How to stored data after clicking checkbox in data base table
REPORT ZT .
TYPE-pools: slis.
tables:mkpf,mseg,mard,COWB_COMP,ZTABLE.
Types:BEGIN OF tp_data,
mblnr LIKE mseg-mblnr,
matnr LIKE mseg-matnr,
werks LIKE mard-werks,
lgort LIKE mard-lgort,
lgpbe LIKE mard-lgpbe,
charg LIKE mseg-charg,
bwart LIKE mseg-bwart,
budat LIKE mkpf-budat,
menge LIKE mseg-menge,
meins LIKE mseg-meins,
kostl LIKE mseg-kostl,
aufnr LIKE mseg-aufnr,
rsnum LIKE mseg-rsnum,
endkz like COWB_COMP-endkz,
END OF tp_data,
tp_tbl_data TYPE STANDARD TABLE OF tp_data.
MODIFIED*******************
DATA: WA TYPE TP_DATA.
MODIFIED*******************
*data: t_data like Y00_MM_ISSUE_DAT occurs 0 with header line.
Constants
Data objects (variable declarations and definitions)
Report data to be shown.
DATA: it_data TYPE STANDARD TABLE OF tp_data.
MODIFIED*******************
DATA : V_REPID LIKE SY-REPID.
MODIFIED*******************
Heading of the report.
DATA: t_heading TYPE slis_t_listheader.
*========================== Selection Screen
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
SELECT-OPTIONS:smblnr FOR mseg-mblnr MODIF ID m1,
smatnr FOR mseg-matnr MODIF ID m2,
swerks FOR mard-werks MODIF ID m3,
slgort FOR mard-lgort MODIF ID m4,
slgpbe FOR mard-lgpbe MODIF ID m5,
scharg FOR mseg-charg MODIF ID m6,
sbwart FOR mseg-bwart MODIF ID m7,
skostl FOR mseg-kostl MODIF ID m8,
saufnr FOR mseg-aufnr MODIF ID m9,
srsnum FOR mseg-rsnum MODIF ID m10.
SELECTION-SCREEN END OF BLOCK b1.
SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME TITLE text-002.
PARAMETERS:pre RADIOBUTTON GROUP radi USER-COMMAND ucomm DEFAULT 'X',
pse RADIOBUTTON GROUP radi,
bps RADIOBUTTON GROUP radi.
SELECTION-SCREEN END OF BLOCK b2.
SELECTION-SCREEN BEGIN OF BLOCK b3 WITH FRAME TITLE text-003.
PARAMETER:layout TYPE i.
SELECTION-SCREEN END OF BLOCK b3.
MODIFIED*******************
INITIALIZATION.
V_REPID = sy-repid.
MODIFIED*******************
*=========================== Event Blocks
AT selection-SCREEN.
start-OF-selection.
PERFORM get_data USING it_data.
END-OF-selection.
PERFORM build_alv USING it_data t_heading.
*=========================== Subroutines
*& Form get_data
Gets the information to be shown in the report.
FORM get_data USING t_data TYPE tp_tbl_data.
SELECT msegmblnr msegmatnr mardwerks mardlgort mard~lgpbe
msegcharg msegbwart mkpf~budat
msegmenge msegmeins msegkostl msegaufnr mseg~rsnum
INTO CORRESPONDING FIELDS OF TABLE t_data
FROM mseg
JOIN mard ON mardmatnr EQ msegmatnr
JOIN mkpf ON msegmblnr EQ mkpfmblnr
WHERE mseg~matnr IN smatnr.
ENDFORM. " get_data
*& Form build_alv
Builds and display the ALV Grid.
FORM build_alv USING t_data TYPE tp_tbl_data
t_heading TYPE slis_t_listheader.
ALV required data objects.
DATA: w_title TYPE lvc_title,
w_comm TYPE slis_formname,
w_status TYPE slis_formname,
x_layout TYPE slis_layout_alv,
t_event TYPE slis_t_event,
t_fieldcat TYPE slis_t_fieldcat_alv,
t_sort TYPE slis_t_sortinfo_alv.
REFRESH t_fieldcat.
REFRESH t_event.
REFRESH t_sort.
CLEAR x_layout.
CLEAR w_title.
Field Catalog
PERFORM set_fieldcat2 USING:
1 'MBLNR' 'MBLNR' 'MSEG' space space space space space space
space space space space space space t_fieldcat ,
2 'MATNR' 'MATNR' 'MSEG' space space space space space space
space space space space space space t_fieldcat ,
3 'WERKS' 'WERKS' 'MARD' space space space space space space
space space space space space space t_fieldcat,
4 'LGORT' 'LGORT' 'MARD' space space space space space space
space space space space space space t_fieldcat ,
5 'LGPBE' 'LGPBE' 'MARD' space space space space space space
space space space space space space t_fieldcat ,
6 'CHARG' 'CHARG' 'MSEG' space space space space space space
space space space space space space t_fieldcat ,
7 'BWART' 'BWART' 'MSEG' space space space space space space
space space space space space space t_fieldcat,
8 'BUDAT' 'BUDAT' 'MKPF' space space space space space space
space space space space space space t_fieldcat,
9 'MENGE' 'MENGE' 'MSEG' space space space space space space
space space space space space space t_fieldcat,
10 'MEINS' 'MEINS' 'MSEG' space space space space space space
space space space space space space t_fieldcat,
11 'KOSTL' 'KOSTL' 'MSEG' space space space space space space
space space space space space space t_fieldcat,
12 'AUFNR' 'AUFNR' 'MSEG' space space space space space space
space space space space space space t_fieldcat,
13 'RSNUM' 'RSNUM' 'MSEG' space space space space space space
space space space space space space t_fieldcat,
14 'ENDKZ' 'ENDKZ' 'COWB_COMP' space space 'select' 'Select this row' 'Sel' 'Select this row' space space space 'X' 'X' space t_fieldcat.
Layout
x_layout-zebra = 'X'.
Top of page heading
PERFORM set_top_page_heading USING t_heading t_event.
Events
PERFORM set_events USING t_event.
GUI Status
w_status = ''.
User commands
w_comm = 'USER_COMMAND'.
Order
Example
PERFORM set_order USING '<field>' 'IT_DATA' 'X' space space t_sort.
PERFORM set_order USING 'MBLNR' 'IT_DATA' 'X' space 'X' t_sort.
PERFORM set_order USING 'EBELN' 'IT_DATA' 'X' space 'X' t_sort.
PERFORM set_order USING 'EBELP' 'IT_DATA' 'X' space space t_sort.
Displays the ALV grid
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_callback_program = V_REPID
it_fieldcat = t_fieldcat
is_layout = x_layout
it_sort = t_sort
i_callback_pf_status_set = w_status
i_callback_user_command = w_comm
i_save = 'X'
it_events = t_event
i_grid_title = w_title
TABLES
t_outtab = t_data
EXCEPTIONS
program_error = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM. " build_alv.
*& Form set_top_page_heading
Creates the report headings.
FORM set_top_page_heading USING t_heading TYPE slis_t_listheader
t_events TYPE slis_t_event.
DATA: x_heading TYPE slis_listheader,
x_event TYPE LINE OF slis_t_event.
Report title
CLEAR t_heading[].
CLEAR x_heading.
x_heading-typ = 'H'.
x_heading-info = 'Reporte Prueba'(001).
APPEND x_heading TO t_heading.
Program name
CLEAR x_heading.
x_heading-typ = 'S'.
x_heading-KEY = 'Program: '.
x_heading-info = sy-repid.
APPEND x_heading TO t_heading.
User who is running the report
CLEAR x_heading.
x_heading-typ = 'S'.
x_heading-KEY = 'User: '.
x_heading-info = sy-uname.
APPEND x_heading TO t_heading.
Date of execution
CLEAR x_heading.
x_heading-typ = 'S'.
x_heading-KEY = 'Date: '.
WRITE sy-datum TO x_heading-info.
APPEND x_heading TO t_heading.
Time of execution
CLEAR x_heading.
x_heading-typ = 'S'.
x_heading-KEY = 'Time: '.
WRITE sy-uzeit TO x_heading-info.
APPEND x_heading TO t_heading.
Top of page event
x_event-name = slis_ev_top_of_page.
x_event-FORM = 'TOP_OF_PAGE'.
APPEND x_event TO t_events.
ENDFORM.
*& Form set_events
Sets the events for ALV.
The TOP_OF_PAGE event is alredy being registered in
the set_top_page_heading subroutine.
FORM set_events USING t_events TYPE slis_t_event.
DATA: x_event TYPE LINE OF slis_t_event.
Example
clear x_event.
x_event-name = .
x_event-form = .
append x_event to t_event.
ENDFORM.
*& Form set_order
Adds an entry to the order table.
FORM set_order USING p_fieldname p_tabname p_up p_down p_subtot
t_sort TYPE slis_t_sortinfo_alv.
DATA: x_sort TYPE slis_sortinfo_alv.
CLEAR x_sort.
x_sort-fieldname = p_fieldname.
x_sort-tabname = p_tabname.
x_sort-UP = p_up.
x_sort-down = p_down.
x_sort-subtot = p_subtot.
APPEND x_sort TO t_sort.
ENDFORM. "set_order
*& Form set_fieldcat2
Adds an entry to the field catalog.
FORM set_fieldcat2 USING p_colpos p_fieldname p_ref_fieldname
p_ref_tabname
p_outputlen p_noout
p_seltext_m p_seltext_l p_seltext_s p_reptext_ddic p_ddictxt
p_hotspot p_showasicon p_checkbox p_edit
p_dosum
t_fieldcat TYPE slis_t_fieldcat_alv.
DATA: wa_fieldcat TYPE slis_fieldcat_alv.
CLEAR wa_fieldcat.
General settings
wa_fieldcat-fieldname = p_fieldname.
wa_fieldcat-col_pos = p_colpos.
wa_fieldcat-no_out = p_noout.
wa_fieldcat-HOTSPOT = p_hotspot.
wa_fieldcat-CHECKBOX = p_checkbox.
wa_fieldcat-ICON = p_showasicon.
wa_fieldcat-do_sum = p_dosum.
Set reference fieldname, tablenam and rollname.
If p_ref_tabname is not given, the ref_fieldname given is a data
*element.
If p_ref_tabname is given, the ref_fieldname given is a field of a
*table. In case ref_fieldname is not given, it is copied from the
*fieldname.
IF p_ref_tabname IS INITIAL.
wa_fieldcat-rollname = p_ref_fieldname.
ELSE.
wa_fieldcat-ref_tabname = p_ref_tabname.
IF p_ref_fieldname EQ space.
wa_fieldcat-ref_fieldname = wa_fieldcat-fieldname.
ELSE.
wa_fieldcat-ref_fieldname = p_ref_fieldname.
ENDIF.
ENDIF.
