How to store date in destination with dd-mmm-yy format in SSIS.

Hi,
I have an excel source where one of the column has date in it. I want to store this date into destination in DD-MMM-YY format in SSIS package.
Thanks and regards,
Anand.D.S.

Whats your destination?
If its SQLServer then I would say ita a bad idea to change the datatype for formatting. By default dates are stored as numerical data internally within SQLServer and would be displayed in YYYY-MM-DD format in SSMS. What you need to do is to store it as dates
and then wherever you want to display change the format in the way you want using formatting functions. If you dont have proper front end you can use CAST,CONVERT or FORMAT (SQL 2012) to get it in the format you want
Please Mark This As Answer if it solved your issue
Please Vote This As Helpful if it helps to solve your issue
Visakh
My Wiki User Page
My MSDN Page
My Personal Blog
My Facebook Page

Similar Messages

How to store data (in tdm files)

I'm looking for advice on how to store data in tdm/tdx files.
The main challenge is like this: At regular time intervals there is new data available (say every 10 minutes there are 10 minutes of new data available). All data is time based. So every ten minutes I may create a new tdm/tdx file containing this data segment. However, when i want to analyze the data i dont necessarily want to view 10 minutes of data from all channels, but maybe 20 hours of data from one particular channel.
The way I've achieved this so far is to manually load each 10 minute segment of this particular channel and then add these parts together. This is both time consuming and cumbersome. Is there a better way to do this that I've simply not discovered yet? Is there a better way to store data to simplify this process?
One solution is of course to save data from several 10-minute frames in one file, but seeing as there is a never ending supply of data i cant simply save all data in one giant file, it has to be split up at some point, and the problem will still remain.
One factor to have in mind here is that this is rather large amounts of data (maybe 10GB each day), so the option to simply load all the data into memory goes out the window rather quickly.
Feel free to ask if I've not made myself very clear

Hi salte,
If your test ever ended, and if you had LabVIEW 8.20 or higher, I would recommend using a TDMS file, which handles data appeands flawlessly. DIAdem 10.1 now also does data reduction and index windowing during file loading for TDM / TDMS / DataPlugin files, so that you could easily load out only the part of the file you wanted to look at. But since you describe your data acquisition as never stopping and amassing 10 GB per day, I agree that it would be impractical to use only 1 data file. So we are stuck with some number of files which each contain a part of your measurement. This approach can have advantages, since you can save operational properties for each "buffer" such as average value, dominant frequency, ambient room temperature, etc., and later on you can use the DataFinder to query out only the data buffers which meet specific conditions based on these properties. The problem remains to load and assemble data based on multiple files. This is an old problem in DIAdem, and one for which I have an efficient and I hope satisfactory workaround application. It does what you describe already doing in the minimum amount of time and with the minimum amount of user interaction, and it can be highly parametrized to suit your particular situation. The ideal way to start the application would be as part of a ResultsList custom menu. This would enable you to query out the buffers you wanted, highlight those rows in the ResultsList, right-click and choose your custom menu, and WHAM! the selected buffers for your queried channel(s) are automatically appended together in the DataPortal. Launching from a ResultsList custom menu would mean that you could skip the file dialog and just read out the data sources directly from the ResultsList selection.
Let me know what you think,
Brad Turpin
DIAdem Product Support Engineer
National Instruments
Attachments:
Importing Data from Multiple DataPlugin Files.zip ‏198 KB

How to store data in ipad from computer

please explain me how to store data (music video & pictures) in ipad from any personal computer...kindly explain me in simple steps...

The iPad can only sync with one computer. To do this you need to have iTunes installed on the computer and have it associated with your Apple ID. you can then use iTunes to transfer music, movies and pictures from that computer, and that computer only.
iOS: Syncing your data with iTunes
http://support.apple.com/kb/ht1386
If you need to get files from other computers, you would need a 3rd party App that can handle the formats you wish to transfer, and possibly transfer them either through iTunes file sharing or Wifi transfer depending on what the App supports.
iOS: About File Sharing
http://support.apple.com/kb/ht4094

How to fetch data from Mysql with SSL.

