How to stream to muliple Airport Expresses at same time?

I have two Airport Expresses hooked up to two stereos in my house. I seem to be only able to broadcast my itunes to one or the other, but not both at the same time. Is there a setting I'm missing. (this is on a PC in case it matters)
Thanks.
Windows XP Pro

oenoman, Welcome to the discussion area!
Ensure that you are using iTunes 6.0.2 (or later) and the AirPort Express need to be using Firmware 6.3 (or later).

Similar Messages

How to use internet and airport express at same time?

I have my airport express set up in a room with my stereo. I can stream from computer and iTunes music library fine. My internet net gear modem is in another room connected to the phone line. My computer is an another room again. All devices can stream to the stereo from the iTunes library. I also want to play iTunes radio and other internet music apps and stream to the stereo. It seems they can't because they are unable to use both networks 'airport' and 'net gear' at the same time. I'm thinking if the airport express was plugged into the modem it would all work, is that right? But my stereo and speakers throughout the house all run from a different room. The other option is to move the phone but thats not an option either. What else can I do?

You need to tie things together in one network.
That means the express should be setup to join the netgear.. not work stand alone.
But it is much better to have ethernet run.. or use all apple routers. So you can extend wireless rather than join.
Some EOP homeplug adapters are ok.. but they are rather like wireless in being unknown until you test them. And why ethernet is well worth the cost.

How to stream Webcam and Desktop at the same time?

Hey Guy,
I just got a little Problem with FMLE... I want to stream live during a Game, but I dont know how to stream Desktop and Webcam at the same time ^^. The streaming Platform i want to use is twitch.tv.. the most common Gamin Platform I think...
I got an IMac i7.
Pls help me I dont get how all these ProGamer do it -.-
Thanks in advance
Kathi

You're going to need additional software or hardware. If you're running a Macintosh, try CamTwist. It's free and allows you to create virtual "cameras" from just about anything you can see on your computer. It's a bit clunky getting used to the interfact and how it works, however.
Hardware solutions (like scanline converters and video switchers) can get pretty expensive. So you may want to go with a piece of software that can handle on-the-fly video compositing/switching. There are two applications that come to mind right off the bat -- and lucky for you, both of them can also output to a live streaming server.
Wirecast is a popular choice, although the pricing starts around $500. It's Macintosh/Windows.
A very popular choice among gamers is XSplit (Windows only) and is a subscription-based model (you pay a small fee by the month, quarter, or year). XSplit has some very impressive compression happening under the hood, and was originally designed for gamers who wanted to share their desktop, XBOX, or PS3 adventures... all while also being able to lay over banners, PIP (picture-in-picture) of themselves, or anythhing else they wanted to clutter the screen with.
If you're running on Windows, give XSplit at shot. It can easily handle your desktop (or most anything else) as a "camera" as well as being able to lay your webcam on top of the desktop feed.

How can I Connecticut two Airport Express with One Time Capsula?

Only by Wifi or by LAN in a row?

What are you trying to accomplish with the AirPort Express devices?
Where will the Express devices be located in relation to the Time Capsule?
If you are planning to use the Express devices to "extend" the wireless range of your network, Ethernet LAN will always provide far better performance than trying to connect the Express devices using wireless only.
You have the option of connecting both AirPort Express devices directly back to two LAN <-> ports on the Time Capsule....or....connecting one Express back to the Time Capsule and then connecting the second Express to the first Express using Ethernet. This assumes that you have a "new" Express with both WAN and LAN ports.
If you choose wireless only, both Express devices will connect back directly to the Time Capsule, so both of them should be located where they can receive a strong signal from the Time Capsule wireless.
A "hybrid" approach can also work. Connect one Express to the Time Capsule using an Ethernet cable and then setup the second Express to connect to the first Express using wireless only.

How do I use my airport express or time capsule to increase the signal strength of my comcast router

How do I use my airport express and/ or time capsule to increase the range of my newly installed comcast modem/router.

Neophite50 wrote:
Thanks.
A question. Do I plug the TC into the Comcast modeum Router or the iMac?
Both is good.. but at least one of your routers.. TC or express must be plugged into the router.. the imac can get internet connection by wireless.