Set output length.
IF NOT p_outputlen IS INITIAL.
wa_fieldcat-outputlen = p_outputlen.
ENDIF.
Set text headers.
IF NOT p_seltext_m IS INITIAL.
wa_fieldcat-seltext_m = p_seltext_m.
ENDIF.
IF NOT p_seltext_l IS INITIAL.
wa_fieldcat-seltext_l = p_seltext_l.
ENDIF.
IF NOT p_seltext_s IS INITIAL.
wa_fieldcat-seltext_s = p_seltext_s.
ENDIF.
IF NOT p_reptext_ddic IS INITIAL.
wa_fieldcat-reptext_ddic = p_reptext_ddic.
ENDIF.
IF NOT p_ddictxt IS INITIAL.
wa_fieldcat-ddictxt = p_ddictxt.
ENDIF.
Set as editable or not.
IF NOT p_edit IS INITIAL.
wa_fieldcat-INPUT = 'X'.
wa_fieldcat-EDIT = 'X'.
ENDIF.
APPEND wa_fieldcat TO t_fieldcat.
ENDFORM. "set_fieldcat2
*& Form top_of_page
Called on top_of_page ALV event.
Prints the heading.
FORM top_of_page.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
i_logo = 'TRVPICTURE04'
it_list_commentary = t_heading.
ENDFORM. " alv_top_of_page
*& Form user_command
Called on user_command ALV event.
Executes custom commands.
FORM user_command USING r_ucomm LIKE sy-ucomm
rs_selfield TYPE slis_selfield.
case sy-ucomm.
WHEN '&DATA_SAVE'.
LOOP AT IT_DATA INTO WA WHERE ENDKZ = 'X'.
IF WA-ENDKZ = 'X'.
*******MODIFIED*********************************
U DELETE THIS CODE N USER UR INSERT CODE TO CHECK
SY-MSGV1 = WA-MBLNR. " U CAN DELETE
SY-MSGV2 = WA-MATNR. " U CAN DELETE
MESSAGE ID 'BC_BOR' TYPE 'I' NUMBER '888' " U CAN DELETE
WITH SY-MSGV1 SY-MSGV2. " U CAN DELETE
*******MODIFIED*********************************
INSERT ZTABLE.
ENDIF.
endloop.
ENDCASE.
ENDFORM. "user_command
this is my code, database will stored in fields only.data is empty,
how to slove that one,send any sugestion.
Hi Lakshmi,
Can u explain briefly what is ur requirement. U mean to say that after clicking the checkbox in data base table or Screen?
Regards,
Jayaram...
Similar Messages
-
How to stored data after clicking checkbox save in database table
TYPE-pools: slis.
tables:mkpf,mseg,mard,COWB_COMP.
TYPES: BEGIN OF tp_data,
mblnr LIKE mseg-mblnr,
matnr LIKE mseg-matnr,
werks LIKE mard-werks,
lgort LIKE mard-lgort,
lgpbe LIKE mard-lgpbe,
charg LIKE mseg-charg,
bwart LIKE mseg-bwart,
budat LIKE mkpf-budat,
menge LIKE mseg-menge,
meins LIKE mseg-meins,
kostl LIKE mseg-kostl,
aufnr LIKE mseg-aufnr,
rsnum LIKE mseg-rsnum,
endkz like COWB_COMP-endkz,
END OF tp_data,
tp_tbl_data TYPE STANDARD TABLE OF tp_data.
*data: t_data like ztable occurs 0 with header line.
Constants
Data objects (variable declarations and definitions)
Report data to be shown.
DATA: it_data TYPE STANDARD TABLE OF tp_data.
Heading of the report.
DATA: t_heading TYPE slis_t_listheader.
========================== Selection Screen ==========================
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
SELECT-OPTIONS:smblnr FOR mseg-mblnr MODIF ID m1,
smatnr FOR mseg-matnr MODIF ID m2,
swerks FOR mard-werks MODIF ID m3,
slgort FOR mard-lgort MODIF ID m4,
slgpbe FOR mard-lgpbe MODIF ID m5,
scharg FOR mseg-charg MODIF ID m6,
sbwart FOR mseg-bwart MODIF ID m7,
skostl FOR mseg-kostl MODIF ID m8,
saufnr FOR mseg-aufnr MODIF ID m9,
srsnum FOR mseg-rsnum MODIF ID m10.
SELECTION-SCREEN END OF BLOCK b1.
SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME TITLE text-002.
PARAMETERS:pre RADIOBUTTON GROUP radi USER-COMMAND ucomm DEFAULT 'X',
pse RADIOBUTTON GROUP radi,
bps RADIOBUTTON GROUP radi.
SELECTION-SCREEN END OF BLOCK b2.
SELECTION-SCREEN BEGIN OF BLOCK b3 WITH FRAME TITLE text-003.
PARAMETER:layout TYPE i.
SELECTION-SCREEN END OF BLOCK b3.
=========================== Event Blocks =============================
AT selection-SCREEN.
start-OF-selection.
PERFORM get_data USING it_data.
END-OF-selection.
PERFORM build_alv USING it_data t_heading.
=========================== Subroutines ==============================
*& Form get_data
Gets the information to be shown in the report.
FORM get_data USING t_data TYPE tp_tbl_data.
SELECT msegmblnr msegmatnr mardwerks mardlgort mardlgpbe msegcharg msegbwart mkpfbudat
msegmenge msegmeins msegkostl msegaufnr mseg~rsnum
INTO CORRESPONDING FIELDS OF TABLE t_data
FROM mseg
JOIN mard ON mardmatnr EQ msegmatnr
JOIN mkpf ON msegmblnr EQ mkpfmblnr
WHERE mseg~matnr IN smatnr.
ENDFORM. " get_data
*& Form build_alv
Builds and display the ALV Grid.
FORM build_alv USING t_data TYPE tp_tbl_data
t_heading TYPE slis_t_listheader.
ALV required data objects.
DATA: w_title TYPE lvc_title,
w_comm TYPE slis_formname,
w_status TYPE slis_formname,
x_layout TYPE slis_layout_alv,
t_event TYPE slis_t_event,
t_fieldcat TYPE slis_t_fieldcat_alv,
t_sort TYPE slis_t_sortinfo_alv.
REFRESH t_fieldcat.
REFRESH t_event.
REFRESH t_sort.
CLEAR x_layout.
CLEAR w_title.
Field Catalog
PERFORM set_fieldcat2 USING:
1 'MBLNR' 'MBLNR' 'MSEG' space space space space space space space space space space space space t_fieldcat ,
2 'MATNR' 'MATNR' 'MSEG' space space space space space space space space space space space space t_fieldcat ,
3 'WERKS' 'WERKS' 'MARD' space space space space space space space space space space space space t_fieldcat,
4 'LGORT' 'LGORT' 'MARD' space space space space space space space space space space space space t_fieldcat ,
5 'LGPBE' 'LGPBE' 'MARD' space space space space space space space space space space space space t_fieldcat ,
6 'CHARG' 'CHARG' 'MSEG' space space space space space space space space space space space space t_fieldcat ,
7 'BWART' 'BWART' 'MSEG' space space space space space space space space space space space space t_fieldcat,
8 'BUDAT' 'BUDAT' 'MKPF' space space space space space space space space space space space space t_fieldcat,
9 'MENGE' 'MENGE' 'MSEG' space space space space space space space space space space space space t_fieldcat,
10 'MEINS' 'MEINS' 'MSEG' space space space space space space space space space space space space t_fieldcat,
11 'KOSTL' 'KOSTL' 'MSEG' space space space space space space space space space space space space t_fieldcat,
12 'AUFNR' 'AUFNR' 'MSEG' space space space space space space space space space space space space t_fieldcat,
13 'RSNUM' 'RSNUM' 'MSEG' space space space space space space space space space space space space t_fieldcat,
14 'ENDKZ' 'ENDKZ' 'COWB_COMP' space space 'select' 'Select this row' 'Sel' 'Select this row' space space space 'X' 'X' space t_fieldcat.
Layout
x_layout-zebra = 'X'.
Top of page heading
PERFORM set_top_page_heading USING t_heading t_event.
Events
PERFORM set_events USING t_event.
GUI Status
w_status = ''.
User commands
w_comm = 'USER_COMMAND'.
Order
Example
PERFORM set_order USING '<field>' 'IT_DATA' 'X' space space t_sort.
PERFORM set_order USING 'MBLNR' 'IT_DATA' 'X' space 'X' t_sort.
PERFORM set_order USING 'EBELN' 'IT_DATA' 'X' space 'X' t_sort.
PERFORM set_order USING 'EBELP' 'IT_DATA' 'X' space space t_sort.
Displays the ALV grid
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_callback_program = sy-repid
it_fieldcat = t_fieldcat
is_layout = x_layout
it_sort = t_sort
i_callback_pf_status_set = w_status
i_callback_user_command = w_comm
i_save = 'X'
it_events = t_event
i_grid_title = w_title
TABLES
t_outtab = t_data
EXCEPTIONS
program_error = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM. " build_alv.
*& Form set_top_page_heading
Creates the report headings.
FORM set_top_page_heading USING t_heading TYPE slis_t_listheader
t_events TYPE slis_t_event.
DATA: x_heading TYPE slis_listheader,
x_event TYPE LINE OF slis_t_event.
Report title
CLEAR t_heading[].
CLEAR x_heading.
x_heading-typ = 'H'.
x_heading-info = 'Reporte Prueba'(001).
APPEND x_heading TO t_heading.
Program name
CLEAR x_heading.
x_heading-typ = 'S'.
x_heading-KEY = 'Program: '.
x_heading-info = sy-repid.
APPEND x_heading TO t_heading.
User who is running the report
CLEAR x_heading.
x_heading-typ = 'S'.
x_heading-KEY = 'User: '.
x_heading-info = sy-uname.
APPEND x_heading TO t_heading.
Date of execution
CLEAR x_heading.
x_heading-typ = 'S'.
x_heading-KEY = 'Date: '.
WRITE sy-datum TO x_heading-info.
APPEND x_heading TO t_heading.
Time of execution
CLEAR x_heading.
x_heading-typ = 'S'.
x_heading-KEY = 'Time: '.
WRITE sy-uzeit TO x_heading-info.
APPEND x_heading TO t_heading.
Top of page event
x_event-name = slis_ev_top_of_page.
x_event-FORM = 'TOP_OF_PAGE'.
APPEND x_event TO t_events.
ENDFORM.
*& Form set_events
Sets the events for ALV.
The TOP_OF_PAGE event is alredy being registered in
the set_top_page_heading subroutine.
FORM set_events USING t_events TYPE slis_t_event.
DATA: x_event TYPE LINE OF slis_t_event.
Example
clear x_event.
x_event-name = .
x_event-form = .
append x_event to t_event.