I am using jdk1.5 and mysql 5.0.
How to fetch data from Mysql with SSL
I am using url = jdbc:mysql://localhost/database?useSSL=true&requireSSL=true.
It shows error. how to fetch

I have created certificate in mysql and checked in mysql.
mysql>\s
SSL: Cipher in use is DHE-RSA-AES256-SHA
but through ssl how to fetch data in java.

What is a cube? how we store data in that? how we fetch data from cube?

Hi,
What is a cube? how we store data in that? how we fetch data from cube?
Regards.
venkat

>
venkey B wrote:
> Hi,
>
>
> What is a cube? how we store data in that? how we fetch data from cube?
>
>
> Regards.
>
> venkat
Hi Venkat,
I guess you mean an infocube from the SAP BI product. I propose to look at the forum for Business Intelligence to find your answers.
E.g. SAP POS DM writes the sales data in infocubes.....

How to store data from textfile to vector and delete a selected row.

Can someone teach me how to store data from textfile to vector and delete a selected row. And after deleting, i want to write the changes in my textfile.
Do someone has an idea? :)

nemesisjava wrote:
Can someone teach me how to store data from textfile to vector and delete a selected row. And after deleting, i want to write the changes in my textfile.
Do someone has an idea? :)What's the problem? What have you done so far? What failed?
What you described should be pretty easy to do.

How to store the 2d graphics with matrix?

Hello everybody,
I met a problem,and the question is "How to store the 2d graphics with matrix?".
who can help me?
Best wishes to all of you.
James Wei.

Hello,
It is possible to store the time in user variables. How to export those variables depends on the deployment of the file.
Some information about showing elapsed time can perhaps give you a start:
Display Time Information
Lilybiri

How LDAP stores data?

What is the diff bet. LDAP & Data base?
How LDAP stores data?

LDAP uses a hierarchical tree structure. This is why LDAP queries are formed like ldap://mydomain.com/...

How to save data model design in pdf or any format..?

how to save data model design in pdf or any format..?
i ve created design but not able to save it any mage or pdf format

File -> Print Diagram -> To PDF File

HOW TO GENARATE DATE LIKE 12 DEC 2007 USING xp20:format-dateTime(dateTime a

HOW TO GENARATE DATE LIKE 12 DEC 2007 USING xp20:format-dateTime(dateTime as string, format as string). PLEASE HELP.

If i look at the w3 org i would say :
xp20:format-dateTime('yourfield','[D]-[[MN,*-3]-[Y]')
or just MN will do too.

How to store data in JavaFX 1.2 Mobile with Storage and Resource API

I'm need to store some numbers and strings in an application that will be deployed in a HTC HD2 device with JavaFX 1.2 When run on desktop, everything works perfectly. But after being installed in the device, the application won't store data in files. I thought JavaFX was able to do that, according to its documentation (http://download.oracle.com/docs/cd/E17802_01/javafx/javafx/1.2/docs/api/javafx.io/javafx.io.Storage.html)
I do it like this (just the part that stores integers)
public var availableGifts : Integer[] = [0,0,0];
var highscoresFile = Storage {
source: "AvailableGifts.txt"
public function writeConfiguration() {
try {
var resource : Resource = configurationFile.resource;
var outputStream : DataOutputStream = new DataOutputStream(resource.openOutputStream(true));
outputStream.writeInt(availableGifts[0]);
outputStream.writeInt(availableGifts[1]);
outputStream.writeInt(availableGifts[2]);
outputStream.flush();
outputStream.close();
println("Data stored!");
} catch(ex : IOException) {
ex.printStackTrace();
The application is self-signed, just in case. But it won't store data in the mobile device... I need some help with this!

Agh, the problem is not in how data is stored, because it IS being stored. The problem is that inputstream.available() seems to always return 0 in the mobile device, so the file seems to be empty.
But that's a different problem.

