How to store Invalid Dates in SQL Server 2008
Hi,
I have SQL Server 2008 and My table has start_Date and end_date column which is DATETIME datatype.
Somehow my table is having invalid dates which is lesser than 1753-01-01 00:00:00.0 range.
I want to know how this date get inserted in the SQL Server.
Thanks,
Muthuprabhu
Can you post the DDL for that table together with a SELECT query and results demonstrating invalid data?
DECLARE @dt DATETIME = '1753-01-01 00:00:00.0';
-- Command(s) completed successfully.
DECLARE @dt DATETIME = '1752-01-01 00:00:00.0';
Msg 242, Level 16, State 3, Line 4
The conversion of a varchar data type to a datetime data type resulted in an out-of-range value.
Datetime conversion:
http://www.sqlusa.com/bestpractices/datetimeconversion/
Kalman Toth Database & OLAP Architect
SQL Server 2014 Database Design
New Book / Kindle: Beginner Database Design & SQL Programming Using Microsoft SQL Server 2014
Similar Messages
-
How to only migrate data from SQL Server 2008 to Oracle 11?
According to our requirement, We need to only migrate data from a SQL Server database to an existed
Oracle database user.
1) I tried to do it with SQL Developer 3.0.04 Migration Wizard, But find an issue.
My SQL Server database name is SCDS41P2, and my Oracle database user name is CDS41P2;
When I used SQL Developer to do offline move data by Migration Wizard, I found all oracle user
name in movedata files which gotten by run Migration Wizard
is dbo_SCDS41P2. If the Oracle user name is not the same as my existed Oracle user name,
the data can't be moved to my existed Oracle user when I run oracle_ctl.bat in command line window.
So I had to modify the Oracle user name in all movedata files, but it's difficult to modify them because there are many tables in
databases. So could you please tell me how to get the movedata files which the oracle user name in them is my
expected Oracle user name?
2) I also tried to use the 'copy to Oracle' function to copy the SQL Server database tables data
to the existed Oracle database user. When clicked 'copy to Oracle', I selected 'Include Data' and 'Replace' option
But I found some tables can't be copied, the error info is as below:
Table SPSSCMOR_CONTROLTABLE Failed. Message: ORA-00955: name is already used by an existing object
Could you please tell me how to deal with this kind of error?
Thanks!
Edited by: 870587 on Jul 6, 2011 2:57 AMHi,
Thanks for you replying. But the 'copy to oracle' function still can't be work well. I will give some info about the table. I also search 'SPSSCMOR_CONTROLTABLE' in the target schema, and only find one object. So why say 'name is already used by an existing object'? Could you please give me some advice? Thanks!
What is the 'Build' version of your SQL*Developer ?
[Answer]:
3.0.04
- what does describe show for the SPSSCMOR_CONTROLTABLE in SQL*Server ?
[Answer]:
USE [SCDS41P2]
GO
/****** Object: Table [dbo].[SPSSCMOR_CONTROLTABLE] Script Date: 07/18/2011 01:25:05 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
CREATE TABLE [dbo].[SPSSCMOR_CONTROLTABLE](
[tablename] [nvarchar](128) NOT NULL,
PRIMARY KEY CLUSTERED
[tablename] ASC
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY]
) ON [PRIMARY]
GO
- what does describe show for the SPSSCMOR_CONTROLTABLE in Oracle ?