ENDFORM.
*& Form set_order
Adds an entry to the order table.
FORM set_order USING p_fieldname p_tabname p_up p_down p_subtot
t_sort TYPE slis_t_sortinfo_alv.
DATA: x_sort TYPE slis_sortinfo_alv.
CLEAR x_sort.
x_sort-fieldname = p_fieldname.
x_sort-tabname = p_tabname.
x_sort-UP = p_up.
x_sort-down = p_down.
x_sort-subtot = p_subtot.
APPEND x_sort TO t_sort.
ENDFORM. "set_order
*& Form set_fieldcat2
Adds an entry to the field catalog.
FORM set_fieldcat2 USING p_colpos p_fieldname p_ref_fieldname p_ref_tabname
p_outputlen p_noout
p_seltext_m p_seltext_l p_seltext_s p_reptext_ddic p_ddictxt
p_hotspot p_showasicon p_checkbox p_edit
p_dosum
t_fieldcat TYPE slis_t_fieldcat_alv.
DATA: wa_fieldcat TYPE slis_fieldcat_alv.
CLEAR wa_fieldcat.
General settings
wa_fieldcat-fieldname = p_fieldname.
wa_fieldcat-col_pos = p_colpos.
wa_fieldcat-no_out = p_noout.
wa_fieldcat-HOTSPOT = p_hotspot.
wa_fieldcat-CHECKBOX = p_checkbox.
wa_fieldcat-ICON = p_showasicon.
wa_fieldcat-do_sum = p_dosum.
Set reference fieldname, tablenam and rollname.
If p_ref_tabname is not given, the ref_fieldname given is a data element.
If p_ref_tabname is given, the ref_fieldname given is a field of a table. In case ref_fieldname is not given, it is copied from the fieldname.
IF p_ref_tabname IS INITIAL.
wa_fieldcat-rollname = p_ref_fieldname.
ELSE.
wa_fieldcat-ref_tabname = p_ref_tabname.
IF p_ref_fieldname EQ space.
wa_fieldcat-ref_fieldname = wa_fieldcat-fieldname.
ELSE.
wa_fieldcat-ref_fieldname = p_ref_fieldname.
ENDIF.
ENDIF.
Set output length.
IF NOT p_outputlen IS INITIAL.
wa_fieldcat-outputlen = p_outputlen.
ENDIF.
Set text headers.
IF NOT p_seltext_m IS INITIAL.
wa_fieldcat-seltext_m = p_seltext_m.
ENDIF.
IF NOT p_seltext_l IS INITIAL.
wa_fieldcat-seltext_l = p_seltext_l.
ENDIF.
IF NOT p_seltext_s IS INITIAL.
wa_fieldcat-seltext_s = p_seltext_s.
ENDIF.
IF NOT p_reptext_ddic IS INITIAL.
wa_fieldcat-reptext_ddic = p_reptext_ddic.
ENDIF.
IF NOT p_ddictxt IS INITIAL.
wa_fieldcat-ddictxt = p_ddictxt.
ENDIF.
Set as editable or not.
IF p_edit IS NOT INITIAL.
wa_fieldcat-INPUT = 'X'.
wa_fieldcat-EDIT = 'X'.
ENDIF.
APPEND wa_fieldcat TO t_fieldcat.
ENDFORM. "set_fieldcat2
=========================== Subroutines called by ALV ================
*& Form top_of_page
Called on top_of_page ALV event.
Prints the heading.
FORM top_of_page.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
i_logo = 'XXXXX'
it_list_commentary = t_heading.
ENDFORM. " alv_top_of_page
*& Form user_command
Called on user_command ALV event.
Executes custom commands.
FORM user_command USING r_ucomm LIKE sy-ucomm
rs_selfield TYPE slis_selfield.
ENDFORM. "user_command
this is my code, how to store data after clicking checkbox in databasetable,
how to write that cide.
plz send me code.hi!,
use MODIFY to update data into the data base table.
regards
anjali -
How to save data after clicking checkbox stored in databasetable
TYPE-pools: slis.
tables:mkpf,mseg,mard.
TYPES: BEGIN OF tp_data,
mblnr LIKE mseg-mblnr,
matnr LIKE mseg-matnr,
werks LIKE mard-werks,
lgort LIKE mard-lgort,
lgpbe LIKE mard-lgpbe,
charg LIKE mseg-charg,
bwart LIKE mseg-bwart,
budat LIKE mkpf-budat,
menge LIKE mseg-menge,
meins LIKE mseg-meins,
kostl LIKE mseg-kostl,
aufnr LIKE mseg-aufnr,
rsnum LIKE mseg-rsnum,
checkbox TYPE c,
__mark,
END OF tp_data,
tp_tbl_data TYPE STANDARD TABLE OF tp_data.
Constants
Data objects (variable declarations and definitions)
Report data to be shown.
DATA: it_data TYPE STANDARD TABLE OF tp_data.
Heading of the report.
DATA: t_heading TYPE slis_t_listheader.
========================== Selection Screen ==========================
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
SELECT-OPTIONS:smblnr FOR mseg-mblnr MODIF ID m1,
smatnr FOR mseg-matnr MODIF ID m2,
swerks FOR mard-werks MODIF ID m3,
slgort FOR mard-lgort MODIF ID m4,
slgpbe FOR mard-lgpbe MODIF ID m5,
scharg FOR mseg-charg MODIF ID m6,
sbwart FOR mseg-bwart MODIF ID m7,
skostl FOR mseg-kostl MODIF ID m8,
saufnr FOR mseg-aufnr MODIF ID m9,
srsnum FOR mseg-rsnum MODIF ID m10.
SELECTION-SCREEN END OF BLOCK b1.
SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME TITLE text-002.
PARAMETERS:pre RADIOBUTTON GROUP radi USER-COMMAND ucomm DEFAULT 'X',
pse RADIOBUTTON GROUP radi,
bps RADIOBUTTON GROUP radi.
SELECTION-SCREEN END OF BLOCK b2.
SELECTION-SCREEN BEGIN OF BLOCK b3 WITH FRAME TITLE text-003.
PARAMETER:layout TYPE i.
SELECTION-SCREEN END OF BLOCK b3.
=========================== Event Blocks =============================
AT selection-SCREEN.
start-OF-selection.
PERFORM get_data USING it_data.
END-OF-selection.
PERFORM build_alv USING it_data t_heading.
=========================== Subroutines ==============================
*& Form get_data
Gets the information to be shown in the report.
FORM get_data USING t_data TYPE tp_tbl_data.
SELECT msegmblnr msegmatnr mardwerks mardlgort mardlgpbe msegcharg msegbwart mkpfbudat
msegmenge msegmeins msegkostl msegaufnr mseg~rsnum
INTO CORRESPONDING FIELDS OF TABLE t_data
FROM mseg
JOIN mard ON mardmatnr EQ msegmatnr
JOIN mkpf ON msegmblnr EQ mkpfmblnr
WHERE mseg~matnr IN smatnr.
ENDFORM. " get_data
*& Form build_alv
Builds and display the ALV Grid.
FORM build_alv USING t_data TYPE tp_tbl_data
t_heading TYPE slis_t_listheader.
ALV required data objects.
DATA: w_title TYPE lvc_title,
w_comm TYPE slis_formname,
w_status TYPE slis_formname,
x_layout TYPE slis_layout_alv,
t_event TYPE slis_t_event,
t_fieldcat TYPE slis_t_fieldcat_alv,
t_sort TYPE slis_t_sortinfo_alv.
REFRESH t_fieldcat.
REFRESH t_event.
REFRESH t_sort.
CLEAR x_layout.
CLEAR w_title.
Field Catalog
PERFORM set_fieldcat2 USING:
1 'MBLNR' 'MBLNR' 'MSEG' space space space space space space space space space space space space t_fieldcat ,
2 'MATNR' 'MATNR' 'MSEG' space space space space space space space space space space space space t_fieldcat ,
3 'WERKS' 'WERKS' 'MARD' space space space space space space space space space space space space t_fieldcat,
4 'LGORT' 'LGORT' 'MARD' space space space space space space space space space space space space t_fieldcat ,
5 'LGPBE' 'LGPBE' 'MARD' space space space space space space space space space space space space t_fieldcat ,
6 'CHARG' 'CHARG' 'MSEG' space space space space space space space space space space space space t_fieldcat ,
7 'BWART' 'BWART' 'MSEG' space space space space space space space space space space space space t_fieldcat,
8 'BUDAT' 'BUDAT' 'MKPF' space space space space space space space space space space space space t_fieldcat,
9 'MENGE' 'MENGE' 'MSEG' space space space space space space space space space space space space t_fieldcat,
10 'MEINS' 'MEINS' 'MSEG' space space space space space space space space space space space space t_fieldcat,
11 'KOSTL' 'KOSTL' 'MSEG' space space space space space space space space space space space space t_fieldcat,
12 'AUFNR' 'AUFNR' 'MSEG' space space space space space space space space space space space space t_fieldcat,
13 'RSNUM' 'RSNUM' 'MSEG' space space space space space space space space space space space space t_fieldcat,
14 '__MARK' 'XFELD' space space space 'Select' 'Select this row' 'Sel' 'Select this row' space space space 'X' 'X' space t_fieldcat.
Layout
x_layout-zebra = 'X'.
Top of page heading
PERFORM set_top_page_heading USING t_heading t_event.
Events
PERFORM set_events USING t_event.
GUI Status
w_status = ''.
User commands
w_comm = 'USER_COMMAND'.
Order
Example
PERFORM set_order USING '<field>' 'IT_DATA' 'X' space space t_sort.
PERFORM set_order USING 'LIFNR' 'IT_DATA' 'X' space 'X' t_sort.
PERFORM set_order USING 'EBELN' 'IT_DATA' 'X' space 'X' t_sort.
PERFORM set_order USING 'EBELP' 'IT_DATA' 'X' space space t_sort.
Displays the ALV grid
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_callback_program = sy-repid
it_fieldcat = t_fieldcat
is_layout = x_layout
it_sort = t_sort
i_callback_pf_status_set = w_status
i_callback_user_command = w_comm
i_save = 'X'
it_events = t_event
i_grid_title = w_title
TABLES
t_outtab = t_data
EXCEPTIONS
program_error = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM. " build_alv.
*& Form set_top_page_heading
Creates the report headings.
FORM set_top_page_heading USING t_heading TYPE slis_t_listheader
t_events TYPE slis_t_event.
DATA: x_heading TYPE slis_listheader,
x_event TYPE LINE OF slis_t_event.
Report title
CLEAR t_heading[].
CLEAR x_heading.
x_heading-typ = 'H'.
x_heading-info = 'Reporte Prueba'(001).
APPEND x_heading TO t_heading.
Program name
CLEAR x_heading.
x_heading-typ = 'S'.
x_heading-KEY = 'Program: '.
x_heading-info = sy-repid.