How to store data from Host.vi in cRIO-9074

TejasKumar Patel
I implemented a advance Measurement and Control system using cRIO-9074
with c-Series I/O cards( NI 9217, 9411, 9264)
I have some questions about it,
(1)- Data rate from FPGA targate to host vi is too low. how can I increase
it, when I run my host VI, sometimes all temperature sensor update at
same time and sometimes one by one, can you please give me some hint, how
can I correct it, I used two FIFOs for NI-9411 digital pulses, I put all
Digital input and all analog output and input in a seperate while loop in
FPGA targate VI.
(2)- I have to write that data to analyse for further result. I tried all
possible way to write data including wite to spreadsheet.vi, write to
text.vi, Data storage.vi, Write to measurement.vi. All this VI work
efficientlywhen it run individualy, But when I connect this VI to
writedata from FPGA host VI. than it always give empty file.
I saw your post in NI discussion forum about how to write data from
Host.vi, But still I am confuse that how can I creat a protocol between
host VI and Fpga target vi. to write the data in a file. I have nearabout
38 channel to write data.
(3)- I have to measure time difference between two digital pulses, to find
a flow rate. I am using counter for it with risisng edge shot.vi, but when
i get a timestemp when there is risisng edge for the second rising edge
how can I get timestemp. Its like i have to measure time between two
pulses, I triend waveform measurement.vi to find cycle period. but it not
worked. any other was to measure it.
I am stuck in this question since from last one month. I already followed
NI-discussion forum solution but it doesnt work. I think the way I applied
is may be wrong.
Looking forward to hear from you soon.
Plese send an additional email copy to [email protected]
Thank you and Best Regards,

Thanks Joseph for your support,
1-      If I count the ticks between the pulses it always seems different ….because this method I already tried, but it does not work, like some times it shows 9099 tick and at the second pulse it shows like some more or less ticks not the same ticks every time. To complete my project, the biggest problem is the data storage.
2-      As you gives the solution in NI forum, “low level file I/O Vis such as Write to text file” FPGA target not support this VI. And mainly I want to write data from HOST.vi, because I am process those data …and I need to store it. For to figure out my result.
3-      If I use “Write to text file. VI (Sub-VI ) to FPGA.vi, it not support because it support string data and I have FIXpoint data. And can you explain me what is low level file IO, and how can I use in fpga.vi??
4-      Yes, for my project time stamp it really necessary, for data analysis.
5-      I need the time stamp to find out what was the system response at the time. As our project based on weather temperature, I need time stamp.
Waiting for your reply,
Thanks and Regards,
Patel

How to store date in database , taking cre of timezone

Hello java users
I have a user interface in which a user can pick a date, time and timezone.
Implemented simply.
start Date as a textbox: format - MM/dd/yyyy
start time as a textbox : format - HH/mm/ss
start timezone as a drop down. And currently there is only 3 values here: PST,EST,CST. As this is what we support.
I am using MSSQL and my date field column ( startdate ) is of type datetime.
Now how will I pass the correct value to the database.
Some more details.
I have a bean i which I am able to retrieve all the values.
public class MyBean implements serializable{
private Date startDate;
private Date startTime;
private String timezone; // this will store the timezone id selected by the user.
//getters and setters
Now, how will I combine all the values selected by the user and set in the bean and save it in the database.
I am sure there are a lot of times someone has tried to do this. But I am having a hard time finding this info in a collective manner.
Any help would be usefull
Thanks
Aayush

