How to store multiple counts based on creation date
Hi,
I want to retrieve the count of number of risk for each date and render it on line graph. I am retrieving data from sharepoint list where the number of risk counts increase with its creation and decreases after it is closure which maintained in another
column. Like if a risk is created on 02/02/2015 and closes on 03/03/2015 and an another risk is created on 17/02/2015 and closes on 14/03/2015. Then the count of the risk from 02/02/2015 to 16/02/2015 is 1 and from 17/02/2015 to 03/03/2015 is 2 and
then again till 14/03/2015 is 1. I want to retrieve the count based on the dates rendered dynamically on X-axis that is from current date back to past 24 days. I tried to create two datasets with one storing the risks after being queried based on creation
date and closure date and retrieving the count from Graph Y values but it is returning me count 0.
Please help.
Thanks in advance.
Hi,
I want to retrieve the count of number of risk for each date and render it on line graph. I am retrieving data from sharepoint list where the number of risk counts increase with its creation and decreases after it is closure which maintained in another
column. Like if a risk is created on 02/02/2015 and closes on 03/03/2015 and an another risk is created on 17/02/2015 and closes on 14/03/2015. Then the count of the risk from 02/02/2015 to 16/02/2015 is 1 and from 17/02/2015 to 03/03/2015 is 2 and
then again till 14/03/2015 is 1. I want to retrieve the count based on the dates rendered dynamically on X-axis that is from current date back to past 24 days. I tried to create two datasets with one storing the risks after being queried based on creation
date and closure date and retrieving the count from Graph Y values but it is returning me count 0.
Please help.
Thanks in advance.
Similar Messages
-
How to List Sales Orders based on Creation Date and Delivery Priority
Dear all,
How can we list Sales Orders based on creation date and delivery priority.
I tried using vl10a transaction code, but there we can see sales order based on delivery date.
we need to list all sales order based on delivery priority and sales order creation date.
can any one of you tell me which standard report gives such kind of report. Your suggestions will be highly appreciated.
Thank you
Raghu RamHi Raghu,
There is no st report available as per your req.
Using SQVI, you develope one report that is list of sales orders based on your req.
SQVI is used to convert a Quick View into a query.
Quick Viewer:
The Quick Viewer allows you to define reports without having to program yourself. The Quick
Viewer is especially useful for new users and occasional use.
Quick Viewer is a tool for generating reports. SAP Query offers the user a whole range of options for defining reports. SAP Query also supports different kinds of reports such as basic lists, statistics, and ranked lists. Quick Viewer, on the other hand, is a tool that allows even relatively inexperienced users to create basic lists.
Quick View definitions are user-dependent. You can transfer a Quick View into SAP Query in order to make reports, for example, accessible to additional users, or to use the other functions available in SAP Query.
The following is a comparison of Quick Views and queries:
Quick Views possess the same functional attributes as queries. However, only basic lists may be defined with Quick Views.
In contrast to queries, no user group assignment is necessary with Quick Views. Each user has his/her own personal list of Quick Views. Quick Views cannot be exchanged between users. Quick Views may, however, be converted to queries and then be made available to other users in a specific user group.
Info Sets are not required for Quick View definition. Whenever you define a Quick View, you can specify its data source explicitly. Tables, database views, table joins, logical databases, and even Info Sets, can all serve as data sources for a Quick View. You can only use additional tables and additional fields if you use an Info Set as a data source.
The Quick Viewer uses various controls. Certain hardware and software requirements must also be fulfilled before you can use the Quick Viewer.
To define a Quick View, you select certain fields according to your data source that determine the structure of your report. The report can be executed in basis mode with standard layout or may be edited using drag and drop and the other toolbox functions available in WYSIWYG mode.
Reports created using the Quick Viewer may also be passed to external programs (Excel, for example).
Call the Quick Viewer using System -> Services -> Quick Viewer (or transaction SQVI).
Enter the name of the Quick View. Quick View names can contain a maximum of 14 characters.
Choose Create.
Enter a title for the Quick View and remarks, if you think they are relevant.
If you do not want to base your list on a table, use the possible entries pushbutton in the Data source field to select another data source. You can choose logical databases or Info Sets. In addition, you may also create table joins. For further information, see Selecting a Data Source.
Choose Basis mode if you want to create the list directly with no list design. Choose Layout mode if you want to define the layout of your list yourself.
SQVI Table Quick viewer Used to created quick client dependent reports
Probably the easiest and most flexible way to do this is thru one of the ABAP query transactions.
Transaction SQVI can do this and it has a very good help function that explains how it works... the drawback is that it is only for one user.
You can play around with it and see if it meets your needs...
The query results will come back in an ALV Grid or Excel... you can select what fields are returned, and have a selection screen to enter the search criteria.
You can get the report by joining the tables VBAK and VBAP.
If you have any queries, i will forward screen shots to your id.
Reward points pls.
Regards,
Govind. -
How to store multiple files from SAp in to Application server?
Hi Guys,
Can anybody tell me how to store multiple files from SAP into Application server.in my application i have to get the data from SAP tables BSEG , BKPF , BSAK and BSIK that to daily i have to do.
Any Logic or Code for how to do is welcomed.
plz help me urgently.
Thanks,
GopiHi,
directories creates basis. If you have task to store data in application server you already should have information into which folder you have to do it. If you don't have this information because it is just for example training for next task then you can use your personal folder into which you have access. To get list of all available folders please look at attached code and form get_directories (you get the list of folders you see in transaction AL11). But don't forget: If you are using open dataset you have to have rights to access application folder!
Here you are code which I use to upload text files from local disc into application folder
Regards,
Karol
*& Report FILE_PC_TO_SAP
REPORT FILE_PC_TO_SAP.
