How to Support IDS in ASA 5505 and 5520?
Dear All;
we have the following HW configuration for the ASA 5505 and ASA 5520, We need to add the Intrusion Detection System (IDS) functionality to both ASA. My question is: what is/are the module(s) required to support this function, and what is the deference between IPS and IDS, does the the same Module do the both functionality?
Part No
Description
QTY
ASA5505-BUN-K9
ASA 5505 Appliance with SW 10 Users 8 ports 3DES/AES
1
CON-SNT-AS5BUNK9
SMARTNET 8X5XNBD ASA5505-BUN-K9
1
SF-ASA5505-8.2-K8
ASA 5505 Series Software v8.2
1
CAB-AC-C5
AC Power Cord Type C5 US
1
ASA5500-ENCR-K9
ASA 5500 Strong Encryption License (3DES/AES)
1
ASA5505-PWR-AC
ASA 5505 AC Power Supply Adapter
1
ASA5505-SW-10
ASA 5505 10 User software license
1
SSC-BLANK
ASA 5505 SSC Blank Slot Cover
1
ASA-ANYCONN-CSD-K9
ASA 5500 AnyConnect Client + Cisco Security Desktop Software
1
Part No
Description
QTY
ASA5520-BUN-K9
ASA 5520 Appliance with SW HA 4GE+1FE 3DES/AES
2
CON-SNT-AS2BUNK9
SMARTNET 8X5XNBD ASA5520 w/300 VPN Prs 4GE+1FE3DES/AES
2
ASA5520-VPN-PL
ASA 5520 VPN Plus 750 IPsec User License (7.0 Only)
2
ASA-VPN-CLNT-K9
Cisco VPN Client Software (Windows Solaris Linux Mac)
2
SF-ASA-8.2-K8
ASA 5500 Series Software v8.2
2
CAB-ACU
AC Power Cord (UK) C13 BS 1363 2.5m
2
ASA-180W-PWR-AC
ASA 180W AC Power Supply
2
ASA5500-ENCR-K9
ASA 5500 Strong Encryption License (3DES/AES)
2
ASA-ANYCONN-CSD-K9
ASA 5500 AnyConnect Client + Cisco Security Desktop Software
2
SSM-BLANK
ASA/IPS SSM Slot Cover
2
Thanks in advance.
Rashed Ward.
Ok, I was not quite correct in my first post.
Those modules - only modules available for corresponding ASA models.
They all may act as IPS (inline mode) or IDS (promiscuous mode), depending on how you configure your policies.
When it acts like IPS, ASA directs all traffic through the module, so all the traffic is inspected and can be dropped inline if some signature fires.
When it acts as an IDS, ASA just copies traffic to the module for inspection, but actual traffic flow is not affected by the module, as it's not inline in this case.
Plus, those modules may be comdination of both modes. I.e. some traffic might be inspected inline, when some other (more sensitive) traffic can be inspected in promiscuous mode.
To understand this better, get familiar with this link:
http://www.cisco.com/en/US/docs/security/asa/asa84/configuration/guide/modules_ips.html
Similar Messages
-
Cisco ASA 5505 and DHCP Client Problems
Hi, i have a problem. I've connected my ASA appliance to an ADSL modem, and i dont get an DHCP address on the outside interface (e0/0). I use the asa-722-19.bin firmware.
I turned on the debugging for the DHCP client and could see that the ASA device was sending out broadcasts but a reply never came. Instead I connected the device to my internal network where the ASA got an address instantly.
I read somewhere that if I was to use ?ip address dhcp client-id fastethernet 0″, then I got an address from the ISP.
I tried looking for a similar command on the ASA5505 but I couldn?t find anything. I did however find a page on the Cisco site confirming my suspicions. It said some ISP?s require the client-id field of the DHCPDISCOVER request to be filled.
I've also read that this issue has beed fixed since a few weeks, now they have released version 7.2(2).22 where you can define ?dhcp-client client-id interface outside? in global configuration mode. Im running 7.2(2).19 and i cannot find any command like that in my appaiance. How do i fix my problem ? Or how do i get about recieving the 7.2(2).22 firmware update.
Regards !
LeifHi again! I thought I should share the solution that worked for me. I use software version 7.2(2) on this device. ASDM 5.2(2). In ASDM open configuration / Interfaces. Click in outside (my case 0/0) and press Edit. Then open the tab Advanced and set the correct Active Mac address. Fore some reason its empty by default and the ISP/modem don't like that. You will find the correct MAC address under the help menu / "About ASA". Im sure there is some another way to do this but this is a simple "how-to" that works with Swedens biggest ISP and their standard DSL modem.
When I used a Linksys DSL modem in bridge mode without the MAC address set I got an inside IP adress (192.168.x.x) from the modem to the ASA. After setting the MAC address I just had to do a renew and got the outside address right away. /Bjorn
(future users searchwords: no ip from isp, ASA 5505 and cable modem). -
Site to Site VPN between ASA 5505 and Cisco 800 router
Evening all,
Hoping that someboy can see the error of my ways. It seems very like the problem that i read here: https://supportforums.cisco.com/thread/2016300
We have a cisco 800 in a remote site which we wanted to use for a site to site vpn. Went through the steps on the ASA 5505 and the 800 and have got to the stage were the tunnel is up and connected. Getting traffic through it is another matter. Remote network is 172.20.224.0/20 and the server network behind the ASA is 192.168.168.0/24. The tunnel does intiate when you send traffic from 172 ......to 192....... Both the ASA and 800 report the tunnel is up. If i look at the stats using ccp on the 800 i can see the encapsulation packets graph shooting up but nothing cominbg back. I did packet captures on the 5505 and could not see anything coming from the tunnel so i dont belive its making it to the ASA. Here is the config from the 800:
Building configuration...
Current configuration : 6488 bytes
version 12.4
no service pad
service timestamps debug uptime
service timestamps log uptime
no service password-encryption
hostname hhp-sty-backup
boot-start-marker
boot-end-marker
logging message-counter syslog
logging buffered 4096
enable secret 5 $1$jI1i$/kZbRk2WHD5h0HtfuQVej1
aaa new-model
aaa authentication login default local
aaa authorization exec default local
aaa authorization auth-proxy default local
aaa session-id common
crypto pki trustpoint TP-self-signed-1347488939
enrollment selfsigned
subject-name cn=IOS-Self-Signed-Certificate-1347488939
revocation-check none
rsakeypair TP-self-signed-1347488939
crypto pki certificate chain TP-self-signed-1347488939
certificate self-signed 02
30820255 308201BE A0030201 02020102 300D0609 2A864886 F70D0101 04050030
31312F30 2D060355 04031326 494F532D 53656C66 2D536967 6E65642D 43657274
69666963 6174652D 31333437 34383839 3339301E 170D3032 30333031 30313336
33375A17 0D323030 31303130 30303030 305A3031 312F302D 06035504 03132649
4F532D53 656C662D 5369676E 65642D43 65727469 66696361 74652D31 33343734
38383933 3930819F 300D0609 2A864886 F70D0101 01050003 818D0030 81890281
8100E714 7B0ADB41 19F60528 A8A5C43B 5CD2D1CD DCCF2E08 8B38D444 36EAB9B7
0E93CEF7 660F979E E27915B9 E44812A5 794EA03D BA66752B FD0F7EBF D6342513
D6410E4E 098CE838 C3BADD0A 5F3505FE 22CA776F 89B19510 F0852225 3600F046
4D57D2E2 FE4AAD1E 8BE4BF80 7B27369E BFA65160 BC769BC9 00A13741 E336D0EA
8A810203 010001A3 7D307B30 0F060355 1D130101 FF040530 030101FF 30280603
551D1104 21301F82 1D686870 2D737479 2D626163 6B75702E 796F7572 646F6D61
696E2E63 6F6D301F 0603551D 23041830 168014FA 4A8C4DF6 629638DE 87D7B60A
0F5BB40F EA6AED30 1D060355 1D0E0416 0414FA4A 8C4DF662 9638DE87 D7B60A0F
5BB40FEA 6AED300D 06092A86 4886F70D 01010405 00038181 00BBE577 6EF63FE7
789766D5 37841812 298D4885 1CD06D07 4C625369 C3403106 89EE1398 73495432
66C49CB1 36A5B2F8 D77A8C46 5AFE4112 EA5917D9 81542640 80EF2D36 54A85CC6
C3FFFFB8 39A648DD 2ABA2B13 4137BE07 760E46C0 74401DA7 482E3FA2 A64B70FF
447AA1B2 52E37240 29987085 532BBE3B C2E2E54A 54CA1D13 0E
quit
dot11 syslog
ip source-route
ip dhcp excluded-address 10.10.10.1
ip dhcp pool inside
ip dhcp pool lan_network
network 172.20.224.0 255.255.240.0
dns-server 8.8.8.8 8.8.4.4
default-router 172.20.224.1
lease 7
ip cef
no ip domain lookup
ip domain name yourdomain.com
password encryption aes
username pix privilege 15 secret 5 $1$Z.wA$lBmj36AJx/cbK1RjmfGJh1
username admin privilege 15 password 0 434Zaty
crypto isakmp policy 1
encr 3des
authentication pre-share
group 2
crypto isakmp key password address 217.36.32.222
crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
crypto map SDM_CMAP_1 1 ipsec-isakmp
description Tunnel to217.36.32.222
set peer 217.36.32.222
set transform-set ESP-3DES-SHA
match address 100
archive
log config
hidekeys
interface ATM0
no ip address
no atm ilmi-keepalive
pvc 0/38
encapsulation aal5mux ppp dialer
dialer pool-member 1
dsl operating-mode auto
interface FastEthernet0
interface FastEthernet1
interface FastEthernet2
interface FastEthernet3
interface Vlan1
description $ETH-SW-LAUNCH$$INTF-INFO-HWIC 4ESW$
ip address 172.20.224.1 255.255.240.0
ip nat inside
ip virtual-reassembly
ip tcp adjust-mss 1452
interface Dialer0
ip address negotiated
ip nat outside
ip virtual-reassembly
encapsulation ppp
dialer pool 1
no cdp enable
ppp authentication chap callin
ppp chap hostname B6*******.btclick.com
ppp chap password 0 H*******
crypto map SDM_CMAP_1
ip forward-protocol nd
ip route 0.0.0.0 0.0.0.0 Dialer0
ip http server
ip http authentication local
ip http secure-server
ip http timeout-policy idle 60 life 86400 requests 10000
ip nat inside source route-map SDM_RMAP_1 interface Dialer0 overload
access-list 1 remark CCP_ACL Category=16
access-list 1 permit 172.4.0.0 0.240.255.255
access-list 10 permit 195.12.1.35
access-list 10 permit 172.4.0.0 0.240.255.255
access-list 100 remark CCP_ACL Category=4
access-list 100 remark IPSec Rule
access-list 100 permit ip 172.20.224.0 0.0.15.255 192.168.168.0 0.0.0.255
access-list 101 remark CCP_ACL Category=2
access-list 101 remark IPSec Rule
access-list 101 deny ip 172.20.224.0 0.0.15.255 192.168.168.0 0.0.0.255
access-list 101 permit ip 172.4.0.0 0.240.255.255 any
route-map SDM_RMAP_1 permit 1
match ip address 101
control-plane
banner exec ^C
% Password expiration warning.