APPEND x_heading TO t_heading.
User who is running the report
CLEAR x_heading.
x_heading-typ = 'S'.
x_heading-KEY = 'User: '.
x_heading-info = sy-uname.
APPEND x_heading TO t_heading.
Date of execution
CLEAR x_heading.
x_heading-typ = 'S'.
x_heading-KEY = 'Date: '.
WRITE sy-datum TO x_heading-info.
APPEND x_heading TO t_heading.
Time of execution
CLEAR x_heading.
x_heading-typ = 'S'.
x_heading-KEY = 'Time: '.
WRITE sy-uzeit TO x_heading-info.
APPEND x_heading TO t_heading.
Top of page event
x_event-name = slis_ev_top_of_page.
x_event-FORM = 'TOP_OF_PAGE'.
APPEND x_event TO t_events.
ENDFORM.
*& Form set_events
Sets the events for ALV.
The TOP_OF_PAGE event is alredy being registered in
the set_top_page_heading subroutine.
FORM set_events USING t_events TYPE slis_t_event.
DATA: x_event TYPE LINE OF slis_t_event.
Example
clear x_event.
x_event-name = .
x_event-form = .
append x_event to t_event.
ENDFORM.
*& Form set_order
Adds an entry to the order table.
FORM set_order USING p_fieldname p_tabname p_up p_down p_subtot
t_sort TYPE slis_t_sortinfo_alv.
DATA: x_sort TYPE slis_sortinfo_alv.
CLEAR x_sort.
x_sort-fieldname = p_fieldname.
x_sort-tabname = p_tabname.
x_sort-UP = p_up.
x_sort-down = p_down.
x_sort-subtot = p_subtot.
APPEND x_sort TO t_sort.
ENDFORM. "set_order
*& Form set_fieldcat2
Adds an entry to the field catalog.
FORM set_fieldcat2 USING p_colpos p_fieldname p_ref_fieldname p_ref_tabname
p_outputlen p_noout
p_seltext_m p_seltext_l p_seltext_s p_reptext_ddic p_ddictxt
p_hotspot p_showasicon p_checkbox p_edit
p_dosum
t_fieldcat TYPE slis_t_fieldcat_alv.
DATA: wa_fieldcat TYPE slis_fieldcat_alv.
CLEAR wa_fieldcat.
General settings
wa_fieldcat-fieldname = p_fieldname.
wa_fieldcat-col_pos = p_colpos.
wa_fieldcat-no_out = p_noout.
wa_fieldcat-HOTSPOT = p_hotspot.
wa_fieldcat-CHECKBOX = p_checkbox.
wa_fieldcat-ICON = p_showasicon.
wa_fieldcat-do_sum = p_dosum.
Set reference fieldname, tablenam and rollname.
If p_ref_tabname is not given, the ref_fieldname given is a data element.
If p_ref_tabname is given, the ref_fieldname given is a field of a table. In case ref_fieldname is not given, it is copied from the fieldname.
IF p_ref_tabname IS INITIAL.
wa_fieldcat-rollname = p_ref_fieldname.
ELSE.
wa_fieldcat-ref_tabname = p_ref_tabname.
IF p_ref_fieldname EQ space.
wa_fieldcat-ref_fieldname = wa_fieldcat-fieldname.
ELSE.
wa_fieldcat-ref_fieldname = p_ref_fieldname.
ENDIF.
ENDIF.
Set output length.
IF NOT p_outputlen IS INITIAL.
wa_fieldcat-outputlen = p_outputlen.
ENDIF.
Set text headers.
IF NOT p_seltext_m IS INITIAL.
wa_fieldcat-seltext_m = p_seltext_m.
ENDIF.
IF NOT p_seltext_l IS INITIAL.
wa_fieldcat-seltext_l = p_seltext_l.
ENDIF.
IF NOT p_seltext_s IS INITIAL.
wa_fieldcat-seltext_s = p_seltext_s.
ENDIF.
IF NOT p_reptext_ddic IS INITIAL.
wa_fieldcat-reptext_ddic = p_reptext_ddic.
ENDIF.
IF NOT p_ddictxt IS INITIAL.
wa_fieldcat-ddictxt = p_ddictxt.
ENDIF.
Set as editable or not.
IF p_edit IS NOT INITIAL.
wa_fieldcat-INPUT = 'X'.
wa_fieldcat-EDIT = 'X'.
ENDIF.
APPEND wa_fieldcat TO t_fieldcat.
ENDFORM. "set_fieldcat2
=========================== Subroutines called by ALV ================
*& Form top_of_page
Called on top_of_page ALV event.
Prints the heading.
FORM top_of_page.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
i_logo = 'XXXXX'
it_list_commentary = t_heading.
ENDFORM. " alv_top_of_page
*& Form user_command
Called on user_command ALV event.
Executes custom commands.
FORM user_command USING r_ucomm LIKE sy-ucomm
rs_selfield TYPE slis_selfield.
Example Code
Executes a command considering the sy-ucomm.
CASE r_ucomm.
WHEN '&IC1'.
Set your "double click action" response here.
Example code: Create and display a status message.
DATA: w_msg TYPE string,
w_row(4) TYPE n.
w_row = rs_selfield-tabindex.
CONCATENATE 'You have clicked row' w_row
'field' rs_s lfield-fieldname
'with value' rs_selfield-value
INTO w_msg SEPARATED BY space.
MESSAGE w_msg TYPE 'S'.
ENDCASE.
End of example code.
ENDFORM. "user_command
this is mycode,mblnr, matnr and checkbox both field had created in database table
then save data after clicking checkbox data stored in database table,and next clickin checkboxes are no change. this my requirment.
plz send me code .Try this
In user_command form...
LOOP AT IT_DATA.
IF CHECKBOX __MARK EQ 'X'.
write logic wht u want....
ENDIF.
ENDLOOP. -
How to save data after clicking checkbox stored in database table
TYPE-pools: slis.
tables:mkpf,mseg,mard.
TYPES: BEGIN OF tp_data,
mblnr LIKE mseg-mblnr,
matnr LIKE mseg-matnr,
werks LIKE mard-werks,
lgort LIKE mard-lgort,
lgpbe LIKE mard-lgpbe,
charg LIKE mseg-charg,
bwart LIKE mseg-bwart,
budat LIKE mkpf-budat,
menge LIKE mseg-menge,
meins LIKE mseg-meins,
kostl LIKE mseg-kostl,
aufnr LIKE mseg-aufnr,
rsnum LIKE mseg-rsnum,
checkbox TYPE c,
__mark,
END OF tp_data,
tp_tbl_data TYPE STANDARD TABLE OF tp_data.
Constants
Data objects (variable declarations and definitions)
Report data to be shown.
DATA: it_data TYPE STANDARD TABLE OF tp_data.
Heading of the report.
DATA: t_heading TYPE slis_t_listheader.
========================== Selection Screen ==========================
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
SELECT-OPTIONS:smblnr FOR mseg-mblnr MODIF ID m1,
smatnr FOR mseg-matnr MODIF ID m2,
swerks FOR mard-werks MODIF ID m3,
slgort FOR mard-lgort MODIF ID m4,
slgpbe FOR mard-lgpbe MODIF ID m5,
scharg FOR mseg-charg MODIF ID m6,
sbwart FOR mseg-bwart MODIF ID m7,
skostl FOR mseg-kostl MODIF ID m8,
saufnr FOR mseg-aufnr MODIF ID m9,
srsnum FOR mseg-rsnum MODIF ID m10.
SELECTION-SCREEN END OF BLOCK b1.
SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME TITLE text-002.
PARAMETERS:pre RADIOBUTTON GROUP radi USER-COMMAND ucomm DEFAULT 'X',
pse RADIOBUTTON GROUP radi,
bps RADIOBUTTON GROUP radi.
SELECTION-SCREEN END OF BLOCK b2.
SELECTION-SCREEN BEGIN OF BLOCK b3 WITH FRAME TITLE text-003.
PARAMETER:layout TYPE i.
SELECTION-SCREEN END OF BLOCK b3.
=========================== Event Blocks =============================
AT selection-SCREEN.
start-OF-selection.
PERFORM get_data USING it_data.
END-OF-selection.
PERFORM build_alv USING it_data t_heading.
=========================== Subroutines ==============================
*& Form get_data
Gets the information to be shown in the report.
FORM get_data USING t_data TYPE tp_tbl_data.
SELECT msegmblnr msegmatnr mardwerks mardlgort mardlgpbe msegcharg msegbwart mkpfbudat
msegmenge msegmeins msegkostl msegaufnr mseg~rsnum
INTO CORRESPONDING FIELDS OF TABLE t_data
FROM mseg
JOIN mard ON mardmatnr EQ msegmatnr
JOIN mkpf ON msegmblnr EQ mkpfmblnr
WHERE mseg~matnr IN smatnr.
ENDFORM. " get_data
*& Form build_alv
Builds and display the ALV Grid.
FORM build_alv USING t_data TYPE tp_tbl_data
t_heading TYPE slis_t_listheader.
ALV required data objects.
DATA: w_title TYPE lvc_title,
w_comm TYPE slis_formname,
w_status TYPE slis_formname,
x_layout TYPE slis_layout_alv,
t_event TYPE slis_t_event,
t_fieldcat TYPE slis_t_fieldcat_alv,
t_sort TYPE slis_t_sortinfo_alv.
REFRESH t_fieldcat.
REFRESH t_event.
REFRESH t_sort.
CLEAR x_layout.
CLEAR w_title.
Field Catalog
PERFORM set_fieldcat2 USING:
1 'MBLNR' 'MBLNR' 'MSEG' space space space space space space space space space space space space t_fieldcat ,
2 'MATNR' 'MATNR' 'MSEG' space space space space space space space space space space space space t_fieldcat ,
3 'WERKS' 'WERKS' 'MARD' space space space space space space space space space space space space t_fieldcat,
4 'LGORT' 'LGORT' 'MARD' space space space space space space space space space space space space t_fieldcat ,
5 'LGPBE' 'LGPBE' 'MARD' space space space space space space space space space space space space t_fieldcat ,
6 'CHARG' 'CHARG' 'MSEG' space space space space space space space space space space space space t_fieldcat ,
7 'BWART' 'BWART' 'MSEG' space space space space space space space space space space space space t_fieldcat,
8 'BUDAT' 'BUDAT' 'MKPF' space space space space space space space space space space space space t_fieldcat,
9 'MENGE' 'MENGE' 'MSEG' space space space space space space space space space space space space t_fieldcat,
10 'MEINS' 'MEINS' 'MSEG' space space space space space space space space space space space space t_fieldcat,
11 'KOSTL' 'KOSTL' 'MSEG' space space space space space space space space space space space space t_fieldcat,
12 'AUFNR' 'AUFNR' 'MSEG' space space space space space space space space space space space space t_fieldcat,
13 'RSNUM' 'RSNUM' 'MSEG' space space space space space space space space space space space space t_fieldcat,
14 '__MARK' 'XFELD' space space space 'Select' 'Select this row' 'Sel' 'Select this row' space space space 'X' 'X' space t_fieldcat.
