How to store the data coming from visa into file

Hi ,
I want to store the data into text file,which is coming from visa-read.
I tried visa read to file ,but it's not working.
Am new to labview plz help me out.
Thanks in advance.

CSFGF wrote:
Hi ,
I want to store the data into text file,which is coming from visa-read.
I tried visa read to file ,but it's not working.
Am new to labview plz help me out.
Thanks in advance.
Share the code you have so far with us so that we can check what's going wrong.

Similar Messages

How to store the data coming from network analyser into a text or excel file

Hii everyone
I'm using Agilent 8719ET network analyser and wish to store the data coming from netowrk analyser into a text file/ excel file.
Presently I'm able to get the data on Labview graph using GPIB . Can anyone suggest how to go ahead after collect data sub vi. How can the data be stored into a file apart from showing on the graph?
Attached is the vi for kind consideration...
Looking for help
Regards
Rohit
Attachments:
Agilent 87XX Series Exceed Max Meas.vi ‏43 KB

First let me say that your code really looks pretty good. The data handling could be made more efficient by calculating the number of datapoints that are going to be in the completed dataset and preallocating the entire array -- but depending upon your answer to my questions, the logic in the lower shift register may be going away - so we won't worry about that right now.
The thing I need to know before addressing the data storage question is: Each time you call "Collect and Display Data.vi", how many element are in the array? Are you reading single data points, or a group of data? (BTW: if the answer to that question is obvious based on the way the other VIs are setup, I don't have the drivers so I can't tell what the setup values are.) Second, how fast does the loop iterate? Are we talking msec per loop?, seconds? fortnights?
The issues here are two-fold: how much data? and how fast is it coming? The answer to these will tell you how to save the data.
Mike...
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

How to store the data captured from oscilloscope into the MS Access database table

Hi All,
In my application, I tried to save the data captured from SCOPE, but could store only 200 bytes. I've taken the Memo data type for the field in database. I want to store all data ( 4 channels) in one field & retrieve back and display on the XY Graph.
Thanks in advance.
Regards,
Shrini

kramish wrote:
Im pretty sure that Access does support JDBCNo it does not. It supports ODBC.
just doing a quick Google came up with some pages:
http://blog.taragana.com/index.php/archive/access-microsoft-access-database-from-java-using-jdbc-odbc-bridge-sample-code/
http://www.javaworld.com/javaworld/javaqa/2000-09/03-qa-0922-access.html
Both articles explains how to use the jdbc-odbc bridge. I think I've seen a pure jdbc driver for access but it wasn't from Microsoft and it wasn't free.
Kaj

How to store the data read from excel using java code in Ms access database

Hi. I wrote a code to read the data from excel. May i know how can i save it to Ms access database using java. Also i have many excels. So i should not connect the database using DSN. So is there any other way to achieve this?

kramish wrote:
Im pretty sure that Access does support JDBCNo it does not. It supports ODBC.
just doing a quick Google came up with some pages:
http://blog.taragana.com/index.php/archive/access-microsoft-access-database-from-java-using-jdbc-odbc-bridge-sample-code/
http://www.javaworld.com/javaworld/javaqa/2000-09/03-qa-0922-access.html
Both articles explains how to use the jdbc-odbc bridge. I think I've seen a pure jdbc driver for access but it wasn't from Microsoft and it wasn't free.
Kaj

How to store the datas in a .txt file in to a JTable in Java Swing

Hi sir,
Here i want to know how to store the data's of a .txt file
in to a JTable in java swing.
Where here the .txt file like for eg,spooler.txt is in the server and from there it will come to my client machine what i have to do is to take that .txt file and store the datas of the .txt file
in a JTable.This is what i want.So pls. do help and provide the code as well.I will be thankful.Since i am involved in a project which involves this it is Urgent.
Thanx,
m.ananthu

You can't just display data from a text file in a JTable. You have you understand the structure of the data so that you can parse the data and create a table model that can access the data in a row/column format. Here is an example of a simple program that does this:
http://forum.java.sun.com/thread.jsp?forum=57&thread=315172

How can i use an ao card (pci 6723) to output data and to trigger an ai o acquire the data coming from the ao card?card (pci 6254) t

Hello
I am trying to perform AO (pci 6723) and to trigger my AO card (pci
6254) to read the data coming from the AO card. I am using LV7,1,
win2000.
Is an RTSI cable necessary or I can connect the trigger signals externally ?
I am using the LV example " multi function - synch ai-ao.vi" but i can't for some reason configure the trigger lines.
thank you in advance for your time.
Yiannis