Cisco Configuration Professional (Cisco CP) is installed on this device
and it provides the default username "cisco" for one-time use. If you have
already used the username "cisco" to login to the router and your IOS image
supports the "one-time" user option, then this username has already expired.
You will not be able to login to the router with this username after you exit
this session.
It is strongly suggested that you create a new username with a privilege level
of 15 using the following command.
username <myuser> privilege 15 secret 0 <mypassword>
Replace <myuser> and <mypassword> with the username and password you
want to use.
^C
banner login ^C
Cisco Configuration Professional (Cisco CP) is installed on this device.
This feature requires the one-time use of the username "cisco" with the
password "cisco". These default credentials have a privilege level of 15.
YOU MUST USE CISCO CP or the CISCO IOS CLI TO CHANGE THESE
PUBLICLY-KNOWN CREDENTIALS
Here are the Cisco IOS commands.
username <myuser> privilege 15 secret 0 <mypassword>
no username cisco
Replace <myuser> and <mypassword> with the username and password you want
to use.
IF YOU DO NOT CHANGE THE PUBLICLY-KNOWN CREDENTIALS, YOU WILL
NOT BE ABLE TO LOG INTO THE DEVICE AGAIN AFTER YOU HAVE LOGGED OFF.
For more information about Cisco CP please follow the instructions in the
QUICK START GUIDE for your router or go to http://www.cisco.com/go/ciscocp
^C
line con 0
no modem enable
stopbits 1
line aux 0
line vty 0 4
access-class 10 in
privilege level 15
password 434Zaty
transport input telnet ssh
scheduler max-task-time 5000
end
Any help will be most gratefully recieved.Rick,
Thanks for replying. Here is the output from the 800 Show Crypto command:
interface: Dialer0
Crypto map tag: SDM_CMAP_1, local addr 81.136.160.237
protected vrf: (none)
local ident (addr/mask/prot/port): (172.20.224.0/255.255.240.0/0/0)
remote ident (addr/mask/prot/port): (192.168.168.0/255.255.255.0/0/0)
current_peer 217.36.32.222 port 500
PERMIT, flags={origin_is_acl,}
#pkts encaps: 10928, #pkts encrypt: 10928, #pkts digest: 10928
#pkts decaps: 0, #pkts decrypt: 0, #pkts verify: 0
#pkts compressed: 0, #pkts decompressed: 0
#pkts not compressed: 0, #pkts compr. failed: 0
#pkts not decompressed: 0, #pkts decompress failed: 0
#send errors 2, #recv errors 0
local crypto endpt.: 81.136.160.237, remote crypto endpt.: 217.36.32.222
path mtu 1500, ip mtu 1500, ip mtu idb Virtual-Access2
current outbound spi: 0x0(0)
inbound esp sas:
inbound ah sas:
inbound pcp sas:
outbound esp sas:
outbound ah sas:
outbound pcp sas:
interface: Virtual-Access2
Crypto map tag: SDM_CMAP_1, local addr 81.136.160.237
protected vrf: (none)
local ident (addr/mask/prot/port): (172.20.224.0/255.255.240.0/0/0)
remote ident (addr/mask/prot/port): (192.168.168.0/255.255.255.0/0/0)
current_peer 217.36.32.222 port 500
PERMIT, flags={origin_is_acl,}
#pkts encaps: 10928, #pkts encrypt: 10928, #pkts digest: 10928
#pkts decaps: 0, #pkts decrypt: 0, #pkts verify: 0
#pkts compressed: 0, #pkts decompressed: 0
#pkts not compressed: 0, #pkts compr. failed: 0
#pkts not decompressed: 0, #pkts decompress failed: 0
#send errors 2, #recv errors 0
local crypto endpt.: 81.136.160.237, remote crypto endpt.: 217.36.32.222
path mtu 1500, ip mtu 1500, ip mtu idb Virtual-Access2
current outbound spi: 0x0(0)
inbound esp sas:
inbound ah sas:
inbound pcp sas:
outbound esp sas:
outbound ah sas:
outbound pcp sas:
and this is the running config frm our ASA at HQ:
Result of the command: "sh run"
: Saved
ASA Version 8.2(1)
hostname secure-access
domain-name hhp.com
enable password UWWykvGjAPmxufUo encrypted
passwd 2KFQnbNIdI.2KYOU encrypted
names
interface Vlan1
nameif inside
security-level 100
ip address 192.168.168.1 255.255.255.0
interface Vlan2
nameif outside
security-level 0
pppoe client vpdn group BT
ip address 217.36.32.222 255.255.255.255 pppoe
interface Vlan12
nameif DMZ
security-level 50
ip address 192.168.169.1 255.255.255.0
interface Vlan22
nameif Wireless_HHP
security-level 100
ip address 172.16.36.1 255.255.254.0
interface Vlan32
nameif CNES
security-level 100
ip address 187.187.168.1 255.255.0.0
interface Ethernet0/0
switchport access vlan 2
interface Ethernet0/1
interface Ethernet0/2
switchport access vlan 12
interface Ethernet0/3
switchport access vlan 22
interface Ethernet0/4
switchport access vlan 32
interface Ethernet0/5
switchport access vlan 12
interface Ethernet0/6
switchport access vlan 12
interface Ethernet0/7
ftp mode passive
dns domain-lookup inside
dns domain-lookup outside
dns domain-lookup DMZ
dns domain-lookup Wireless_HHP
dns domain-lookup CNES
dns server-group DefaultDNS
name-server 192.168.168.2
domain-name hhp.com
same-security-traffic permit inter-interface
same-security-traffic permit intra-interface
object-group network NET-cnes_HHP-Sty
network-object 172.20.224.0 255.255.240.0
object-group network NET-cnes_HHP-Balivanich
network-object 172.20.192.0 255.255.240.0
object-group network Oak-DC1
network-object 192.168.168.2 255.255.255.255
object-group network Maple-DC2
network-object 192.168.168.3 255.255.255.255
object-group network HHP_Domain_Controllers
group-object Oak-DC1
group-object Maple-DC2
object-group network PC-Support
network-object 187.187.60.1 255.255.255.255
network-object 187.187.60.2 255.255.255.254
network-object 187.187.60.4 255.255.255.254
network-object 187.187.60.6 255.255.255.255
object-group network ELM-ActiveH
network-object 192.168.168.6 255.255.255.255
object-group network Pine-GP
network-object 192.168.168.12 255.255.255.255
object-group network HHP_Application_Servers
group-object ELM-ActiveH
group-object Pine-GP
object-group network Fern-TS1
network-object 192.168.168.4 255.255.255.255
object-group network Fir-TS2
network-object 192.168.168.5 255.255.255.255
object-group network HHP_Terminal_Servers
group-object Fern-TS1
group-object Fir-TS2
object-group service Global_Catalog_LDAP
description (Generated by Cisco SM from Object "Global Catalog LDAP")
service-object tcp eq 3268
object-group service Global_Catalog_LDAP_SSL
description (Generated by Cisco SM from Object "Global Catalog LDAP SSL")
service-object tcp eq 3269
object-group service UDP-389
description UDP port for LDAP
service-object udp eq 389
object-group service TCP-88
description TCP Port 88
service-object tcp eq 88
object-group service TCP-445
description SMB
service-object tcp eq 445
object-group network John_-_Laptop
description John's Laptop
network-object 187.187.10.65 255.255.255.255
object-group network Graham_-_PC
description Graham Morrison's PC
network-object 187.187.10.90 255.255.255.255
object-group network john_test
network-object 187.187.40.7 255.255.255.255
object-group network Iain_PC
description Iain Macaulay IT
network-object 187.187.10.19 255.255.255.255
object-group network John_-_PC
description John MacPhail's PC
network-object 187.187.10.7 255.255.255.255
object-group network it-alahen-lap
network-object 187.187.10.230 255.255.255.255
object-group network Catriona_-_Laptop
description Catriona's Laptop
network-object 187.187.10.60 255.255.255.255
object-group network Graham_-_Laptop
network-object 187.186.10.120 255.255.255.255
object-group network it-innive-xp
description Innes MacIver's PC
network-object 187.187.10.14 255.255.255.255
object-group network it-alahen-xp
description Desktop
network-object 187.187.10.229 255.255.255.255
object-group network Cat_-_PC
description Catriona Macmillan's PC
