How to stream flv files from a diffferent directory outside the applications folder

Hi everyone,
I want to stream the flv files from a different location
stored in the hard disk, which is outside the applications folder
in the FMS installation root directory. Does anyone know how to do
it?
Regards,
Diptanu

VOD changes won't help him, he said outside the applications
folder. According to adobe any new vod folders must be in the
applications folder, hence virtually worthless for most purposes. A
better question may be, how do you specify a folder on a different
local hard drive. I wish adobe wouldn't make it so complicated, it
should be a really simple matter.

Similar Messages

Streaming .FLV files from Media Server 4.5 using PHDS

I would like to stream .FLV files from adobe media server 4.5.
Requirements state that the files should be considered secret, so I decided that PHDS sounds like the
right thing.
I was able to stream an .FLV by placing it in the webroot/vod folder using an url like http://myserver/vod/test.flv
However the developer manual states that a way to enable PHDS at the server level is to uncomment the two lines like this.
<IfModule jithttp_module>
<Location /hds-vod>
    HttpStreamingJITPEnabled true
    HttpStreamingContentPath "../webroot/vod"
    JitFmsDirPath ".."
    Options -Indexes FollowSymLinks
# Uncomment the following directives to enable encryption
# for this location.
   EncryptionScope server
   ProtectionScheme phds
</Location>
</IfModule>
However I am not able to stream my FLV using url like http://myserver/hds-vod/test.flv
Question : Am I supposed to use the hds-vod in the URL or is /vod doing the same ?
                  Is the approach correct, or should the files go into an applications\myapplication\media folder ?
                  I will need some server side actionscript to validate access to the stream, is that possible without a dedicated application ?

Hi,
When you use the vod location directive you're basically using Progressive download so your URL is as : http://myserver/vod/test.flv
However, when you use the location directive hds-vod, it is HTTP Streaming, where the fragments are created on the fly. For this your URL needs to be as : http://myserver/hds-vod/test.f4v.f4m
Please note .flv files are not supported for HTTP streaming (via hds-vod location directive). You cannot use PHDS with .flv files.
Thanks,
Apurva

I have copied my music library from two different files from extewrnal hard drive into the Itunes folder. I tunes only recognizes some of the songs. I have reloaded 5 times and can't get intunes to recognize all my songs? HELP!

I have copied my music library from two different files from extewrnal hard drive into the Itunes folder. I tunes only recognizes some of the songs. I have reloaded 5 times and can't get intunes to recognize all my songs? HELP!

" When I did this, my library showed all the music I have "purchased" from itunes but did not have the music that I downloaded a long time ago through itunes from my old CDs."
Correct.
" How can I get that music to show up in my library now on my new computer? "
Copy it from your old computer or your backup copy of your old computer.
The sync is one way - computer to ipod.

Can't open PDF file from iBook on MAC. error "The application "ACDSee Pro" can't be opened."

Can't open PDF file from iBook on MAC. error "The application “ACDSee Pro” can’t be opened."

Hi arewers,
Do you have Adobe Reader installed, by any chance? If so, are you aware if it was the PPC or Intel version which you installed? In any case, for the time being, have a quick look in 'HD/Library/Internet Plug-ins/' using Finder and see if there's an Adobe plugin lying around. If there is, try moving it out of the folder and restarting Safari.
Yang

Alas, I updated to Lion and need to remove Appleworks from laptop. What, besides the application (folder) else do I need to remove. I am putting items onto a CD so I may be able to work on a Leopard machine.

Alas, I updated to Lion and need to remove Appleworks from laptop. I am putting items onto a CD so I may be able to work on a Leopard machine.What, besides the application (folder) else do I need to remove to the CD?

(user)/Documents/AppleWorks 6 Button Bars (this is no longer used) and Appleworks User Data
(user)/Library/Preferences/Appleworks (folder)

How to delete flv files from iPhone library

Hi, I am a newbie to iOS and I am using factory unlocked iPhone 4s with iOS 7. I have added some flv files to library and synced them to iPhone using iTunes. But as iPhone doesn't support flv files so I can't see them in movies. They have claimed disk space and I need to figure out some way to delete them to reclaim disk space.
Kindly help

Hello sibtainhassan,
Thank you for using Apple Support Communities.
Manually managing your device allows you to choose the content you want to have with you.
For more information, take a look at:
Managing content manually on iPhone, iPad, and iPod
https://support.apple.com/kb/ht1535
Have a nice day,
Mario

How do I transfer files from one user account on the mac mini to another user account?