Its does help.
And yes it is requirement to get the date and time and the timezone info from the user through a UI.
And date is in format : MM/dd/yyyy
time is in format : HH:mm:ss
and there are 3 timezones : PST,EST,CST (And yes these are valid timezone ids).
I guess, the other way to put this is that - The user input is the way to get the StartTime data.
And ya it makes sense to have separate fields in the database to store date and timezone.
I am fairly new on this date part and its confusing me a little.
So I will go into a little more details.
As u suggested that it would be a good idea to have 3 separate fields for doing this.
you mean to have 3 fields in the database with columns like
1. startDate - datetime // to store the start date ( MM/dd/yyyy)
2. startTime - datetime // to store the start time ( HH:mm:ss). Is it possible to store only time in the database or are you suggesting to combine date and time in one database field.
3. startTimeZone - varchar // to store time zone.
So how do I achieve this.
lets say I get these values;
String startDate = "09/06/2008";
String startTime = "11:10:12";
String startTimeZone = EST;
now how will I store it in the database.
consider I have a java bean
public class StartTimeBean{
private Date startDate ;
private Date startTime ;
private String startTimeZone;
also I am using a OR mapping tool ( ibatis )
And I have my insert statement mapped to the bean StartTime.
Essentially what I am looking for a say method say , createTime(StartTimeBean startTimeBean )
so how will I store the info in the database

How to store data from a complex query and only fresh hourly or daily?

We have a report which runs quite slow (1-2 minutes) because the query is quite complicate, so we would like to run this query daily only and store in a table so for those procedures that need to use this complex query as a subquery, can just join to this table directly to get results.
However, I am not sure what kind of object I should use to store data for this complex query. Is data in global temp table only persist within transaction? I need something that can persist the data and be access by procedures.
Any suggestions are welcome,
Cheers

Thank you for your reply. I looked at the materialized view earlier on, but have some difficulties to use it. So I have some questions here:
1.The complex query is not a sum or aggregate functions, it just need to get data from different tables based on different conditions, in this case is it still appropriate to use meterialized view?
2.If it is, I created one, but how to use it in my procedure? From the articles I read, it seems I can't just query from this view directly. So do I need to keep the complex query in my procedure and how the procedure will use the meterialized view instead?
3. I also put the complex query in a normal view, then create a materialized view for this normal view (I expect the data from the complex query will be cache here), then in the procedure I just select * from my_NormalView, but it takes the same time to run even when I set the QUERY_REWRITE_ENABLED to true in the alter session. So I am not sure what else I need to do to make sure the procedure use the materialized view instead of the normal view. Can I query from the Materialized View directly?
Below in the code I copied from one of the article to create the materialized view based on my normal view:
CREATE MATERIALIZED VIEW HK3ControlDB.MW_RIRating
PCTFREE 5 PCTUSED 60
TABLESPACE "USERS"
STORAGE (INITIAL 50K NEXT 50K)
USING INDEX STORAGE (INITIAL 25K NEXT 25K)
REFRESH START WITH ROUND(SYSDATE + 1) + 11/24
NEXT NEXT_DAY(TRUNC(SYSDATE), 'MONDAY') + 15/24
enable query rewrite
AS SELECT * FROM HK3ControlDB.VW_RIRating;
Cheers

How to store data in JavaCard

Hi folks,
I have a basic question. I want to store data in Java card of each transaction in a log file. Each record contains some information. I'm wondering how to create this kind of file on java card and update log file for each new transaction.
Suppose that I want to store about 1000 maximal records in my log file (1000 transactions). From your experience working with Java card, could you please suggest me the way to do this task.
Thank you very much in advance.
Best regards,
JDL

I spent a little time searching over the internet and I read this document:
http://www.informatik.uni-augsburg.de/lehrstuehle/swt/se/teaching/fruehere_semester/ws0708/javacard/Dokumentation/JCADG.pdf
I try to explore whether my Java card support javacardx.framework package or not but unfortunately, it doesn't support this package. It means that I must build my own class to manage EF files.
Another try over the internet, I found a very useful example dealing with managing Cyclic file on Javacard. At the moment, I'm on the way designing and coding my own class and hope that it will work :-)
http://jcs.mobile-utopia.com/servlet/Source?type=s&q=CyclicFile
Thank you anyway your response, it would be helpful :-)
Best regards,
JDL
P.S. Jason Gosling, as far as I see, our names are totally different :-)

How to store date in destination with dd-mmm-yy format in SSIS.

Similar Messages

Maybe you are looking for