boxes, but it is quite little bit complex.
Put the cursor on the WINDOW in which the lines you want.
Right click on it>create>complex section.
In that select the TEMPLATE radio button.
Goto TAB TEMPLATE.
Name: give some name of line.
From: From coloumn.
To: To coloumn
Height: specify the height of the line.
Next give the coloumn widths.
Like this you can draw the vertical and horzontal lines.
If the above option doesnot workout then u can try the below option also
any how you can draw vertical and horizontal lines using Template and Table.
for Template First define the Line and divide that into coloumns and goto select patterns and select the required pattern to get the vertical and horizontal lines.
For table, you have to divide the total width of the table into required no.of columns and assign the select pattern to get the vertical and horizontal lines.
if this helps, reward with points.
Regards,
Naveen -
How to set vertical line in SAPScript
Dear All,
I have to set vertical line at a particular position of SAPScript. Here the lines are of varying length. Can you suggest how to do that?
Line 1...................... | Vertical Line
Line 2......................... | Vertical Line
Line 3............... | Vertical Line
Thanks and regards,
AtanuHii
use this
BOX WIDTH 0 FRAME 10
BOX HEIGHT 0 FRAME 10
BOX WIDTH 5 CM HEIGHT 1 CM FRAME 10 TW INTENSITY 10
BOX WIDTH 7 CM HEIGHT 5 CM FRAME 10 TW INTENSITY 10
HOPE THIS HELPS
Thanks & Regards
Naresh -
How to add blank lines (in column) in SQLplus
I get error when doing below insert, how do I add blank lines in column (via SQLplus)?
insert into a values(1, '78 ABC house,
Some Road
London E34');
ThanksJust set "SQLBLANKLINES" to ON:
SQL> set sqlblanklines on
SQL>
SQL> insert into dept values (50, 'This department
2
3 has several
4
5 blank lines','This
6
7 Loc') ;
1 row created.
SQL> select * from dept where deptno = 50 ;
DEPTNO DNAME LOC
50 This department This
has several Loc
blank lines
1 row selected.
SQL> -
How to draw vertical lines that are visible in preview mode?
Hi all,
I need to draw vertical lines on a document. The lines must be same as we draw using line tool.
I could draw the line using CreateLineSpline() method of IPathUtils.
The problem is that these lines are not visible in preview mode. Please tell how can we make lines that are visible in preview mode.
Please help, I'm running out of time.CodeSnippetRunner has the answer:
Utils<IPathUtils>()->CreateLineSpline
Maybe you are looking for
-
Can't open attachments and Jpegs from my email
I upgraded to Firefox16 and since can't open attachments or jpegs in my yahoo email account. Yahoo claims that the problem is with my browser.
-
Photos printing, unable to fill picture
I am trying to print an image in Photos for OSX. When i hit print I am shown the image preview, and selection of printer, paper size and settings. The thumbnail for 4x6 looks fine, but when I have selected it and hit print, I reach a new screen, simi
-
IBM SVC console uses websphere. Screen data that is presented in table form last row appears to overwrite the prior row only. In other similar layouts, the last row is cut in half and cannot be seen. The prior version of Firefox 3 (something) did not
-
Best method to fill in tablemodels getColumnClass
Hello, in my application i have several JTables. The data represented on it is derived from a database. Some columns are booleans, but because my database doesn't support booleans I use VARCHAR(1) which is a String in Java. All my tables are using a
-
Hi, i need to extract the dtata from cube through infospock and save as a excel formate but i dont know how to create the header. Please some one help me Thanks