How to store documents in folder by date and name

to minimize document in folder and store by name and date

Hi Christoph,
Thank you for answer. I use existing mount point PC, I only changed path on
server01\SharedDir. When I making u2018Check inu2019 of my document then dialog screen to appears, I select storage data u2018Archiveu2019 here and I see storage category u2018A2u2019. My problem is in this storage category. Where I can make settings for this storage category or create the new?
I know that this category have been assigned in DC20 in u2018Define archivesu2019 as Name of Data Carrier. I select with F4 values that have name u2018Archive IDu2019, but I donu2019t know - where I can setup this Archive ID (change or create new)? Could you help me with it?

Similar Messages

  • I have a 2tb time capsule wondering how to store a lot of my files and photos on it to free up some space on my hard drive on my iMac

    i have a 2tb time capsule wondering how to store a lot of my files and photos on it to free up some space on my hard drive on my iMac

    For iMac please use USB or even better a FW800 or if you can afford it, a thunderbolt drive.. on your 2011 Mac.
    Time Capsule is not a suitable place to store your files.
    1. You will have no backup.
    2. TC cannot back itself up, nor can Time Machine backup network drives.
    3. Apple says specifically of iphoto not to store library on network drive.
    iphoto network no no.
    http://support.apple.com/kb/HT1198
    It's recommended that you store your iPhoto library on a locally mounted hard drive. Storing your iPhoto library on a network share can lead to poor performance, data corruption, or data loss.
    https://discussions.apple.com/thread/6692100
    4. Other libraries may not corrupt but will run very slowly. iTunes for example.
    Please purchase the fastest drive out of the external ports you have available.. usb2 although the slowest is still faster than TC over gigabit. It is also more reliable. TC are not a noted reliable storage drive. It is designed as a backup location for TM files.

  • How can I get rid of the dates and time on my Notes

    How do I get rid of the dates and times on my Notes that appeared when I updated to 8?

    Yes, it's seems like a poor design decision.
    By putting the date on the line below the Note title in the Notes Index, the app shows half the number of notes per page AND if you have a large number of notes, it takes twice as long to stroll down.
    I doubt the designer actually uses the app. 
    TSAW

  • HT204053 I have a school ipad with iCloud using a different ID (my school email address) . I am leaving and want to buy my own ipad and transfer all my data and docs to my personal iCloud account but don't know how to do this without deleting all data and

    I have a school ipad with iCloud using a different ID (my school email address) . I am leaving and want to buy my own ipad and transfer all my data and docs to my personal iCloud account but don't know how to do this without deleting all data and photos?

    Heya Katie!!
    So, the article you have there, HT4895, is pretty good. Just look at the FAQ section of it.
    But basically, you will want to create a backup on your computer through iTunes...Just plug your current iPad into it and make sure your iPad and iTunes are logged in with the same Apple ID. At that point, just create a backup.
    When you get your new iPad, and before you plug it in or set it up, follow the directions in this link to change your Apple ID. http://support.apple.com/kb/HT5621?viewlocale=en_US
    Once you have that done, plug your new iPad into your computer to sync up with iTunes. Follow the directions for Restore from Backup and it should bring all that info back to your new iPad.
    And changing your Apple ID email info will allow you to have your own!!! This should solve all your issues and GL!!!

  • How do i find out the purchase date and my coverage plan?

    how can i find out the purchase date and my coverage plan on my ipad?

    Try here for the warranty coverage. Your date of purchase would be tied to wherever you bought the device.
    https://supportprofile.apple.com/

  • How to get fiscal period based on date and Fiscal year?

    Hi Guys,
               Can anybody tell me how to get Fiscal period based on date and Fiscal Year or fiscal year variant?
    Thanks,
    Gopi.