I had to set up a new user account for my son. I need to transfer files from his old user account and from my user account to his new user account on the mac mini. How do I do this?

Move them to /Users/Shared/ and then into the new account.
(85692)

How do I transfer files from an old macbook to the new air?

I just received a new macbook air...I am stumped on how to transfer files and more specifically on how to get the Microsoft office for mac onto the harddrive since there is no cd drive!

First, the transfer of files from another computer is best done through Setup Assistant.
User Pondini has some great comprehensive pages on the very subject right here;
http://pondini.org/OSX/Setup.html
On installing Microsoft Office for the Mac on your unit, the best way is to download the trial of MS Office from Microsoft's website, and then use your disk set's activation code to activate the trial to a registered full version. This way, no DVD reader is needed.
Alternatively, you can use Remote Disk to share a DVD reader from another computer. http://support.apple.com/kb/HT1777
Or you can purchase an external Superdrive from Apple. Many other external USB DVD units will also work.

How do I transfer files from my current imac to the new one. My old imac is running 10.5.8

Hello
I got a new iMac 10.8.2 and also have a iMac 10.5.8 how can I conenct those 2 ?
All I want is to use some of my files on my new one.I don't want to transfer ALL my files,just some,like pictures. But only the once I need. Not all of them.
I have a FireWire cable,don't work, I have ethernet cable,don't work.
So I must do something wrong If someone could maybe explaint it to me step by step that would be great,since I am not a big Mac (computer) freak.
So basically I would like to use my old iMac as a external drive where I could get my files from and transfer them to my Mountain Lion, iMac.
Also If someone knows,why Mountain Lion always loses internet conections,would be also a very big help! Thank you!
But please, in simple step by step explaining. My english is not the best,my German is much better
Thank you so much already for the help, I really appreciated!

Oh, on the losing Internet, try this...
Make a New Location, Using network locations in Mac OS X ...
http://support.apple.com/kb/HT2712
10.7 & 10.8…
System Preferences>Network, top of window>Locations>Edit Locations, little plus icon, give it a name.
10.5.x/10.6.x/10.7.x instructions...
System Preferences>Network, click on the little gear at the bottom next to the + & - icons, (unlock lock first if locked), choose Set Service Order.
The interface that connects to the Internet should be dragged to the top of the list.
Instead of joining your Network from the list, click the WiFi icon at the top, and click join other network. Fill in everything as needed.
For 10.5/10.6, System Preferences>Network, unlock the lock if need be, highlight the Interface you use to connect to Internet, click on the advanced button, click on the DNS tab, click on the little plus icon, then add these numbers...
208.67.222.222
208.67.220.220
Click OK.
PS. Your English is quite good & completely understandable.

How do I transfer files from my hard drive to the MacBook?

I am a new Mac user and I transferred all of my files that were on my PC to an external hard drive in order to transfer them to the macbook. However once I plugged in the hard drive to my mac, I don't understand how to transfer my files over. There's no "My Computer" on a Mac so I don't know how to do it. Step by step instructions please! Thank you so much!!!!!!!!

milkaballet wrote:
Once yes but I turned it off! Oh no! Whats next?
It sounds like you got a prompt like this:
Clicked Use as Backup Disk, then got this one:
and clicked Erase. If so, your data has been deleted (not actually erased, regardless of what the message says, although if a backup got started, some of it may have been erased).
But first let's find out what's actually what.
Open the Disk Utility app (in your Applications/Utilities folder). Click the top line of the drive, similar to this:
then click the line for the volume (indented under the main one):
Report back with the Partition Map Scheme from the first one, and the Format for the second.

How do I upload videos from an SD card to the movies folder in Finder on my iMac?