Layout
x_layout-zebra = 'X'.
Top of page heading
PERFORM set_top_page_heading USING t_heading t_event.
Events
PERFORM set_events USING t_event.
GUI Status
w_status = ''.
User commands
w_comm = 'USER_COMMAND'.
Order
Example
PERFORM set_order USING '<field>' 'IT_DATA' 'X' space space t_sort.
PERFORM set_order USING 'LIFNR' 'IT_DATA' 'X' space 'X' t_sort.
PERFORM set_order USING 'EBELN' 'IT_DATA' 'X' space 'X' t_sort.
PERFORM set_order USING 'EBELP' 'IT_DATA' 'X' space space t_sort.
Displays the ALV grid
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_callback_program = sy-repid
it_fieldcat = t_fieldcat
is_layout = x_layout
it_sort = t_sort
i_callback_pf_status_set = w_status
i_callback_user_command = w_comm
i_save = 'X'
it_events = t_event
i_grid_title = w_title
TABLES
t_outtab = t_data
EXCEPTIONS
program_error = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM. " build_alv.
*& Form set_top_page_heading
Creates the report headings.
FORM set_top_page_heading USING t_heading TYPE slis_t_listheader
t_events TYPE slis_t_event.
DATA: x_heading TYPE slis_listheader,
x_event TYPE LINE OF slis_t_event.
Report title
CLEAR t_heading[].
CLEAR x_heading.
x_heading-typ = 'H'.
x_heading-info = 'Reporte Prueba'(001).
APPEND x_heading TO t_heading.
Program name
CLEAR x_heading.
x_heading-typ = 'S'.
x_heading-KEY = 'Program: '.
x_heading-info = sy-repid.
APPEND x_heading TO t_heading.
User who is running the report
CLEAR x_heading.
x_heading-typ = 'S'.
x_heading-KEY = 'User: '.
x_heading-info = sy-uname.
APPEND x_heading TO t_heading.
Date of execution
CLEAR x_heading.
x_heading-typ = 'S'.
x_heading-KEY = 'Date: '.
WRITE sy-datum TO x_heading-info.
APPEND x_heading TO t_heading.
Time of execution
CLEAR x_heading.
x_heading-typ = 'S'.
x_heading-KEY = 'Time: '.
WRITE sy-uzeit TO x_heading-info.
APPEND x_heading TO t_heading.
Top of page event
x_event-name = slis_ev_top_of_page.
x_event-FORM = 'TOP_OF_PAGE'.
APPEND x_event TO t_events.
ENDFORM.
*& Form set_events
Sets the events for ALV.
The TOP_OF_PAGE event is alredy being registered in
the set_top_page_heading subroutine.
FORM set_events USING t_events TYPE slis_t_event.
DATA: x_event TYPE LINE OF slis_t_event.
Example
clear x_event.
x_event-name = .
x_event-form = .
append x_event to t_event.
ENDFORM.
*& Form set_order
Adds an entry to the order table.
FORM set_order USING p_fieldname p_tabname p_up p_down p_subtot
t_sort TYPE slis_t_sortinfo_alv.
DATA: x_sort TYPE slis_sortinfo_alv.
CLEAR x_sort.
x_sort-fieldname = p_fieldname.
x_sort-tabname = p_tabname.
x_sort-UP = p_up.
x_sort-down = p_down.
x_sort-subtot = p_subtot.
APPEND x_sort TO t_sort.
ENDFORM. "set_order
*& Form set_fieldcat2
Adds an entry to the field catalog.
FORM set_fieldcat2 USING p_colpos p_fieldname p_ref_fieldname p_ref_tabname
p_outputlen p_noout
p_seltext_m p_seltext_l p_seltext_s p_reptext_ddic p_ddictxt
p_hotspot p_showasicon p_checkbox p_edit
p_dosum
t_fieldcat TYPE slis_t_fieldcat_alv.
DATA: wa_fieldcat TYPE slis_fieldcat_alv.
CLEAR wa_fieldcat.
General settings
wa_fieldcat-fieldname = p_fieldname.
wa_fieldcat-col_pos = p_colpos.
wa_fieldcat-no_out = p_noout.
wa_fieldcat-HOTSPOT = p_hotspot.
wa_fieldcat-CHECKBOX = p_checkbox.
wa_fieldcat-ICON = p_showasicon.
wa_fieldcat-do_sum = p_dosum.
Set reference fieldname, tablenam and rollname.
If p_ref_tabname is not given, the ref_fieldname given is a data element.
If p_ref_tabname is given, the ref_fieldname given is a field of a table. In case ref_fieldname is not given, it is copied from the fieldname.
IF p_ref_tabname IS INITIAL.
wa_fieldcat-rollname = p_ref_fieldname.
ELSE.
wa_fieldcat-ref_tabname = p_ref_tabname.
IF p_ref_fieldname EQ space.
wa_fieldcat-ref_fieldname = wa_fieldcat-fieldname.
ELSE.
wa_fieldcat-ref_fieldname = p_ref_fieldname.
ENDIF.
ENDIF.
Set output length.
IF NOT p_outputlen IS INITIAL.
wa_fieldcat-outputlen = p_outputlen.
ENDIF.
Set text headers.
IF NOT p_seltext_m IS INITIAL.
wa_fieldcat-seltext_m = p_seltext_m.
ENDIF.
IF NOT p_seltext_l IS INITIAL.
wa_fieldcat-seltext_l = p_seltext_l.
ENDIF.
IF NOT p_seltext_s IS INITIAL.
wa_fieldcat-seltext_s = p_seltext_s.
ENDIF.
IF NOT p_reptext_ddic IS INITIAL.
wa_fieldcat-reptext_ddic = p_reptext_ddic.
ENDIF.
IF NOT p_ddictxt IS INITIAL.
wa_fieldcat-ddictxt = p_ddictxt.
ENDIF.
Set as editable or not.
IF p_edit IS NOT INITIAL.
wa_fieldcat-INPUT = 'X'.
wa_fieldcat-EDIT = 'X'.
ENDIF.
APPEND wa_fieldcat TO t_fieldcat.
ENDFORM. "set_fieldcat2
=========================== Subroutines called by ALV ================
*& Form top_of_page
Called on top_of_page ALV event.
Prints the heading.
FORM top_of_page.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
i_logo = 'XXXXX'
it_list_commentary = t_heading.
ENDFORM. " alv_top_of_page
*& Form user_command
Called on user_command ALV event.
Executes custom commands.
FORM user_command USING r_ucomm LIKE sy-ucomm
rs_selfield TYPE slis_selfield.
Example Code
Executes a command considering the sy-ucomm.
CASE r_ucomm.
WHEN '&IC1'.
Set your "double click action" response here.
Example code: Create and display a status message.
DATA: w_msg TYPE string,
w_row(4) TYPE n.
w_row = rs_selfield-tabindex.
CONCATENATE 'You have clicked row' w_row
'field' rs_s lfield-fieldname
'with value' rs_selfield-value
INTO w_msg SEPARATED BY space.
MESSAGE w_msg TYPE 'S'.
ENDCASE.
End of example code.
LOOP AT T_DATA.
IF it_data-__MARK EQ 'X'.
insert ztable.
ENDIF.
ENDLOOP.
ENDFORM. "user_command
ur sending code loop is error ,plz check that one after checking send meHi,
After displaying ALV report output, if you want to update database table based on your selected record, then use the below logic in your User_command subroutine.
You will get the index of the selected record in rs_selfield-tabindex. using this index read the respective record from the internal table and move corresponding field to the table fields and then update.
data : wa_data like t_data.
read table t_data index rs_selfield-tabindex into wa_data.
if sy-subrc = 0.
move-corresponding wa_data to ztable.
insert ztable.
endif.
thanks,
sksingh -
How to stored data after clicking checkbox save in data base table
REPORT zreport .
TABLES:mseg,mard,mkpf.
TYPE-POOLS:slis.
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
SELECT-OPTIONS:smblnr FOR mseg-mblnr MODIF ID m1,
smatnr FOR mseg-matnr MODIF ID m2,
swerks FOR mard-werks MODIF ID m3,
slgort FOR mard-lgort MODIF ID m4,
slgpbe FOR mard-lgpbe MODIF ID m5,
scharg FOR mseg-charg MODIF ID m6,
sbwart FOR mseg-bwart MODIF ID m7,
skostl FOR mseg-kostl MODIF ID m8,
saufnr FOR mseg-aufnr MODIF ID m9,
srsnum FOR mseg-rsnum MODIF ID m10.
SELECTION-SCREEN END OF BLOCK b1.
SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME TITLE text-002.
PARAMETERS:pre RADIOBUTTON GROUP radi USER-COMMAND ucomm DEFAULT 'X',
pse RADIOBUTTON GROUP radi,
bps RADIOBUTTON GROUP radi.
SELECTION-SCREEN END OF BLOCK b2.
SELECTION-SCREEN BEGIN OF BLOCK b3 WITH FRAME TITLE text-003.
PARAMETER:layout TYPE i.
SELECTION-SCREEN END OF BLOCK b3.
DATA:BEGIN OF itab OCCURS 0,
mblnr LIKE mseg-mblnr,
matnr LIKE mseg-matnr,
werks LIKE mard-werks,
lgort LIKE mard-lgort,
lgpbe LIKE mard-lgpbe,
charg LIKE mseg-charg,
bwart LIKE mseg-bwart,
budat LIKE mkpf-budat,
menge LIKE mseg-menge,
meins LIKE mseg-meins,
kostl LIKE mseg-kostl,
aufnr LIKE mseg-aufnr,
rsnum LIKE mseg-rsnum,
checkbox TYPE c,
END OF itab.
DATA: gt_fieldcat TYPE slis_t_fieldcat_alv,
gw_fieldcat TYPE slis_fieldcat_alv,
gt_layout TYPE slis_layout_alv.
START-OF-SELECTION.
SELECT msegmblnr msegmatnr mardwerks mardlgort mardlgpbe msegcharg msegbwart mkpfbudat
msegmenge msegmeins msegkostl msegaufnr mseg~rsnum
INTO TABLE itab FROM
mseg JOIN mard ON mardmatnr EQ msegmatnr
JOIN mkpf ON msegmblnr EQ mkpfmblnr
WHERE mseg~matnr IN smatnr.
IF sy-subrc EQ 0.
SORT itab BY matnr.
PERFORM display_alv_output.
ENDIF.
*& Form display_alv_output
text
--> p1 text
<-- p2 text
FORM display_alv_output.