Hello Yiannis,
If I understand you correctly, you want to synchronize your analog input and analog output that are started by a trigger on the analog input board. If you don't want to use the RTSI lines, your best bet is to export the AI Sample Clock and then read it in to the AO board. There is an example on ni.com called DAQmx - Synchronized AIAO Shared Clock. It appears to be having techincal issues so I have attached the example below. To export ai/sampleclock, use DAQmx Export Signal.vi after Get Terminal Name with Device Prefix.vi. Export Sample Clock to PFI3 (There are only connections between the sample clock and PCI3/4/8/9). Connect PFI3 on your AI board to PFI0 on your AO board (with a wire). Then change the source for the AO Timing.vi to Devx/PFI0. If you want to do triggering, stick the DAQmx Trigger.vi between the Timing property node and the DAQmx Start.vi on the AI task. I have shown how to do this in the modified version below. Please take a look at it and let me know if you have any questions. If you still get an error please take a screenshot of it and post to the forum. Have a great day!
Sincerely,
Marni S.
Attachments:
Synchronized_AIAO_Shared_Clock[Modified].vi ‏140 KB

How to convert the date time from MM-DD-YYYThh:mm:ss to YYYY-MM-DDThh:mm:ss format

Hi All,
I have a requirement in my project like to convert the date time from one format to another.my situation is like to convert the date time from MM-DD-YYYThh:mm:ss to YYYY-MM-DDThh:mm:ss format. I am using the soa suite 11.1.1.6.
Can any one suggest me how to convert in the BPEL transformation.
Thanks,
Sanju.

Hi Sanju,
Store the date to be converted into a variable viz. dateVar. Now, process an expression in assign as: xp20:format-dateTime($dateVar,'[Y0001]-[M01]-[D01] [h]:[m01]:[s01]').
Regards

How to find the data loaded from r/3 to bw

hi
how to find the data loaded from r/3 to bw is correct . i am not able to find which feild in the query is connected to which feild in the r/3 . where i am geting the data from r/3 . is there any process to find which feild and table the data is comming from . plz help
thanks in advance to u all

Hi Veda ... the mapping between R/3 fields and BW InfoObjects should take place in Transfer Rules. Other transformation could take place in Update Rule.
So you could proceed this way: look at InfoProvider Data Model and see if the Query does perform any calculation (even with Virtual keyfigures / chars). Than go back to Update Rules and search for other calculation / transformation. At least there are Tranfer Rule and eventually DataSource / Extraction Enhancements.
As you can easily get there are many points where you have to look for ... it's a quite complex work but very usefull.
Once you will have identified all mappings / transfromation see if BW data matchs R/3 (considering calculations ...)
Good job
GFV

How to get the date starting from 1 to the current date from the system dat

Dear all,
Please tell me how to get the date starting from 1 based on the system date
and it should come with respect of time also.
example.
suppose today is 6 Dec, 2006
so ABAP report should find the 1 dec. 2006.
Please help me as soon as possible.
Regards,

concatenate sy-datum0(2) '01' sy-datum4(4) into v_firstdate.
or yo ucan use the fm:
HR_JP_MONTH_BEGIN_END_DATE
usage:
    call function 'HR_JP_MONTH_BEGIN_END_DATE'
         exporting
              iv_date             = sy-datum
         importing
              ev_month_begin_date = gv_begda
              ev_month_end_date   = gv_endda.
Regards,
Ravi
Message was edited by:
        Ravi Kanth Talagana

How to migrate the data flow from DB CONNECT sourse system from 3.5 to BI

Hi
can any one tell me how to migrate the data flow from DB CONNECT sourse system from 3.5 to BI 7.

Hi,
Go to Infoprovider to which your DB connect DS feeds and Right Click on Data source-> Then Migrate-> With Export---> You have to build new 7.0 Transformations and DTP's etc.
~AK

How to save the data of ABAP report into a notepad in desktop location???

HI all,
Can any one tell me how to transfer the data of ABAP report into a Notepad.
Actually I have to schedule a ABAP report in background on daily basis and I want to transfer the
whole record into Notepad.
If any program is available for this..please clearify the relevent code for transferring.
Thanks
Rajeev

