How to supply identity information for my newly created website?

I am ready to provide you the information regarding my website.

Identity information is only available if there is a secure HTTPS connection and not for a HTTP connection.
See [[Site Identity Button]]

Similar Messages

How to avoid QM status for a newly created ODS Request be a Warning

Hi Experts,
I AM using 3.5
When I Execute my infopackage lo load a complete load data for an ODS, the QM status of the Request is a warning.
The monitor says no problem or warn for the load.
I can manually turn it into green and activate the data but i can not put it all in a process chain c'ause the activation can not be done without the manual turning into green.
Is there any step in the chain that can turn ir into green or a way to set it created in green? In the IP i have the warnings threatment as judged to be succesful...
Thanks!!!

Hi,
If you want to use an ODS object as a data source for another ODS object or InfoCube, you have to make sure that the data is of good quality, and that it is active in the system.
If you choose the main menu path Environment ® Automatic Request Processing, the system automatically sets the quality status to OK after the data has been loaded into the ODS object. This option must be switched on. There is also the option of activating and updating ODS data automatically. Here, data that has been given the quality status OK is transferred from the activation queue into the active data table, and the change log is updated. The data is then updated into the connected data targets.
http://help.sap.com/saphelp_nw04/helpdata/en/fb/0025391d4f000be10000000a114084/frameset.htm
Please do the above , for more clarity please go through the link give . it is nothing to do other than setting quality status ok
Thanks
BVR

RSRV not showing number of record for the newly created cubes

In RSRV Elementary tests i execute database information for a newly created cube.It is executed fine and it is showing the no of dimensions and line item dimensions but it is not showing the diff tables E,F.... I tried refreshing the statistics of this cube in the manage and did check statistics aswell.But it is still the same.and I tried in the program SAP_INFOCUBE_DESIGNS it is showing for all the cubes except for the newly created once.
Is there any settings as such.
Let me know ASAP

Hi Ninad,
Use the program SAP_INFOCUBE_DESIGNS and get the cube size in bytes.
Transaction se16 -> fact table name, /bic/f[infocube name] and /bic/e[infocube name] or /bi0/f.. and /bi0/e for business content infocube, click 'number of entries' - This is for no. of records.
Transaction DB02 -> 'detail analysis' -> object name = [infocube name]
Function Module - RSDU_INFOCUBE_TABLE_SIZES_INF
Bye
Dinesh

After starting my computer today and trying to visit and open bookmarked web sites, I cannot open them because I am getting this error message: This web site does not supply identity information. What happened? How do I fix it? Thanks

Today, when I tried to open web sites in Firefox from my Bookmarks, I could not. I continually received the following error message: This web site does not supply identity information.
I noticed that when I put the cursor on the box to the left of the address, that message appears. There is also '''no''' https:// before the address.
Can anyone help correct this problem? I believe sometime last week I may have fiddled with the Secutity settings in the Tools/Security option box and may have screwed up something trying not to have sites use cookies to track me?
Thanks,
Bob

You can set the pref browser.urlbar.trimURLs to false on the about:config page to see the http: protocol.
You can set the pref browser.urlbar.formatting.enabled to false on the about:config page to disable the highlighting of the domain and see the full URL more clearly.
*http://kb.mozillazine.org/about:config
A possible cause is security software (firewall) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
See:
*https://support.mozilla.org/kb/Server+not+found
*https://support.mozilla.org/kb/Firewalls

How to find table information for a datasource?

Hi,
Can you please tell me how to find table information for a datasource. I am not getting much help from help.sap.
I am trying to find table information for below datasources. We are creating DSO's for the below mentioned datasources, for some we have standard DSO's(0WBS_O06), for others I am trying to create
0CO_OM_NWA_1,
0CO_OM_NWA_2,
0CO_OM_WBS_1,
0CO_OM_WBS_6
Please help me.
Regards,
Bob.

Hi BOB,
Another option to find the table information...
inorder to get the tables names involved in that particular data source follow the below steps.
1) ST05 --> activate the Trace
2) RSA3 --> enter your data source (for ex: 0CO_OM_NWA_1)
3) Execute
4) Now goto ST05 -> deactivate the trace
5) click on Display trace(F7) button
6) Execute
7) It will display the complete SQL trace
8) Now from the Menu "Trace list" --> select "Combined Table Access"
it will display the complete tables list involved in that data source...
From Table name section you can get the list of tables involved in that data source.
I had traced and took the information of tables involved in that data source 0CO_OM_NWA_1
0CO_OM_NWA_1
AFKO     Order header data PP orders
AFVC     Operation within an order
AUFK     Order master data
COSP     CO Object: Cost Totals for External Postings
COSPP     Transfer of the Order in the COSP Table to the Project
COSS     CO Object: Cost Totals for Internal Postings
COSSP     Transfer of the Order COSS Table to the Project
COVREF     Coverage Reference Table: All Processing Blocks
COVRES     Table of Coverage Results
You can follow the same steps and find the tables for the rest.
Regards
KP

How to get this information for Conky

Hi people,
My question is how to get this information for show in Conky:
- KDE version.
- Last sync (pacman -Sy) and Last update (pacman -Su)
For the first point could be use a script that execute $ kdesu --version and get information from there.
I have no idea how get information from pacman (may be logs?).
Any ideas?
Thank you.