REFRESH gt_fieldcat.
gw_fieldcat-fieldname = 'MBLNR'.
gw_fieldcat-tabname = 'itab'.
gw_fieldcat-col_pos = 1.
gw_fieldcat-seltext_m = 'material document'.
gw_fieldcat-key = 'x'.
APPEND gw_fieldcat TO gt_fieldcat.
CLEAR gw_fieldcat.
gw_fieldcat-fieldname = 'MATNR'.
gw_fieldcat-tabname = 'itab'.
gw_fieldcat-col_pos = 2.
gw_fieldcat-seltext_m = 'material'.
gw_fieldcat-key = ' '.
APPEND gw_fieldcat TO gt_fieldcat.
CLEAR gw_fieldcat.
gw_fieldcat-fieldname = 'WERKS'.
gw_fieldcat-tabname = 'itab'.
gw_fieldcat-col_pos = 3.
gw_fieldcat-seltext_m = 'plant'.
gw_fieldcat-key = ' '.
APPEND gw_fieldcat TO gt_fieldcat.
CLEAR gw_fieldcat.
gw_fieldcat-fieldname = 'LGORT'.
gw_fieldcat-tabname = 'itab'.
gw_fieldcat-col_pos = 4.
gw_fieldcat-seltext_m = 'storage location'.
gw_fieldcat-key = ' '.
APPEND gw_fieldcat TO gt_fieldcat.
CLEAR gw_fieldcat.
gw_fieldcat-fieldname = 'LGPBE'.
gw_fieldcat-tabname = 'itab'.
gw_fieldcat-col_pos = 5.
gw_fieldcat-seltext_m = 'storage bin'.
gw_fieldcat-key = ' '.
APPEND gw_fieldcat TO gt_fieldcat.
CLEAR gw_fieldcat.
gw_fieldcat-fieldname = 'CHARG'.
gw_fieldcat-tabname = 'itab'.
gw_fieldcat-col_pos = 6.
gw_fieldcat-seltext_m = 'Batch number'.
gw_fieldcat-key = ' '.
APPEND gw_fieldcat TO gt_fieldcat.
CLEAR gw_fieldcat.
gw_fieldcat-fieldname = 'BWART'.
gw_fieldcat-tabname = 'itab'.
gw_fieldcat-col_pos = 7.
gw_fieldcat-seltext_m = 'Movement Type (Inventory Management)'.
gw_fieldcat-key = ' '.
APPEND gw_fieldcat TO gt_fieldcat.
CLEAR gw_fieldcat.
gw_fieldcat-fieldname = 'BUDAT'.
gw_fieldcat-tabname = 'itab'.
gw_fieldcat-col_pos = 8.
gw_fieldcat-seltext_m = 'Posting Date in the Document'.
gw_fieldcat-key = ' '.
APPEND gw_fieldcat TO gt_fieldcat.
CLEAR gw_fieldcat.
gw_fieldcat-fieldname = 'MENGE'.
gw_fieldcat-tabname = 'itab'.
gw_fieldcat-col_pos = 9.
gw_fieldcat-seltext_m = 'QUANTITY'.
gw_fieldcat-key = ' '.
APPEND gw_fieldcat TO gt_fieldcat.
CLEAR gw_fieldcat.
gw_fieldcat-fieldname = 'MEINS'.
gw_fieldcat-tabname = 'itab'.
gw_fieldcat-col_pos = 10.
gw_fieldcat-seltext_m = 'Basic unit of measure'.
gw_fieldcat-key = ' '.
APPEND gw_fieldcat TO gt_fieldcat.
CLEAR gw_fieldcat.
gw_fieldcat-fieldname = 'KOSTL'.
gw_fieldcat-tabname = 'itab'.
gw_fieldcat-col_pos = 11.
gw_fieldcat-seltext_m = 'Cost center'.
gw_fieldcat-key = ' '.
APPEND gw_fieldcat TO gt_fieldcat.
CLEAR gw_fieldcat.
gw_fieldcat-fieldname = 'AUFNR'.
gw_fieldcat-tabname = 'itab'.
gw_fieldcat-col_pos = 12.
gw_fieldcat-seltext_m = 'Order Number'.
gw_fieldcat-key = ' '.
APPEND gw_fieldcat TO gt_fieldcat.
CLEAR gw_fieldcat.
gw_fieldcat-fieldname = 'RSNUM'.
gw_fieldcat-tabname = 'itab'.
gw_fieldcat-col_pos = 13.
gw_fieldcat-seltext_m = 'Number of Reservation / Depe'.
gw_fieldcat-key = ' '.
APPEND gw_fieldcat TO gt_fieldcat.
CLEAR gw_fieldcat.
gw_fieldcat-col_pos = 14.
gw_fieldcat-fieldname = 'CHECKBOX'.
gw_fieldcat-seltext_m = 'Compltd'.
gw_fieldcat-checkbox = 'X'.
gw_fieldcat-edit = 'X'.
APPEND gw_fieldcat TO gt_fieldcat.
CLEAR gw_fieldcat.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = 'ZREPORT'
I_CALLBACK_PF_STATUS_SET = 'PF_STATUS'
I_CALLBACK_USER_COMMAND = 'USER_COMMAND'
IS_LAYOUT = gt_layout
IT_FIELDCAT = gt_fieldcat
TABLES
t_outtab = itab
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2.
ENDFORM. " display_alv_output
FORM USER_COMMAND USING P_UCOMM TYPE SY-UCOMM
P_SELFLD TYPE SLIS_SELFIELD.
set pf-stATUS 'YSTATUS'.
case p_ucomm.
when 'SAVE'.
Data ref1 type ref to cl_gui_alv_grid.
CALL FUNCTION 'GET_GLOBALS_FROM_SLVC_FULLSCR'
IMPORTING
E_GRID = ref1.
call method ref1->check_changed_data.
Here you wil have the table with updated data
itab2[] = itab[].
delete itab where checkbox = space. "Mark is the field for the checkbox
modify ztable from table itab.
endcase.
ENDFORM.
use loop dump error is came.
another solutions plz send me
this is mycode.Hi Lakshmi,
You please give me some more information related to your problem instead of pasting the total code here
Warm Regards,
Vijay -
How tostored data after clicking checkbox save in data base table
REPORT zreport .
TABLES:mseg,mard,mkpf.
TYPE-POOLS:slis.
DATA:BEGIN OF itab OCCURS 0,
mblnr LIKE mseg-mblnr,
matnr LIKE mseg-matnr,
werks LIKE mard-werks,
lgort LIKE mard-lgort,
lgpbe LIKE mard-lgpbe,
charg LIKE mseg-charg,
bwart LIKE mseg-bwart,
budat LIKE mkpf-budat,
menge LIKE mseg-menge,
meins LIKE mseg-meins,
kostl LIKE mseg-kostl,
aufnr LIKE mseg-aufnr,
rsnum LIKE mseg-rsnum,
checkbox TYPE c,
END OF itab.
data: itab2 like standard table of ztable with header line.
DATA: gt_fieldcat TYPE slis_t_fieldcat_alv,
gw_fieldcat TYPE slis_fieldcat_alv,
gt_layout TYPE slis_layout_alv.
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
SELECT-OPTIONS:smblnr FOR mseg-mblnr MODIF ID m1,
smatnr FOR mseg-matnr MODIF ID m2,
swerks FOR mard-werks MODIF ID m3,
slgort FOR mard-lgort MODIF ID m4,
slgpbe FOR mard-lgpbe MODIF ID m5,
scharg FOR mseg-charg MODIF ID m6,
sbwart FOR mseg-bwart MODIF ID m7,
skostl FOR mseg-kostl MODIF ID m8,
saufnr FOR mseg-aufnr MODIF ID m9,
srsnum FOR mseg-rsnum MODIF ID m10.
SELECTION-SCREEN END OF BLOCK b1.
SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME TITLE text-002.
PARAMETERS:pre RADIOBUTTON GROUP radi USER-COMMAND ucomm DEFAULT 'X',
pse RADIOBUTTON GROUP radi,
bps RADIOBUTTON GROUP radi.
SELECTION-SCREEN END OF BLOCK b2.
SELECTION-SCREEN BEGIN OF BLOCK b3 WITH FRAME TITLE text-003.
PARAMETER:layout TYPE i.
SELECTION-SCREEN END OF BLOCK b3.
START-OF-SELECTION.
SELECT msegmblnr msegmatnr mardwerks mardlgort mardlgpbe msegcharg msegbwart mkpfbudat
msegmenge msegmeins msegkostl msegaufnr mseg~rsnum
INTO TABLE itab FROM
mseg JOIN mard ON mardmatnr EQ msegmatnr
JOIN mkpf ON msegmblnr EQ mkpfmblnr
WHERE mseg~matnr IN smatnr.
IF sy-subrc EQ 0.
SORT itab BY matnr.
PERFORM display_alv_output.
ENDIF.
*& Form display_alv_output
text
--> p1 text
<-- p2 text
FORM display_alv_output.
REFRESH gt_fieldcat.
gw_fieldcat-fieldname = 'MBLNR'.
gw_fieldcat-tabname = 'itab'.
gw_fieldcat-col_pos = 1.
gw_fieldcat-seltext_m = 'material document'.
gw_fieldcat-key = 'x'.
APPEND gw_fieldcat TO gt_fieldcat.
CLEAR gw_fieldcat.
gw_fieldcat-fieldname = 'MATNR'.
gw_fieldcat-tabname = 'itab'.
gw_fieldcat-col_pos = 2.
gw_fieldcat-seltext_m = 'material'.
gw_fieldcat-key = ' '.
APPEND gw_fieldcat TO gt_fieldcat.
CLEAR gw_fieldcat.
gw_fieldcat-fieldname = 'WERKS'.
gw_fieldcat-tabname = 'itab'.
gw_fieldcat-col_pos = 3.
gw_fieldcat-seltext_m = 'plant'.
gw_fieldcat-key = ' '.
APPEND gw_fieldcat TO gt_fieldcat.
CLEAR gw_fieldcat.
gw_fieldcat-fieldname = 'LGORT'.
gw_fieldcat-tabname = 'itab'.
gw_fieldcat-col_pos = 4.
gw_fieldcat-seltext_m = 'storage location'.
gw_fieldcat-key = ' '.
APPEND gw_fieldcat TO gt_fieldcat.
CLEAR gw_fieldcat.
gw_fieldcat-fieldname = 'LGPBE'.
gw_fieldcat-tabname = 'itab'.
gw_fieldcat-col_pos = 5.
gw_fieldcat-seltext_m = 'storage bin'.
gw_fieldcat-key = ' '.
APPEND gw_fieldcat TO gt_fieldcat.