declare a character type internal table.
now move your data from it_data ( internal table with data ) into table itab.
since you are running this report in background, you cannot save it to the desktop. Instead give any app server location
data: itab(400) occurs 0 with header line.
field-symbols: <fs1> type any.
data: gv_file type rlgrap-filename default 'TEST.TXT'.
data: gv_filepath type rlgrap-filename default <path>.
LOOP AT it_data.
    DO 100 TIMES.
      ASSIGN COMPONENT sy-index OF STRUCTURE it_data TO <fs1>.
      IF sy-subrc = 0.
        CONCATENATE itab <fs1> INTO itab SEPARATED BY ' '.
      ELSE.
        EXIT.
      ENDIF.
    ENDDO.
    SHIFT itab LEFT DELETING LEADING ' '.
    APPEND itab.
    CLEAR itab.
ENDLOOP.
concatenate gv_filepath '/' gv_file into gv_file.
OPEN DATASET gv_file FOR OUTPUT IN TEXT MODE ENCODING DEFAULT.
IF sy-subrc = 0.
    LOOP AT itab.
      TRANSFER itab TO gv_file.
    ENDLOOP.
    CLOSE DATASET gv_file.
ENDIF.

SQL Loader-How to insert -ve & date values from flat text file into coloumn

Question: How to insert -ve & date values from flat text file into coloumns in a table.
Explanation: In the text file, the negative values are like -10201.30 or 15317.10- and the date values are as DDMMYYYY (like 10052001 for 10th May, 2002).
How to load such values in columns of database using SQL Loader?
Please guide.

Question: How to insert -ve & date values from flat text file into coloumns in a table.
Explanation: In the text file, the negative values are like -10201.30 or 15317.10- and the date values are as DDMMYYYY (like 10052001 for 10th May, 2002).
How to load such values in columns of database using SQL Loader?
Please guide. Try something like
someDate    DATE 'DDMMYYYY'
someNumber1      "TO_NUMBER ('s99999999.00')"
someNumber2      "TO_NUMBER ('99999999.00s')"Good luck,
Eric Kamradt

How to find the dsn name from an *.rpd file provided?

How to find the dsn name from an *.rpd file provided? All the ODBC details which would require to run your dashboard.

Hi
DSN name is not a part of .rpd file. So There is no information about DSN name in .rpd file.
Thanks
Siddhartha P

How to update dunning data coming from a file to data base

Hi,
we have a requirement wherein we are getting the dunning level, dunning date and reason code data for customer accounts from a file and they have to be updated in the customer master data (knb5 table) and document level (bseg-rstgr).
If anyone knows about any function modules or bapi which can fulfill this requirement please let us know asap.
Thanks,
Simmi

CSFGF wrote:
Hi ,
I want to store the data into text file,which is coming from visa-read.
I tried visa read to file ,but it's not working.
Am new to labview plz help me out.
Thanks in advance.
Share the code you have so far with us so that we can check what's going wrong.

How to store the data of a file into an ArrayList?

Hi! everyone.
I want to know
if I have a File, and the data in the file are type int, type String...
And I have a ArrayList which is of type Question
How do I store the data of that file into the ArrayList
I tried to use the while loop(use the hasNextLine() to read the data line by line)
But I cannot add data which are not of type Question to the ArrayList.
Can you tell me what I should do, please?
I also wonder that
The data of the file are of many types, but when I try to read it with the nextLine(), the data all turn out to be of type String. Why?
Thank you.
Edited by: Terry001 on Apr 30, 2008 1:13 PM

No, a line in the file is just part of a question
The format of the file is like this:
*<question type code>                    :     String*
*<question point value>                    :     int*
*<question category>                         :     String*
*<question difficulty level>               :     int*
*<question text>                              :     String*
*<question correct answer>               :     String*
*<optional question-specific data>     :     String*
*<question terminator>                    :     String*
And here is an example
TF //TrueFalseQuestion
5 //points value
None //category
3 //difficulty level
The capital of the United States is Washington, D.C. //question text
True // answer
*** //quetion terminator
I created an ArrayList in the Test class:
private ArrayList<Question> questions; // Create inside constructor
    public Test (String name, String instr)
        testName = name;
        scoreEarned = 0;
        scorePossible = 0;
        instructions = instr;
        questions = new ArrayList<Question>(); //[MAX_NUMBER_OF_QUESTIONS];
    }And I tried to use the following method to store the data of the file to the ArrayList
// This method loads a set of questions from a plain text file
    public void loadQuestionsFromFile(String fileName) throws FileNotFoundException
        try
            File fileReader = new File("input.txt");
            Scanner sc = new Scanner(fileReader);
            while (sc.hasNextLine())
                // I don't know how to pass the data I got from the nextLine() method to the ArrayList because they are of different type
        catch (FileNotFoundException a)
            System.out.println(a);
    }    As all you said, I should create an Question object in the while loop
Question temp = new Question ();But I have no idea how to pass the int and String to the Question object.
Thank you

How to store the data coming from visa into file

Similar Messages

Maybe you are looking for