[Answer]:
-- File created - Monday-July-18-2011
-- DDL for Table SPSSCMOR_CONTROLTABLE
CREATE TABLE "CDS41P2"."SPSSCMOR_CONTROLTABLE"
( "TABLENAME" NVARCHAR2(128)
) PCTFREE 10 PCTUSED 40 INITRANS 1 MAXTRANS 255 NOCOMPRESS LOGGING
STORAGE(INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645
PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT)
TABLESPACE "USERS" ;
-- DDL for Index SYS_C009547
CREATE UNIQUE INDEX "CDS41P2"."SYS_C009547" ON "CDS41P2"."SPSSCMOR_CONTROLTABLE" ("TABLENAME")
PCTFREE 10 INITRANS 2 MAXTRANS 255 COMPUTE STATISTICS
STORAGE(INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645
PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT)
TABLESPACE "USERS" ;
-- Constraints for Table SPSSCMOR_CONTROLTABLE
ALTER TABLE "CDS41P2"."SPSSCMOR_CONTROLTABLE" MODIFY ("TABLENAME" NOT NULL ENABLE);
ALTER TABLE "CDS41P2"."SPSSCMOR_CONTROLTABLE" ADD PRIMARY KEY ("TABLENAME")
USING INDEX PCTFREE 10 INITRANS 2 MAXTRANS 255 COMPUTE STATISTICS
STORAGE(INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645
PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT)
TABLESPACE "USERS" ENABLE;
Edited by: 870587 on Jul 18, 2011 1:42 AM -
Please tell how to store jpeg images in SQL Server using NI Database Connectivity Toolset.
http://www.w3schools.com/sql/sql_datatypes.asp
You setup a field as BLOB and store the binary of the picture there. Depending on the database it can be called differently as you can see in the link, in SQL server there's even a Image datatype.
/Y
LabVIEW 8.2 - 2014
"Only dead fish swim downstream" - "My life for Kudos!" - "Dumb people repeat old mistakes - smart ones create new ones."
G# - Free award winning reference based OOP for LV -
How to store 999999999.00000000 in sql server through ssis package?
I have a field with 999999999.00000000 value of datatype double ?
How to store it in ms sql server 2005 db through ssis package ?
give me details if I have to use derived columns and what to write over there.
please write in details as I am new to SSIS.
Thanks in Advance.The value is coming from informix db .
Can u please suggest hw to write it in my package :
I have taken a OLE DB Source and wrote the follwing command :
" select CASE WHEN T1.t_maxs IS NULL THEN 0.00 ELSE T1.t_maxs END as max_inv
from ttiitm001010 T1 ".
Please give details, as i am new ... -
How to load oracle data into SQL SERVER 2000?
how to load oracle data into SQL SERVER 2000.
IS THERE ANY UTILITY AVAILABLE?Not a concern for an Oracle forum.
Als no need for SHOUTING.
Conventional solutions are
- dump the data to a csv file and load it in Mickeysoft SQL server
- use Oracle Heterogeneous services
- use Mickeysoft DTS
Whatever you prefer.
Sybrand Bakker
Senior Oracle DBA -
How to enable remote connections in SQL Server 2008
I'm trying to enable remote connections in SQL Server 2008 R2 as described in the following article. I see the error message at the top of the article.
http://blogs.msdn.com/b/walzenbach/archive/2010/04/14/how-to-enable-remote-connections-in-sql-server-2008.aspx
One step in the article describes how to enable TCP/IP in Configuration Manager. Specifically it says that
'SQL Server NETWORK Configuration' should have TCP/IP enabled.
The issue I've encountered is that my Configuration Manager
is different than what appears in the article. My Configuration Manager shows the following:
SQL Server 2005 Services
SQL Server 2005 Network Configuration (32 bit)
- Protocols for SQLExpress
SQL Native Client Configuration (32 bit)
- Client protocols
- Aliases
Note that I see 'SQL Server 2005 Network Configuration'
rather than that for 2008. When 'Protocols for SQLExpress'
is expanded, there is a TCP/IP setting, but it's disabled and I see an
Access Denied message if I try to enable this.
I also see a TCP/IP setting under Client protocols and successfully enabled this. This uses port 1433 and I configured my firewall to accomodate this port as suggested in the article.
I also followed the other steps in the article, but still don't have remote access to SQL Server 2008 R2. (I can access it from the office.) I'm wondering if this remote access issue is because SQL Server
2008 Network Configuration does not appear in Configuration Manager
and if so, I'm interested in how this might be resolved. (I'm running Windows 7 - 64 bit.)
