How to stop webdynpro runtime killing previous application resources

Hi
I gone through the how to guide http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/91b6ad90-0201-0010-efa3-9626d2685b6e
I have similar requirement where two applications existing in different projects(same).
I have a requirement where source application need to send some parameters to the target application.This can be performed using the above tutorial approach,but the issue is when the target application closed, the source application automatically expiring.
Any help on this issue issue.. i need a interaction between source and targed and vice versa.
Thanks
Prasad

Similar Messages

How do i stop all of my previous applications from starting up when i turn my macbook pro on?

Whenever I turn on my Macbook Pro all of the applications i was using the previous session start up. It takes a good five minutes to cycle through all of the start ups and closing them down.
How do I stop this?
Thanks,
Lee

When you restart or shutdown, uncheck this option.

How to stop my 1553 Remote terminal application from locking up the Front Panel when the Bus Controller application is causing msgs traffic over the 1553 bus. This simulation uses WIN98SE with excalibur ISA cards.

This simulation has several transmit and receive messages. The fastest message refresh rate is set to 50Hz (20 ms).

Hi,
Can you provide some more information about what hardware and software you are using? What is your application? Thanks!
JenK

How to stop Mac from starting opening applications that were on when I shut it down?

When my wife wants to finish using her Air she just shuts it down. Upon restarting it later, however, it launches every application she had been using earlier in the day. Is there a way to turn this off?

when you hit  > Shutdown there comes a dialog. disable the checkbox "reopen windows when logging back in"

How to stop iphone from getting previous mails into the inbox?

As Above

You can do a forums search for the difference in imap and POP accounts.
They will behave differently in relation to your iphone.

How to stop and start only the process of Oracle Application Express?

I'd like to know how to stop the process of Oracle Application Express on my server installed oracle express package.
After installed Oracle Express edition, not only oracle database server processes but also Oracle Application Express, such as http server, is started automatically...
I hope to stop and start Application Express on demand but is this feature enabled?

Oracle Apex is an API, if that helps you understand / visualize. You do not start Apex process nor stop it.
When an Apex session starts it starts calling the API.
You can however start / stop the listener. It may be OHS, ApexListener and the J2EE container running it, OC4J or any other "server" that you are using.
The built-in EPG is something like an API again, you cannot start / stop it but you can disable/enable it with DBMS_XDB.SETHTTPPORT API.
Regards,

Ios 7.0.2 issue: how to stop running programs

I am a new iPhone5 user and just installed ios 7.0.2 (maybe I should not have but I did). Now I don't know how to stop running programs. Previously
I double-clicked the Home button, then saw the icons that represented running programs, then could lightly touch one of them which led to all of them
showing a X for a potential delete. That does not work now so how do I do it?

Double click the home button and then swipe up on the app screenshots.

Firefox 4.0 has disabled Trendmico Toolbar and 2 other items. How can I return to prior Firefox application?

I installed new Firefox 4.0 and it automatically disabled Trend Micro tool bar 3.1.1110, Trend Micro NSC Firefox Extension 6.5.0.1234 and HP Smart Web Printing 4.6.0 since they wer "not compatible.
How can I return to my previous application of Firefox?

Did you try the add-on compatibility reporter? https://addons.mozilla.org/en-US/firefox/addon/15003/
Firefox 4.0 beta 1 installs to a separate directory, so unless you uninstalled it, your previous Firefox install should be there. Just find it in the start menu and run it, allowing it to set itself back as the default browser.
If you did uninstall it, just install it again: [[Installing Firefox]].
You can but don't have to uninstall 4.0 via Add/Remove Programs

Photoshop elements 10 won't start. Message is. 'Runtime error. Application has requested the runtime to terminate in an unusual way. Please contact support team for more information' 'microsoft Visual C Runtime Library. How do I fix this or can I jus

photoshop elements 10 won't start. Message is. 'Runtime error. Application has requested the runtime to terminate in an unusual way. Please contact support team for more information' 'microsoft Visual C Runtime Library. How do I fix this or can I just uninstal and then re-instal (without losing my spare licence that I want to use elsewhere) It is a PC not a Mac