network-object 187.187.10.4 255.255.255.255
object-group network it-davdon-xp
description Desktop
network-object 187.187.160.7 255.255.255.255
object-group network cat-laptop
description Catriona's Laptop addresses
network-object 187.187.77.81 255.255.255.255
network-object 187.187.77.82 255.255.255.255
object-group network Catriona_old_pc
network-object 187.187.10.44 255.255.255.255
object-group network cat-tablet
description Catriona's Tablet ip address's
network-object 187.187.77.78 255.255.255.254
object-group network DSO-SQLServer
description Task Database Server
network-object 187.187.1.33 255.255.255.255
object-group network it-finfernew-xp
description Findlay Ferguson PC
network-object 187.187.10.153 255.255.255.255
object-group network PC_Support
group-object John_-_Laptop
group-object Graham_-_PC
group-object john_test
group-object Iain_PC
group-object John_-_PC
group-object it-alahen-lap
group-object Catriona_-_Laptop
group-object Graham_-_Laptop
group-object it-alahen-xp
group-object Cat_-_PC
group-object it-davdon-xp
group-object cat-laptop
group-object Catriona_old_pc
group-object cat-tablet
group-object it-innive-xp
network-object 187.187.1.128 255.255.255.255
network-object 187.187.10.76 255.255.255.255
group-object DSO-SQLServer
network-object 187.187.15.234 255.255.255.255
network-object 187.187.4.60 255.255.255.255
network-object 187.187.10.134 255.255.255.255
network-object 172.18.194.22 255.255.255.255
group-object it-finfernew-xp
object-group network Entire_CNE
description Entire CNE range
network-object 187.0.0.0 255.0.0.0
object-group network NET-cnes_HHP-Sty-Staff
network-object 172.20.225.0 255.255.255.0
object-group network NET-cnes_HHP-Balivanich-staff
network-object 172.20.193.0 255.255.255.0
object-group network Alder-Intranet
network-object 192.168.168.13 255.255.255.255
object-group network Aspen-ISA
network-object 192.168.168.10 255.255.255.255
object-group service tcp-8080
description TCP Port 8080
service-object tcp eq 8080
object-group network Beech-External
network-object 217.36.32.210 255.255.255.255
object-group network it-csm
description cisco security manager
network-object 187.187.1.72 255.255.255.255
object-group network Juniper-External
description Internet Server
network-object 217.36.32.211 255.255.255.255
object-group network HHP_Server_Network
network-object 192.168.168.0 255.255.255.0
object-group network Messagelabs_Incoming_HHP
network-object 67.219.240.0 255.255.240.0
network-object 95.131.104.0 255.255.248.0
network-object 193.109.254.0 255.255.254.0
network-object 195.245.230.0 255.255.254.0
network-object 216.82.240.0 255.255.240.0
network-object 85.158.136.0 255.255.248.0
network-object 117.120.16.0 255.255.248.0
network-object 194.106.220.0 255.255.254.0
object-group network Angus-Maclean-PC
network-object 187.187.10.250 255.255.255.255
object-group service RDP
service-object tcp eq 3389
object-group network it-dbserver
description Database Server (Live)
network-object 187.187.1.65 255.255.255.255
object-group network it-sql-test
description Test SQL / database server
network-object 187.187.1.81 255.255.255.255
object-group service DNS-Resolving
description Domain Name Server
service-object tcp eq domain
service-object udp eq domain
object-group network Beech-Exchange
network-object 192.168.168.91 255.255.255.255
object-group network Messagelabs_-_Incoming
description List of MessageLab addresses that SMTP connections are accepted from
network-object 212.125.75.0 255.255.255.224
network-object 216.82.240.0 255.255.240.0
network-object 195.216.16.211 255.255.255.255
network-object 194.205.110.128 255.255.255.224
network-object 194.106.220.0 255.255.254.0
network-object 193.109.254.0 255.255.254.0
network-object 62.231.131.0 255.255.255.0
network-object 62.173.108.208 255.255.255.240
network-object 62.173.108.16 255.255.255.240
network-object 212.125.74.44 255.255.255.255
network-object 195.245.230.0 255.255.254.0
network-object 85.158.136.0 255.255.248.0
object-group network MIS_Support
network-object 192.168.168.250 255.255.255.254
object-group network it-donadon-xp
description Donald Macdonald's PC
network-object 187.187.10.13 255.255.255.255
object-group network Angela_PC
network-object 187.187.10.155 255.255.255.255
object-group network Katie_PC
network-object 187.187.10.151 255.255.255.255
object-group network Pauline_PC
network-object 187.187.10.12 255.255.255.255
object-group network it-paye-net
network-object 187.187.1.92 255.255.255.255
object-group network MessageLabs-Towers
description Message Labs IP Address ranges
network-object 216.82.240.0 255.255.240.0
network-object 67.219.240.0 255.255.240.0
network-object 85.158.136.0 255.255.248.0
network-object 95.131.104.0 255.255.248.0
network-object 117.120.16.0 255.255.248.0
network-object 193.109.254.0 255.255.254.0
network-object 194.106.220.0 255.255.254.0
network-object 195.245.230.0 255.255.254.0
network-object 62.231.131.0 255.255.255.0
network-object 212.125.75.16 255.255.255.240
object-group network NET_cnes-castlebay-staff
network-object 172.19.17.0 255.255.255.0
object-group network NET_cnes_tarbert_staff
description NET_cnes_tarbert_staff
network-object 172.19.33.0 255.255.255.0
object-group network Juniper
network-object 192.168.169.5 255.255.255.255
object-group network HHP_DMZ_Network
network-object 192.168.169.0 255.255.255.0
object-group network Ash
network-object 192.168.168.100 255.255.255.255
object-group service UDP-445
service-object udp eq 445
object-group service tcp-udp-135-139
service-object tcp-udp range 135 139
object-group network HHP-ELM
description HHP's ELM ActiveH server
network-object 187.187.1.203 255.255.255.255
object-group network CNES-Ext-GW
description CNES External Address
network-object 194.83.245.242 255.255.255.255
object-group service IPSEC
description IPSEC
service-object 57
service-object ah
service-object esp
service-object udp eq isakmp
object-group network Alamur-PC
network-object 187.187.10.15 255.255.255.255
object-group network Iain-Nicolson-PC
network-object 187.187.10.159 255.255.255.255
object-group network HHP_Remote_Access_Pool
network-object 192.168.168.200 255.255.255.248
network-object 192.168.168.208 255.255.255.240
network-object 192.168.168.224 255.255.255.252
network-object 192.168.168.228 255.255.255.254
object-group network Holly-AV
network-object 192.168.168.9 255.255.255.255
object-group service AVG_Ports
description For AVG server to HHP PCs
service-object tcp-udp eq 6150
service-object tcp-udp eq 6051
service-object tcp-udp eq 445
service-object tcp-udp eq 138
service-object tcp-udp eq 135
service-object tcp-udp eq 6054
service-object tcp-udp eq 4158
service-object tcp-udp eq 139
service-object tcp-udp eq 137
object-group network CNES_Access
network-object 192.168.168.230 255.255.255.254
network-object 192.168.168.232 255.255.255.248
network-object 192.168.168.240 255.255.255.248
network-object 192.168.168.248 255.255.255.254
object-group network HHP-068
description BACS PC
network-object 172.20.225.6 255.255.255.255
object-group network Banyan
network-object 192.168.168.105 255.255.255.255
object-group service TCP81
description TCP Port 81
service-object tcp eq 81
object-group network Gavin_-_new_PC
network-object 187.187.10.150 255.255.255.255
object-group network Secudoors
network-object 172.20.224.4 255.255.255.255
access-list outside_access_in remark Time sync to external ntp server