DATA: BEGIN OF searchpoints OCCURS 100,
DIRNAME(200) TYPE c, " name of directory.
sp_name(100) TYPE c," name of entry. (may end with *)
END OF searchpoints.
DATA: BEGIN OF isearchpoints OCCURS 10,
dirname(75) TYPE c, " name of directory.
aliass(75) TYPE c, " alias for directory.
svrname(75) TYPE c, " svr where directory is availabl
sp_name(75) TYPE c, " name of entry. (may end with *)
sp_cs(10) TYPE c, " ContainsString pattern for name
END OF isearchpoints.
data: l_file type filetable.
data: l_rc type i.
data: itab type TABLE OF string.
data: g_tmp_file_path type rlgrap-filename.
data: wa_itab type string.
data: h_destin(100) type c.
data: dat type string.
INITIALIZATION.
perform get_directories.
START-OF-SELECTION.
parameters: in_file type string OBLIGATORY LOWER CASE.
parameters: destin(100) type c OBLIGATORY LOWER CASE.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
FILENAME = in_file
"FILETYPE = 'BIN'
FILETYPE = 'ASC'
HAS_FIELD_SEPARATOR = ' '
HEADER_LENGTH = 0
READ_BY_LINE = 'X'
DAT_MODE = ' '
TABLES
DATA_TAB = itab
EXCEPTIONS
FILE_OPEN_ERROR = 1
FILE_READ_ERROR = 2
NO_BATCH = 3
GUI_REFUSE_FILETRANSFER = 4
INVALID_TYPE = 5
NO_AUTHORITY = 6
UNKNOWN_ERROR = 7
BAD_DATA_FORMAT = 8
HEADER_NOT_ALLOWED = 9
SEPARATOR_NOT_ALLOWED = 10
HEADER_TOO_LONG = 11
UNKNOWN_DP_ERROR = 12
ACCESS_DENIED = 13
DP_OUT_OF_MEMORY = 14
DISK_FULL = 15
DP_TIMEOUT = 16
OTHERS = 17.
IF sy-SUBRC <> 0.
write: / 'Error during loading input file!'.
ENDIF.
if h_destin is INITIAL.
h_destin = in_file.
endif.
CONCATENATE destin h_destin into dat SEPARATED BY '/'.
*TRANSLATE dat TO UPPER CASE.
OPEN DATASET dat FOR OUTPUT IN TEXT MODE ENCODING DEFAULT.
IF sy-SUBRC = 0.
loop at itab into wa_itab.
TRANSFER: wa_itab TO dat.
endloop.
CLOSE DATASET dat.
write: / 'File uploaded!'.
ELSE.
write: / 'Not possible to open dataset'.
ENDIF.
at selection-screen on value-request for in_file.
perform select_input_file_name.
loop at l_file into g_tmp_file_path.
move g_tmp_file_path to in_file.
h_destin = ''.
SPLIT g_tmp_file_path at '\' into table itab.
loop at itab into g_tmp_file_path.
h_destin = g_tmp_file_path.
endloop.
endloop.
at selection-screen on value-request for destin.
DATA: lt_dfies TYPE TABLE OF dfies.
DATA: lwa_dfies TYPE dfies.
CALL FUNCTION 'DDIF_FIELDINFO_GET'
EXPORTING
tabname = '/BI0/PCO_AREA'
lfieldname = 'CO_AREA'
IMPORTING
dfies_wa = lwa_dfies.
lwa_dfies-tabname = 'searchpoints'.
lwa_dfies-REPTEXT = 'Destination directory'.
lwa_dfies-LENG = 100.
lwa_dfies-INTLEN = 100.
lwa_dfies-OUTPUTLEN = 100.
lwa_dfies-fieldname = 'SP_NAME'.
APPEND lwa_dfies TO lt_dfies.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
RETFIELD = 'SP_NAME'
DYNPPROG = SY-REPID
DYNPNR = SY-DYNNR
DYNPROFIELD = 'destin'
VALUE_ORG = 'S'
TABLES
VALUE_TAB = searchpoints
FIELD_TAB = lt_dfies
EXCEPTIONS
PARAMETER_ERROR = 1
NO_VALUES_FOUND = 2
OTHERS = 3.
*& Form select_input_file_name
* text
form select_input_file_name.
* call function 'F4_FILENAME'
* exporting
* program_name = sy-repid
* dynpro_number = sy-dynnr
* field_name = 'PATH'
* importing
* file_name = g_tmp_file_path.
CALL METHOD CL_GUI_FRONTEND_SERVICES=>FILE_OPEN_DIALOG
EXPORTING
WINDOW_TITLE = 'Please choose a file'
"default_extension = '*.TXT'
"default_filename = 'C:\*.txt'
initial_directory = 'C:\'
file_filter = '*.*'
CHANGING
FILE_TABLE = l_file
RC = l_RC
EXCEPTIONS
FILE_OPEN_DIALOG_FAILED = 1
CNTL_ERROR = 2
ERROR_NO_GUI = 3
NOT_SUPPORTED_BY_GUI = 4
OTHERS = 5.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
endform. "select_input_file_name
*& Form WRITE_DB_HOME
* Write DB home directory
* no parameters
FORM write_db_home.
CASE sy-dbsys(3).
WHEN 'ORA'.
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_ORAHOME'
ID 'VALUE' FIELD searchpoints-dirname.
*--- C5056155 Start of ALV -------------------------------*
* PERFORM flip_flop(rsora000) USING cflag.
* WRITE: / 'DIR_ORAHOME', 30 searchpoints-dirname.
MOVE: 'DIR_ORAHOME' TO searchpoints-sp_name.
APPEND searchpoints.