I have had tremendous success with LUA in Conky on Arch. And all you need to to is put the text HI after the "TEXT" line. ^^;
Examples of my LUA usage:
http://fc02.deviantart.net/fs71/i/2010/ … usLink.png
http://kittykatt.silverirc.com/screens/conky-HUD.png
EDIT: Also, I've had success with getting the KDE version by doing the following...
kwin --version | awk '/^Qt/ {data="Qt v" $2};/^KDE/ {data=$2 " (" data ")"};END{print data}'
This is the method I'm currently using in screenFetch. Tested it a couple of times myself, but besides that, I'm not sure if it will work or not.
Last edited by kittykatt (2010-04-22 17:52:25)

After installing 3.6 Firefox, I get this message "This website does not supply identity information. Your connection to this website is not encrypted"

After installing Firefox 3.6.13 (auto install) I am getting the following error if I open a page with-in
About Blank page - clicking on it give this detals
"This website does not supply identity information.
The connection to this web site is not encrypted"

You can set the browser.urlbar.formatting.enabled pref to false on the about:config page to disable the highlighting of the domain and see the full URL more clearly.
You can set the browser.urlbar.trimURLs pref to false on the about:config page to see the http: protocol on the location bar and in the pop-up if you hover a link.
*https://developer.mozilla.org/en/Mozilla/Preferences/Preference_reference/browser.urlbar.formatting.enabled
*https://developer.mozilla.org/en/Mozilla/Preferences/Preference_reference/browser.urlbar.trimURLs
*https://support.mozilla.org/kb/Site+Identity+Button
*http://blog.mozilla.org/ux/2012/06/site-identity-ui-updates/

How to change billing information for my annual subscription as the chart through which I was paying

The option that gives me my brand Subscription error and I can not make changes.

It solved the problem of changing the credit card for payment of a subcripción.
thanks
Date: Wed, 18 Jul 2012 14:22:59 -0600
From: [email protected]
To: [email protected]
Subject: How to change billing information for my annual subscription as the chart through which I was paying
    Re: How to change billing information for my annual subscription as the chart through which I was paying
    created by David__B in Adobe Creative Cloud - View the full discussion
Hi Beto, What information are you attempting to change (address, credit card)? What is the error message you are getting? Would it be possible to post a screen shot of the error? -Dave
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4565913#4565913
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4565913#4565913. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Adobe Creative Cloud by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

How do I recover a password just newly created on a new i-pad?

How do I recover a password just newly created on a new i-pad? I took note of the password created but it won't recognize it.

I actually don't remember the initial process, since it happened like 15 days ago. All I kow is that I have followed the steps when i have turned it on for the first time, I remember creating an apple account, passoword, etc, but is the account password the same to unlock the i-pad? Does it come with a standard intial (default) code? Thanks!

How to add network information for failover zones with logical hostname?

Hello!
As stated in [http://docs.sun.com/app/docs/doc/819-3069/ds_template-21?a=view] I must not configure network addresses for a zone when I manage these with a logical hostname:
If you require the SUNW.LogicalHostName resource type to manage all the zone's addresses, configure a SUNW.LogicalHostName resource with a list of the zone`s addresses and do not configure them by using the zonecfg utility.But when I start the zone for the first time using "zlogin -C" it does not ask me any questions about the network. Of course, there is no adapter configured. But how do I add information like routes or nameservers to the system when using a logical hostname?
TIA
Stephan

Hi Stephan,
I can only assume that when the zone was configured via zonecfg without any network interfaces that sysidcfg did not ask you for the default route or name service, as such you will need to setup those parts up manually.
Please take a look at the FAQs for zones, i.e. http://opensolaris.org/os/community/zones/faq/ in particular
http://opensolaris.org/os/community/zones/faq/#u5
http://opensolaris.org/os/community/zones/faq/#cfg_defroute
Finally, if you require a NIS client then please see http://docs.sun.com/app/docs/doc/816-5166/ypinit-1m?a=view
Regards
Neil

How to edit "license information for multiple logon" screen

hey gurus
i need to know how to edit or modify the 'license information for multiple logon" screen. this screen usually pops up when a user tries for a multiple logon to sap. We have activated the parameter 'login/disable_multi_gui_login' but we would like to modify the screen in such a way that only one radio button which says 'terminate this logon' should exist. we would prefer to remove the option of 'continue with this option and end any other logon'. Now i searched but i could not find anything to implement this so i am here and i need your advice and suggestions.
thanks in advance.
cheers.
nate

hey bernhard
many thanks for your reply..i appreciate your help. its just that its not explicitly mentioned we cant modify the screen in the note.
Is there any other note that specifically say so?
thanks for your time buddy.
regards

How to suppress License Information for multiple logon screen?