See if anything here helps:
Troubleshoot C++ runtime errors | Adobe products | Windows

At the top of my homepage, I'm getting a message "Downloading the latest applications", but the circle to the left keeps spinning, and no applications are downloaded. I don't know how to stop this, tried right and left clicking on the bar. This occurs

At the top of my homepage, I'm getting a message "Downloading the latest applications", but the circle to the left keeps spinning, and no applications are downloaded. I don't know how to stop this, tried right and left clicking on the bar. This occurs every time I open Firefox. How can I stop or disable this?
== This happened ==
Every time Firefox opened
== Several weeks ago.

See http://kb.mozillazine.org/Software_Update (Software Update not working properly)
Remove the files in the ''updates'' and ''updates\0'' folder:
Vista/Windows7:
C:\Users\<user>\AppData\Local\Mozilla\Firefox\Mozilla Firefox\ (updates)
C:\Users\<user>\AppData\Local\VirtualStore\Program Files\Mozilla Firefox\ (updates)
%LOCALAPPDATA%\Mozilla\Firefox\Mozilla Firefox\updates\

How to stop the auto updater in N900 application m...

Hey guys,
Anyone know how to stop the auto updater in N900 application manager ?
Coz when i connect via wifi or 3G, it always try to search for updates...Coz of that i cant search the web properly until its over.
Specially when i connect via GPRS, i have to pay more for this extra mega bites use from app manager...
So got any ideas for this prob...?
(I usually use faster app manager to install apps.)
Click the star if this helps you (",)
If this is your answer, please do not forget to click "Accept as solution" (",)

virajx3006 wrote:
Hey guys,
Anyone know how to stop the auto updater in N900 application manager ?
Coz when i connect via wifi or 3G, it always try to search for updates...Coz of that i cant search the web properly until its over.
Specially when i connect via GPRS, i have to pay more for this extra mega bites use from app manager...
So got any ideas for this prob...?
(I usually use faster app manager to install apps.)
dude check your inbox
Reality is wrong....dreams are for real... 2pac .
don't forget to hit that green kudos

How to stop the bridge.exe active as to install the new application eg.Flash CC?

how to stop the bridge.exe active as to install the new application eg.Flash CC? please help?
I can't install the any new application every time.

Please refer:
http://helpx.adobe.com/creative-suite/kb/error-installation-cannot-continue-bridge.html
Regards,
Ashutosh

How to stop the new health application from Count the steps/ woking background?

how to stop the new health application from Count the steps/ woking background?
I really need your help

I agree with Mr. Hall that using mx.controls.Alert in Flex may be a better route.
Show the Alert like this:
// show an alert with a question and yes and no choices
Alert.show( "Would you like to go to the Adobe Forums?", "Question",
     Alert.YES | Alert.NO, this, closeHandler, null, Alert.YES );
Then handle the response in the closeHandler() function:
protected function closeHandler( closeEvent:CloseEvent ):void
if( event.detail == Alert.YES )
     navigateToURL( new URLRequest('http://forums.adobe.com'), '_self' );
else if( event.detail == Alert.NO )
     // they chose no
The following documentation on Alerts may be helpful:
http://www.flexafterdark.com/docs/ActionScript-Alert
Let me know if that helps...
Ben Edwards

How to start/stop/restart a java desktop application from remote machine

Hi,
I want to know is there a way in java where i can start/stop/restart a java desktop application running on a remote machine through another java desktop application?
For e.g i have an Admin console which monitors its clients based on socket communication, all of them are java desktop applications. I want to also give start/stop remote clients through my Admin console.
I am thinking in terms of windows system service which can start/restart/stop my clients on request of Admin console, but how can i call this system service remotely?
How can i do it?