*--- C5056155 End of ALV -------------------------------*
WHEN 'ADA'.
CALL 'C_GETENV' ID 'NAME' FIELD 'DBROOT'
ID 'VALUE' FIELD searchpoints-dirname.
*--- C5056155 Start of ALV -------------------------------*
* PERFORM flip_flop(rsora000) USING cflag.
* WRITE: / 'DIR_ADA_DBROOT', 30 searchpoints-dirname.
MOVE: 'DIR_ADA_DBROOT' TO searchpoints-sp_name.
APPEND searchpoints.
*--- C5056155 End of ALV -------------------------------*
WHEN 'INF'.
CALL 'C_GETENV' ID 'NAME' FIELD 'INFORMIXDIR'
ID 'VALUE' FIELD searchpoints-dirname.
*--- C5056155 Start of ALV -------------------------------*
* PERFORM flip_flop(rsora000) USING cflag.
* WRITE: / 'DIR_INF_INFORMIXDIR', 30 searchpoints-dirname.
MOVE: 'DIR_INF_INFORMIXDIR' TO searchpoints-sp_name.
APPEND searchpoints..
*--- C5056155 End of ALV -------------------------------*
WHEN 'DB6'.
CALL 'C_GETENV' ID 'NAME' FIELD 'INSTHOME'
ID 'VALUE' FIELD searchpoints-dirname.
IF sy-subrc = 0.
*--- C5056155 Start of ALV -------------------------------*
* PERFORM flip_flop(rsora000) USING cflag.
* WRITE: / 'DIR_DB2_HOME', 30 searchpoints-dirname.
MOVE: 'DIR_DB2_HOME' TO searchpoints-sp_name.
APPEND searchpoints.
*--- C5056155 End of ALV -------------------------------*
ELSE.
EXIT.
ENDIF.
WHEN OTHERS.
EXIT.
ENDCASE.
ENDFORM. " WRITE_DB_HOME
FORM get_directories.
* get the name and aliases of ALL userdefined directories
SELECT * FROM user_dir INTO isearchpoints
WHERE svrname = sy-uname.
MOVE isearchpoints-dirname to searchpoints-dirname.
MOVE isearchpoints-aliass to searchpoints-sp_name.
APPEND searchpoints.
ENDSELECT.
SELECT * FROM user_dir INTO isearchpoints
WHERE svrname = 'all'.
MOVE isearchpoints-dirname to searchpoints-dirname.
MOVE isearchpoints-aliass to searchpoints-sp_name.
APPEND searchpoints.
ENDSELECT.
* Get DB home
IF sy-dbsys(3) = 'ADA'.
PERFORM write_db_home.
ENDIF.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_ATRA'
ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_ATRA' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_BINARY'
ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_BINARY' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory $DIR_CCMS
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_CCMS'
ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_CCMS' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_CT_LOGGING'
ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_CT_LOGGING' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_CT_RUN'
ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_CT_RUN' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_DATA'
ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_DATA' TO searchpoints-sp_name.
APPEND searchpoints.
* Get DB home
IF sy-dbsys(3) = 'DB6'.
PERFORM write_db_home.
ENDIF.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_DBMS'
ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_DBMS' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_EXECUTABLE'
ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_EXECUTABLE' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_EXE_ROOT'
ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_EXE_ROOT' TO searchpoints-sp_name.
APPEND searchpoints.
*get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_GEN'
ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_GEN' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_GEN_ROOT'
ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_GEN_ROOT' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_GLOBAL'
ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_GLOBAL' TO searchpoints-sp_name.
APPEND searchpoints.
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_GRAPH_EXE'
ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_GRAPH_EXE' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_GRAPH_LIB'
ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_GRAPH_LIB' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_HOME'
ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_HOME' TO searchpoints-sp_name.
APPEND searchpoints.
* Get DB home
IF sy-dbsys(3) = 'INF'.
PERFORM write_db_home.
ENDIF.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_INSTALL'
ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_INSTALL' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_INSTANCE'
ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_INSTANCE' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_LIBRARY'
ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_LIBRARY' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_LOGGING'
ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_LOGGING' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the files written by the memory inspector
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_MEMORY_INSPECTOR'
ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_MEMORY_INSPECTOR' TO searchpoints-sp_name.
APPEND searchpoints.
* Get DB home
IF sy-dbsys(3) = 'ORA'.
PERFORM write_db_home.
ENDIF.
*get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_PAGING'
ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_PAGING' TO searchpoints-sp_name.
APPEND searchpoints.
*get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_PUT'
ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_PUT' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_PERF'
ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_PERF' TO searchpoints-sp_name.
APPEND searchpoints.
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_PROFILE'
ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_PROFILE' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_PROTOKOLLS'
ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_PROTOKOLLS' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_REORG'
ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_REORG' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_ROLL'
ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_ROLL' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_RSYN'
ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_RSYN' TO searchpoints-sp_name.
APPEND searchpoints.
* calculate directory for saphostagent (no sapparam available...)
IF ( sy-opsys(3) = 'WIN' ) OR ( sy-opsys(3) = 'Win' ).
DATA: windir_path(64), programfiles_path(64).
* hoping that ProgramFiles is set in service user environment
CALL 'C_GETENV' ID 'NAME' FIELD 'ProgramFiles'
ID 'VALUE' FIELD programfiles_path.
IF programfiles_path IS INITIAL.
* %ProgramFiles% not available. guess from windir
CALL 'C_GETENV' ID 'NAME' FIELD 'windir'
ID 'VALUE' FIELD windir_path.
* e.g. S:\WINDOWS ==> S:\Program Files
CONCATENATE windir_path(3) 'Program Files' INTO programfiles_path.
ENDIF.
CONCATENATE programfiles_path '\SAP\hostctrl'
INTO searchpoints-dirname.
ELSE.