access-list outside_access_in extended permit udp host 192.108.114.23 object-group HHP_Domain_Controllers eq ntp
access-list outside_access_in extended permit tcp object-group MessageLabs-Towers object-group Beech-External eq smtp
access-list outside_access_in extended permit ip host 81.136.160.237 object-group HHP_Server_Network
access-list outside_access_in extended permit ip object-group CNES_Access object-group HHP_Server_Network
access-list outside_access_in extended permit ip object-group MIS_Support object-group HHP_Server_Network
access-list outside_access_in extended permit ip object-group HHP_Remote_Access_Pool object-group HHP_Server_Network
access-list outside_access_in extended permit tcp any object-group Juniper-External eq www
access-list outside_access_in extended permit tcp any object-group Juniper-External eq https
access-list outside_access_in extended deny ip any any
access-list outside_access_in_1 extended permit ip any any
access-list CSM_FW_ACL_Wireless_HHP extended permit ip object-group NET-cnes_HHP-Balivanich object-group HHP_Server_Network
access-list CSM_FW_ACL_Wireless_HHP extended permit ip object-group NET-cnes_HHP-Sty object-group HHP_Server_Network
access-list CSM_FW_ACL_Wireless_HHP extended permit tcp object-group HHP-068 any eq www
access-list CSM_FW_ACL_Wireless_HHP extended permit tcp object-group HHP-068 any eq domain
access-list CSM_FW_ACL_Wireless_HHP extended permit udp object-group HHP-068 any eq domain
access-list CSM_FW_ACL_Wireless_HHP extended permit tcp object-group HHP-068 any eq https
access-list CSM_FW_ACL_Wireless_HHP extended permit object-group DNS-Resolving object-group HHP-068 any
access-list CSM_FW_ACL_Wireless_HHP extended permit object-group tcp-8080 object-group HHP-068 any
access-list CSM_FW_ACL_Wireless_HHP extended permit ip host 172.20.193.53 object-group CNES-Ext-GW
access-list CSM_FW_ACL_Wireless_HHP extended permit ip object-group Secudoors any
access-list CSM_FW_ACL_inside extended permit ip object-group HHP_Server_Network object-group NET-cnes_HHP-Balivanich
access-list CSM_FW_ACL_inside extended permit ip object-group HHP_Server_Network object-group NET-cnes_HHP-Sty
access-list CSM_FW_ACL_inside extended permit ip object-group HHP_Application_Servers object-group PC_Support
access-list CSM_FW_ACL_inside extended permit ip object-group HHP_Domain_Controllers object-group PC_Support
access-list CSM_FW_ACL_inside extended permit ip object-group HHP_Terminal_Servers object-group PC_Support
access-list CSM_FW_ACL_inside extended permit tcp object-group Oak-DC1 any eq domain
access-list CSM_FW_ACL_inside extended permit udp object-group Oak-DC1 any eq domain
access-list CSM_FW_ACL_inside extended permit object-group DNS-Resolving object-group Oak-DC1 any
access-list CSM_FW_ACL_inside extended permit tcp object-group Maple-DC2 any eq domain
access-list CSM_FW_ACL_inside extended permit udp object-group Maple-DC2 any eq domain
access-list CSM_FW_ACL_inside extended permit object-group DNS-Resolving object-group Maple-DC2 any
access-list CSM_FW_ACL_inside extended permit tcp object-group Aspen-ISA any eq www
access-list CSM_FW_ACL_inside extended permit tcp object-group Aspen-ISA any eq domain
access-list CSM_FW_ACL_inside extended permit udp object-group Aspen-ISA any eq domain
access-list CSM_FW_ACL_inside extended permit tcp object-group Aspen-ISA any eq https
access-list CSM_FW_ACL_inside extended permit object-group DNS-Resolving object-group Aspen-ISA any
access-list CSM_FW_ACL_inside extended permit object-group tcp-8080 object-group Aspen-ISA any
access-list CSM_FW_ACL_inside remark For Symantec Liveupdates
access-list CSM_FW_ACL_inside extended permit tcp object-group Banyan any eq ftp
access-list CSM_FW_ACL_inside extended permit tcp object-group Banyan any eq www
access-list CSM_FW_ACL_inside extended permit tcp object-group Banyan any eq https
access-list CSM_FW_ACL_inside remark IPSec VPN access from ELm to CNES
access-list CSM_FW_ACL_inside extended permit object-group IPSEC object-group ELM-ActiveH object-group CNES-Ext-GW
access-list CSM_FW_ACL_inside extended permit udp object-group ELM-ActiveH object-group CNES-Ext-GW eq 4500
access-list CSM_FW_ACL_inside extended permit tcp object-group ELM-ActiveH object-group CNES-Ext-GW eq 4500
access-list CSM_FW_ACL_inside extended permit icmp object-group HHP_Server_Network object-group HHP_DMZ_Network
access-list CSM_FW_ACL_inside remark Time sync to external ntp server
access-list CSM_FW_ACL_inside extended permit udp object-group HHP_Domain_Controllers host 192.108.114.23 eq ntp
access-list CSM_FW_ACL_inside extended permit tcp object-group Beech-Exchange object-group Messagelabs_-_Incoming eq smtp
access-list CSM_FW_ACL_inside extended permit tcp object-group Aspen-ISA object-group Juniper eq www
access-list CSM_FW_ACL_inside extended permit tcp object-group Aspen-ISA object-group Juniper eq https
access-list CSM_FW_ACL_inside extended permit ip object-group Holly-AV object-group Juniper
access-list CSM_FW_ACL_inside extended deny ip any any
access-list CSM_FW_ACL_CNES extended permit ip object-group PC_Support object-group HHP_Server_Network
access-list CSM_FW_ACL_CNES extended permit ip object-group PC_Support object-group HHP_DMZ_Network
access-list CSM_FW_ACL_CNES extended permit ip object-group PC_Support object-group NET-cnes_HHP-Balivanich
access-list CSM_FW_ACL_CNES extended permit ip object-group PC_Support object-group NET-cnes_HHP-Sty
access-list CSM_FW_ACL_CNES extended permit tcp object-group it-csm any eq ssh
access-list CSM_FW_ACL_CNES extended permit tcp object-group it-csm any eq www
access-list CSM_FW_ACL_CNES extended permit tcp object-group it-csm any eq https
access-list CSM_FW_ACL_CNES remark Aim's access to Active H server: DSO SQL
access-list CSM_FW_ACL_CNES remark server's access (Task)
access-list CSM_FW_ACL_CNES remark IT Ops - mapped drive for FTP transfer to and from E450/Elm of Entitlement Adjustments
access-list CSM_FW_ACL_CNES remark and Tenancy Changes
access-list CSM_FW_ACL_CNES extended permit ip object-group it-sql-test object-group ELM-ActiveH
access-list CSM_FW_ACL_CNES extended permit ip object-group DSO-SQLServer object-group ELM-ActiveH
access-list CSM_FW_ACL_CNES extended permit ip object-group it-paye-net object-group ELM-ActiveH
access-list CSM_FW_ACL_CNES extended permit ip object-group Angela_PC object-group ELM-ActiveH
access-list CSM_FW_ACL_CNES extended permit ip object-group Katie_PC object-group ELM-ActiveH
access-list CSM_FW_ACL_CNES extended permit ip object-group Pauline_PC object-group ELM-ActiveH
access-list CSM_FW_ACL_CNES remark donald and Findlay RDP access to Active H
access-list CSM_FW_ACL_CNES extended permit object-group RDP object-group it-donadon-xp object-group ELM-ActiveH
access-list CSM_FW_ACL_CNES extended permit object-group RDP object-group it-donadon-xp object-group HHP_Terminal_Servers
access-list CSM_FW_ACL_CNES extended permit object-group RDP object-group it-finfernew-xp object-group ELM-ActiveH
access-list CSM_FW_ACL_CNES extended permit object-group RDP object-group it-finfernew-xp object-group HHP_Terminal_Servers
access-list CSM_FW_ACL_CNES extended permit ip object-group Angus-Maclean-PC object-group Alder-Intranet
access-list CSM_FW_ACL_CNES extended permit ip object-group Angus-Maclean-PC host 192.168.168.17
access-list CSM_FW_ACL_CNES extended permit ip object-group Angus-Maclean-PC object-group Juniper
