How to subscribe to iChat?

I have just recently decided to avail myself and my students with the iChat program. I was under the impression that it was free to use. Either I was mistaken or I am not following the proper steps. Is this a free service and if so, how do I register and use it? Thank you.
Terrance

Like this http://www.siriusaddict.com/ichat.html
Or this http://www.ralphjohnsuk.dsl.pipex.com/page2.html
3:50 PM Tuesday; September 11, 2007

Similar Messages

  • Kichat: How do I get iChat 3 working ? Upgrade hints, FAQ

    Disclaimer: Apple does not necessarily endorse any suggestions, solutions, or third-party software products that may be mentioned in the topic below. Apple encourages you to first seek a solution at Apple Support. The following links are provided as is, with no guarantee of the effectiveness or reliability of the information. Apple does not guarantee that these links will be maintained or functional at any given time. Use the information below at your own discretion.
    How do I get iChat 3 working ? Upgrade hints:FAQ
    Trouble Shooting Revisited
    Ok We will start with loading Tiger and iChat version 3.0
    From Panther
    There are or were serveral Add-ons and applications avaiblable to Panther users of iChat that are not compatible with iChat 3.
    These following need to be deleted.
    iCAR - An Add-on that posts an Auto response Away message (produces a 1 fps result in a Video chat)
    Virex for Panther - An Anti Virus app avialable to @mac account users (Produces the 1 fsp problem)
    iChatUSBCam for Panther/iChat2.x - A Add-on utility for using iSight or USB cam with iChat2.x (Incompatible with Tiger/iChat 3)
    iProfile - An Add-on for producing a profile on the AIM server that ichat 2.x could not do (not proven to be a problem but now not needed).
    A clean install of Tiger (not Archive and Install) produces the best results.
    But any install should also check these Tiger settings.
    First, UPGRADE to 10.4.3 as this gets past many Connection issues that became apparent with the basic Tiger (10.4) and iChat 3.0 It updates iChat to version 3.1
    Check Settings
    Don't be complacent that you have not set anything different.
    There are several new things in Tiger that may trip you up.
    These are worth looking at:
    Mac Firewall. Now includes the ability to Block all UDP traffic in the Advanced button (System Preferences > Sharing >Firewall tab then the Advanced Button).
    Also can now open UDP protocol for ports where as the Panther one only did TCP (Check any old Panther settings you Added to the presets).
    The ports should be:
    TCP -5190
    UDP -5060, 5190, 5678, 16384-16403
    There are more ports for Bonjour 5297, 5298, 5353 UDP and 5298 TCP and Jabber, 5220, 5222, 5223 on TCP)
    (Table View see 7th Sept)
    QuickTime. This has a change in the name of the Connection Speed tab to Streaming (System Preferences > QuickTime) Check this is set to be equal to your connection speed (the download one if this is faster). See Apple Doc 301641 Dated 9th November 2005.
    Date & Time. Not conclusively involved but worth eliminating. Set a Network Server and the correct Time Zone.
    Apple Remote Desktop. If this is active in System Preferences > Sharing > Services tab it causes problems for iChat.
    Next, test the actual speed you are getting from your ISP.
    http://www.dslreports.com/stest
    There is a table here of the speeds you need:
    http://docs.info.apple.com/article.html?artnum=301050
    The one you get linked to in the Help menu is wrong.
    Other Known Problems
    There are several other applications that iChat 3 does not seem to like.
    folding@home This is a application that uses spare processor time to help find protein chains for a University.
    PostgreSQL This is a data base application that can be reset to allow more processor time for iChat. See here http://www.murraywilliams.com/blog/archives/000046.html
    Lotus Notes Some people have reported problems with this.
    Make sure any Add-on Video cards or input PCI cards have up to date Firmware
    IF you are still having problems I would do Routine Maintenance Tasks as laid out here.
    Lastly, some routers/modems are SIP aware and give different results in iChat 3 compared to iChat 2.
    This is due to the Operating System changing (like a new computer connecting to the modem) rather than iChat.
    See My web pages: page4 at the SIP Text in a Box section.
    Also for the above try some housekeeping particularly if you do not keep your Computer on 24/7 Gulliver, "kmosx3: Mac OS X 10.3/10.4: System maintenance"
    Ralph
    Do you want to provide feedback on this User Contributed Tip or contribute your own? If you have achieved Level 2 status, visit the User Tips Library Contributions forum for more information.

    i think apple needs to keep up with the jones here, so far i read at LOGIC PRO FORUMS many saying cubase and pro tools left logic in the dust, 1 year ago already, sad, but true
    in anycase, trye starting one app before the other to see which combination works., other wise i think more apps will fall out of sync with old logic pro

  • How do I reset iChat and Facetime on an Air so I can  basically start fresh?