* on UNIX, the path is hard coded
searchpoints-dirname = '/usr/sap/hostctrl'.
ENDIF.
MOVE: 'DIR_SAPHOSTAGENT' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_SAPUSERS'
ID 'VALUE' FIELD searchpoints-dirname.
IF searchpoints-dirname = '.'.
IF sy-opsys = 'Windows NT'.
searchpoints-dirname = '.\'.
ELSE.
searchpoints-dirname = './'.
ENDIF.
ENDIF.
MOVE: 'DIR_SAPUSERS' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_SETUPS'
ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_SETUPS' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_SORTTMP'
ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_SORTTMP' TO searchpoints-sp_name.
APPEND searchpoints.
*get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_SOURCE'
ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_SOURCE' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_TEMP'
ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_TEMP' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_TRANS'
ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_TRANS' TO searchpoints-sp_name.
APPEND searchpoints.
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_TRFILES'
ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_TRFILES' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_TRSUB'
ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_TRSUB' TO searchpoints-sp_name.
APPEND searchpoints.
* get the name of the current server.
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'rdisp/myname'
ID 'VALUE' FIELD searchpoints-dirname.
data: h_ind type i.
LOOP AT searchpoints.
h_ind = sy-tabix.
IF searchpoints-sp_name IS INITIAL.
DELETE searchpoints INDEX h_ind.
ENDIF.
ENDLOOP.
ENDFORM. -
How to store multiple data in one aray at one go?
Hi i am creating a Recipe Cooking Book and i have got a recipe class, ingredient class, equipment class and jFORM GUI. the gui form will have a list and it will contain couple of equipments. the user should be able to select more than 1 equipments which would use the pass- by - value to the recipe class and it will be passed to equipment class.
The problem that encounter is that when i have to select multiple values from list, it should store all selected equipments to array.
This is where i am stuck as i don't know how to store couple of equipment at one creation.
This is my recipe constructor in recipe class
public Recipe(int aRecipeID, String aRecipeName, String aCountryofOrigin,
String aType, String aPreparationTime, String aCookingTime,
String aRecipeDescription, String aProcedure,
ClsEquipment[] aequipment, String aImage1, String aImage2,
String aImage3) {
Create(aRecipeID, aRecipeName, aCountryofOrigin, aType,
aPreparationTime, aCookingTime, aRecipeDescription, aProcedure,
aequipment, aImage1, aImage2, aImage3);
public void Create(int aRecipeID, String aRecipeName,
String aCountryofOrigin, String aType,
String aPreparationTime, String aCookingTime,
String aRecipeDescription, String aProcedure,
ClsEquipment[] aequipment, String aImage1, String aImage2,
String aImage3) {
RecipeID = aRecipeID;
RecipeName = aRecipeName;
CountryofOrigin = aCountryofOrigin;
Type = aType;
PreparationTime = aPreparationTime;
CookingTime = aCookingTime;
RecipeDescription = aRecipeDescription;
Procedure = aProcedure;
*equipment[j] = aequipment[k];*
Image1 = aImage1;
Image2 = aImage2;
Image3 = aImage3;
this is The command that i have in Jform gui
public void jRcreateButton_actionPerformed(ActionEvent e) {
int i=0;
myRecipe.Create(Integer.parseInt(jRidTextField.getText()),jRnameTextField.getText(),jRcountryTextField.getText(),jRtypeTextField.getText(),jRptimeTextField.getText(),jRctimeTextField.getText(),jRdescriptionTextArea.getText(), jRprocedureTextArea.getText(),new ClsEquipment(jAEequipmentList.getSelectedValues()),jRimage1TextField.getText(),jRimage2TextField.getText(),jRimage3TextField.getText());
Let me conclude what i am trying to do. Basically i want the user to select more than 1 equipments from the List and the user should also input other recipe data. once this is done, the should click on create.
when creating one recipe, u need more than 1 equipment so that created recipe should store selected equipments, which i will later on retrieve and display on screen.
can u please guide me where i am goin wrong and how i could fix it.
thank you in advance
Edited by: JAVABABY on Feb 18, 2008 8:40 AM*equipment[j] = aequipment[k];*JList's getSelectedValues() method returns an array of Objects, so if you wanted to store it into another Object[] reference, you'd just use
equipment = aequipment;But, you are storing it as an Equipment array, so you'll need to loop over the Object array and cast each element to an Equipment reference, and store it into the Equipment array. Something like this:
equipment = new Equipment[aequipment.length];
for (each element x in aequipment) {
equipment[x] = (Equipment)aequipment[x];
} -
How to store Multiple Attachments in Workflow.
Hello All,
I am doing an scenario, in that i need to store multiple attachments in the workflow container.
Kindly help me, how to store and also, how to retrieve those attachments form worklfow.
I am using custom workflow.
Thanks in advance......
Best Regards,
Chandran SHi Jubish/Venkat
1. I iterated this fucntion moudule to store the multiple attachments to the workflow
SAP_WAPI_ATTACHMENT_ADD
2. Call this FM to get the attachemnts form the workflow (pass workitem Item id which is used for storing the attchments). SAP_WAPI_GET_ATTACHMENTS
from above you will get objkey for each attachment as output in table.
3. Pass the objkey to this FM to get the contents
SO_DOCUMENT_READ_API1'. this will retrun the content of the attachment either in object_content, contents_hex.
4. Pass the Obtained content to SCMS_BINARY_TO_XSTRING to get the disired format.
Best Regards,
Chandran S -
How to store Multiple values with restriction in Oracle 9i
Hi,
I am using oracle 9i R2 and i would like to know that how can i store multiple values and restrict some of values into oracle table?
ex.
