How to store the value in table

Hi All,
I ve a requirement where im adding a check box on a seeded supplier_create page via personalization. The seeded page contains only a root AM and a root controller.The table which stores the supplier details does not have a dff.so i have to store a yes or no value and a foreign key ref into a custom table to map both the tables. the rootAM is actually calling the underlying seededVO to create a row in the database.Now how can I insert the yes/no and the foreign key values into my custom table??
Thanks.

Isn't there any other column in the table which you can use?
Anyway you can call a PLSQL API (to create a row in the Custom Table and store the value and also to make a foreign key join therein). This PLSQL can be called from the Controller (extend the standard Controller).
Now when you come to the Page, either you substitute the standard VO, or easier still (since I assume checkbox is on the Page and not in the table), you can call a PLSQL function and get the value of the checkbox. May be you can also create a dymanic VO and get the value from the Custom table for the current standard table row.
Please do a compete thinking on the idea above and do let me know where you forsee issues. The above solution focusses more on PLSQL API invocations and thus decreases the need for Substitutions.
Thanks
Sumit

Similar Messages

  • Commit not allowed in Trigger  then how to store the values in table

    Hi,
    Database trigger not allowed to COMMIT in it (directly) or in procedure which is calling from the Trigger. it gives error.
    so my question is:-
    1)How Database internally store the INSERT AND UPDATE value in table which is written in procedure without COMMIT?
    2) Is it necessary to write COMMIT in procedure using PRAGAMA AUTONOMOUS TRANSACTION to store inserted or updated value in table?
    Thanks in advance.

    Hi,
    A trigger is designed to be a part of a transaction, not it's end.
    It is like following these steps (not really accurate, but should give an idea):
    1. programA issues INSERT statement on tableA
    2. 'control' goes over to the database
    3. constraint checks happen
    4. the associated triggers on tableA do their work (e.g. fetching a sequence value for a primary key)
    5. 'control' goes back to programA
    6. programA decides if a commit (no error occurred) or a rollback (error case) has to be issued.
    Did this help? Probably not, I'm not happy with what I wrote, but anyway... :)

  • How to store the images in tables

    how to store the images in tables .what is the use of "clob ,blob"

    Using with the CLOB or BLOB, you can store the images in the table.
    Srini C

  • How to store the value to variable?

    hi
    plz c the below code...
    my prblm is i want to store the value of wa_final-preis into new_xeipa-preis if there is only one ebeln...
    if there are more procss orders then i want to save the first value to new_xeipa-preis wn second record comes then new_xeipa-preis should be replaced by new value and old_xeipa-preis replaced by old value....
    how to do this?
    LOOP AT xeipa INTO wa_xeipa.
      idx = sy-tabix.
      CLEAR: wa_xeina.
        READ TABLE xeina INTO wa_xeina WITH KEY infnr = wa_xeipa-infnr.
        IF sy-subrc is INITIAL.
        wa_final-infnr = wa_xeipa-infnr.
        wa_final-ebeln = wa_xeipa-ebeln.
        wa_final-bedat = wa_xeipa-bedat.
        wa_final-matnr = wa_xeina-matnr.
        wa_final-lifnr = wa_xeina-lifnr.
        wa_final-peinh = wa_xeipa-peinh.
        wa_final-preis = wa_xeipa-preis.        "net price
        wa_final-bprme = wa_xeipa-bprme.
        wa_final-bwaer = wa_xeipa-bwaer.
        IF ( wa_final-infnr is NOT INITIAL ) AND ( wa_final-ebeln is NOT INITIAL ) .
        ABWEICHUNG = ( new_xeipa-preis / old_xeipa-preis ) * 100 .
        ENDIF.
        append wa_final to it_final.
        ENDIF.