I'd appreciate any ideas on this. Thanks.Hello,
Please refer to the following resource.
http://support.microsoft.com/kb/KbView/914277
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com -
How to store Marathi Character in SQL server?
I am going to design a application having front end with VB.Net and Back end with SQL SERVER in. And I want the complete interface of that
application in marathi language.
when I enter the marathi character in data base and execute it, it shows "????????" like this.
What I do to enter and store the marathi character in Database?Are you saying in application it is showing ???? ? In that case check the locale? If you are seeing this behaviour in DB Check this
create table test(col nvarchar(22))
insert test SELECT N'नमस्कार'
insert test SELECT 'नमस्कार'
select *from test
BTB... Namaskar DAN... :)
Madhu
MCITP, MCTS, MCDBA,MCP-- Blog : http://experiencing-sql-server-2008.blogspot.com/ -
How to compare 2 dates in SQL Server 2000 DB using Java?
How do you compare 2 dates in SQL Server 2000 DB using Java?
Let's say we have two fields: Date Reported and Target Finish Date.
Date Reported is 09-10-2004 09:55:55: PM
Target Finish Date is 09-12-2004 11:59:59: PM
What i want to happen is i want to convert both dates to days and get the difference of the two.
can SQL Server 2000 DB do this?it doesnt wrk.
ok here's what i did:
iv tested a simple code for this case.
I created a table name tblDate which has 3 columns namely date_ID, date_From (datatype datetime), date_To (datatype datetime).
I inserted 1 row: date_ID has the value 1, date_From has the value 10/22/2004, and date_To has the value 10/24/2004.
i run the java code below:
int days = 0;
String query = "SELECT date_From, date_To cast(date_From-date_To AS int) AS Diff FROM tblZoo WHERE date_ID = '1'";
try
DBConnect db = new DBConnect();
db.openCon();
ResultSet rs = db.execute(query);
while(rs.next())
days = rs.getInt("Diff");
db.closeCon();
catch (Exception ex)
System.out.println("Error on Execution: " + ex);
return days;___________
an error occurred: Error on Execution: java.lang.nullpointerexception -
How to extract incremental data from SQL server to oracle tables in ODI
HI All,
In my ODI sql server is install.My Source is in SQL server and my target is in Oracle.
I need to create a interface mapping where i need to extract incremental data from sql server to oracle.
There is a datetime(with Timestamp) field in sql server .I need to pull incremental data based on dateime.
Example = tablename.DateTime > (select '1-jan-11' from dual) .....i am using this query but its not woking.the error is Invalid object name"dual".
We are not going to use Incremental in IKM and LKM.
Request you to please provide any suggestion ASAP.
Thanks,
LonyYou can do that via Variable.
In the interface mapping create a filter on Tablename.DateTime
and put the condition like this
Tablename.DateTime BETWEEN #VAR and in the variable use this query in refreshing tab with oracle schema
SELECT max(start_time)||' AND '||max(END_TIME)+1 from audit_table where ETL_JOB_CODE = '20'In the package call the above variable in refresh mode and then interface.
This way you will pass from the query between and condition date and pass to interface so that SQL Server fetches the data between those too range.
Note:- You might need to tweak the date format so that SQL Server can understand.
Hope this helps. -
How can I migrate data from SQL Server 6,5 to Oracle 8?
We have a web site based on Microsoft SQL Server 6.5.Now we plan
to migrate the database to Oracle 8.
We have redesigned the tables structure and created tables under
Oracle 8, so we only need to migrate data from SQL Server.
We've exported data from SQL Server to text files.
How can we import data from files and restore to Oracle tables.
Is there a solution which let us to import data for particular
table columns,not all columns?
We'll be appreciated if somene can give suggestions.
Regards
Michael
nullThank you for your reply.
I'll try the Oracle sqlloader utility first.
Regards
Micahel
Oracle Migration Workbench Team wrote:
: Michael,
: Oracle sqlloader is user for this sort of operation, see
: Oracle8i Utilities
: Release 8.1.5
: A67792-01
: available online through Oracle Technology Network.
