How to strech a music clip for the Entire video

Hello Every-one.
I have a 30 minutes video, and I have a 10 seconds music clip, instead of copy and paste the Music clip, all the way until the end of my video,, Is there other Techniques so i can apply this 10 Seconds Music Clip for my entire movie.
Thanks
Simon

Surely you're gonna have to edit it on the beat so that the extended piece appears seamless. I'm not sure there's an automated way of doing that.
Use the asterisk key on the numeric pad to tap the beat and leave markers in the timeline. Cut and edit acccordingly.

Similar Messages

My ipad2 is only allowing me to email 30 sec clips of a video that I made which is saved in Photos on my iPad2. How can I get it to email the entire video?

My iPad2 is only allowing me to email 30 sec clips of a video that I made which is saved in Photos on my iPad2. How can I get it to email the entire video?

It is most likely a size issue. I have a 3 minute video that's almost 200 megs. If you're just trying to show it, you might consider youtube. if you're wanting to upload/share it then you can try things like Dropbox or other onlilne file sharing programs.

HT2729 I cannot synch a movie from my iMac to my iPad. I keep getting a message that I am not connected to the internet. Yet, I can fetch my email, access many newspappers, and listen to music clips for the itunes store. I did a retart of all without l

I cannot synch movies to my iPad. This has worked for me in the past. I keep getting an error message that I am not connected to the internet. Yet, I certainly am. How else could I post this message. I can listen to music clips from the iTunes store, fetch my email, and read current newspapers on the internet. I restarted both my iMac and my Ipad and that didnot help.

I completely understand what is happening. I know that you are connected to the Internet. I made the suggestion because I have seen it work in similar circumstances. The Apple iTunes servers can be a bit fussy about things and sometimes rebooting the router clears up this miscommunication between iTunes and your network.
Have you tried signing into your account and then try to sync again. Go to Store>View Account. You will have to enter your password. Then try to sync again. Or try signing out completely in Store>Sign out. Quit iTunes, sign in again and then try to sync again.
Sometimes refreshing settings will help clear up weird problems.

How to make 1 spry menu for the entire site? but not on each page

i have a website that i wish to have multiple pages available all form the same menu and late and probably at regular intervals add more tabs to the menu
is there a way to create a spry menu speratley that the page some how references, something like a frameset but without using framesets?
im sort of new to webdesigning and unsure of the correct terminology, so i am finding it difficult to look up stuff that i don't know the name for, but will gladly go read someting if you point me in the right direction.
regards
for now
wayne

You can do this with PHP or ColdFusion
These are "server side" scripting languages so you will have to test your website after you upload to you web hosting account.
Or if you set up a local server. Without the local server you will get errors when you open them in firefox.
To use the following what you do is "Cut" the part you want to be on all pages out, "Paste" it into a seperate document and in its place on your page you put one of the following suitable tags.
You will also have to rename your main file to .php or .cfm as opposed to .html
Again, whatever page you put one of these tags on, their extention must change match the type of tag used.
First Method (PHP):
PHP is the more common method -
<?php @ require_once ("yourMenu.html"); ?>
Require_once is basically a safeguard so that you don't add the menu twice onto a page.
This will only work for PHP 4+
This method would work for older versions of php too -
<?php @ include("yourMenu.html"); ?>
Second Method (ColdFusion):
This will only work if your host has ColdFusion installled -
<cfinclude template="bla.html">
eg index.html
<html>
<head>
<title>Stuff</title>
<head>
<body>
<?php @ require_once("SpryMenu.html"); ?>
</body>
</html>
SpryMenu.html
<ul id="menubar1" class="MenuBarHorizontal">
    <li><a class="MenuBarItemSubmenu" href="#">Item 1</a>
        <ul>
            <li><a href="#">Item 1.1</a></li>
</ul>

How do I swap one clip for another in Final Cut Pro 7?

How do I sway one clip for another in Final Cut Pro 7? I am doing what it says in a book but it is not working. Thanks.

You drag the clip from the browser to the clip on the timeline. Wait till the timeline clip goes white. Drop it and pick from the menu that appears the replace option you want.

How do I move music files from the startup disc to iTunes in the other internal hard disk os 10.5.8?

How do I move music files from the startup disc to iTunes in the other internal hard disk os 10.5.8?
The music I want to move was in iTunes but is now just files. I had to reinstall a new iTunes and lost all my old music.
Thank you!