I have just upgraded iTunes to version 11 and now cannot stream via my airport express to my hiFi. I get error 15000. how can this be corrected?

I have just upgraded iTunes to version 11 and now cannot stream via my airport express to my hiFi. I get error 15000. how can this be corrected?

You've done great so far to upgrade to Leopard & install more RAM. Now install the 10.5.8 combo update at http://support.apple.com/downloads/Mac_OS_X_10_5_8_Combo_Update
After you install the 10.5.8 update, click on the Apple in the menu & select Software Update. You will then be informed of some application updates. iTunes may be one of them. Then click to install the app updates.
 Cheers, Tom

How do I use the airport express to connect a remote PC via ethernet cable and access the internet via wireless connection, How do I use the airport express to connect a remote PC via ethernet cable and access the internet via wireless connection

Trying to connect my xbox to the airport express. Have wireless in home and do not have a ethernet point behind tv/xbox. How do I configure the airport express to connect to my wireless network and then the airport express can use its connection via ethernet to connect the xbox to the internet.

Is your AirPort Express Base Station (AX) a 802.11n model? If it is, you can reconfigure it as a wireless Ethernet bridge or ProxySTA. This would allow the AX to join another wireless network and have its Ethernet port enabled for wired clients, like the Xbox 360.
To activate ProxySTA, you must set up the Express to join a wireless network and then enable the Allow Ethernet Clients setting; both settings are located in the Wireless tab of AirPort Utility.

How do I use my airport express to enhance my airport extreme?

how do I use my airport express to enhance my airport extreme?

Check my post in the thread I've linked to below.
https://discussions.apple.com/thread/3703370

How to set up the airport express with a linksys wireless-g broadband router

I need to know if and how to set up an airport express to use to extend a home wi-fi network. I have AT&T service with a 2WIRE modem. I am using a Linksys wireless-G broadband router. I also have the new Macbook Air notebook. The airport express keeps giving me a blinking amber light even when the ethernet cable (from the modem) connected. Please let me know how to set up an extended wifi network using this system. Any help would be appreciated.

If that is all that is done, the Express would not provide more wireless coverage. Instead, it would duplicate the coverage provided by the Linksys and there would be two WiFi systems covering approximately the same area. As per my above comment, one Express connects via Ethernet to the Linksys. The second Express provides the extension.
You must have misunderstood what I was saying.
Linksys is providing a wireless network.
The Express is connected to one of the LAN ports on the Linksys router using a long Ethernet cable (or Ethernet powerline adapters)
The Express is located on the other side of the house, for example.
The Express is configured to create a wireless network using the same wireless network name, security and password as the Linksys router
The Express is configured in Bridge Mode
This has worked quite well for me for years. Computers "switch" from one wireless access point to another smoothly and automatically while they move around the house.
Although this is an "extended" network, it is technically known as a "roaming" network.
This is what I was suggesting as a possible alternative without having to buy more hardware.

How can I use an Airport Express to join my wireless network and provide an internet signal to my Power Mac g5 via an ethernet cable?

I have a power mac g5 that does not have a wireless card, and connects to the internet via ethernet cable.
I want to know how to set up an airport express so that it joins my wireless home network and provides the G5 with an internet signal.
This via an ethernet cable that is plugged into the airport express and then into the ethernet port on the g5.
Please advise as I have configured the airport express in every way possible, the green light is on and when I plug the ethernet cable into the G5 my network cofigurations shows nothing and says that the ethernet cable is not plugged in (It is).
I get an internet signal if the ethernet cable is plugged directly into my wireless router, so the ethernet port works.
Please assist. Thanks.

Two requirements that must be met to do what you want.......
1) An AirPort Express 802.11n must be used. Check the Model No on the label on the side of the Express. It needs to be A1264. Any other model number will not do what you want.
2) The Express must be configured to "Join a wireless network" and the option to enable Ethernet Clients must be checked.
Open AirPort Utility and click Manual Setup
Click the Wireless tab below the row of icons
The box to "Allow Ethernet Clients" must be checked
Please check to verify that your AirPort Express meets both requirements

How do you add an Airport Express to an existing Airport Express network

how do you add an Airport Express to an existing Airport Express network

I assume that you are interested in using the new Express to extend the wireless range of the other.
If so, please check out the following Apple Support article.