: The Oracle Migration Workbench can be used to create bcp and
: sqlloader scripts, though since you have altered the schema
these
: scripts would need to be altered by hand after generation.
: Some thought has been put into redesigning table structures in
: the Oracle Migration Workbench, but currently it looks like
this
: reengineering will be left to be done by other tools, eg
Oracle
: Designer, once the SQLServer database has been duplicated with
as
: little change as possible onto Oracle.
: Hope that helps,
: Turloch
: Oracle Migration Workbench Team
: Michael (guest) wrote:
: : We have a web site based on Microsoft SQL Server 6.5.Now we
: plan
: : to migrate the database to Oracle 8.
: : We have redesigned the tables structure and created tables
: under
: : Oracle 8, so we only need to migrate data from SQL Server.
: : We've exported data from SQL Server to text files.
: : How can we import data from files and restore to Oracle
tables.
: : Is there a solution which let us to import data for
particular
: : table columns,not all columns?
: : We'll be appreciated if somene can give suggestions.
: : Regards
: : Michael
: Oracle Technology Network
: http://technet.oracle.com
null -
How to attach .mdf file to sql server 2008 EXPRESS
I have .mdf files created using SQL SERVER management studio 2012 in another computer and wish to attach the same to SQL SERVER 2008 EXPRESS in another computer. How should I do so? I tried this method :How
to: Attach a Database File to SQL Server Express but then it shows an error that the database cannot be created due to compatibility issues.
Msg 948: The database xyz cannot be opened because it is version 706. This server supports version 655 and earlier. A downward path is not supported..
Any help??I have .mdf files created using SQL SERVER management studio 2012 in another computer and wish to attach the same to SQL SERVER 2008 EXPRESS in another computer. How should I do so? I tried this method :How
to: Attach a Database File to SQL Server Express but then it shows an error that the database cannot be created due to compatibility issues.
Msg 948: The database xyz cannot be opened because it is version 706. This server supports version 655 and earlier. A downward path is not supported..
Any help??
You are trying to attach SQL Server 2012 database files to SQL Server 2008 R2 which is not allowed, you either need to upgrade your SQL Server 2008 to 2012 or alternatively you can generate all scripts from SQL Server 2012 and execute it in SQL Server
2008 R2.
You can refer below link to how to generate script.
http://blog.sqlauthority.com/2012/07/18/sql-server-generate-script-for-schema-and-data-sql-in-sixty-seconds-021-video/
Please mark solved if I've answered your question, vote for it as helpful to help other users find a solution quicker
Praveen Dsa | MCITP - Database Administrator 2008 |
My Blog | My Page -
How to Configure Remote Connections To SQL Server 2008 R2 Express
Post written June 10, 2010 and pertains to:
SQL Server 2008 R2 Express on both my server and local machines: SQLX_SRV,
SQLX_LOC
SQL Server 2008 R2 Management Studio on both my server and local machines:
MS_SRV, MS_LOC
Windows Server 2008 R2 Enterprise installed on a Hyper-V VPS: WS
SQL Server Configuration Manager on both my server and local machines:
CMGR_SRV, CMGR_LOC
Server Manager: SMGR
I am connecting to my hosting server via Remote Desktop Connection: RDC
I installed SQLX_SRV and MS_SRV on my hosting server and SQLX_LOC and MS_LOC on my local development machine. I am able to use MS_LOC to connect to SQLX_LOC and to use MS_SRV to connect to SQLX_SRV. However I am not able to use MS_LOC to connect
with SQLX_SRV. Here's what I have done so far:
SMGR -> Configuration -> Windows Firewall to turn off the Windows Firewall for Domain, Private and Public profiles. Obviously I'll change this later, but until I can connect I want to remove as many variables as possible.
CMGR_SRV -> SQL Server Services to confirm that both SQL Server (SQLEXPRESS) and SQL Server Browser services were running.
CMGR_SRV -> SQL Server Network Configuration -> Protocols for SQLEXPRESS to ENABLE the Shared Memory, Named Pipes, and TCP/IP protocols and DISABLE the deprecated VIA protocol.