I need to create table or inserting into existing table like below:
ID will be Primary/Unique key and each ID has multiple dept but each ID to have only 1 “X” dept, only 1 “Y” dept and only 1 “Z” dept… but, can have multiple “W” dept
What will be the best option to create/store data like this?
Like Table level Constraint (Unique or Check), Triggers or pl/sql?
ID DEPT
1 X
1 Y
1 Z
1 W
2 X
2 Y
2 Z
2 W
2 W
2 WHi,
Other solution:
Function:
CREATE OR REPLACE FUNCTION my_unique_function(p_dep IN VARCHAR2) RETURN VARCHAR2
DETERMINISTIC AS
BEGIN
IF (p_dep = 'X' OR p_dep = 'Y' OR p_dep = 'Z') THEN
RETURN p_dep;
ELSE
RETURN NULL;
END IF;
END;
/Test:
Connected to Oracle Database 10g Express Edition Release 10.2.0.1.0
Connected as hr
SQL> create table emp(id number, dept varchar2(30));
Table created
SQL>
Function created
SQL> CREATE unique index ix_emp on emp(my_unique_function(dept));
Index created
SQL> insert into emp(id,dept) values (1, 'X');
1 row inserted
SQL> insert into emp(id,dept) values (2, 'X');
insert into emp(id,dept) values (2, 'X')
ORA-00001: unique constraint (HR.IX_EMP) violated
SQL> insert into emp(id,dept) values (3, 'Y');
1 row inserted
SQL> insert into emp(id,dept) values (4, 'Y');
insert into emp(id,dept) values (4, 'Y')
ORA-00001: unique constraint (HR.IX_EMP) violated
SQL> insert into emp(id,dept) values (5, 'Z');
1 row inserted
SQL> insert into emp(id,dept) values (6, 'Z');
insert into emp(id,dept) values (6, 'Z')
ORA-00001: unique constraint (HR.IX_EMP) violated
SQL> insert into emp(id,dept) values (7, 'W');
1 row inserted
SQL> insert into emp(id,dept) values (8, 'W');
1 row inserted
SQL> Regards, -
How to return multiple tags (based on different checks) in a for loop?
Hi,
I'm trying to return multiple elements, based on different checks that are done in the XQuery, within a for loop. But I'm getting syntax errors at any attempt to do this.
This is the structure of what I'm trying to do:
<ActionList>
<ACtion>
let $total := count(...)
for $x in (1 to $total)
let $lineItems := $someVariable/*:Items/*:Item[$x]
return
if(...)
<Qty1>{...}</Qty1>
else ""
if(...)
<Qty2>{...}</Qty2>
else ""
{ if(...)
<Qty3>{...}</Qty3>
else ""
<LinesList>
let $totalcount(...)
for $y in (1 to $totalcount(...)
let $DTL := $someVariable*:DTL[$y]
return
<Line>
<Carrier>{...}</Carrier>
<Path>{...}</Path>
<CA>{
if(...)
data($$someVariable/*:CA)
else
}</CA>
<RE>{
if(...)
data($someVariable*:CA[@XX="RG"])
else
}</RE>
<Time>{
if(...)
data($someVariable*:CA[@XX="BN"])
else
</Time>
</Line>
</LinesList>
</ACtion>
</ActionList>
I'm not able to return elements without having their father being returned as well, I just want to iterate over those fields and, based on that verification, decide whether they should be returned or not.
Can someone please advise?An example anyway...
Input document ($d) :
<ns0:Items xmlns:ns0="http://my.company.org/my-namespace">
<ns0:Item type="A">
<ns0:Qty>2</ns0:Qty>
<ns0:UnitPrice>10.00</ns0:UnitPrice>
<ns0:DTL>
<ns0:Article>ART001</ns0:Article>
<ns0:DispatchDate>2012-01-20</ns0:DispatchDate>
<ns0:Destination direct="1">Location1</ns0:Destination>
</ns0:DTL>
<ns0:DTL>
<ns0:Article>ART002</ns0:Article>
<ns0:DispatchDate>2012-01-21</ns0:DispatchDate>
<ns0:Destination direct="1">Location2</ns0:Destination>
</ns0:DTL>
</ns0:Item>
<ns0:Item type="B">
<ns0:Mass>5</ns0:Mass>
<ns0:Unit>kg</ns0:Unit>
<ns0:DTL>
<ns0:Article>ART003</ns0:Article>
<ns0:DispatchDate>2012-01-20</ns0:DispatchDate>
<ns0:Destination direct="1">Location3</ns0:Destination>
</ns0:DTL>
<ns0:DTL>
<ns0:Article>ART004</ns0:Article>
<ns0:DispatchDate>2012-01-21</ns0:DispatchDate>
<ns0:Destination direct="1">Location4</ns0:Destination>
</ns0:DTL>
<ns0:DTL>
<ns0:Article>ART005</ns0:Article>
<ns0:DispatchDate>2012-01-22</ns0:DispatchDate>
<ns0:Destination direct="2">Location5</ns0:Destination>
</ns0:DTL>
</ns0:Item>
</ns0:Items>XQuery :
declare namespace ns0 = "http://my.company.org/my-namespace";
<DispatchInfo>
for $i in $d/ns0:Items/ns0:Item
return
<Parcel>
if ($i/@type = "A")
then <Amount>{xs:decimal($i/ns0:Qty * $i/ns0:UnitPrice)}</Amount>
else <Weight>{concat($i/ns0:Mass, " ", $i/ns0:Unit)}</Weight>
, for $j in $i/ns0:DTL
return
<Article>
<Num>{data($j/ns0:Article)}</Num>
, <Dt>{data($j/ns0:DispatchDate)}</Dt>
, if ($j/ns0:Destination/@direct = "1")
then <Dest>{data($j/ns0:Destination)}</Dest>
else ()
</Article>
</Parcel>
</DispatchInfo>Output :
<DispatchInfo>
<Parcel>
<Amount>20</Amount>
<Article>
<Num>ART001</Num>
<Dt>2012-01-20</Dt>
<Dest>Location1</Dest>
</Article>
<Article>
<Num>ART002</Num>
<Dt>2012-01-21</Dt>
<Dest>Location2</Dest>
</Article>
</Parcel>
<Parcel>
<Weight>5 kg</Weight>
<Article>
<Num>ART003</Num>
<Dt>2012-01-20</Dt>
<Dest>Location3</Dest>
</Article>
<Article>
<Num>ART004</Num>
<Dt>2012-01-21</Dt>
<Dest>Location4</Dest>
</Article>
<Article>
<Num>ART005</Num>
<Dt>2012-01-22</Dt>
</Article>
</Parcel>
</DispatchInfo> -
How to store Multiple Ec\xcels into Table Using sql loder
Plese guide me to store Multiple Ec\xcels into Table Using sql loder
I am not clear with your question. Do you want to load multipel Excel Files into a table. If so you can follow this link.