That article is about using your iPod as an external hard drive, to move files from one computer to another computer. It is not related to your question.
You can't use iTunes to move song files from iPod to computer, except for songs you purchased from the iTunes Store (and you can also re-download purchases). However, there are third-party methods and utilities that can move song files from iPod to computer. If you do a Google search on something like "ipod transfer," you should get some links.
Once the song files are on your current computer, add them to that computer's iTunes library by dragging the files (or folder containing the files) to the iTunes window. After confirming everything is there (and fixing the data issue you mentioned) you can sync the iPod. You may want to do a Restore on the iPod, if it might have a data corruption issue, which will erase the iPod's hard drive, re-install the latest software, and set it to defautl settings.

Is it possible to set a default music player for the music on my external hard drive while still keeping my iTunes the default player on my Mac ?

Is it possible to set a default music player for the music on my external while still keeping my iTunes the default player on my Mac ?
Message was edited by: Pellseidon

There is no setting in the iPhone to set another default music player. The default is Music. If you are using another application, you are at the mercy of how that application operates as far as what occurs when it stops or errors out. The car is looking for music to play.

I can't find how to apply sound enhancements (EQ) for the podcasts now with iOS 6.0 update

Dears at Apple:
I can't find how to apply sound enhancements (EQ) for the podcasts now with iOS 6.0 update on any of my devices(iPhone 4s, iPhone Touch (4th Gen), iPad (3rd Gen). Most of the "Podcasts" I listen to are music content based and wanted to apply sound enhancements(EQ) like before when integrated with ipod function. Can you consider to "fix" this issue?
Many Thanks!

OK Emanuel I found a solution! I dowloaded and installed "Denon Audio" app from the iTunes store & it works great! It has an EQ you can set curves on manually or use the (few) built in pre-sets. It is a player like the Music app that comes with the iPhone, etc. but restores the EQ functionality so we can adjust the audio of PODCASTS:-) Until Apple fixes this what I consider a bug I will be using the Denon app as my default music player!

How do I suggest an accessory for the 2nd gen nano?

I'm trying to make a suggestion to Apple to make a belt clip for the 2nd gen nano like the older 40gb iPods had. How do I make one, because I can't find any sort of suggestion box(for lack of better term)

You may be able to use the apple iPod feedback form
to make that type of suggestion. You might also want
to check other sites that make iPod accessories to
see if they have one that you may like.
http://www.apple.com/feedback/ipodnano.html
Thank you!=)

How to apply transitions between clips in the same track?

Hey guys,
I'm in Uni on Final Cut Pro 5 and all the videos and discussions tell of how to apply transitions between clips in the same track.
I like to have my clips on different tracks so that I can overlap them at specific points but I don't know how to do this?
If I have track one. . .which ends. . .and have track 2 beginning below that (and have it overlapped for a few seconds) I don't know how to enable the transition at the point where track 2 begins.
Can anyone help?

Yep I understand that.
Let's say I overlap track 2 as I don't like the beginning of it. . .so I want the transition from the end of track one to track two to occur in the middle of track 2 - should I just trim the track to the point I want the transition to occur as opposed to have it overlapping?

Making stills from clips for the drop zone

How do I make a still picture from an iMovie clip for the drop zone and paste it to the drop zone?

this option is available in iMovie under create still frame from the edit menu. then from there "save frame as" ... i use jpeg.
Like this:
From there you simply drag and drop the jpeg to iDVD.
Good luck and hope this helps. If so, please take the time to mark your question as "Answered."
SDMacuser

How can I retrieve music tracks from the cloud?

I deleted music from my library expecting it to now be available in the cloud.
When I search in purchased items in iTunes and click on the item, it tells me that the original file is no longer available.
I am not expecting the file to be available just the music track/album etc.
How can I retrieve music tracks from the cloud?

Hello, GregMarshall05.
Thank you for visiting Apple Support Communities.
Here are the steps on how to download your past purchases.
Download past purchases
http://support.apple.com/kb/ht2519
Cheers,
Jason H.

We have 4 iphones in our family and an Ipad. When we purchase music I would like for the entire family to be able to use it. Should each of us use a different apple account or should we use the same one.

We have 4 iphones and an Ipad in our family. When we purchase music, I would like for the entire family to be able to use it and then back it up to Icloud. What is the best and cheapest way for this to happen. Should we all have a different apple id or should we use the same one.

You will all need to be on the same itunes account ID.
You can however all have seperate icloud accounts aswel.