CMGR_SRV -> SQL Server Network Configuration -> Protocols for SQLEXPRESS -> double click TCP/IP to open the TCP/IP properties dialogue. On the Protocol tab Enabled: Yes, Keep Alive: 30000, changed Listen All to No. I've tried it both
ways, but I've got six IP addresses on my server and I wanted to configure SQLEXPRESS to listen to only the first and primary IP. On the IP Addresses tab went to IPALL and cleared the TCP Dynamic Ports field and entered 1433 in the TCP Port field.
For my first and primary IP Address I made sure that Enabled was Yes, I cleared the TCP Dynamic Ports field, and entered 1433 in the TCP Port field. For all other IP Addresses Enabled was set to No and I cleared both the TCP Dynamic Ports and TCP Port
fields.
CMGR_SRV -> SQL Server Services -> SQL Server (SQLEXPRESS) right click and Restart. This of course stopped and restarted my instance of SQLX_SRV enabling the TCP/IP configuration in the previous step to take effect.
On my server, SQLX_SRV is the only instance of SQL Server running and so it's easy to hard wire it to the default port 1433.
The instance name for both SQLX_SRV and SQLX_LOC is the default "SQLEXPRESS". My server machine name is "SERVER1" on the EnglishBrains.com domain. So the proper local name (local within the context of my remote server as connected via RDC) for
my instance of SQLX_SRV would be:
SERVER1\SQLEXPRESS
Note the use of a backslash NOT a forward slash.
Of course to connect remotely from my development machine, which is not on the same domain as my hosting server, I would need to specify the domain as well, so the SQL Server name becomes:
SERVER1.EnglishBrains.com\SQLEXPRESS
I must also use SQL Server Authentication. Before I can use such a remote connection, however, there are still several configuration steps required. So on my server (connected via RDC) I used MS_SRV to connect to SQLX_SRV using SERVER1\SQLEXPRESS
for the server name and Windows Authentication. Once connected I performed the following steps:
MS_SRV -> right click the connected parent SERVER1\SQLEXPRESS instance node at the top -> Properties -> Security -> Server authentication: select "SQL Server and Windows Authentication mode". This will enable connections using either type
of authentication.
Next, leaving the Server Properties dialogue open, Connections -> check "Allow remote connections to this server" box.
Click OK to save these changes and close the Server Properties dialogue.
MS_SRV -> Security -> right click Logins and select "New Login...", the Login - New dialogue opens.
On the General page Enter a name for your new login
Select SQL Server Authorization
Enter and confirm a password
Uncheck Enforce password expiration
Select the default Database and Language
On the ServerRoles page Public will be checked, also check SysAdmin. This is probably not a good idea and I'll uncheck this as soon as I can connect to the SQLX_SRV.
On the User Mapping page select the databases you want your new Login to access and enter the Default Schema of "dbo".
At the bottom of the User Mapping page you'll see the Database Roles table. Public will be selected by default. Also select db_Owner. Again this is probably not a good idea, and I'll refine this once I can connect.
On the Status page confirm that "Grant" is checked under "Permission to connect to database engine" and "Enable" is checked under "Login".
Click OK to save all changes and close the Login - New dialogue.
With these steps completed you should now be able to use MS_SRV to connect to SQLX_SRV using SQL Server Authentication by supplying the name and password for your new Login. I tried this and it worked fine. Next I tried to use this same login
remotely, that is I went to my local development machine and used MS_LOC to try and connect to SQLX_SRV by using
SERVER1.EnglishBrains.com\SQLEXPRESS
and opting for SQL Server Authentication and supplying the name and password of my new login.
THIS DID NOT WORK?? Instead I get the following error message:
Cannot connect to SERVER1.EnglishBrains.com\SQLEXPRESS.
A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider:
SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified) (Microsoft SQL Server, Error: -1)
For help, click:
http://www.microsoft.com/products/ee/transform.aspx?ProdName=Microsoft+SQL+Server&EvtSrc=MSSQLServer&EvtID=-1
If you follow the suggested help link, you are told:
The SQL Server client cannot connect to the server. This error could be caused by one of the following reasons:
A specified SQL Server instance name is not valid.