access-list CSM_FW_ACL_CNES extended permit ip object-group Iain-Nicolson-PC object-group Alder-Intranet
access-list CSM_FW_ACL_CNES extended permit ip object-group Iain-Nicolson-PC host 192.168.168.17
access-list CSM_FW_ACL_CNES extended permit ip object-group Iain-Nicolson-PC object-group Juniper
access-list CSM_FW_ACL_CNES extended permit ip object-group it-davdon-xp object-group Alder-Intranet
access-list CSM_FW_ACL_CNES extended permit ip object-group it-davdon-xp host 192.168.168.17
access-list CSM_FW_ACL_CNES extended permit ip object-group it-davdon-xp object-group Juniper
access-list CSM_FW_ACL_CNES extended permit ip object-group Alamur-PC object-group Alder-Intranet
access-list CSM_FW_ACL_CNES extended permit ip object-group Alamur-PC host 192.168.168.17
access-list CSM_FW_ACL_CNES extended permit ip object-group Alamur-PC object-group Juniper
access-list CSM_FW_ACL_CNES extended permit ip object-group Gavin_-_new_PC object-group Alder-Intranet
access-list CSM_FW_ACL_CNES extended permit ip object-group Gavin_-_new_PC host 192.168.168.17
access-list CSM_FW_ACL_CNES extended permit ip object-group Gavin_-_new_PC object-group Juniper
access-list CSM_FW_ACL_CNES extended permit object-group RDP object-group NET_cnes-castlebay-staff object-group HHP_Server_Network
access-list CSM_FW_ACL_CNES extended permit object-group RDP object-group NET_cnes_tarbert_staff object-group HHP_Server_Network
access-list MIS_splitTunnelAcl standard permit 192.168.168.0 255.255.255.0
access-list inside_nat0_outbound extended permit ip object-group HHP_Server_Network 192.168.168.250 255.255.255.254
access-list inside_nat0_outbound extended permit ip object-group HHP_Server_Network 192.168.168.224 255.255.255.224
access-list CSM_FW_ACL_DMZ extended permit ip object-group HHP_DMZ_Network object-group PC_Support
access-list CSM_FW_ACL_DMZ extended permit icmp object-group HHP_DMZ_Network object-group HHP_Server_Network
access-list CSM_FW_ACL_DMZ extended permit ip object-group Juniper object-group Angus-Maclean-PC
access-list CSM_FW_ACL_DMZ extended permit ip object-group Juniper object-group Holly-AV
access-list CSM_FW_ACL_DMZ extended permit tcp object-group Juniper object-group Beech-Exchange eq smtp
access-list CSM_FW_ACL_DMZ extended permit tcp object-group Juniper object-group HHP_Domain_Controllers eq domain
access-list CSM_FW_ACL_DMZ extended permit udp object-group Juniper object-group HHP_Domain_Controllers eq domain
access-list CSM_FW_ACL_DMZ remark for backups to USB drive on ASH
access-list CSM_FW_ACL_DMZ extended permit object-group TCP-445 object-group Juniper object-group Ash
access-list CSM_FW_ACL_DMZ extended permit object-group UDP-445 object-group Juniper object-group Ash
access-list CSM_FW_ACL_DMZ extended permit object-group tcp-udp-135-139 object-group Juniper object-group Ash
access-list CSM_FW_ACL_DMZ extended deny ip any any
access-list CNES_Support_splitTunnelAcl standard permit 192.168.168.0 255.255.255.0
access-list RemoteAccess_splitTunnelAcl standard permit 192.168.168.0 255.255.255.0
access-list outside_cryptomap extended permit ip object-group HHP_Server_Network object-group NET-cnes_HHP-Sty
pager lines 24
logging enable
logging asdm informational
mtu inside 1500
mtu outside 1492
mtu DMZ 1500
mtu Wireless_HHP 1500
mtu CNES 1500
ip local pool CNES_Access 192.168.168.230-192.168.168.249
ip local pool MIS_Support 192.168.168.250-192.168.168.251
ip local pool OLM-VPN-Pool 192.168.168.252
ip local pool HHP_Remote_Access_Pool 192.168.168.200-192.168.168.229
no failover
icmp unreachable rate-limit 1 burst-size 1
no asdm history enable
arp timeout 14400
nat-control
global (outside) 1 interface
nat (inside) 0 access-list inside_nat0_outbound
nat (inside) 1 0.0.0.0 0.0.0.0
nat (Wireless_HHP) 1 172.20.193.53 255.255.255.255
nat (Wireless_HHP) 1 172.20.225.0 255.255.255.0
static (inside,CNES) 192.168.168.0 192.168.168.0 netmask 255.255.255.0
static (CNES,inside) 187.187.0.0 255.255.0.0 netmask 255.255.0.0
static (Wireless_HHP,inside) 172.20.224.0 172.20.224.0 netmask 255.255.240.0
static (inside,Wireless_HHP) 192.168.168.0 192.168.168.0 netmask 255.255.255.0
static (CNES,Wireless_HHP) 187.187.0.0 187.187.0.0 netmask 255.255.0.0
static (inside,outside) 217.36.32.210 192.168.168.91 netmask 255.255.255.255
static (DMZ,outside) 217.36.32.211 192.168.169.5 netmask 255.255.255.255
static (inside,DMZ) 192.168.168.0 192.168.168.0 netmask 255.255.255.0
static (CNES,DMZ) 187.0.0.0 187.0.0.0 netmask 255.0.0.0
access-group CSM_FW_ACL_inside in interface inside
access-group outside_access_in_1 in interface outside control-plane
access-group outside_access_in in interface outside
access-group CSM_FW_ACL_DMZ in interface DMZ
access-group CSM_FW_ACL_Wireless_HHP in interface Wireless_HHP
access-group CSM_FW_ACL_CNES in interface CNES
route outside 0.0.0.0 0.0.0.0 81.148.0.157 1
route Wireless_HHP 172.20.192.0 255.255.240.0 172.16.36.3 1
route Wireless_HHP 172.20.224.0 255.255.240.0 172.16.36.2 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
dynamic-access-policy-record DfltAccessPolicy
aaa-server HHP protocol ldap
aaa-server HHP (inside) host 192.168.168.2
timeout 5
ldap-base-dn dc=hhp,dc=com
ldap-scope subtree
ldap-naming-attribute sAMAccountName
ldap-login-password *
ldap-login-dn cn=gramor,cn=users,dc=hhp,dc=com
server-type microsoft
aaa-server HHP_1 protocol ldap
aaa-server HHP_1 (inside) host 192.168.168.2
timeout 5
ldap-base-dn dc=hhp,dc=com
ldap-scope subtree
ldap-naming-attribute sAMAccountName
ldap-login-password *
ldap-login-dn cn=administrator,cn=users,dc=hhp,dc=com
server-type microsoft
aaa-server HHP_3 protocol ldap
aaa-server HHP_3 (inside) host 192.168.168.2
timeout 5
ldap-base-dn dc=hhp,dc=com
ldap-scope subtree
ldap-naming-attribute sAMAccountName
ldap-login-password *
ldap-login-dn cn=administrator,cn=users,dc=hhp,dc=com
server-type microsoft
aaa authentication ssh console LOCAL
aaa authentication http console LOCAL
http server enable
http 192.168.1.0 255.255.255.0 inside
http 192.168.168.0 255.255.255.0 inside
http 0.0.0.0 0.0.0.0 outside
http 194.83.245.242 255.255.255.255 outside
http 187.187.1.72 255.255.255.255 CNES
http 187.187.10.90 255.255.255.255 CNES
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
crypto ipsec transform-set ESP-DES-SHA esp-des esp-sha-hmac
crypto ipsec transform-set ESP-DES-MD5 esp-des esp-md5-hmac
crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
crypto ipsec transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac
crypto ipsec transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
crypto ipsec transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac
crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
crypto ipsec transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac
crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
crypto ipsec security-association lifetime seconds 28800
crypto ipsec security-association lifetime kilobytes 4608000
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set pfs group1
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA ESP-3DES-MD5 ESP-DES-SHA ESP-DES-MD5
crypto dynamic-map outside_map_dynamic 2 set transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA ESP-3DES-MD5 ESP-DES-SHA ESP-DES-MD5
crypto map outside_map 1 match address outside_cryptomap
crypto map outside_map 1 set peer 81.136.160.237
crypto map outside_map 1 set transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA ESP-3DES-MD5 ESP-DES-SHA ESP-DES-MD5