I got it. its about connection...

How to connect webdynpro application to database (Sql server)

Hi Experts,
Can someone suggest me how to connect webdynpro application to SQL Server. (Possibly in detail)
Thanks Regards,
Sandeep

hi sandeep,
here is a sample code which connects to a backend database Oracle; Connection is same for all DBs as you are using open sql commands.
 try {
 String eposta = wdContext.currentContextElement().getEposta();
 String tel = wdContext.currentContextElement().getTelefon();
 String company = wdContext.currentContextElement().getCompany();
 String message = " ";
 String onerikonusu = " ";
 String oneri_mdurum = " ";
 String oneri_odurum = " ";
 String oneri_bfaydalar = " ";
 String oncelik1 = " ";
 String uygulama = " ";
 String tarih = (new SimpleDateFormat("dd-MM-yyyy").format(new java.util.Date()));
 String saat = (new SimpleDateFormat("HH:mm:ss").format(new java.util.Date()));
 //java.sql.Date tarih = java.sql.Date.valueOf(creationDate);
 //java.sql.Time saat = java.sql.Time.valueOf(creationTime);
 if (wdContext.currentContextElement().getMesaj() != "")
 { message = wdContext.currentContextElement().getMesaj(); }
 if (wdContext.currentContextElement().getOneri_konusu() != "")
 { onerikonusu = wdContext.currentContextElement().getOneri_konusu(); }
 if (wdContext.currentContextElement().getOneri_mdurum() != "")
 { oneri_mdurum = wdContext.currentContextElement().getOneri_mdurum(); }
 if (wdContext.currentContextElement().getOneri_konusu() != "")
 { oneri_odurum = wdContext.currentContextElement().getOneri_odurum(); }
 if (wdContext.currentContextElement().getBekfaydalar() != "")
 { oneri_bfaydalar = wdContext.currentContextElement().getBekfaydalar(); }
 if (wdContext.currentContextElement().getOncelik() != "NULL")
 { oncelik1 = onceliktxt.toUpperCase(); }
 if (wdContext.currentContextElement().getUygulama() != "NULL")
 { uygulama = app.toUpperCase(); }
 InitialContext ctx = new InitialContext();
 javax.sql.DataSource ds =
 (javax.sql.DataSource) ctx.lookup("jdbc/SAPEPPDB");
 java.sql.Connection con = ds.getConnection();
 con.setAutoCommit(false);
 java.sql.Statement stmt = con.createStatement();
 String sql;
 int rows;
 sql = "insert into tmp_feedbacks " +
 "(puid, name, tel, email, company, konu, oncelik, uygulama, mesaj, onerikonusu," +
 "oneri_mdurum, oneri_odurum, oneri_bfaydalar,tarih,saat) " +
 "values ('" + username + "', " +
 "'" + name + "'," +
 "'" + tel + "'," +
 "'" + eposta + "'," +
 "'" + company + "'," +
 "'" + konutxt.toUpperCase() + "'," +
 "'" + oncelik1 + "'," +
 "'" + uygulama + "'," +
 "'" + message + "'," +
 "'" + onerikonusu + "', " +
 "'" + oneri_mdurum + "', " +
 "'" + oneri_odurum + "', " +
 "'" + oneri_bfaydalar + "', " +
 "'" + tarih + "', " +
 "'" + saat + "' " +
 stmt = con.createStatement();
 rows = stmt.executeUpdate(sql);
 con.commit();
 stmt.close();
 catch(Exception e){
 IWDMessageManager msgMgr =
 wdComponentAPI.getMessageManager();
 msgMgr.reportException(e.getMessage(),true);
 }
The value ctx.lookup("<jdbc_pool>"); depends on your system id.
if your system id is SID the the string has to be jdbc/SAPSIDDB
you can check it via visual admin >> server >> services >> jdbc con.

How to stop webdynpro runtime killing previous application resources

Similar Messages

Maybe you are looking for