CLEAR gw_fieldcat.
gw_fieldcat-fieldname = 'CHARG'.
gw_fieldcat-tabname = 'itab'.
gw_fieldcat-col_pos = 6.
gw_fieldcat-seltext_m = 'Batch number'.
gw_fieldcat-key = ' '.
APPEND gw_fieldcat TO gt_fieldcat.
CLEAR gw_fieldcat.
gw_fieldcat-fieldname = 'BWART'.
gw_fieldcat-tabname = 'itab'.
gw_fieldcat-col_pos = 7.
gw_fieldcat-seltext_m = 'Movement Type (Inventory Management)'.
gw_fieldcat-key = ' '.
APPEND gw_fieldcat TO gt_fieldcat.
CLEAR gw_fieldcat.
gw_fieldcat-fieldname = 'BUDAT'.
gw_fieldcat-tabname = 'itab'.
gw_fieldcat-col_pos = 8.
gw_fieldcat-seltext_m = 'Posting Date in the Document'.
gw_fieldcat-key = ' '.
APPEND gw_fieldcat TO gt_fieldcat.
CLEAR gw_fieldcat.
gw_fieldcat-fieldname = 'MENGE'.
gw_fieldcat-tabname = 'itab'.
gw_fieldcat-col_pos = 9.
gw_fieldcat-seltext_m = 'QUANTITY'.
gw_fieldcat-key = ' '.
APPEND gw_fieldcat TO gt_fieldcat.
CLEAR gw_fieldcat.
gw_fieldcat-fieldname = 'MEINS'.
gw_fieldcat-tabname = 'itab'.
gw_fieldcat-col_pos = 10.
gw_fieldcat-seltext_m = 'Basic unit of measure'.
gw_fieldcat-key = ' '.
APPEND gw_fieldcat TO gt_fieldcat.
CLEAR gw_fieldcat.
gw_fieldcat-fieldname = 'KOSTL'.
gw_fieldcat-tabname = 'itab'.
gw_fieldcat-col_pos = 11.
gw_fieldcat-seltext_m = 'Cost center'.
gw_fieldcat-key = ' '.
APPEND gw_fieldcat TO gt_fieldcat.
CLEAR gw_fieldcat.
gw_fieldcat-fieldname = 'AUFNR'.
gw_fieldcat-tabname = 'itab'.
gw_fieldcat-col_pos = 12.
gw_fieldcat-seltext_m = 'Order Number'.
gw_fieldcat-key = ' '.
APPEND gw_fieldcat TO gt_fieldcat.
CLEAR gw_fieldcat.
gw_fieldcat-fieldname = 'RSNUM'.
gw_fieldcat-tabname = 'itab'.
gw_fieldcat-col_pos = 13.
gw_fieldcat-seltext_m = 'Number of Reservation / Depe'.
gw_fieldcat-key = ' '.
APPEND gw_fieldcat TO gt_fieldcat.
CLEAR gw_fieldcat.
gw_fieldcat-col_pos = 14.
gw_fieldcat-fieldname = 'CHECKBOX'.
gw_fieldcat-seltext_m = 'Compltd'.
gw_fieldcat-checkbox = 'X'.
gw_fieldcat-edit = 'X'.
APPEND gw_fieldcat TO gt_fieldcat.
CLEAR gw_fieldcat.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = 'ZREPORT'
I_CALLBACK_PF_STATUS_SET = 'PF_STATUS'
I_CALLBACK_USER_COMMAND = 'USER_COMMAND'
IS_LAYOUT = gt_layout
IT_FIELDCAT = gt_fieldcat
TABLES
t_outtab = itab
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2.
ENDFORM. " display_alv_output
FORM USER_COMMAND USING P_UCOMM TYPE SY-UCOMM
P_SELFLD TYPE SLIS_SELFIELD.
*set pf-stATUS 'YSTATUS'.
case p_ucomm.
when 'SAVE'.
Data ref1 type ref to cl_gui_alv_grid.
CALL FUNCTION 'GET_GLOBALS_FROM_SLVC_FULLSCR'
IMPORTING
E_GRID = ref1.
call method ref1->check_changed_data.
*itab2[] = itab[].
delete itab where checkbox = space. "Mark is the field for the checkbox
modify ztable from table itab2.
endcase.
ENDFORM.
this is my cde error is not came,
plz check that one,send me replyREPORT YH648_1111111.
TABLES SSCRFIELDS.
parameter : c AS CHECKBOX USER-COMMAND SUNIL
AT SELECTION-SCREEN .
SY-UCOMM = SSCRFIELDS-UCOMM.
START-OF-SELECTION.
CASE SY-UCOMM.
WHEN 'SUNIL'.
WRITE 'SUNIL KUMAR .BETHINEDI'.
WHEN ' '.
WRITE 'BLA BLA BLA '.
ENDCASE.
THIS IS THE WAY U CAN USE THE CHECK BOX.
INSTED OF THIS WRITE 'SUNIL KUMAR .BETHINEDI'.
U USE THE INSERT STATEMENT. -
How to deactivate button after click??
hello experts,
how to deactivate button after click???
there are 2 buttons
Download | Add
now if i click on download the download button should get deactive.....n Add button position should not change..
thanks in advance.Hi,
1. Declare an internal table of type sy-ucomm. i.e.
DATA : it_fcode TYPE TABLE OF sy-ucomm.
2. Append Function Codes of the options in the Menu that you want to deactivate to the above declared internal table. For e.g. If DWL & ADD are the Function Codes of options that need to be deactivated then,
APPEND 'DWL' TO it_fcode.
APPEND 'ADD' TO it_fcode.
3. Set PF_-Status as shown below.
SET PF-STATUS 'status_name' EXCLUDING it_fcode.
4. Now, the options in the menu bar with Function Codes 'DWL' & 'ADD' will be deactivated.
aRs
pOINTS ARE ALWAYS WELCOME -
How to stored data after clicking check box save in data base table
TABLES:mseg,mard,mkpf.
TYPE-POOLS:slis.
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
SELECT-OPTIONS:smblnr FOR mseg-mblnr MODIF ID m1,
smatnr FOR mseg-matnr MODIF ID m2,
swerks FOR mard-werks MODIF ID m3,
slgort FOR mard-lgort MODIF ID m4,
slgpbe FOR mard-lgpbe MODIF ID m5,
scharg FOR mseg-charg MODIF ID m6,
sbwart FOR mseg-bwart MODIF ID m7,
skostl FOR mseg-kostl MODIF ID m8,
saufnr FOR mseg-aufnr MODIF ID m9,
srsnum FOR mseg-rsnum MODIF ID m10.
SELECTION-SCREEN END OF BLOCK b1.
SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME TITLE text-002.
PARAMETERS:pre RADIOBUTTON GROUP radi USER-COMMAND ucomm DEFAULT 'X',
pse RADIOBUTTON GROUP radi,
bps RADIOBUTTON GROUP radi.
SELECTION-SCREEN END OF BLOCK b2.
SELECTION-SCREEN BEGIN OF BLOCK b3 WITH FRAME TITLE text-003.
PARAMETER:layout TYPE i.
SELECTION-SCREEN END OF BLOCK b3.
DATA:BEGIN OF itab OCCURS 0,
mblnr LIKE mseg-mblnr,
matnr LIKE mseg-matnr,
werks LIKE mard-werks,
lgort LIKE mard-lgort,
lgpbe LIKE mard-lgpbe,
charg LIKE mseg-charg,
bwart LIKE mseg-bwart,
budat LIKE mkpf-budat,
menge LIKE mseg-menge,
meins LIKE mseg-meins,
kostl LIKE mseg-kostl,
aufnr LIKE mseg-aufnr,
rsnum LIKE mseg-rsnum,
checkbox TYPE c,
END OF itab.
DATA: gt_fieldcat TYPE slis_t_fieldcat_alv,
gw_fieldcat TYPE slis_fieldcat_alv,
gt_layout TYPE slis_layout_alv.
START-OF-SELECTION.
SELECT msegmblnr msegmatnr mardwerks mardlgort mardlgpbe msegcharg msegbwart mkpfbudat
msegmenge msegmeins msegkostl msegaufnr mseg~rsnum
INTO TABLE itab FROM
mseg JOIN mard ON mardmatnr EQ msegmatnr
JOIN mkpf ON msegmblnr EQ mkpfmblnr
WHERE mseg~matnr IN smatnr.
IF sy-subrc EQ 0.
SORT itab BY matnr.
PERFORM display_alv_output.
ENDIF.
*& Form display_alv_output
text
--> p1 text
<-- p2 text
FORM display_alv_output.
REFRESH gt_fieldcat.
gw_fieldcat-fieldname = 'MBLNR'.
gw_fieldcat-tabname = 'itab'.
gw_fieldcat-col_pos = 1.
gw_fieldcat-seltext_m = 'material document'.
gw_fieldcat-key = 'x'.
APPEND gw_fieldcat TO gt_fieldcat.
CLEAR gw_fieldcat.
gw_fieldcat-fieldname = 'MATNR'.
gw_fieldcat-tabname = 'itab'.
gw_fieldcat-col_pos = 2.
gw_fieldcat-seltext_m = 'material'.
gw_fieldcat-key = ' '.
APPEND gw_fieldcat TO gt_fieldcat.
CLEAR gw_fieldcat.
gw_fieldcat-fieldname = 'WERKS'.
gw_fieldcat-tabname = 'itab'.
gw_fieldcat-col_pos = 3.
gw_fieldcat-seltext_m = 'plant'.
gw_fieldcat-key = ' '.
APPEND gw_fieldcat TO gt_fieldcat.
CLEAR gw_fieldcat.
gw_fieldcat-fieldname = 'LGORT'.
gw_fieldcat-tabname = 'itab'.
gw_fieldcat-col_pos = 4.
gw_fieldcat-seltext_m = 'storage location'.
gw_fieldcat-key = ' '.
APPEND gw_fieldcat TO gt_fieldcat.
CLEAR gw_fieldcat.
gw_fieldcat-fieldname = 'LGPBE'.
gw_fieldcat-tabname = 'itab'.
gw_fieldcat-col_pos = 5.
gw_fieldcat-seltext_m = 'storage bin'.
gw_fieldcat-key = ' '.
APPEND gw_fieldcat TO gt_fieldcat.
CLEAR gw_fieldcat.
gw_fieldcat-fieldname = 'CHARG'.
gw_fieldcat-tabname = 'itab'.
gw_fieldcat-col_pos = 6.
gw_fieldcat-seltext_m = 'Batch number'.
gw_fieldcat-key = ' '.
APPEND gw_fieldcat TO gt_fieldcat.
CLEAR gw_fieldcat.
gw_fieldcat-fieldname = 'BWART'.
gw_fieldcat-tabname = 'itab'.
gw_fieldcat-col_pos = 7.
gw_fieldcat-seltext_m = 'Movement Type (Inventory Management)'.
gw_fieldcat-key = ' '.