crypto map outside_map 30001 ipsec-isakmp dynamic outside_map_dynamic
crypto map outside_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP
crypto map outside_map interface outside
crypto ca trustpoint ASDM_TrustPoint0
enrollment terminal
fqdn none
subject-name O=Hebridean Housing Partnership Limited,CN=secure-access.hebrideanhousing.co.uk,L=Isle of Lewis,ST=Scotland,C=GB
keypair SSL_Certificate
crl configure
crypto ca trustpoint ASDM_TrustPoint1
enrollment terminal
fqdn none
crl configure
crypto ca certificate chain ASDM_TrustPoint0
certificate 0100000000012790a5c005
30820530 30820418 a0030201 02020b01 00000000 012790a5 c005300d 06092a86
4886f70d 01010505 00306a31 23302106 0355040b 131a4f72 67616e69 7a617469
6f6e2056 616c6964 6174696f 6e204341 31133011 06035504 0a130a47 6c6f6261
6c536967 6e312e30 2c060355 04031325 476c6f62 616c5369 676e204f 7267616e
697a6174 696f6e20 56616c69 64617469 6f6e2043 41301e17 0d313030 33323431
34313835 385a170d 31333033 32343134 31383534 5a308197 310b3009 06035504
06130247 42311130 0f060355 04081308 53636f74 6c616e64 31163014 06035504
07130d49 736c6520 6f66204c 65776973 312e302c 06035504 0a132548 65627269
6465616e 20486f75 73696e67 20506172 746e6572 73686970 204c696d 69746564
312d302b 06035504 03132473 65637572 652d6163 63657373 2e686562 72696465
616e686f 7573696e 672e636f 2e756b30 82012230 0d06092a 864886f7 0d010101
05000382 010f0030 82010a02 82010100 def181d9 c34c58a8 9abcc849 7d8ad0a9
3c64c77f f3126c81 30911f41 5903a92c 81fb374b 2fe2680e 10b26dce 81ca0c23
af2c9f9a 52295e8c d2223fa6 7c4c386d 51c6fb16 a47688e6 e47e2410 b0283503
fd72abd3 e59d3b02 cd47706e babf948c 4e0282a3 5f789ff7 8041b2db ceac64eb
3e163b38 3a8ecc25 0c4802a8 d17fecd9 f1a36288 29202df4 b20ae891 f95ce055
6e670559 3d075024 7f3ac7ef 26218154 a7f6a399 34c43c4a 97c2c88c c4588ee4
77cc2ad8 b1bd868d d55c2b9b 727e9904 66d0fb52 c212abd7 a06f28f1 ad2aa04b
3d7b3094 c59c00d4 cf51fefb d8bfa101 8ba9c4ba 5cf629ff c50716d3 71019a98
8fa55b83 6b158b6d 1043f092 646ef07d 02030100 01a38201 a7308201 a3301f06
03551d23 04183016 80147d6d 2aec66ab a75136ab 0269f170 8fc4590b 9a1f3049
06082b06 01050507 0101043d 303b3039 06082b06 01050507 3002862d 68747470
3a2f2f73 65637572 652e676c 6f62616c 7369676e 2e6e6574 2f636163 6572742f
6f726776 312e6372 74303f06 03551d1f 04383036 3034a032 a030862e 68747470
3a2f2f63 726c2e67 6c6f6261 6c736967 6e2e6e65 742f4f72 67616e69 7a617469
6f6e5661 6c312e63 726c301d 0603551d 0e041604 14d398d5 ddf29355 15b04750
baccc6b3 0f97a6c9 94302f06 03551d11 04283026 82247365 63757265 2d616363
6573732e 68656272 69646561 6e686f75 73696e67 2e636f2e 756b3009 0603551d
13040230 00300e06 03551d0f 0101ff04 04030205 a0302906 03551d25 04223020
06082b06 01050507 03010608 2b060105 05070302 060a2b06 01040182 370a0303
304b0603 551d2004 44304230 4006092b 06010401 a0320114 30333031 06082b06
01050507 02011625 68747470 3a2f2f77 77772e67 6c6f6261 6c736967 6e2e6e65
742f7265 706f7369 746f7279 2f301106 09608648 0186f842 01010404 030206c0
300d0609 2a864886 f70d0101 05050003 82010100 8af3be01 c4830d83 9b347355
de7496ef bd76b86c ee92f32f 1157ef11 6ad949b6 611537ad 81f06408 73ec6fe2
6466675c cf31a80f bead422d ec574f95 55fe0b7a 97e271e7 0220c7b1 53376843
ff7f7280 f9bfdee6 3584e123 00c37d9f 5004b766 9469ead5 f002744c fd50271c
6bcdb54c e5db85aa 9760a330 d72464a2 bc8ecdff d80bbc27 7551e97c ee9b7078
9207f9d6 b969a47a 6df722b6 14ce803d 8d4bb9e9 4695e8e6 d453950e 06506594
ec7652ea 365cdf94 90e2f7ee 855dadb5 c0459d73 bb6d01a8 3c076718 7f80de40
c5eb9e0e 17c93087 fd5c5fc1 fd6401fe 7e5038b1 3da1d250 01ccd8be 964d5557
b320c4c1 0015d1b7 daad7527 930b0c90 7711704f
quit
crypto ca certificate chain ASDM_TrustPoint1
certificate ca 0400000000011e44a5f52a
30820467 3082034f a0030201 02020b04 00000000 011e44a5 f52a300d 06092a86
4886f70d 01010505 00305731 0b300906 03550406 13024245 31193017 06035504
0a131047 6c6f6261 6c536967 6e206e76 2d736131 10300e06 0355040b 1307526f
6f742043 41311b30 19060355 04031312 476c6f62 616c5369 676e2052 6f6f7420
4341301e 170d3037 30343131 31323030 30305a17 0d313730 34313131 32303030
305a306a 31233021 06035504 0b131a4f 7267616e 697a6174 696f6e20 56616c69
64617469 6f6e2043 41311330 11060355 040a130a 476c6f62 616c5369 676e312e
302c0603 55040313 25476c6f 62616c53 69676e20 4f726761 6e697a61 74696f6e
2056616c 69646174 696f6e20 43413082 0122300d 06092a86 4886f70d 01010105
00038201 0f003082 010a0282 010100a1 2fc4bcce 8703e967 c189c8e5 93fc7db4
ad9ef663 4e6ae89c 2c7389a2 01f48f21 f8fd259d 58166d86 f6ee4957 757e75ea
22117e3d fbc74241 dcfcc50c 9155807b eb64331d 9bf9ca38 e9abc625 43512540
f4e47e18 556aa98f 103a401e d65783ef 7f2f342f 2dd2f653 c2190db7 edc981f5
462cb423 425e9d13 0375ecea 6afc577c c936973b 98dc1313 ecec41fa 5d34eab9
93e71016 65cc9c92 fdf5c59d 3e4ab909 fce45f1e 695f4df4 567244b1 1d2303c8
36f66588 c8bf3916 458e1e26 6c5116c5 2a0038c5 a4136995 7dab013b a8c414b4
80daac1a 4420d5fe a9067b14 27afe030 21dd90f4 a9d52319 2e1e03e6 c1df9529
e4c19443 dd3e90aa cb4bc9be 8ad33902 03010001 a382011f 3082011b 300e0603
551d0f01 01ff0404 03020106 30120603 551d1301 01ff0408 30060101 ff020100
301d0603 551d0e04 1604147d 6d2aec66 aba75136 ab0269f1 708fc459 0b9a1f30
4b060355 1d200444 30423040 06092b06 010401a0 32011430 33303106 082b0601
05050702 01162568 7474703a 2f2f7777 772e676c 6f62616c 7369676e 2e6e6574
2f726570 6f736974 6f72792f 30330603 551d1f04 2c302a30 28a026a0 24862268
7474703a 2f2f6372 6c2e676c 6f62616c 7369676e 2e6e6574 2f726f6f 742e6372
6c301106 09608648 0186f842 01010404 03020204 30200603 551d2504 19301706
0a2b0601 04018237 0a030306 09608648 0186f842 0401301f 0603551d 23041830
16801460 7b661a45 0d97ca89 502f7d04 cd34a8ff fcfd4b30 0d06092a 864886f7
0d010105 05000382 01010079 47fc15d7 4c79df0f 7a9eced4 7c4b63c9 89b57b3f
9912e89c 8c9a492f e04e954a edc7bcbe f1a2db8e 931dba71 54aa4bd9 89222487
c504a8ac 8252a052 f8b8e14f a1276663 214a39e7 c7c54e5f b2d61d13 6d30e9ce
d7a21cbc 290a733c 5b2349fe d6ffcab0 4ff5f267 98c04711 f8b748a6 9009d642
beeab1b9 5342c39c 20c9fba1 5bb5566d 8781c860 acc4b972 270a8e1e a8b12ecd
32a27857 b09cf895 bb438e8c 31866e53 0dc61205 ba416ea8 35300918 1d0261ff
fdee35de 6ac33bd0 4d4b4e50 b256360c 445dda1a 652ae698 56a96333 2e04e7ae
e8f48eb7 b2da7dc0 c8e2aea6 282fe3c9 73bdfc07 4134b7aa 6eeea7db d1933ced
90ec3292 88d9c823 6c7421
quit
crypto isakmp identity hostname
crypto isakmp enable outside
crypto isakmp policy 10
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 86400
crypto isakmp policy 30
authentication pre-share
encryption 3des
hash sha
group 1
lifetime 86400
telnet 0.0.0.0 0.0.0.0 inside
telnet timeout 5
ssh 187.187.1.41 255.255.255.255 inside
ssh 187.187.1.72 255.255.255.255 inside
ssh 187.187.77.81 255.255.255.255 inside
ssh 187.187.10.19 255.255.255.255 inside
ssh 187.187.10.229 255.255.255.255 inside
ssh 187.187.160.7 255.255.255.255 inside
ssh 187.187.1.41 255.255.255.255 outside
ssh 187.187.1.72 255.255.255.255 outside
ssh 187.187.77.81 255.255.255.255 outside
ssh 187.187.10.19 255.255.255.255 outside
ssh 187.187.10.229 255.255.255.255 outside
ssh 187.187.160.7 255.255.255.255 outside
ssh timeout 15
console timeout 0
vpdn group BT request dialout pppoe
vpdn group BT localname B*******.btclick.com
vpdn group BT ppp authentication chap
vpdn username B*******@hg39.btclick.com password *********
dhcpd auto_config outside
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
ssl trust-point ASDM_TrustPoint0 outside
ssl trust-point ASDM_TrustPoint0 outside vpnlb-ip
webvpn
enable inside
enable outside
group-policy HHP_Remote_Access_1 internal