BODS 3.1 : How to trigger an email alert for the jobs on BODS server ?

Hi All.
I have this request.
BODS 3.1 : How to trigger an email alert for the jobs on BODS server ?
We have jobs scheduled on BODS running smoothly and absolutely fine.
But to check, i am logging into the admin console and check for the jobs status.
I would like to have an email to be received from BODS after each job is finished.
It could succuessful. Or it could fail.
Whatsoever, i wish to receive an email alert as soon as a job is finished.
Can anyone advise me as to whether this could be made possible.
And if yes, how this could be done.
Thanks for your help in advance.
In BOE CMC / for webi / schedule / we find an option to send email for a job success or a job failure.
Is there any option similar to that in BODS ?
Also would like to know :
how to use the smtp_to or mail_to functions ?
how to set up the smtp server for this ?
thanks
REgards
indu
Edited by: Indumathy Narayanan on May 31, 2011 3:47 PM

Hi.
Since am new to this BODS. I need some help.
I already have many jobs which are running absolutely fine.
And when a job runs, and finishes, am able to see the trace saying
e.g. :
Job_abc is completed successfully.
We got the smtp service activated for our test server.
and we hae a group email id.
I have put the details of the smtp server / ip address / and said apply restarted.
The i created a simple test script as below :
print (' Before email ' );
smtp_to('abc@company_name.com', 'Job ' || job_name() ||' on ' || host_name() || ' has FAILED',
' the job has failed', 0, 0);
print('After Email ');
It does send a email to as per smtp_to whatever email is specified.
But how to differentiate between a job success
And a job which has failed.
I wish to have a mail which says on the subject :
'Job ' || job_name() ||' on ' || host_name() || ' has completed successfully'
==> IF it is a success
OR
'Job ' || job_name() ||' on ' || host_name() || ' has failed'
==> if it has failed
How to make the system identify, whether
to send a success message or a error message whatever
Could anyone advise.
thanks
indu

How to set up automatic payment for the purchase order

Hi, All,
I have one question how to set up automatically payment for the Rent Office purchase Order?
There is the requirement from the client. They want to create one kind of purchase order for the Office Rent, then pay the fees in the certain time of every month to the vendor for the rent fees without any invoice. Whatu2019s the normal solution for this kind of purchase order? Is it ERS? Or something else?
Please give me the details and business flow. Also please tell me how to setup in the SAP and T-code.
Thanks in advance

Either you can set up ERS or you can pay directly from the FI side.
Prerequisites
Evaluated receipt settlement must be flagged in the purchase order item.
The vendor must be flagged as being subject to ERS in the vendor master record.
The goods receipt must refer to a purchase order.
Goods-receipt-based Invoice Verification must be defined for the purchase order item.
A tax code must have been maintained in the purchase order item.
The order price of the materials may not be an estimated price.
If you flag a vendor as being subject to ERS, the system sets the ERS indicator as a default in each item when you create a purchase order for the vendor. You can prevent this happening for certain vendors by flagging the info record for the material and the vendor as not being subject to ERS.
In Purchasing, you can delete the default ERS indicator in a purchase order item.
Choose Logistics Invoice Verification ® Automatic Settlement ® Evaluated Receipt Settlement (ERS).
The selection screen appears.
You can use the following criteria to narrow down selection of the transactions to be settled:
Company code
Plant
Goods receipt posting date
Goods receipt document
Fiscal year of the goods receipt
Vendor
Purchase order and order item
You can define the selection criteria for the invoice documents by:
Delivery
Purchase order
Purchase order item
Goods receipt document
Credit memo
Invoice
Currency
Choose Execute.
The system issues a log for Evaluated Receipt Settlement, which displays the following:
Settled
In line with your selection criteria, the system displays all the order items that were settled (or if you are working in test mode, which would have been settled).
Could not be settled
In line with your selection criteria, the system displays all order items for which ERS is defined but could not be settled. It also lists the reasons.
If the system reports being unable to invoice a transaction, you should exclude the transaction from ERS to avoid it being included in the log the next time ERS is run.
Select the item and choose Exclude from ERS.
The system also generates and possibly sends a message to inform the vendor(s) about the transaction settled, depending on the settings in Customizing.
You can display the following environment information for the order items selected. To do this, choose Goto ®:
Display purchase order
Display invoice
Display material document
Display long text

How to strech a music clip for the Entire video

Similar Messages

Maybe you are looking for