The TCP, or named pipes protocols are not enabled.
The firewall on the server has refused the connection.
The SQL Server Browser service (sqlbrowser) is not started.
WRONG on all 4 counts! The instance name IS valid. Both TCP/IP and Named Pipes protocols are enabled. The firewall has been shut down, so it is not relevant. Finally the SQL Server Browser IS started.
The next thing I tried was to circumvent discovery by the SQL Browser service by using the following syntax to specify the IP address and port directly when specifying the SQL Server name.
tcp:68.71.134.186,1433
Using this in the Server Name field I was able to use MS_SRV to successfully connect to SQLX_SRV (using SQL Server Authentication of course) with or without the SQL Browser service running.
However when I tried to connect from MS_LOC to SQLX_SRV using this same login (WITH SQL Browser service running just for good measure) it does not work?? I get the following error message:
Cannot connect to tcp:68.71.134.186,1433.
A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider:
TCP Provider, error: 0 - A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond.) (Microsoft SQL Server, Error: 10060)
For help, click:
http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&EvtSrc=MSSQLServer&EvtID=10060&LinkId=20476
If you follow the help link you are told:
"The SQL Server client cannot connect to the server. This error could occur because either the firewall on the server has refused the connection or the server is not configured to accept remote connections."
However, the firewall has been shut down and the server HAS been configured to accept remote connections!
I confirmed that i could indeed Ping to 68.71.134.186 and running NetStat -a |find /i "listening" on the server shows that the server is indeed listening at 68.71.134.186 Port 1433 -- which is why I was able to connect to SQLX_SRV using MS_SRV with
tcp:68.71.134.186,1433 .
IN SUMMARY: Even though I can connect to my SQLEXPRESS instance multiple ways from the server itself, I cannot connect remotely from my development machine!
If anyone can help me figure out why I would be very, very grateful!My two cents to help you out on c# code example to configure the remote sql server express.
Hope it helps. It works, but you have to be extra carefull to read it all and setup the server configuration and netsh commands; also the port fowarding on the router.
using System;
using System.Collections.Generic;
using System.Linq;
using System.Text;
using System.Data.SqlClient;
namespace sqlremoteconnection
class Program
static void Main(string[] args)
// this is the local sql server connection
// 192.168.1.101\SQLEXPRESS
// now, the configuration for remote access:
// activate SQL SERVER BROWSER - set it to start "automatic"; then START UP
// SQL Server Configuration Manager
// --> SQL SERVER BROWSER -> properties -> Service -> Start Mode -> automatic -> apply
// --> Log On -> Start -> Ok
// netsh firewall set portopening protocol = TCP port = 1433 name = SQLPort mode = ENABLE scope = all profile = CURRENT
// netsh firewall set portopening protocol = UDP port = 1434 name = SQLPort mode = ENABLE scope = all profile = CURRENT
// netsh advfirewall firewall add rule name = SQLPort dir = in protocol = tcp action = allow localport = 1433 remoteip = any profile = PUBLIC
// netsh advfirewall firewall add rule name = SQLPort dir = in protocol = udp action = allow localport = 1434 remoteip = any profile = PUBLIC
// VERY IMPORTANT FOR REMOTE ACCESS: you have to add the rules on port fowarding
// on the router!!!
// TCP: 1433
// UDP: 1434
// or just a personal port like TCP 31433/UDP 31434
// read carefully the netsh commands above
// server name: 123.132.24.177\SQLEXPRESS
// server name: anyurl.myftp.org\SQLEXPRESS,1433 <<-- regular port
// server name: anyurl.myftp.org\SQLEXPRESS
// server name: anyurl.myftp.org\SQLEXPRESS,31433 <<-- WOW different PORT here!!!