    Hi Smitha,
    Check the below given code.
    LOOP AT xeipa INTO wa_xeipa.
      idx = sy-tabix.
      CLEAR: wa_xeina.
        READ TABLE xeina INTO wa_xeina WITH KEY infnr = wa_xeipa-infnr.
        IF sy-subrc is INITIAL.
        wa_final-infnr = wa_xeipa-infnr.
        wa_final-ebeln = wa_xeipa-ebeln.
        wa_final-bedat = wa_xeipa-bedat.
        wa_final-matnr = wa_xeina-matnr.
        wa_final-lifnr = wa_xeina-lifnr.
        wa_final-peinh = wa_xeipa-peinh.
        wa_final-preis = wa_xeipa-preis.        "net price
        wa_final-bprme = wa_xeipa-bprme.
        wa_final-bwaer = wa_xeipa-bwaer.
    " First time this value is not populated. When the second value comes in,
    " New value gets populated in OLD variable and New value is replaced with the latest.
        *IF idx NE 1.*
          *old_xeipa-preis = new_xeipa-preis.*
        *ENDIF.*
        *new_xeipa-preis = wa_xeipa-preis.*
      IF ( wa_final-infnr is NOT INITIAL ) AND ( wa_final-ebeln is NOT INITIAL ) .
        ABWEICHUNG = ( new_xeipa-preis / old_xeipa-preis ) * 100 .
        ENDIF.
        append wa_final to it_final.
        ENDIF.
    ENDLOOP.
    I hope this is what you were looking for.
    Thanks & Regards,
    Ram.
    Edited by: ram Kumar on Jun 12, 2009 5:16 PM

  • How to get the values from table region and how to set

    Hi,
    I have a requirement as Seeded Page Having One Table Region having around 8 columns, In That Item Description field is there. My Requirement is I need add one more field for that Region and assign the value depending Item Description.
    I will create one new Item in that region and will give name as Item, But how to set the values to Item Depending on Item Description.
    Is it possible to through CO Extension, If yes..Pls help how to get it.
    Thanks in Advance,
    Hanimi

    Hi Hanimi,
    1. You need to extend the VO, add a new Attribute.
    2. In VORowImpl of the extended VO, you can find the getter for your new attribute (example getItem())
    3. In this getter method you can write some code like:
    if("ABC".equals(getItemDescription())
    return "XYZ" ;
    -Prince
    http://princekapoor82.blogspot.com

  • How to check the value in Table CDPOS

    Mostly I can't see the following fields value in the table CDPOS,
      (1) CDPOS-VALUE_NEW
      (2) CDPOS-VALUE_OLD
    In fact, it should have values, so how to check the values, is there any special method needed?
    Thanks and best regards.

    Ferry Lianto,
    Thank you very much for your expertise.
    It's helpful to get some contents via FM:CHANGEDOCUMENT_READ_POSITIONS, the problem is, to some kind of DELETION operation, the log in table CDPOS is very simple, I still don't know which contents were deleted even though I found records in table CDPOS.
    Is there any other suggestions?
    Thanks and best regards.

  • How to store the value of request message and use it in Response mapping

    Hi All,
    We have an requirement where we need to store the data coming in Request Mapping and use the stored value in Response Mapping. Can anybody help us in how to proceed?
    Thanks
    Sujata

    Hi!
    In Mapping you may use the RFC Lookup function to store values in database table during request mapping and to read values from database table during response mapping.
    You can also use an ABAP or Java Mapping "in front of your" message mapping to store/read the values.
    You can also use an Adapter Module (if applicable for the adapter type you use) and/or a UDF to store the data e.g. in Dynmaic Configuration Header of Request Message and to read these data from Dynamic Configuration Header of Response Message. But this works only for synchronous scenarios (and it means overhead in your message traffic).
    Hope these thinkings help you o find the most suitable way for your concrete scenario!
    Regards,
    Volker
    Note:
    These techniques help you to avoid using BPM.
    Edited by: Volker Kolberg on Aug 27, 2009 11:18 AM

  • How to get the values from table SKB1 R/3  to SRM

    Hi Gurus,
    My requirement is to get all the values from the table SKB1 to SRM (i.e. in to an internal table) for doing some validation(G/L account XXXXXX requires an assignment to a CO objectXXXXXX.)
    Like wise I have many tables for doing validation in SRM
    Help me how to get this, suggest me any Function module with sample code.
    OR
    Any Standard FM which will give all the values of the fields in the table SKB1 when I pass the key fields G/L account & company code alone so that I can improve the performance.
    Suggest me.
    Regards
    Paul

    Hi,
    You can use the FM 's META_READ_TABLE Or RFC_READ_TABLE
    Which SRM / Backend system version are you using ?
    Are you taking care of the Importing paramater - DELIMITER in this case.. ??*
    See related links ->
    Re: Retrieving data from R/3 into SRM
    Re: Product Search TIME lag
    Else you can just call the remote enabled  FM "BAPI_GL_ACC_GETDETAIL"  from SRM.
    BR,
    Disha.
    Do reward points for useufl answers.

  • How to store the value of sum of group in Crystal Report at the runtime!