I'm having trouble uploading videos from my SD card to my iMac. I'm wanting to save it in the "Movies" folder in Finder. When I open the SD card on my iMac, I am able to view the videos in QuickTime Player. They were an AVCHD file format. It gave me no option of saving the videos - not even with dragging them. So, I tried moving all of the files versus just one (in other words, instead of opening the file to view all of the videos, I just dragged the whole file without opening it). It saved to my iMac, but in the same way as it was on the SD card - I wasn't able to actually save the videos themselves. They were only able to be viewed with QuickTime Player - I couldn't do anything else with them. So, I took my SD card out of the computer and put it back in the video camera. I then realized than I could not view the videos in the camera - they wouldn't show up. I then plugged the SD card back into the iMac. The videos were now saved under a BDMV folder versus the AVCHD folder they had been under earlier. The AVCHD folder was there, but would not open. When I tried to open it, all it said was, "This operation could not be completed." The BDMV folder allows me to view the videos in QuickTime Player, but I still cannot save them to my iMac from the SD card. I even tried saving the videos to iPhoto by dragging the BDMV folder into iPhoto. All it did was say, "The following files could not be imported. The file is in an unrecognizable format." So, now, I am completely confused as to what I need to do as to save the videos onto my computer, and even how the videos are now saved under a BDMV folder versus the original AVCHD folder in the SD card. I'd greatly appreciate it if someone could help me with this problem. Thanks!

You should have an icon of the SD card on the desktop - do you? If not, go to Finder Preferences > General and make sure these items are checked to show:
Once the icon is showing, you can just drag the card content to your desktop. It depends on what you want to do with the video - just watch or edit in iMovie to share online or burn a DVD?

How to export flv file from Final Cut Pro?

I'm using Final Cut Pro and try to export edited video in "Flv" format. However, there is no such choice and only "Flc" available? My friend has the same version of Final Cut Pro and there is "Flv" format to choice, why?

I use QT conversion: file > Export > Using QuickTime Conversion >
Then, under Format I only have "3G, AIFF, FLC, iPod, QuickTime Movie...", no "Flash video (FLV)" as my friend's computer?

How to download a file from a link within an AIR application ?

Dear friends, I have created a simple AIR app with Flex, where it basically navigates toa specific URL. It works fine, all the links, and so on... however, when I need to click a specific link to download a file (DOC, XLS, PDF) from it... it just do NOT work ! why is it ? what am I supposed to do to achieve my purpose ? Appreciate any help, thanks in advance !

Hi Arun,
Goto AL11 - > click on the directory path and select your file -open the file - > click on menu item List - >save/send -> file
-> select the type of file.
Or you can write a small abap code using DATASETS. If you require I will post the code.
Hope it helps you.
Regards,
Rajani.

How to download a file from a table not in the parsing schema

We have a table in another schema which holds files in a blob column. I can create a form on this table and the file upload works fine. The file browse page item has the source as the blob column and storage type "BLOB column specified in Item Source attribute". The download link generated for the page shows a call to apex_util.get_blob_file and the parameters are correct. However, when you click on the link you get a Page Not Found 404 error. Same error in Apex 4.1.1. The plsql error is:
ORA-20544: Invalid table owner
ORA-06512: at "APEX_040000.WWV_FLOW_DML", line 1628
ORA-06512: at "APEX_040000.HTMLDB_UTIL", line 2244
ORA-06512: at line 31
Is there a way to use apex_util.get_blob_file to download a file when the table is in another schema?
Rod West

Hi,
I am not sure that the post explains everything as the "Automatic Row Processing" and "Automatic Row Fetch" process work fine on this page and therefore security should not be an issue.
Thanks for the view suggestion, but I am not sure that a view is a good option for us because the parsing schema does not have create view privilege and therefore the view would be difficult to install and maintain. We will problably end up with a custom download file process.
Rod West

Copy file from mounted DMG to the Applications folder?

I'm wanting to copy file (application) from a mounted DMG to the Applications folder. Something like:
tell application "Finder"
try
copy "Volumes:Dropbox Installer:Dropbox.app" to folder "Volumes:Macintosh HD:Applications"
end try
end tell
(But that doesn't work).
Preferably overwriting the existing application in that folder. Any help would be greatly appreciated.

tell application "Finder"
duplicate file "Volumes:S001TEST:S001-S001c-TEST.zip" to folder "Volumes:Macintosh HD:Applications" with replacing
end tell
I tried this principle in Applescript (Mavericks) and received error...
Finder got an error: Can’t set folder "Volumes:Macintosh HD:Applications" to file "Volumes:S001TEST:S001-S001c-TEST.zip".
"001TEST" is a disk image with filename of "S001TEST.dmg"
Any ideas why this won't work?

How to stream flv files from a diffferent directory outside the applications folder

Similar Messages

Maybe you are looking for