http://www.orafaq.com/wiki/SQL*Loader_FAQ#Can_one_load_data_from_multiple_files.2F_into_multiple_tables_at_once.3F
Thanks,
Karthick. -
How to store multiple values associated to one key
hello all
In my program I need to store "multiple values associated to one key".
for example : key would be ="T"
Values are = 2,4,5,1,2Plz tell me which data structure I can use for this purpose.
I have tried Hashtable for it, unfortunately it does not support duplicate keys in one Hashtable.
Thanx.
RakeshThe easiest thing to do, is store another data structure as your value for a
particular key. So "T" being your your key, you would associate the value
to be an int[] (if you know the number of sub values) or create a new Vector
for each key, then you don't have to worry about the number of values at
compile time. All the while still using the Hashtable for constant time
look up. So like this:
public void storeMultValues(int[] arr)
Vector v = new Vector();
v.add(new Integer(1));
v.add(new Integer(2));
v.add(new Integer(3));
this.hashtable.put("T", v);
}See if you can work with that.
-Cludge -
How to create a filter based on Effective date EFFDT
Hello to all,
I am currently creating reports from an HR database that stores records by employee (EMPLID) based on effective date(EFFDT) and Effective Sequence (EFFSEQ).
It is easy to get a report that shows all entries up to a certain data (using <= or >=), however, I am not able to create a Filter (in the report or in the prompt)
that shows me the MAX(EFFDT) up to a certain data dd/mm/yyyy. (any one)
The sql script we use is the follwiing
SELECT A.EFFDT, A.EFFSEQ, A.ACTION, A.EMPL_CLASS, *
FROM PS_JOB A
WHERE A.EMPLID=' ' ----*(PROMPT1)*
AND A.EFFDT=(SELECT MAX(B.EFFDT) FROM PS_JOB B
WHERE B.EMPLID=A.EMPLID
AND B.EFFDT<=' ') *(PROMPT2)*
AND A.EFFSEQ=(SELECT MAX(B.EFFSEQ) FROM PS_JOB B
WHERE B.EMPLID=A.EMPLID
AND B.EFFDT=A.EFFDT)
Do I need to create a variable? If yes, How?
Please send me your suggestions or past experiences with BI on the subject.
Thanks
RobertoHi Roberto,
I would create a session variable via the Oracle BI Administration Tool.
See the following of how to achieve this:
http://download.oracle.com/docs/cd/E12096_01/books/admintool/admintool_Variables4.html
Reference this variable in your filter. It looks something like this VALUEOF(NQ_SESSION."VARIABLE_NAME")
Good Luck,
Daan Bakboord -
How to use multiple selection parameters in the data model
Hi, after have looked all the previous threads about how to use multiple selection parameters , I still have a problem;
I'm using Oracle BI Publisher 10.1.3.3.2 and I'm tried to define more than one multiple selection parameters inside the data template;
Inside a simple SQL queries they work perfectly....but inside the data template I have errors.
My data template is the following (it's very simple...I am just testing how the parameters work):
<dataTemplate name="Test" defaultPackage="bip_departments_2_parameters">
<parameters>
<parameter name="p_dep_2_param" include_in_output="false" datatype="character"/>
<parameter name="p_loc_1_param" include_in_output="false" datatype="character"/>
</parameters>
<dataTrigger name="beforeReport" source="bip_departments_2_parameters.beforeReportTrigger"/>
<dataQuery>
<sqlStatement name="Q2">
<![CDATA[
select deptno, dname,loc
from dept
&p_where_clause
]]>
</sqlStatement>
</dataQuery>
<dataStructure>
<group name="G_DEPT" source="Q2">
<element name="deptno" value="deptno"/>
<element name="dname" value="dname"/>
<element name="loc" value="loc"/>
</group>
</dataStructure>
</dataTemplate>
The 2 parameters are based on these LOV:
1) select distinct dname from dept (p_dep_2_param)
2) select distinct loc from dept (p_loc_1_param)
and both of them have checked the "Multiple selection" and "Can select all" boxes
The package I created, in order to use the lexical refence is:
CREATE OR REPLACE package SCOTT.bip_departments_2_parameters
as
p_dep_2_param varchar2(14);
p_loc_1_param varchar2(20);
p_where_clause varchar2(100);
function beforereporttrigger
return boolean;
end bip_departments_2_parameters;
CREATE OR REPLACE package body SCOTT.bip_departments_2_parameters
as
function beforereporttrigger
return boolean
is
l_return boolean := true;
begin
if (p_dep_2_param is not null) --and (p_loc_1_param is not null)
then
p_where_clause := 'where (dname in (' || replace (p_dep_1_param, '''') || ') and loc in (' || replace (p_loc_1_param, '''') || '))';
else
p_where_clause := 'where 1=1';
end if;
return (l_return);
end beforereporttrigger;
end bip_departments_2_parameters;
As you see, I tried to have only one p_where_clause (with more than one parameter inside)....but it doesn't work...