group-policy HHP_Remote_Access_1 attributes
wins-server value 192.168.168.2 192.168.168.2
dns-server value 192.168.168.2 192.168.168.3
vpn-tunnel-protocol IPSec
split-tunnel-policy tunnelspecified
split-tunnel-network-list value CNES_Support_splitTunnelAcl
group-policy HHP_Remote_Access internal
group-policy HHP_Remote_Access attributes
wins-server value 192.168.168.2 192.168.168.2
dns-server value 192.168.168.2 192.168.168.3
vpn-tunnel-protocol IPSec
split-tunnel-policy tunnelspecified
split-tunnel-network-list value CNES_Support_splitTunnelAcl
group-policy Omfax internal
group-policy Omfax attributes
wins-server value 192.168.168.2 192.168.168.3
dns-server value 192.168.168.2 192.168.168.3
vpn-tunnel-protocol IPSec webvpn
webvpn
svc ask none default webvpn
group-policy MIS_1 internal
group-policy MIS_1 attributes
wins-server value 192.168.168.2 192.168.168.3
dns-server value 192.168.168.2 192.168.168.3
vpn-tunnel-protocol IPSec
split-tunnel-policy tunnelspecified
split-tunnel-network-list value MIS_splitTunnelAcl
default-domain value hhp.com
group-policy RemoteAccess internal
group-policy RemoteAccess attributes
wins-server value 192.168.168.2 192.168.168.3
dns-server value 192.168.168.2 192.168.168.3
vpn-tunnel-protocol IPSec
split-tunnel-policy tunnelspecified
split-tunnel-network-list value RemoteAccess_splitTunnelAcl
group-policy CNES_Access internal
group-policy CNES_Access attributes
wins-server value 192.168.168.2 192.168.168.3
dns-server value 192.168.168.2 192.168.168.3
vpn-tunnel-protocol IPSec
split-tunnel-policy tunnelspecified
split-tunnel-network-list value CNES_Support_splitTunnelAcl
group-policy HHP internal
group-policy HHP attributes
dhcp-network-scope none
vpn-access-hours none
vpn-idle-timeout none
vpn-session-timeout none
vpn-filter none
vpn-tunnel-protocol IPSec webvpn
password-storage disable
ip-comp disable
re-xauth disable
group-lock none
pfs disable
ipsec-udp disable
split-tunnel-policy tunnelall
split-tunnel-network-list none
split-dns none
secure-unit-authentication disable
user-authentication disable
user-authentication-idle-timeout none
ip-phone-bypass disable
leap-bypass disable
nem disable
backup-servers keep-client-config
client-firewall none
webvpn
url-list value Severs
filter none
homepage none
port-forward disable
http-proxy disable
sso-server none
svc dtls none
svc keep-installer none
svc rekey time none
svc rekey method none
svc dpd-interval client none
svc dpd-interval gateway none
svc compression none
svc modules none
svc profiles none
svc ask none default webvpn
customization none
http-comp none
user-storage none
storage-key none
hidden-shares none
smart-tunnel disable
activex-relay disable
file-entry disable
file-browsing disable
url-entry disable
deny-message none
group-policy MIS internal
group-policy MIS attributes
wins-server value 192.168.168.2 192.168.168.3
dns-server value 192.168.168.2 192.168.168.3
vpn-tunnel-protocol IPSec
split-tunnel-policy tunnelspecified
split-tunnel-network-list value MIS_splitTunnelAcl
username test password Kg/Rgy23do7gPGTv encrypted privilege 0
username test attributes
vpn-group-policy HHP_Remote_Access
username catneil password yOgiHCGobUNIkjcN encrypted privilege 0
username omfax password pvUaCLwilGmQVifd encrypted privilege 0
username backup password IHQbl.JAoESlM9Jv encrypted privilege 0
username misadmin password 8IZXmHa67HIJYHK1 encrypted
username misadmin attributes
service-type remote-access
username gramor password ne829U0rGFVEedhY encrypted privilege 15
username gramor attributes
vpn-group-policy HHP_Remote_Access
webvpn
url-list value Severs
username aim_user password 5OQaWCdB18qiHlOn encrypted privilege 0
username aim_user attributes
vpn-group-policy CNES_Support
username katask password 2WsX.HoqKXuiqkDk encrypted privilege 0
username katask attributes
vpn-group-policy CNES_Support
username janboyd password ZEUyykwzME6hII2i encrypted privilege 0
username marmor password C5n48AiRLXwxAeBQ encrypted privilege 0
username marste password amwTL584WdiT87Tb encrypted privilege 0
username helmah password RvU8c.3w0H3/MJz4 encrypted privilege 0
username anglea password wGlUJDBrmJI.uz./ encrypted privilege 0
username anglea attributes
vpn-group-policy CNES_Support
username fiobuc password 5Uispw90wqvDYerQ encrypted privilege 0
tunnel-group DefaultRAGroup general-attributes
authentication-server-group HHP_1
tunnel-group DefaultWEBVPNGroup general-attributes
authentication-server-group HHP_1
default-group-policy HHP
tunnel-group DefaultWEBVPNGroup webvpn-attributes
nbns-server 192.168.168.2 timeout 2 retry 2
nbns-server 192.168.168.3 timeout 2 retry 2
tunnel-group WebVPN type remote-access
tunnel-group WebVPN general-attributes
authentication-server-group HHP_3
default-group-policy HHP
username-from-certificate UID
tunnel-group CNES_Access -
So I have a weird problem that I'm hoping someone has a point in the right direction I can follow... At home I have a Cisco ASA 5505 - not very complex network some BCP configs and it's providing a NAT (PAT). I have a static IP and using a few RFC 1918 segments - like I said nothing earth shattering. I have a linksys E1200 802.11N WPA2 PSK - again pretty standard. I connect laptops, iPads, iPhones, Kindles, Androids no problem. Until recently my 60" Vizio had no issues using the network (wired or wireless). Now network is failing on the TV. I see it get to the FW and I can ping trace etc... to the TV. The FW logs show resets (log is below).
Now here is the real interesting part - if I turn the tether feature on my iPhone on and connect the TV to it - it works - what's even more interesting is if I then go back to the home network it all works again no problem until I reboot the TV... HELP!
Apr 19 15:34:09 192.168.10.254 %ASA-6-305011: Built dynamic TCP translation from inside:10.10.10.139/60657 to outside:68.162.222.142/57003
Apr 19 15:34:09 192.168.10.254 %ASA-6-302013: Built outbound TCP connection 61988 for outside:98.137.204.251/443 (98.137.204.251/443) to inside:10.10.10.139/60657 (68.162.222.142/57003)
Apr 19 15:34:09 192.168.10.254 %ASA-6-302014: Teardown TCP connection 61988 for outside:98.137.204.251/443 to inside:10.10.10.139/60657 duration 0:00:00 bytes 3689 TCP Reset-I
Apr 19 15:34:12 192.168.10.254 %ASA-6-305011: Built dynamic TCP translation from inside:10.10.10.139/60658 to outside:68.162.222.142/53332
Apr 19 15:34:12 192.168.10.254 %ASA-6-302013: Built outbound TCP connection 61989 for outside:98.137.204.251/443 (98.137.204.251/443) to inside:10.10.10.139/60658 (68.162.222.142/53332)
Apr 19 15:34:12 192.168.10.254 %ASA-6-305011: Built dynamic TCP translation from inside:10.10.10.139/37006 to outside:68.162.222.142/40015
Apr 19 15:34:12 192.168.10.254 %ASA-6-302013: Built outbound TCP connection 61990 for outside:98.136.10.32/443 (98.136.10.32/443) to inside:10.10.10.139/37006 (68.162.222.142/40015)
Apr 19 15:34:12 192.168.10.254 %ASA-6-302014: Teardown TCP connection 61989 for outside:98.137.204.251/443 to inside:10.10.10.139/60658 duration 0:00:00 bytes 3689 TCP Reset-I
Apr 19 15:34:12 192.168.10.254 %ASA-6-302014: Teardown TCP connection 61990 for outside:98.136.10.32/443 to inside:10.10.10.139/37006 duration 0:00:00 bytes 3689 TCP FINs
AHello ras,
As you mentioned the TV is sending a reset packet to the remote address. I will recommend you to create a capture of the traffic and review the traffic at the packet level to see a posible reason for the drop.