SqlConnection myConnection = new SqlConnection(
"user id=sa;" +
"password=password_goes_here!;" +
"server=anyurl.myftp.org\\SQLEXPRESS,31433;" +
//"Trusted_Connection=no;" +
"database=database_name_here; " +
"connection timeout=30");
try
myConnection.Open();
catch (Exception e)
Console.WriteLine(e.ToString());
try
SqlDataReader myReader = null;
SqlCommand myCommand = new SqlCommand("select * from mytable", myConnection);
myReader = myCommand.ExecuteReader();
while (myReader.Read())
Console.WriteLine(myReader["tab01_name"].ToString());
Console.WriteLine(myReader["tab01_age"].ToString());
catch (Exception e)
Console.WriteLine(e.ToString());
try
myConnection.Close();
catch (Exception e)
Console.WriteLine(e.ToString());
Adelino Araujo -
How to delete the Folder from sql server 2008
Hi all,
I was trying to delete the folder from sql server 2008 with the below script
DECLARE @path VARCHAR(256) -- path for backup files
DECLARE @cmd VARCHAR(8000)
DECLARE @folderName VARCHAR(256) -- filename for backup
SET @folderName = + (CONVERT(varchar(10), GETDATE()-7, 112)) -- 7 days back date folder name
SET @path = 'I:\Backup_Test\' + @folderName -- Folder path
SET @cmd = 'del ' + @path -- Delete
EXEC master..xp_cmdshell @cmd
--Print @cmd
This is not working it was asking the Confirmation (I:\Backup_Test\20100629\*, Are you sure (Y/N)? ) what will i do to the delete the folder.
Thanks,
Prasad R.I would notice you that T-SQL does not play well to do things like that. Do not you want using .net language to delete folders?
Old method is
declare @HR int, @CFOLDER varchar(255),@FSO int
set @CFOLDER='D:\folder\'
EXEC @HR = sp_OACreate 'Scripting.FileSystemObject', @FSO OUT
EXEC @HR = sp_OAMethod @FSO, null, 'DeleteFolder', @CFOLDER
Now regarding to your second question please examine xp_fileexist system stored procedure
CREATE FUNCTION dbo.fn_file_exists(@filename VARCHAR(300))
RETURNS INT
AS
BEGIN
DECLARE @file_exists AS INT
EXEC master..xp_fileexist @filename, @file_exists OUTPUT
RETURN @file_exists
END
GO
-- test
SELECT dbo.fn_file_exists('c:\a.txt')
Best Regards, Uri Dimant SQL Server MVP http://dimantdatabasesolutions.blogspot.com/ http://sqlblog.com/blogs/uri_dimant/ -
JDeveloper 11.1.1.2.0 - Panel Dashboard using Data from SQL Server 2008
Hi All,
I am using JDeveloper 11.1.1.2.0 and am trying to create a cross application dashboard. This dashboard would show 2 panel's of data from an Oracle Database (Already completed this) and two panel's of data from a SQL Server 2008 Database.
I have successfully installed a SQL Server 2008 database locally on my machine. I have downloaded the JDBC drivers from the Microsoft website and I have two JAR Files:
* sqljdbc.jar
* sqljdbc4.jar
I have created a SQL Server connection within the JDeveloper connections panel and I can successfully query my database.
I have created a New application module and set its connection to a JDBC connection with the credentials specified within the Connections tab. I then added the two JAR files as libraries to the Model project and
ran the Application Module tester. This succesfully shows some records.
Within the View Project I Created a new page and dropped the View Object on as a table. I then go to Run the page and get an error relating to the JDBC drivier not being found. I have read a few posts about adding it to Weblogic lib files and modifying the start up scripts but can anyone give me a definitive working solution? I also tried changing my Application Module to using a DataSource, but I also have the same problem within the Weblogic console (it cannot create a data source for SQL SERVER as it does not have the drivers).
Any help is greatly appreciated.
ThanksThanks for the responses.