    Hello all,
    I creates a Formula Field that hold the value of Sum of Group in Crystal Report. I would like to know how to store it in a variable and pass it to store procedure. Is it an option in Crystal report to do it. I knew that Crystal Report can cache the report for sharing. My detailed issue as following:
    - Created a Formula Field named TOTAL AMOUNT that calculated the complex expression. This TOTAL AMOUNT is dynamic based on group and variables.
    - I would like to store that value from TOTAL AMOUNT and pass it to the stored procedure parameter IN.
    Any helps are much appreciated. Thanks.

    I doubt that this is possible since it would only calculate this value once the report has data.  This sounds more like a report design question that should be asked over [here|SAP Crystal Reports;

  • Please help..it's Urgent..How to fetch the value from table row from Page

    Hi,
    I have created a table with 2 LOV's , LOV2 is dependent on LOV2.
    Here I can not use the general Dependent LOV concept, as these values are coming from 2 different LookUps.
    I am not able to fetch the user input for LOV1 (from page) .that is why not able to set the where cluse fro 2nd LOVVO.
    I have used this code:
    if ("ViolationCat".equals(lovInputSourceId)) {
    OAMessageLovInputBean msglov =
    (OAMessageLovInputBean)webBean.findChildRecursive("ViolationCat");
    // String p_violation_category = "'"+(String)msglov.getValue(pageContext)+"'";
    String p_violation_category =
    (String)msglov.getValue(pageContext);
    // System.out.println(" p_violation_category =" +
    // p_violation_category);
    String v_violation_category = "";
    //System.out.println("vcat=" + vCat);
    OAViewObject violationVO =
    (OAViewObject)am.findViewObject("SNI_Violation_DtlsVO2");
    Number vcatViolationIdnum =
    (Number)violationVO.getCurrentRow().getAttribute("ViolationId");
    String vcatViolationId = "" + vcatViolationIdnum;
    pageContext.putTransactionValue("vcatViolationId",
    vcatViolationId);
    pageContext.putTransactionValue("p_violation_category",
    p_violation_category);
    String query =
    " SELECT LOOKUP_CODE, \n" + " MEANING, \n" +
    " LOOKUP_TYPE \n" +
    " FROM apps.fnd_lookup_values \n" +
    " WHERE LOOKUP_TYPE ='SNI_VIOLATION_CATEGORY' AND MEANING=?";
    PreparedStatement ps = txn.createPreparedStatement(query, 1);
    try {
    ps.setString(1, p_violation_category);
    ResultSet rs = ps.executeQuery();
    //System.out.println("before while,");
    // rs.next();
    // v_violation_category = rs.getString("LOOKUP_CODE");
    // System.out.println("v_violation_category="+v_violation_category);
    while (rs.next()) {
    //System.out.println("inside while");
    v_violation_category = rs.getString("LOOKUP_CODE");
    // System.out.println("v_violation_category=" +
    // v_violation_category);
    ps.close();
    } //try ends
    catch (Exception e) {
    e.getMessage();
    //System.out.println("in catch.." + e.getMessage());
    OAViewObject subCatVO =
    (OAViewObject)am.findViewObject("SNI_ViolationSubCategoryVO1");
    //System.out.println("get VO before where clause: subCatVO::"+subCatVO.getQuery());
    subCatVO.setWhereClause("LOOKUP_TYPE like '%SNI_VIOL_SUB_CAT_" +
    v_violation_category + "'");
    System.out.println("after set where clause VO: subCat VO::" +
    subCatVO.getQuery());
    subCatVO.executeQuery();
    // System.out.println("query of subCat VO::" +
    // subCatVO.getQuery());
    //End of sub category Validation
    It is working fine only for the 1st row of teh table.
    I have tried to fetch the value using :
    String violationCategory = (String)violationVO.getCurrentRow().getAttribute("ViolationCategory");
    String violationSubcategory = (String)violationVO.getCurrentRow().getAttribute("ViolationSubcategory");
    But it is fetching null value.
    Please tell me how can I able to fetch the values.