How can I get the Airport Express to handle all the PPPoE stuff?

Hi, I’m visiting my family in China, and now trying to help my dad, with his Airport Express and how to set up a PPPoE connection.
We have currently set up the Airport Express in bridge mode (not distributing IP adresses and selecting DHCP under the Internet tab in admin utility). The Airport settings on our two computers is set up to connect using PPPoE using the given login name and password. (ps! we can not see the Base station in Airport Admin Utility when using these settings, we would have to select a new location from the Apple menu to see it and make condigurations.)
What we want is to do, is to have the Airport Express connect to the ISP using a PPPoE connection and not through the computer.
I know there is a 'Connect using PPPoE' option in Airport admin util, letting me input account name and password. If I select this setting instead of DHCP, enable distribution of IP addresses and configure my Airport card to NOT connect using PPPoE, I will see my base station in the Airport admin util with the IP address of 10.0.1.1 (or similar) and my computer will have x.x.x.2. Next to the Airport icon in the menubar, a scrolling message will say 'Looking for PPPoE host' without anything happen. I am sure my account name and password is correct as they've both worked when using this computer to connect to PPPoE (like now)
How can I get the Airport Express to handle all the PPPoE stuff without using bridge mode?
Ps! Both me and my dad have iPhones whom we can’t seem to get to connect unless its been distributed an IP address cause there's as fars as I know, no options of inputing a PPPoE user name and password.

Any solutions to this? I'm in China also, in Beijing, trying to get my Airport Express to work with an ADSL modem.
Direct ethernet cable connection to my Macbook works fine.
When I configure the Airport Express with the ID and password that seems to be fine also – Airport Express shows a green light.
But I cannot figure out the settings to connect wirelessly from my Macbook to the Airport Express. I get a constantly scolling message: "Looking for PPPoEhost..."
thanks
Paul

How to set up an Airport Express on Windows 8 on laptop with no CD drive?

I recently purchased an Asus Ultrabook which has no CD drive. I have Airport Express set up on my old laptop, this was set up via an installation CD.
How do I move the Airport Express to my new laptop and install the software without the CD? I can't seem to find a software download for it.
I'm sure this is a basic question for those in the know, but I'm stumped!
Thanks :-)

Welcome to Apple Support Communities
If your PC hasn't got a disc drive, download AirPort Utility from the Apple website to set up the AirPort Express > http://support.apple.com/kb/DL1547?viewlocale=es_ES

How do I reconfigure my Airport Express in client mode?

My home uses an AT&T U-Verse wireless network to connect to the Internet. I also have an Airport Express hooked to a USB HP Printer to create wireless access to the printer. With a change in U-Verse service, AT&T replaced my network interface with a new box, connected that box to new port at the sub-station, a new wireless network name and a new wireless network password. Now everything works except my "wireless" printer. I suspect that the issue is that the Airport Express has the wrong network name and password, but cannot figure out how to change it. My Airport Utility is version 6.3.1 and it does not find my Airport Express. My Airport Express is an older one and I can find no model number on it anywhere. How do I reconfigure my Airport Express.
Previously when trying to install an Airport Extreme on my system, I proved with several long conversation with Apple support that it would not work with the U-Verse system. I had to take the Airport Extreme back and use two USB hard drives for Tim capsule backups, one for each computer.

AirPort Utility 6.3.1 will work with the AirPort Express A1264, so something else is amiss.
Power up the AirPort Express for a few minutes, then hold in the reset button on the Express for 10-12 seconds and release. Allow a full minute for the Express to restart.
Open AirPort Utility
Click on Other WiFi Devices
Click AirPort Express
That should allow you to reconfigure the Express

Error message when I try to stream iTunes over Airport Express

When I try to stream iTunes over Airport Express, I get an error message: An unknown error (-15006) occurring while connecting to the remote speaker. This just started happening since I upgraded to iTunes 9. Is there a fix?

When I try to stream iTunes over Airport Express, I get an error message: An unknown error (-15006) occurring while connecting to the remote speaker. This just started happening since I upgraded to iTunes 9. Is there a fix?

How to stream to muliple Airport Expresses at same time?

Similar Messages

Maybe you are looking for