    How do I reset iChat and Facetime on my Air.  When I bought it we had everything on my husbands MacBook put on the Air.  All the iChat and Facetime setting are his so the Air and MacBook won't iChat or Facetime with each other.

    Remove their preference files in the /Home/Library/Preferences/ folder.  Remove any related folder in /Home/Library/Applications Support/ folder.  Relaunch each application and reconfigure.
    Check the rest of the computer for other inconsistencies.  For example, the Computer Name in Sharing preferences may need to be changed.  Settings in Accounts preferences for the long name, account name, and password.  Changing the account name is quite complicated.
    If you truly wish to start fresh then erase the drive and reinstall from scratch.

  • How can I get IChat contacts on my IMessage?

    Hi, so I just got my new mac and I was very excited to start Ichatting. However, Ichat has been replaced by Imessage. I have a few questions regarding this. Is there a way for me to unistall imessage and get Ichat instead? If not, then how can I add IChat contacts to my Imessage. My sister is at university and she has IChat and I have IMessage and it wont let me message her because it says she is not signed up for IMessage. How can I make my Imessages connect to her Ichat?

    As Niel said, if it's a first generation iPad, you cannot update it past iOS 5.1.1.
    But if Facebook still offers their old app for that old iOS, here is how to get it:
    http://support.apple.com/kb/HT5919

  • How do i use ichat for the 4gs, how do i use ichat for the 4gs

    i would like to know how to start using ichat on my new 4gs ?

    Hi,
    There is no iChat on the iOS 5 devices
    However iChat on a Mac can send SMS messages to a Phone - Providing the computer  thinks it is in the United States and the Phone is serviced by a USA Carrier that takes part in the AIM Forwarding service.
    8:07 PM      Saturday; October 22, 2011
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb( 10.6.8)
     Mac OS X (10.6.8),
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

  • How do I change ichat from AIM to MSN on my macbook

    I'm trying to figure out how to switch my ichat from AIM to MSN.

    Hi,
    Natively you can use names vaild with AIM (AIM, @Mac.com a MobileMe) and Jabber IDs including Googletalk ones in iChat.
    There is a way to get to Text chat to MSN Buddies via a Jabber ID and what are called Transports.
    The Instructions are here
    11:09 PM      Saturday; June 4, 2011
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb( 10.6.7)
     Mac OS X (10.6.7),
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

  • HT204053 if i have an Apple ID associated with a hotmail account...how do I use IChat?

    i am learning how to set up IChat and have an Apple ID associated with a hotmail acct. Do I need to set up a mac.com or me.com acct in order to use IChat?
    or if I had an old AIM acct how do recover that password?

    Welcome to the Apple Community.
    In order to change your Apple ID or password for your iCloud account on your iOS device, you need to delete the account from your iOS device first, then add it back using your updated details. (Settings > iCloud, scroll down and hit "Delete Account")

  • Kichat: How do I get iChat 3 working ?