Hi,
While LOGIN we will get "License Information for multiple logon screen" will displayed.
How to suppress that screen.
Regards,
Bala

>
bala virupaksha wrote:
> Hi,
>
> While LOGIN we will get "License Information for multiple logon screen" will displayed.
> How to suppress that screen.
>
> Regards,
> Bala
and why would you want to do that?
does your contract with SAP say, that you may use multiple logins for free? would SAP's contract-issue department agree that -in your case- it's not necessary to record multiple logins?
have you read this part of the SAP license policy?
SAP gives express notice that the accessing of a system by more
than one person using one and the same named user constitutes
a breach.
tell me this does not apply to you ...

How to implement Personal Information for non supported countries

Hi,
Can anyone give me some tips on how to implement Personal Information ESS services for countries which are not supported by the standard business package. We need to implement for the following countries as well as a part of global implementation.
Cyprus
Czech Republic
Egypt
Ireland
Luxembourg
Monaco
Russia
Ukraine
Regards,
Subhadip

Hi Subhadip,
You need to the following customization settings in SPRO.
Personnel Management->ESS->Service Specific settings->OWn Data->Reuse Country Specific Application
Just follow the IMG documentation and it should be done. Basically we do,
1. Identify the Infotype and the country for which we want to re-use existing application (e.g Egypt).
2. Select the country from which you want to copy the screens (e.g. Australia, India)
3. Specify the "Use Case and Active Subtypes" for that country. Follow the documentation for this node.
4. Maintain country specific entries for services (in this case will add entries for the new countries added).
Hope this helps.
Regards,
Jigar

How can I protect formulae in a newly created spreadsheet without locking the whole sheet ?

How can I protect formulae from being overwritten on a newly created spreadsheet without locking the whole sheet ?

Olly,
I'll be picky here on nomenclature ;-)
Tables and other Obects can be locked, but Sheets can't be locked.
If you wish to shield some parts of your content from accidental modification, arrange your layout to put that sensitive content in tables separate from the tables that need to be accessed, and lock the sensitive ones. It's also possible, but rather clunky, to place shields over the sensitive area. A shield can be made by Inserting a Shape and positioning the shape over the sensitive area. With the shape selected, go to the Graphics Inpector and set the Opacity of the shape to zero. You will then be able to see through the shape but will no be able to Click through it to get at the cells below. This method is inconvenient because you have to worry about keeping the shape aligned with the table should the table need to change size or shape.
Jerry

ADF JS API methods not working for the newly created rows in table

Hi All,
We need to make sure the focus goes back to the newly created rows first column's first component.
Used findComponent and findComponentByAbsoulteId and even hard coded the id, but still the methods are returning null.
Even tried ADFRichTable.getRowKey(index), by passing index as 0 for the first row, still the method is returning null.
Tried ADFUITable.findComponent(Object scopedId, Object rowKey), but unable to pass client side rowKey as the above method is returning null.
All our requirement is to make the focus back to the first row's component when the user clicks on the cancel button instead of save button. Appreciate your help. Thanks.
P.S.: Rows will be created using CreateInsert method.
JDEV Version: 11.1.2.0.0 and Table is in a region and we are using UI Shell Tab Template to launch regions.
Raja.
Edited by: RajaRamasamy on Feb 10, 2013 4:30 PM
Edited by: RajaRamasamy on Feb 10, 2013 4:30 PM

Thanks Frank,
But some times even we use findComponentByAbsoulteLocator, its not working. So i followed the approach where you will get the rowID like the below and construct the client ID and pushing the JS to client using Service class. And it worked.
String rowId = table.getClientRowKeyManager().getClientRowKey(facesContext, table, rowKey);
But i am worried that even though we hard coded the client and executing the js function from the command button by keeping client listener's type as click, the focus is not setting. And i tried giving the id as tableId[rowIndex]:componentId in the findComponentByAbsoulteLocator.
Can you let me know is there another way to make focus only using JS on click of command button, where the button does not have any action or actionListener.
Raja.

How to supply identity information for my newly created website?

Similar Messages

Maybe you are looking for