APPEND gw_fieldcat TO gt_fieldcat.
CLEAR gw_fieldcat.
gw_fieldcat-fieldname = 'BUDAT'.
gw_fieldcat-tabname = 'itab'.
gw_fieldcat-col_pos = 8.
gw_fieldcat-seltext_m = 'Posting Date in the Document'.
gw_fieldcat-key = ' '.
APPEND gw_fieldcat TO gt_fieldcat.
CLEAR gw_fieldcat.
gw_fieldcat-fieldname = 'MENGE'.
gw_fieldcat-tabname = 'itab'.
gw_fieldcat-col_pos = 9.
gw_fieldcat-seltext_m = 'QUANTITY'.
gw_fieldcat-key = ' '.
APPEND gw_fieldcat TO gt_fieldcat.
CLEAR gw_fieldcat.
gw_fieldcat-fieldname = 'MEINS'.
gw_fieldcat-tabname = 'itab'.
gw_fieldcat-col_pos = 10.
gw_fieldcat-seltext_m = 'Basic unit of measure'.
gw_fieldcat-key = ' '.
APPEND gw_fieldcat TO gt_fieldcat.
CLEAR gw_fieldcat.
gw_fieldcat-fieldname = 'KOSTL'.
gw_fieldcat-tabname = 'itab'.
gw_fieldcat-col_pos = 11.
gw_fieldcat-seltext_m = 'Cost center'.
gw_fieldcat-key = ' '.
APPEND gw_fieldcat TO gt_fieldcat.
CLEAR gw_fieldcat.
gw_fieldcat-fieldname = 'AUFNR'.
gw_fieldcat-tabname = 'itab'.
gw_fieldcat-col_pos = 12.
gw_fieldcat-seltext_m = 'Order Number'.
gw_fieldcat-key = ' '.
APPEND gw_fieldcat TO gt_fieldcat.
CLEAR gw_fieldcat.
gw_fieldcat-fieldname = 'RSNUM'.
gw_fieldcat-tabname = 'itab'.
gw_fieldcat-col_pos = 13.
gw_fieldcat-seltext_m = 'Number of Reservation / Depe'.
gw_fieldcat-key = ' '.
APPEND gw_fieldcat TO gt_fieldcat.
CLEAR gw_fieldcat.
gw_fieldcat-col_pos = 14.
gw_fieldcat-fieldname = 'CHECKBOX'.
gw_fieldcat-seltext_m = 'Compltd'.
gw_fieldcat-checkbox = 'X'.
gw_fieldcat-edit = 'X'.
APPEND gw_fieldcat TO gt_fieldcat.
CLEAR gw_fieldcat.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = 'ZREPORT'
IS_LAYOUT = gt_layout
IT_FIELDCAT = gt_fieldcat
TABLES
t_outtab = itab
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2.
ENDFORM. " display_alv_output
this is mycode .
send me replay.Hi Lakshmi,
Can u explain briefly what is ur requirement. U mean to say that after clicking the checkbox in data base table or Screen?
Regards,
Jayaram... -
How to use "sequence" after we add new data ?
Dear all :
Could someone tell me how to increase the number after we add new data and put the number into one field per time ?
Thank youIn the Initial Value property for an item on a block, you can assign it to a sequence value. Just put the name of the sequence in the Initial Value:
Specifies the default value that Form Builder should assign to the item whenever a record is created. The default value can be one of the following:
Here's the part of the help screen for Initial Value that shows how to assign a sequence.
raw value (216, 'TOKYO')
form item (:block_name.item_name)
global variable (:GLOBAL.my_global)
form parameter (:PARAMETER.my_param)
a sequence (:SEQUENCE.my_seq.NEXTVAL)
Dave -
I lost all my data after clicking F11
Hi everybody!
I have lost all my data when I clicked F11 and factory recovery was executed.
Is there any way to return back the data? They are very important.
They were all my data, very important including all data from university - for more than 4 years.
Please help me. I need an urgent help. The operating system is Windows Vista Business Edition - it is licensed.
Best Regards,
Manuel
This question was solved.
View Solution.Hi Manuel,
Unfortunately I have bad news for you.
F11 invokes the Recovery Manager, where you have a number of options. The following two options are under the I need help immediately section.
Microsoft System Restore is a nondestructive process. If you make a mistake you can roll your system back to a restore point on a date that works for you.
System recovery is, on the other hand, a destructive process which deletes all data. Before the process begins it does warn you.
You may be able to recover your data by contracting a data recovery company. It will be quite expensive and without a guarantee of success.
Did you not have your university data backed up on an external drive?
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer -
How to get result after click alert view by itms-services://?action=download
hi,
is any possible to get result after click alert view by using [[UIApplication sharedApplication] openURL:@"itms-services://?action=download-manifest&url...
when i close app, the alert view ([[UIApplication sharedApplication] openURL) is aleady exist, is it not uialertview?, i can't find any alert view by
for (UIWindow *keyboardWindow in [[UIApplication sharedApplication] windows]) {
if ([[keyboardWindow description] hasPrefix:@"<UIALERT"] == YES) {
isExists = YES;
any help, thanks.I have the MS-6968 device and i want to use driver 1.4.x or 3.0.x. I found the driver 1.4.2.10 but i cannot find any WIDCOMMSecurity code.
So, can anyone give me a link for BTWPatcher.exe???
It cannot be found here (Jon's Bluetooth ) anymore.
Thanks -
Find the latest Start date after a gap in date Field For each id
Hi All, Can anyone help me in this, as it is so urgent ..My requirement is to get the latest start date after a gap in a month for each id and if there is no gap for that particular id minimum date for that id should be taken….Given below the scenario
ID StartDate
1 2014-01-01
1 2014-02-01
1 2014-05-01-------After Gap Restarted
1 2014-06-01
1 2014-09-01---------After last gap restarted
1 2014-10-01
1 2014-11-01
2 2014-01-01
2 2014-02-01
2 2014-03-01
2 2014-04-01
2 2014-05-01
2 2014-06-01
2 2014-07-01
For Id 1 the start date after the latest gap is 2014-10-01 and for id=2 there is no gap so i need the minimum date 2014-01-01
My Expected Output
id Startdate
1 2014-10-01
2 2014-01-01
Expecting your help...Thanks in advanceIf you're using SQL Server 2012 this will work for you...
IF OBJECT_ID('tempdb..#temp') IS NOT NULL
DROP TABLE #temp
GO
CREATE TABLE #temp (
ID INT,
StartDate DATE
INSERT #temp (ID, StartDate) VALUES
(1,'2014-01-01'),
(1,'2014-02-01'),
(1,'2014-05-01'),
(1,'2014-06-01'),
(1,'2014-09-01'),
(1,'2014-10-01'),
(1,'2014-11-01'),
(2,'2014-01-01'),
(2,'2014-02-01'),
(2,'2014-03-01'),
(2,'2014-04-01'),
(2,'2014-05-01'),
(2,'2014-06-01'),
(2,'2014-07-01')
-- SQL 2012 and later --
;WITH gg AS (
SELECT
COALESCE(DATEDIFF(mm, LAG(t.StartDate, 1) OVER (PARTITION BY t.ID ORDER BY t.StartDate), t.StartDate), 2) AS GetGap
FROM #temp t
), did AS (
SELECT DISTINCT t.ID FROM #Temp t
SELECT
did.ID,
x.StartDate
FROM
did
CROSS APPLY (
SELECT TOP 1
gg.StartDate
FROM gg
WHERE did.ID = gg.ID
AND gg.GetGap > 1
ORDER BY gg.StartDate DESC
) x
If you're on an earlier version than 2012, let me know. It's an easy rewrite but the final code isn't as efficient.
Jason Long -
How can u trace process of workflow throug workflow base table.
Hi,
My previous question might be confusing
Just want to ask
How can u trace process of workflow throug Which workflow base table.
Please It's urgent
Thanks
BachanBachan,
Why do you need to enable trace from the backend? You can run "bde_wf_item.sql" script, this script gives similar information as wfstatus.sql and wfstat.sql give but with more debugging information
Note: 187071.1 - bde_wf_item.sql - Runtime Data of a Single Workflow Item
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=187071.1 -
How to deactivate buttons after click??
Hi experts,
i want to deactivate two buttons on click of one.
Add
Delete
on click of Add.....it should deactivate Add and Delete Button....
how can i do that????*****define following internal table
Internal table used to exclude keys from status bar
DATA: BEGIN OF IT_EXTAB100 OCCURS 10, "Controls Functions for screen-no (e.g.0100)
CODE(4) TYPE C,
END OF IT_EXTAB100.
Excluding keys before display of status bar
CLEAR IT_EXTAB100. REFRESH IT_EXTAB100.
MOVE: 'ADDS' TO IT_EXTAB100-CODE.
APPEND IT_EXTAB100.
MOVE: 'DELT' TO IT_EXTAB100-CODE.
APPEND IT_EXTAB100.
SET PF-STATUS 'xxxx' EXCLUDING IT_EXTAB100.
XXXX is the pf-status defined -
How to play sound after clicking on an object?
Can anyone explain me how to play a sound in java when I click on a particular object? I have read lots of threads but couldn't find anything. All I want is a short sound(3,4 seconds) to be played each time I click on an object. I know I need to use Sound API but I cannot find anything helpful
Thanks in advanceflounder wrote:
ProGenius wrote:
I have read lots of threads but couldn't find anything.
[I found lots of info|http://lmgtfy.com/?q=java+audioclip]
that is knowing you can use audioclip. Even searching for "java sound tutorial" gives many good resources, including the sun trail:
http://java.sun.com/docs/books/tutorial/sound/index.html
Maybe you are looking for
-
How do i send an e-mail to a pre set group of contacts?
Hi Before Yosemite, I used to be able to compose a new message and then click and drag the group of contacts to the 'to' box... Now I can't do this.. I have to open up the separate 'Contacts' app and drag the group from there. Is there a way I can d
-
HT204291 Apple TV AirPlay help
Hey, I got a Apple TV and my iPhone 4S won't AirPlay with it. My sisters Iphone 5 will though. The Apple TV will only let me play music. Please help
-
Re-applying colour to a b&w image.
How does one re-apply the original colour to a selected part of the photo which has been converted to b&w ? I can add b&w to selected part of a colour image but don't know how to do it in reverse. Many thanks
-
Problems Importing Premiere Pro Project into After Effects
I've got my first Pemiere Pro CS6 project completed. Now i want to import it into After Effects CS6 to add titles. The PR file includes two segments, two still photos and two AE compositions. I am trying to import the PR project into AE two different
-
Been a customer for over 10 years. Been running a web hosting company also for over ten years. Verizon has blacklisted my company's mail server IP address. So, it says to visit this page to request delisting. http://my.verizon.com/micro/whitelist/ I