    An Update to http://discussions.apple.com/thread.jspa?threadID=278760 Line To be removed on Posting if Accepted
    How do I get iChat 3 working ? - Upgrade hints:FAQ
    Trouble Shooting
    This Post deals with Updating iChat 2 in Panther to iChat 3 in Tiger
    NOTE:- What is said here was found out at the time Tiger was released and the info may not be transferable to any other OS Upgrade such as Tiger to Leopard
    Ok We will start with loading Tiger and iChat version 3.0
    From Panther
    There are or were several Add-ons and applications available to Panther users of iChat that are not compatible with iChat 3.
    These following need to be deleted. I am not supplying links here as you don't need them.
    iCAR - An Add-on that posts an Auto response Away message (produces a 1 fps result in a Video chat)
    Virex for Panther - An Anti Virus app avialable to @mac account users (Produces the 1 fsp problem)
    iChatUSBCam for Panther/iChat2.x - A Add-on utility for using iSight or USB cam with iChat2.x (Incompatible with Tiger/iChat 3)
    iProfile - An Add-on for producing a profile on the AIM server that ichat 2.x could not do (not proven to be a problem but now not needed).
    A clean install of Tiger (not Archive and Install) produces the best results.
    But any install should also check these Tiger settings.
    First, UPDATE to 10.4.3 as this gets past many Connection issues that became apparent with the basic Tiger (10.4) and iChat 3.0 It updates iChat to version 3.1 (it also mentions the Virex issue)
    Check Settings
    Don't be complacent that you have not set anything different.
    There are several new things in Tiger that may trip you up.
    These are worth looking at:
    Mac Firewall. Now includes the ability to Block all UDP traffic in the Advanced button (System Preferences > Sharing >Firewall tab then the Advanced Button).
    Also can now open UDP protocol for ports where as the Panther one only did TCP (Check any old Panther settings you Added to the presets).
    The ports should be:
    TCP -5190
    UDP -5060, 5190, 5678, 16384-16403
    There are more ports for Bonjour 5297, 5298, 5353 UDP and 5298 TCP and Jabber, 5220, 5222, 5223 on TCP)
    See this Apple Doc Formerly Article: 93208.
    That info coverts into a table like this
    QuickTime. This has a change in the name of the Connection Speed tab to Streaming (System Preferences > QuickTime) Check this is set to be equal to your connection speed (the download one if this is faster - *Preferably 1.5Mbps* ). See Apple Doc 301641 Dated 9th November 2005.
    Date & Time. Not conclusively involved but worth eliminating. Set a Network Server and the correct Time Zone.
    Also check it matches any similar setting in your Modem and router
    Apple Remote Desktop. If this is active in System Preferences > Sharing > Services tab it causes problems for iChat.
    Next, test the actual speed you are getting from your ISP.
    http://www.dslreports.com/stest A range of Speed Test sites can be found here
    There is a table here of the speeds you need:
    iChat 3/Tiger (OS 10.4) Speed requirements
    The one you get linked to in the Help menu is wrong.
    Other Known Problems
    There are several other applications that iChat 3 does not seem to like.
    folding@home This is a application that uses spare processor time to help find protein chains for a University.
    PostgreSQL This is a data base application that can be reset to allow more processor time for iChat. See here http://www.murraywilliams.com/blog/archives/000046.html
    Lotus Notes Some people have reported problems with this.
    Make sure any Add-on Video cards or input PCI cards have up to date Firmware
    IF you are still having problems I would do Gulliver's Routine Maintenance Tasks as laid out here.
    Lastly, some routers/modems are SIP aware and give different results in iChat 3 compared to iChat 2.
    This is due to the Operating System changing (like a new computer connecting to the modem) rather than iChat.
    See My web pages: page4 at the SIP Text in a Box section. This has moved on somewhat since Tiger came out with Thomson-Alcatel brining out newer firmware version that are mentioned later in that section.
    Also for the above try some housekeeping particularly if you do not keep your Computer on 24/7 Gulliver's, "kmosx3: Mac OS X 10.3/10.4: System maintenance"
    Updated 21st June 2008
    I may receive some form of compensation, financial or otherwise, from my recommendation or link.
    8:35 PM Saturday; June 21, 2008

    i think apple needs to keep up with the jones here, so far i read at LOGIC PRO FORUMS many saying cubase and pro tools left logic in the dust, 1 year ago already, sad, but true
    in anycase, trye starting one app before the other to see which combination works., other wise i think more apps will fall out of sync with old logic pro

  • How do I find iChat on my new MacBook Pro?

    Can anyone help me with finding how to get to iChat on my newest MacBook Pro?  I believe it's now been replaced by iMessage, but I can't figure how to video chat on this laptop.

    Can anyone help me with finding how to get to iChat on my newest MacBook Pro?  I believe it's now been replaced by iMessage, but I can't figure how to video chat on this laptop.

  • TS2774 How to subscribe a cellular data service in Iphone 4s

    How to subscribe a cellular data service in Iphone 4s

    If you did not edit the Cellular Data Network settings on your iPhone and you are unable to use Cellular Data Network services, try turning off and then turning on iPhone. If the issue persists, contact your carrier about the availability and provisioning of these services on your wireless account.

  • HT2020 How can I use ichat or face time for video conference to window computer?

    How can I use Ichat or factime to video conference remote famiy members who have windows computers?

    HI,
    You can use iChat to Video to PCs that are using the AIM for PC app or have the Trillian App with the Pro Add-on (which costs).
    As you list OS 10.7.4 you may find you can find a copy of the Messages Beta  (technically it was withdrawn before the release date for Mountain Lion that has the Full version)
    Although this Users Tip was written a while ago it may also pay to read it
    https://discussions.apple.com/thread/1968438?threadID=1968438  (It is not always as smooth as it should be)
    9:32 PM      Wednesday; August 8, 2012
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
      iMac 2.5Ghz 5i 2011 (Lion 10.7.2)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

  • Two questions:  how do Skype and iChat compare for group video?  quality, reliability, cost, etc are important.  2) Is my MobileMe ID what I need to use in the window in making an iChat buddy?  It only says AIM above the window, online tutorial differs.