    Hi
    in your scenarion,first u have to identify the particular row of table where the changes is being made ,u have to use this code .when u select the lov ,first it will give the row refernce and then u have to catch the lov event
    OAApplicationModule am =
    (OAApplicationModule)pageContext.getApplicationModule(webBean);
    String event = pageContext.getParameter("event");
    if ("<ItemPPREventName>").equals(event))
    // Get the identifier of the PPR event source row
    String rowReference =
    262
    pageContext.getParameter(OAWebBeanConstants.EVENT_SOURCE_ROW_REFERENCE);
    Serializable[] parameters = { rowReference };
    // Pass the rowReference to a "handler" method in the application module.
    am.invokeMethod("<handleSomeEvent>", parameters);
    In your application module's "handler" method, add the following code to access the source row:
    OARow row = (OARow)findRowByRef(rowReference);
    if (row != null)
    thanx
    Pratap

  • How to justify the values in table using report generation tool kit

    Hi
    How can we align the values in excel table using report generation toolkit.
    like left,right,center.
    Regards,
    hari
    Attachments:
    Report_excel.vi ‏34 KB
    New Bitmap Image.JPG ‏134 KB

    Hi,
    A trigger is designed to be a part of a transaction, not it's end.
    It is like following these steps (not really accurate, but should give an idea):
    1. programA issues INSERT statement on tableA
    2. 'control' goes over to the database
    3. constraint checks happen
    4. the associated triggers on tableA do their work (e.g. fetching a sequence value for a primary key)
    5. 'control' goes back to programA
    6. programA decides if a commit (no error occurred) or a rollback (error case) has to be issued.
    Did this help? Probably not, I'm not happy with what I wrote, but anyway... :)

  • How to store the value into variable and access it in RMAN script

    I want to create a variable and dynamically assign a numeric value to it (may get the value may be from SQL )and access the value in RMAN script.
    Thanks...Raj

    Raj,
    We have been getting this type of request and it is not possible via RMAN to do that.
    BUT--You could write a sql/plus script to query your variable and produce the RMAN script with the new value.
    Just a suggestion.
    Tammy

  • How to Get the value in a new created view.

    Hi Experts,
    I have create a view along with the fields: Street No. , Street name, apt no,
    how should i capture these values . in a current situation i entering the value but when i check in the debugging mode : in a collection_wrapper (context node class) i am not able the see the value which i have entered. please help me out. it is  very urgent.
    Rohit

    Hi Ashish,
    Thanks for replying. i have already create the context node and in the using the request from field method ,i am getting the value in my work area but how to store the value in the custom fields of that particular order  as well as store the value in the crmd_customer_i table...
    Regards,
    Rohit

  • In eCATT, How to mention the values as  input parameter during test script

    Hi,
    1. I am just learning eCATT tool. I created a Test Script by recording my transaction. But if i want to execute the recorded transaction with different data then how to store the values.
    2. How to execute my Test Script created in one client to another client of same server. is it just by mentioning the target system or do we have to do anything in anothere client.
    Lakshmi

    Hi
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a0e0ebec-c9da-2910-689e-b1a22a621c7f
    Manoj Shakya.

  • How to compare the values stored in the list

    Hi,
    I am having the requirement that i want to compare the values stored in the list.How to store the values in the list and compare the list values stored inside it.
    Regards,
    Ahamad

    http://java.sun.com/j2se/1.5.0/docs/api/java/util/Collections.html#sort(java.util.List)
    http://java.sun.com/j2se/1.5.0/docs/api/java/util/Collections.html#sort(java.util.List,%20java.util.Comparator)
    http://java.sun.com/j2se/1.5.0/docs/api/java/util/Comparator.html
    http://java.sun.com/j2se/1.5.0/docs/api/java/lang/Comparable.html

Maybe you are looking for

  • Error while extending iSupply Portal VO

    I try to extending iSupply Portal PosPosummaryVO by create a new view object, and extend PosPosummaryVO. after sql statement step, I appear a error message " Each row in the Query Result Columns must be mapped to a uniqe Query Attribute in the Mapped

  • Photoshop CS4 Extended and Lion 10.7.4

    Does Adobe Photoshop CS4 Extended work on Lion 10.7.4? when I get the "Licensing for this product has stopped working" and I advance to where I'm to click on the License RecoveryLauncher.app it does not appear. A file called License Recovery Launcher

  • IPad 2 - email shuts down when trying to delete messages

    Whenever I try to delete email messages, I click on "Edit", check the messages to be deleted. The red Delete button shows up and as soon as I touch it the entire email program shuts down and returns to the home page. The next "Delete Message" button

  • Which driver to use for Satellite A300 - Latest one, by date or by version?

    For my laptop (A300-1HV) I am looking at the driver downloads available. There are many drivers which have a LATER modified date but LOWER version number. Or if you like, an EARLIER modified date and HIGHER version number. How do I decide which is th

  • French language messages.

    My forms created with Designer 7.0 are working fine. My users are using Reader 7 and 8. My problem is some of the users are French and are of course receiving the standard Acrobat messages: "Data typed into this form will not be saved..." etc. I have