    Hi,
    Please refer the code below:
    *: Report:  ZFISCALYR                                                  :
    *: Date  :  2004                                                       :
    *: Description: Demonstrates how to return the corresponding fiscal    :
    *:              year and posting period for a company code and posting :
    *:              date or posting date and fiscal year variant.          :
    REPORT  zfiscalyr NO STANDARD PAGE HEADING.
    TABLES: ekko.
    PARAMETERS:     p_bukrs TYPE ekko-bukrs,
                    p_bedat TYPE ekko-bedat.
    DATA: gd_fiscalyr  TYPE bapi0002_4-fiscal_year,
          gd_fiscalp   TYPE bapi0002_4-fiscal_period.
    DATA: gd_fiscalyr2 TYPE T009B-BDATJ,
          gd_fiscalp2  TYPE bapi0002_4-fiscal_period.
    DATA: gd_periv     TYPE t009-periv.
    *START-OF-SELECTION.
    START-OF-SELECTION.
    * get fiscal year and period - (requires date and company code)
      CALL FUNCTION 'BAPI_COMPANYCODE_GET_PERIOD'
        EXPORTING
          companycodeid = p_bukrs
          posting_date  = p_bedat
        IMPORTING
          fiscal_year   = gd_fiscalyr
          fiscal_period = gd_fiscalp.
    * Alternative fiscal year function module
    * - (requires date and fiscal year variant code from T009 table)
    * gets first entry in fiscal year variant table (will need to choose
    * correct one from table rather than just using first entry)
      SELECT SINGLE periv
        FROM t009
        INTO gd_periv.
    * get fiscal year and period
      CALL FUNCTION 'DETERMINE_PERIOD'
        EXPORTING
          date                      = p_bedat
    *    PERIOD_IN                 = '000'
          version                   = gd_periv
       IMPORTING
          period                    = gd_fiscalp2
          year                      = gd_fiscalyr2
       EXCEPTIONS
          period_in_not_valid       = 1
          period_not_assigned       = 2
          version_undefined         = 3
          OTHERS                    = 4.
    *END-OF-SELECTION.
    END-OF-SELECTION.
      WRITE:/ 'From function module: BAPI_COMPANYCODE_GET_PERIOD',
            / 'Fiscal year is:', gd_fiscalyr,
            / 'Fiscal period is:', gd_fiscalp.
      SKIP.
      WRITE:/ 'From function module: DETERMINE_PERIOD',
            / 'Fiscal year is:', gd_fiscalyr2,
            / 'Fiscal period is:', gd_fiscalp2.
    Thanks,
    Sriram Ponna.
    Edited by: Sriram Ponna on Apr 17, 2008 8:59 PM

  • Date and Name prompt

    Dear All,
    I have one dashboard prompt Date and Name.
    In date prompt default to i set Select max(date) fron TN.
    Based on max date the first name should be default to name prompt.
    How will do this.
    I tried below ways,
    I set Date and Name prompt set into constrain.While set constrain the date prompt it shows correct but name shows blank.
    In name default to can i implement any logic or ?
    Thanks

    My requirment like:
    I have one dashboard prompt Date: Name:
    Date prompt i set default to Select max(date) fron TN.
    Based on date prompt name should be changed automatically that's why i selected constrain option.
    E.g
    Table
    Date Name
    24/02/2011 AA
    24/02/2011 BB
    24/02/2011 CC
    23/02/2011 BB
    23/02/2011 DD
    23/02/2011 EE
    23/02/2011 FF
    22/02/2011 GG
    When i open my dashboard need to display like below prompts default values.
    Date:24/02/2011 Name:AA
    After when i select Date prompt: 23/02/2011 then Name should be : BB
    similarrly Date;22/02/2011 Name: GG
    How will do this.
    I tried date prompt is working fine( Default to: Select max(date))
    But name is not replicated in name prompt.It show blank
    Thanks

  • Project Server 2010 - Modification date and name of the person who made the last change in the project

    Hello everybody
    I'm with a doubt.
    I got in the business
    environment Project Server 2010 and
    would like to get the publication date,modification
    date and name
    of the person who made
    the last change in
    the project. It is possible
    to doby the native
    resources or is
    there any query in
    SQL Server to perform a
    query of this information.
    Thank you.
    Obrigado por contactar o fórum Microsoft Technet!

    Hi Hezequias,
    You can get the ProjectModifiedDate column in MSP_EPMProject_userView in the Reporting DB where you can
    get the data based on the projectUID. 
    The "last saved" date in the draft DB (be aware that querying in the draft DB is not supported by MS).
    For the "last modified by", I think it is not stored in any place.
    But you can develop custom code upon publishing the project (Event BeforePublish), writing the current
    date and username automatically into a custom enterprise field.
    Hope this helps,
    Guillaume Rouyre, MBA, MCP, MCTS |

  • PowerShell Script to get the details Like Scope,Last Deployed date and Name for a Solution Deployed in the Farm.

    Hi Experts,
    I am trying to  build a PowerShell Script to get the details Like Scope,Last Deployed date and Name for a Solution Deployed in the Farm.
    Can anyone advise on this please.
    Regards

    Get-SPSolution|Select Name,Scope,LastOperationResult,LastOperationEndTime|Export-CSV "SPInstalledSolutions.csv" -NoTypeInformation
    SPSolution properties
    Get-SPSolution
    This post is my own opinion and does not necessarily reflect the opinion or view of Slalom.

  • How to store documents in  SOLMAN DB

    Hi Gurus,
    I have uploaded some word document in the milestone called Business Blue print Completion in the project documentation tab.
    But it is getting stored in the Temp location in the stand alone system.It is not getting stored in to SOLMAN DB.
    How to store it in  SOLMAN DB. So that we can access from any system.
    Pl advice.

    Hi sapuser_s,
    I guess you should be aware by now, that the supposed Central place where it stores the documents is Knowledge Warehouse.
    By centralising do you mean to store them on a webserver  and not on KW of SolMan?
    If so, did you try this option?:
    SPRO
    SAP Solution Manager -> Configuration -> Scenario-specific settings -> Cross-scenario settings -> Document Management -> Display Solution Manager Documents from External Application
    Best regards,
    Srini

  • How to store documents in my ipad

    I received few word documents via gmail.
    How to save those documents to my ipad?
    and am unable to attach documnet to my mail..
    Kindly advice.