    Two questions:  1) How do Skype and iChat compare for group video?  Quality, reliability, cost, etc are important.  2) Is my MobileMe ID what I need to input in the window in making an iChat buddy?  It only says AIM above the window, online tutorial differs, saying MobileMe, AIM, GoogleTalk (Jabber) all work. Thnx

    Hi,
    IChat uses better Video Compression than Skype does.
    On a top flight Mac you can send a 640 X 480 pixel frame up to 30 frames a sec.
    Skype can't match this.
    iChat in Video is Peer to Peer. (you can actually Log out of the Buddy list)
    Skype seems to borrow something from everyone's bandwidth to make connections.
    What do you mean by Business account Tracking ?
    iChat Adds (or can add) the First Name, Last Name of your Buddies and create an Address Book Entry
    Whether you mark those cards connected with a  company is up to you.
    (I have heard of issues with earlier version of iChat and the Address Book that "saw" the Company Name as the part of the Name and linking several Screen Names to the one name
    Audio on a Mac using Skype tend to be the same as the streaming needs are less.
    However you have to rely on any PCs audio abilities from PCs which may not be to the same standard.
    Mac to PCs in iChat and AIM can be difficult though.  (It should work but it rarely as simple as Plug and go)
    Skype may suit your needs better on ocassions.
    9:11 PM      Thursday; May 5, 2011
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb( 10.6.7)
    , Mac OS X (10.6.7),
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

  • How to Subscribe to Outlook Calendar in Group WIKI Calendar

    Ok, here's what I've been trying to figure out how to do for about a year.  Our small office uses PC's with Outlook as our Calendar.  We are not on Exchange Server.  We are using Mac Mini Snow Leopard Server ver. 10.6.8. I'm trying to figure out a way so that our office can look at one central calendar and see individual calendars for each of the users.  I don't want all the users to have their events/appointments on 1 calendar because then you can't tell whose event/appointment it is.   I've setup a Group WIKI and have activated the Calendar and have a group consisting of the attorneys assigned to the Group.  Outlook 10 can publish its calendar as to a webdav server.  In fact I'm able to subscribe to my Outlook Calendar once its been published in the iCal client on the Snow Leopard server.  It updates in both directions when changes are made.  The problem is that when I go into the Group WIKI Calendar, although I can create calendars there and then PUBLISH them so they can be Subscribed to in either iCal or in Outlook 2010, I can't figure out how to SUBSCRIBE to a webdav/caldav calendar, ie. the Outlook 2010 that's been published, in the WIKI Calendar.  Thanks for your help.

    Hello,
    I'm afraid I'm not familiar with the specific intricacy of your situation (a hosted domain at Outlook.com), and so do not know if indeed that is causal to your issues. But perhaps a workaround will be useful? For example, if you indeed use your hosted domain for your email, but create a true Outlook.com account for the use of only Calendar and Contact synchronization, then that might work?
    You can find complete instructions here:
    http://supportforums.blackberry.com/t5/General-BlackBerry-10-Smartphone/How-To-OTA-Sync-BB10-and-non...
    For your email account, you simply use the domain they are hosting, and for Contacts/Calendar, the true Outlook.com account that you create for that purpose.
    Good luck!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • How to subscribe newsletter code  in flex

    Hi guys,
                    Basically I need how to subscribe newsletter to everyone with flex code so plz giveme the code how can we done with flex code.

    Hi,
    Please click on the mark occurrences button. You can find
    this button in the same line as the Run and Debug Flex project
    buttons.
    Hope this helps.

  • How can I use ichat on my macbook pro to send messages to my iPod 5

    How can I use ichat on my Macbook Pro to send messages to my iPod 5 ?

    If ipod 5 means ipod touch or iphone 5, simply create a AIM account and download the AIM iphone app. iChat and iMessage aren't compatible.

Maybe you are looking for

  • Getting error message "Can't tune to channel"

    Like the title says, I get an error message saying my box can't tune to any channel, earlier the tv was working fine, then the video went out but we could still hear the channel. Next the audio went out as well. Auto fix doesn't solve the problem, an

  • Problem in file adapter @ receiver end

    Hi , I am using file adapter @ receiver end using content conversion. Using field separator as 'nl'. When i open file in Hex mode it's showing the field separator as 2 Cariage returns(CR) & 1 line feed(LF). But the requirement is only 1 CR n 1 LF . A

  • VISA Find Resource primitive runs much slower on OS X compared to Windows

    Hello Everyone, We have a large application that is built with LabVIEW 2014 64-bit that calls the "VISA Find Resource" primitive in a While Loop as the basis for automatic hardware discovery. On Windows, everything works fine. However, we just starte

  • Group policy failes to push ccmsetup on all computers

    I have exported ConfigMgrADMTemplates in GPO. Computer Configuration-policies-Administratie Templates- Classic Administrative Templates- Configuration Manager 2012-Configuration Manager 2012 Client I have enabled Configure Configuration Manager 2012

  • Getting Assertion Failed Message..(Experts urjent help plz)

    Hi all We are migrating 4.5 forms to 10g. In one of the 10g converted form, i have a push button calling another form which is not available.(i dont have any other code, just a call_form) say, call_form('abcd.fmx'); when i run the form and click the