Using only the first parameter (based on deptno (which is number), the p_where_clause is: p_where_clause := 'where (deptno in (' || replace (p_dep_2_param, '''') || '))';
it works perfectly....
Now I don't know if the problem is the datatype, but I noticed that with a single parameter (deptno is number), the lexical refence (inside the data template) works.....with a varchar parameter it doesn't work....
So my questions are these:
1) how can I define the p_where_clause (inside the package) with a single varchar parameter (for example, the department location name)
2) how can I define the p_where_clause using more than one parameter (for example, the department location name and the department name) not number.
Thanks in advance for any suggestion
AlexAlex,
the missing thing in your example is the fact, that if only one value is selected, the parameter has exact this value like BOSTON. If you choose more than one value, the parameter includes the *'*, so that it looks like *'BOSTON','NEW YORK'*. So you need to check in the package, if there's a *,* in the parameter or not. If yes there's more than one value, if not it's only one value or it's null.
So change your package to (you need to expand your variables)
create or replace package bip_departments_2_parameters
as
p_dep_2_param varchar2(1000);
p_loc_1_param varchar2(1000);
p_where_clause varchar2(1000);
function beforereporttrigger
return boolean;
end bip_departments_2_parameters;
create or replace package body bip_departments_2_parameters
as
function beforereporttrigger
return boolean
is
l_return boolean := true;
begin
p_where_clause := ' ';
if p_dep_2_param is not null then
if instr(p_dep_2_param,',')>0 then
p_where_clause := 'WHERE DNAME in ('||p_dep_2_param||')';
else
p_where_clause := 'WHERE DNAME = '''||p_dep_2_param||'''';
end if;
if p_loc_1_param is not null then
if instr(p_loc_1_param,',')>0 then
p_where_clause := p_where_clause || ' AND LOC IN ('||p_loc_1_param||')';
else
p_where_clause := p_where_clause || ' AND LOC = '''||p_loc_1_param||'''';
end if;
end if;
else
if p_loc_1_param is not null then
if instr(p_loc_1_param,',')>0 then
p_where_clause := p_where_clause || 'WHERE LOC in ('||p_loc_1_param||')';
else
p_where_clause := p_where_clause || 'WHERE LOC = '''||p_loc_1_param||'''';
end if;
end if;
end if;
return (l_return);
end beforereporttrigger;
end bip_departments_2_parameters;
I've written a similar example at http://www.oracle.com/global/de/community/bip/tipps/Dynamische_Queries/index.html ... but it's in german.
Regards
Rainer -
How to update the price based upon PGI date
Hi
I have issue of updation of the Prices and freight based on PGI date in the billing we are using the two billing types for the excsies and tax invoice creation .And in the copy control pricing type is maintained Aas "C" for the billing types with single delivery but someHow MRP in the excise billing has been picked from the condition record thats validity is ended and in Tax invoice it picks up the correct prices
Both pricing condition types has pricing type "B" from Billing date and in the freight we have maintained as "A" SRD
But for the some cases specially for the excise related part that is based upon the MRP we are facing this issue
Pricing date is some how coming from sales document
Please find the problem details in the attachmentHi,
if you see two condition tabs snap shots you can understand clearly because that two invoices has been created in two different dates and you have maintained the pricing date C-billing date ( KOMK-FKDAT).Due to this,the price of ZMRP is coming differently.After you creation of first invoice then you would have changed ZMRP amount.Now while you are creating second invoice ,system has taken new price of ZMRP in billing level.
Note:While creating second invoice, PGI date might have come into billing level but someone would be changed billing date manually at header level of billing document.Please check that one also.
Kindly let me know if you need further help on this.
Thanks,
Naren -
ABAP to select all AL11 files based on creation date
Hi,
I want to create an ABAP that can select all the files in all the subdirectory folders for a given SAP Directory. The files I want to retrieve will be based on the creation date, i.e. when the file was written to the server, it must be greater than 1 hour and less than 3 hours. The problem I have is, I don't know of any table that stores this type of information. Can any one hepl?
Thanks, DHi,
here's a sample-prg.:
REPORT zzzz66 .
TABLES epsf.
PARAMETERS dir LIKE epsf-epsdirnam DEFAULT '/home/user1/'.
PARAMETERS file LIKE epsf-epsfilnam DEFAULT 'file001.dat'.
DATA mtime TYPE p DECIMALS 0.
DATA time(10).
DATA date LIKE sy-datum.
CALL FUNCTION 'EPS_GET_FILE_ATTRIBUTES'
EXPORTING
file_name = file
dir_name = dir
IMPORTING
file_size = epsf-epsfilsiz
file_owner = epsf-epsfilown
file_mode = epsf-epsfilmod
file_type = epsf-epsfiltyp
file_mtime = mtime
EXCEPTIONS
read_directory_failed = 1
read_attributes_failed = 2
OTHERS = 3.
PERFORM p6_to_date_time_tz(rstr0400) USING mtime
time
date.
WRITE: / mtime,
/ date, time.
pls reward useful answers
thank you!
Andreas -
Relocating files based on creation date
Hello,
I have a folder full of hundreds of Video clips. I am interested in a script that will
1. look at the files sequentially
2. For each file read the creation date
3. If a Folder with that creation date does not exist, create a folder with that creation date (YYYY-MM-DD)
4. Move the file to the folder with the file's creation date
I've never used automator. Is this easy to do using that program?