    If you want to store word documents (or any other file/document) on the iPad then you need one or more apps on the iPad that supports word documents - unlike a 'normal' computer the iPad doesn't have a file system, and everything on it has to be associated with an app.
    If you want to be able to edit (and create) word documents then the options include Apple's Pages app and from third-parties apps such as Documents To Go and QuickOffice Pro HD. If you just want to store them then there are apps such as GoodReader. You can use the Mail app's 'open in' function to copy/store attachments into other apps.
    To then attach a document to an email you need to start in the app that contains the document and use that app's functionality (if it has it) to select and attach the document to an email.

  • How to create a new folder with a different name everyday

    Hello everybody,
    I have another question if you don't mind. But first thank you again to V.K and red menace for helping me with the my previous post.
    This is actually the same project, I just keep on seeing new obstacles when I'm almost done.
    Below is my workflow. My workflow is exporting a quicktime movie to a folder in our server.
    What I need to do at the end is to move the exported file into a folder but a folder needs to be created and it has to change at about midnight everyday.
    For example today the file will go to Server>Client folder>File folder named 09-04-2008
    Then the next day, I need to put the new exported files to Server>Client folder>File folder named 09-05-2008.
    First, how can I create a sequential named folders and second how can I tell Automator to put the files in the right folders. This process is a 24 hour process.
    Thanks for you future help.
    Helmut
    1) Get Specified Finder Items (Pointing to File Folder)
    2) Get Folder Contents (tried checked and uncheck on Repeat for each subfolder
    3) Get Specified movie ( I guess Filter finder items and choose .mov will work too)
    4) Quicktime Export (exporting it to the Exported Folder)
    5) Get Specified Finder Items (Pointing to File folder to get to the original file)
    6) Get Folder Contents
    7) Filter Finder Items (choose .mov)
    8) Move Finder Items ( pointing to Archive Folder to move the original file)
    9) Get Specified Finder Items (Pointing to Exported Folder)
    10) Get Folder Contents
    11) Filter Finder Items (.mov)
    12) Move Finder Items (Pointing to Server Folder)

    It doesn't look like there is an easy way to do this. The sort and filter actions don't let you use variables, and I haven't found any actions that will alter a list. Making a text file with the name of the newest folder seems kind of clunky, but it is an option.
    What I was thinking about was an action that would take the first item in a list - then you could get your backup folders, sort by creation date, and just take the top one in the list (the newest one). Hmmm - this should be fairly straight-forward, so maybe I'll write an action
    In the mean time, give the Run AppleScript action in the following workflow a try.
    Tested workflow:
    1) Ask for Finder Items (Type: Folders)
    2) Get Folder Contents
    3) Sort Finder Items (by creation date in ascending order)
    4) Run AppleScript (the following script)
    <pre style="
    font-family: Monaco, 'Courier New', Courier, monospace;
    font-size: 10px;
    margin: 0px;
    padding: 5px;
    border: 1px solid #000000;
    width: 720px;
    color: #000000;
    background-color: #FFDDFF;
    overflow: auto;"
    title="this text can be pasted into an Automator 'Run AppleScript' action">
    on run {input, parameters}
    return the first item in the input list
    input: a list of anything
    output: the first item, or {} if none or error
    set output to {}
    try
    set the end of the output to the first item of the input
    end try
    return output
    end run</pre>
    5) View Results
    The above workflow should return the newest item in the selected folder.

  • How can you determine a file creation date and know if it's been altered since the creation date

    I need to know how to determine a file creation date on an ipad.  If someone creates a document/note on an ipad how can you tell when it was created and if it has been altered since?

    Unless you are using a third party app that provides that functionality, in iOS the only thing youcan access is the last edit/save date and time, which is fairly evident in the user interface for documents and notes. Some apps that handle MS Office files may provide that, but ican't say first hand.

  • How do I delete duplicate songs? (date and time stamp are identical

    I put my cd collection in itunes and now have duplicates of most songs (don't know how I did that). The duplicates have the exact same date and time, so the method to delete a "newer" duplicate will not work. Is there a simple way to delete exact duplicates from the itune library?

    This application can help.  It's US$15.  http://dougscripts.com/apps/dupinapp.php

  • How can we update the last synchronization date and time..on SUP in sccm 2012 R2

    Hi,
        Can you any one please guide me how can i update the last  synchronization date & time in SUP on SCCM2012 r2 , some how its updated as future date and when ever i try to synch the SUP with disconnected WSUS its shows in the wsyncmgr.log 
    "Wakeup for a polling cycle " and  " Wakeupby inbox drop" and "Wakeup by SCF change"  
    Thanks 
    Balaji K

    You'll probably have to call CSS on this one as this not normal by any means. The messages you noted above are completely normal but if that's all you are seeing then there's an issue.
    Have you reviewed wcm.log and wsusctrl.log?
    Jason | http://blog.configmgrftw.com | @jasonsandys

Maybe you are looking for