I have edited C:\oracle\Middleware\wlserver_10.3\common\bin\commEnv.cmd to add the entries as follows...
set WEBLOGIC_CLASSPATH=%JAVA_HOME%\lib\tools.jar;%BEA_HOME%\utils\config\10.3\config-launch.jar;%WL_HOME%\server\lib\weblogic_sp.jar;%WL_HOME%\server\lib\weblogic.jar;%FEATURES_DIR%\weblogic.server.modules_10.3.2.0.jar;%WL_HOME%\server\lib\webservices.jar;%ANT_HOME%/lib/ant-all.jar;%ANT_CONTRIB%/lib/ant-contrib.jar;%WL_HOME%\server\lib\sqljdbc.jar;%WL_HOME%\server\lib\sqljdbc4.jar
You can now see the additional entries at the end of the classpath.
The Weblogic home is set as follows set WL_HOME=C:\oracle\Middleware\wlserver_10.3
I have placed the files in C:\oracle\Middleware\wlserver_10.3\server\lib
I restarted the server. Logged into the Weblogic console and tried to create a datasource with the Microsoft Drivers but still no luck. I gave the Oracle Microsoft Driver a go and it seemed to work! I'm guessing that there is a driver bundle in. -
Best way to migrate SharePoint 2003 data into SQL Server 2008
Hi Experts,
I am planning to migrate data from SharePoint 2003 into SQL Server 2008. After the migration SharePoint site will be deleted in couple of months and then that data will be feed into .Net Front end application
1) What is the best and easy way to do it?
2) Is there any way to automate the migration process? i.e. If a new record gets entered into SharePoint it should be populated into SQL Server 2008.
3) Any other suggestions
Thanks,
JohnDear John,
If it's just a few lists, and you just want to import them "as-is" then it should be possible to do so ... and survive to tell the about it ;-)
Generally speaking, You will need to write a small process (program or script) to read/parse each list and check if the item(s) are in the target table (I assuming that there is a distinct table as target
for each list, and that each list has 'something" you can use to distinct each row), if it's not there, the just add them according to your needs.
Then just rerun the process periodically and it would keep your databases up to date (you could even set ti up to update those records that have changes, but that would delay your process significantly)
What i just described is doable, and not TOO complicated, it could be done i a lot different ways, and with different alternatives of programming/scripting languages. for sure you can do it in any flavor
of .net language, and even powershell.
As I mentioned, this is speaking in general, the actual implementation would depend on your specific needs and the kind of data that you have/need to keep.
Best Regards / Saludos, Marianok
Disclaimer: This post, and all included code and information is provided "AS IS" with no warranties or guarantees and confers no rights. Try it at your own risk, I take no responsibilities.
Aclaración: Esta publicación, y todo en código e información en la misma, es provista "AS IS" / "Como Está" sin garantía alguna y no le confiere ningún derecho. Pruebelo su propio riesgo. No asumo responsabilidad alguna.
Maybe you are looking for
-
Please review my backup plan and give me any instruction
Hi every one. I set up a database and plant a backup strategy with RMAN that is: - Backup incremental level 0 on every Sunday - Backup incremental level 1 on other days. My database is Oracle Enterprise 11gR2 - Linux amd64 The backup task scheduled w
-
I switched computers and need to download Acrobat 9 Standard and I can't find it
I switched computers and need to download Acrobat 9 Standard and I can't find it anywhere. Does anyone know how to find it? I have a serial number -- oi just want to download it!
-
How to increase the width of the column in Tableview
Hi ALL, How to increase the width of the column in tableview?I have name column where big name is displaying in rows.Does any one have any idea how to increase the width of the column dynamically in tableview.Please respond its little urgent. Thanks
-
In Office 2013, the only Office Theme choices are two grays and a white (3 total). When will additional options be available? Also, the Office Background only includes designs which appear to have been garnered from a second grade class' drawing con
-
Cannot find Orcale bpel designer for eclipse
Hi, I downloaded Oracle BPEL Process Manager, and eclipse 3.2, but I am unable to find the oracle bpel designer for eclipse to download. I have the tutorial, but I cannot find the designer at the link provided in tutorial. Regards, Prakash