The reason I want to do this is to avoid having to manually re-organize the videos by date, if I were to import the contents of the existing folder of video clips into iMovie.
Appreciate any input you can provide.
Thanks.Automator is designed to take small, pre-written routines (actions) and string them together into a workflow. There isn't a default action to do something like this, but the Run AppleScript action can be used. Actually, an AppleScript would probably be the way to go, but I just happened to have an Automator action lying around for some reason.
Tested workflow:
1) *Ask for FInder Items* {Type: Folders}
2) *Get Folder Contents* (be careful with getting subfolders - this action will go into packages)
3) *Run AppleScript:*
<pre style="
font-family: Monaco, 'Courier New', Courier, monospace;
font-size: 10px;
font-weight: normal;
margin: 0px;
padding: 5px;
border: 1px solid #000000;
width: 720px; height: 340px;
color: #000000;
background-color: #FFEE80;
overflow: auto;"
title="this text can be pasted into an Automator 'Run AppleScript' action">
on run {input, parameters} -- create folders and move
make new folders from file creation dates (if needed), then move document files into their respective new folders
if no container is specified (missing value), the new folder will be created in the containing folder of the item
if the container is not a valid path (and not missing value), one will be asked for
input: a list of Finder items (aliases) to move
output: a list of the Finder items (aliases) moved
set output to {}
set SkippedItems to {} -- this will be a list of skipped items (errors)
set TheContainer to "" -- a Finder path to a destination folder, or missing value for the source folder
if TheContainer is not missing value then try -- check the destination path
TheContainer as alias
on error
set TheContainer to (choose folder with prompt "Where do you want to move the items?")
end try
tell application "Finder" to repeat with AnItem in the input -- step through each item in the input
if TheContainer is not missing value then -- move to the specified folder
set {class:TheClass, name:TheName, name extension:TheExtension} to item AnItem
else -- move to the source folder
set {class:TheClass, name:TheName, name extension:TheExtension, container:TheContainer} to item AnItem
end if
if TheClass is document file then try -- just documents
set TheDate to text 1 thru 10 of (creation date of AnItem as «class isot» as string) -- YYYY-MM-DD
try -- check if the target folder exists
get ("" & TheContainer & TheDate) as alias
on error -- make a new folder
make new folder at TheContainer with properties {name:TheDate}
end try
-- duplicate AnItem to the result
move AnItem to the result
set the end of output to (result as alias) -- the new file alias
on error -- permissions, etc
-- set the end of SkippedItems to (AnItem as text) -- the full path
set the end of SkippedItems to TheName -- just the name
end try
end repeat
ShowSkippedAlert for SkippedItems
return the output -- pass the result(s) to the next action
end run
to ShowSkippedAlert for SkippedItems
show an alert dialog for any items skipped, with the option to cancel the workflow
parameters - SkippedItems [list]: the items skipped
returns nothing
if SkippedItems is not {} then
set {AlertText, TheCount} to {"Error with AppleScript action", count SkippedItems}
if TheCount is greater than 1 then
set theMessage to (TheCount as text) & space & " items were skipped:"
else
set theMessage to "1 " & " item was skipped:"
end if
set {TempTID, AppleScript's text item delimiters} to {AppleScript's text item delimiters, return}
set {SkippedItems, AppleScript's text item delimiters} to {SkippedItems as text, TempTID}
if button returned of (display alert AlertText message (theMessage & return & SkippedItems) ¬
alternate button "Cancel" default button "OK") is "Cancel" then error number -128
end if
return
end ShowSkippedAlert
</pre> -
How to suppress a row based on current date - at query level?
In an Bex query report i have suppress rows based on current date.
There is no current date available in query.
there is a date field in the query.
If by chance the date in that field is lesser than current date, I have to suppress that row.
How can this be achieved?What is the code ofr creating a variable to get values >= to current date?
I have implemented the following code which is not working.
data L_S_range like line of E_T_range[].
CLEAR L_S_RANGE.
L_S_RANGE-SIGN = 'I'.
L_S_RANGE-OPT = 'GE'.
L_S_RANGE-LOW = SY-DATUM.
APPEND L_S_RANGE TO E_T_RANGE[].
Actually i have written in class, which will be inherited in superclass.
Edited by: akshara20 on Feb 2, 2011 1:21 PM
Maybe you are looking for
-
OSX Maverick iMac Resolution: stuck at 640x480. How do I fix this?
This is my iMac: - 21.5 inch - late 2012 - 2.9 Ghz Intel Core i5 - NVIDIA GeForce GT 650M 512MB - OSX 10.9.2 After updating to Mavericks, the screen resolution somehow got stuck at 640x480 and I'm unable to change it. Going into display settings and
-
Authorization over UIComponents with JSF 2.0
Hi, I'm want to access the components of a requested view and to alter the "rendered" attribute based on authorization rules. Using a Phase Listener I got the components, but only after render response phase, where alterations don't make any effect b
-
Ok so I only have the 4gb (3.63) nano, and I have songs, videos and whatnot, but when I go to the memory used at least half or more is filled with the orange (other). What is this most likely..I would like to get rid of it so I have more memory.
-
Product Release Date being default set to 01-Jan-2000 when exporting and importing product file
Hi there, Just putting this out there to see if anyone else has experienced this problem. We've just redeveloped an art site that relies on the product release date to order work, newest first, by the date they added it {tag_productlist,,,20,release
-
APO Table to identify where cells are fixed
Hello, In DP I'm looking for a means of identifying which cells against which CVCs have been fixed. Is there a table I can look at which references these fixed cells (in the same way as notes are stored)? Any alternative methods of identifying fixed