Here is how. Then you can download it to pcap format and uploaded to the forum for further analysis.
http://www.cisco.com/c/en/us/support/docs/security/asa-5500-x-series-next-generation-firewalls/110117-asa-capture-asdm-config.html
http://www.cisco.com/c/en/us/td/docs/security/asa/syslog-guide/syslogs/logmsgs.html#pgfId-6941209
Hope this information is helpful. -
10Mb Metro link between ASA 5505 and ASA 5510
Dear all,
I have encountered one difficult problem, I wished all expert could give my - newie some tips,
Environment
One ASA 5505 - ASA 7.2(1) and ASDM 5.2(1)
One ASA 5510 - ASA 7.2 (1) and ASDM 5.2(1)
These two firewall make site-to-site VPN connection
two ASA has three interface - the one is inside (security level is 100), the another is outside (security level is 0), the finally interface is metro (security level is also 100)
***** I didn't know why around 3 days to one week , these two ASA would hang and make all internal PC cannot access to internet, it need to uplug and replug power, and then the ASA resumed. I didn't know how to shooting this problem, is ASA version is old (7.2(1)), or other problem,
***** I didn't know how to see the log, in the matter of fact, I have already set up a syslog in the one windows server, but I see log, I found no any error log for ASA error or hang message, please everyone.To see the error logs on ASA; telnet to the device and after authentication give command "show log". This will display a long list of log messages. Point out to the log messages that have been logged at the time when the connection went down. Without the error message or syslog message it would not be possible to figure out the problem. Following link may help you to configure ASA for syslog
http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_configuration_example09186a00805a2e04.shtml -
Cisco ASA 5505 and comodo SSL certificate
Hey All,
I am having an issue with setting up the SSL certificate piece of the Cisco AnyConnect VPN. I purchased the certificate and installed it via the ASDM under Configuration > Remote Access VPN > Certificate Management > Identity Certificates. I also placed the CA 2 piece under the CA Certificates. I have http redirect to https and under my browser it is green.
Once the AnyConnect client installs and automatically connects i get no errors or anything. The minute I disconnect and try to reconnect again, I get the "Untrusted VPN Server Certificate!" which isn't true because the connection information is https://vpn.mydomain.com and the SSL Cert is setup as vpn.mydomain.com.
On that note it lists the IP address instead of the vpn.mydomain.com as the untrusted piece of this. Now obviously I don't have the IP address as part of the SSL cert, just the web address. On the web side I have an A record setup to go from vpn.mydomain.com to the IP address of the Cisco ASA.
What am I missing here? I can post config if anyone needs it.
(My Version of ASA Software is 9.0 (2) and ASDM Version 7.1 (2))It's AnyConnect version 3.0. I don't know about the EKU piece. I didn't know that was required. I will attach my config.
ASA Version 9.0(2)
hostname MyDomain-firewall-1
domain-name MyDomain.com
enable password omitted
xlate per-session deny tcp any4 any4
xlate per-session deny tcp any4 any6
xlate per-session deny tcp any6 any4
xlate per-session deny tcp any6 any6
xlate per-session deny udp any4 any4 eq domain
xlate per-session deny udp any4 any6 eq domain
xlate per-session deny udp any6 any4 eq domain
xlate per-session deny udp any6 any6 eq domain
passwd omitted
names
name 10.0.0.13.1 MyDomain-Inside description MyDomain Inside
name 10.200.0.0 MyDomain_New_IP description MyDomain_New
name 10.100.0.0 MyDomain-Old description Inside_Old
name XXX.XXX.XX.XX Provider description Provider_Wireless
name 10.0.13.2 Cisco_ASA_5505 description Cisco ASA 5505
name 192.168.204.0 Outside_Wireless description Outside Wireless for Guests
ip local pool MyDomain-Employee-Pool 192.168.208.1-192.168.208.254 mask 255.255.255.0
ip local pool MyDomain-Vendor-Pool 192.168.209.1-192.168.209.254 mask 255.255.255.0
interface Ethernet0/0
switchport access vlan 2
interface Ethernet0/1
interface Ethernet0/2
interface Ethernet0/3
interface Ethernet0/4
interface Ethernet0/5
interface Ethernet0/6
interface Ethernet0/7
interface Vlan1
nameif inside
security-level 100
ip address Cisco_ASA_5505 255.255.255.0
interface Vlan2
nameif outside
security-level 0
ip address Provider 255.255.255.252
boot system disk0:/asa902-k8.bin
ftp mode passive
clock timezone PST -8
clock summer-time PDT recurring
dns domain-lookup inside
dns server-group DefaultDNS
name-server 10.0.3.21
domain-name MyDomain.com
object network obj_any
subnet 0.0.0.0 0.0.0.0
object network MyDomain-Employee
subnet 192.168.208.0 255.255.255.0
description MyDomain-Employee
object-group network Inside-all
description All Networks
network-object MyDomain-Old 255.255.254.0
network-object MyDomain_New_IP 255.255.192.0
network-object host MyDomain-Inside
access-list inside_access_in extended permit ip any4 any4
access-list split-tunnel standard permit host 10.0.13.1
pager lines 24
logging enable
logging buffered errors
logging asdm informational
mtu inside 1500
mtu outside 1500
no failover
icmp unreachable rate-limit 1 burst-size 1
asdm image disk0:/asdm-712.bin
no asdm history enable
arp timeout 14400
no arp permit-nonconnected
nat (inside,outside) source static Inside-all Inside-all destination static RVP-Employee RVP-Employee no-proxy-arp route-lookup
object network obj_any
nat (inside,outside) dynamic interface
access-group inside_access_in in interface inside
route outside 0.0.0.0 0.0.0.0 XXX.XXX.XX.XX 1
route inside MyDomain-Old 255.255.254.0 MyDomain-Inside 1
route inside MyDomain_New_IP 255.255.192.0 MyDomain-Inside 1
route inside Outside_Wireless 255.255.255.0 MyDomain-Inside 1
timeout xlate 3:00:00
timeout pat-xlate 0:00:30
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
action terminate
dynamic-access-policy-record "Network Access Policy Allow VPN"
description "Must have the Network Access Policy Enabled to get VPN access"
aaa-server LDAP_Group protocol ldap
aaa-server LDAP_Group (inside) host 10.0.3.21
ldap-base-dn ou=MyDomain,dc=MyDomainnet,dc=local
ldap-group-base-dn ou=MyDomain,dc=MyDomainnet,dc=local
ldap-scope subtree
ldap-naming-attribute sAMAccountName
ldap-login-password *****
ldap-login-dn cn=Cisco VPN,ou=Special User Accounts,ou=MyDomain,dc=MyDomainNET,dc=local
server-type microsoft
user-identity default-domain LOCAL
aaa authentication ssh console LOCAL
http server enable
http MyDomain_New_IP 255.255.192.0 inside
http redirect outside 80
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
crypto ipsec ikev2 ipsec-proposal DES
protocol esp encryption des
protocol esp integrity sha-1 md5
crypto ipsec ikev2 ipsec-proposal 3DES
protocol esp encryption 3des
protocol esp integrity sha-1 md5
crypto ipsec ikev2 ipsec-proposal AES
protocol esp encryption aes
protocol esp integrity sha-1 md5
crypto ipsec ikev2 ipsec-proposal AES192
protocol esp encryption aes-192
protocol esp integrity sha-1 md5
crypto ipsec ikev2 ipsec-proposal AES256
protocol esp encryption aes-256
protocol esp integrity sha-1 md5
crypto ipsec security-association pmtu-aging infinite
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set ikev2 ipsec-proposal AES256 AES192 AES 3DES DES
crypto map outside_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP
crypto map outside_map interface outside
crypto ca trustpoint LOCAL-CA-SERVER
keypair LOCAL-CA-SERVER
no validation-usage
no accept-subordinates
no id-cert-issuer
crl configure
crypto ca trustpoint VPN
enrollment terminal
fqdn vpn.mydomain.com
subject-name CN=vpn.mydomain.com,OU=IT
keypair vpn.mydomain.com
crl configure
crypto ca trustpoint ASDM_TrustPoint1
enrollment terminal
crl configure
crypto ca trustpool policy
crypto ca server
shutdown
crypto ca certificate chain LOCAL-CA-SERVER
certificate ca 01
omitted
quit
crypto ca certificate chain VPN
certificate
omitted
quit
crypto ca certificate chain ASDM_TrustPoint1
certificate ca
omitted
quit
crypto ikev2 policy 1
encryption aes-256
integrity sha
group 5 2
prf sha
lifetime seconds 86400
crypto ikev2 policy 10
encryption aes-192
integrity sha
group 5 2
prf sha
lifetime seconds 86400
crypto ikev2 policy 20
encryption aes
integrity sha
group 5 2
prf sha
lifetime seconds 86400
crypto ikev2 policy 30
encryption 3des
integrity sha
group 5 2
prf sha
lifetime seconds 86400
crypto ikev2 policy 40
encryption des
integrity sha
group 5 2
prf sha
lifetime seconds 86400
crypto ikev2 enable outside client-services port 443
crypto ikev2 remote-access trustpoint VPN
telnet timeout 5
ssh MyDomain_New_IP 255.255.192.0 inside
ssh timeout 5
console timeout 0
threat-detection basic-threat
threat-detection statistics access-list
threat-detection statistics tcp-intercept rate-interval 30 burst-rate 400 average-rate 200
dynamic-filter updater-client enable
dynamic-filter use-database
dynamic-filter enable
ssl encryption rc4-sha1 aes128-sha1 aes256-sha1 3des-sha1 rc4-md5 des-sha1
ssl trust-point VPN outside
webvpn
enable outside
anyconnect-essentials
anyconnect image disk0:/anyconnect-macosx-i386-2.4.1012-k9.pkg 3
anyconnect image disk0:/anyconnect-linux-2.4.1012-k9.pkg 4
anyconnect image disk0:/anyconnect-win-3.1.01065-k9.pkg 5
anyconnect profiles MyDomain-employee disk0:/MyDomain-employee.xml
anyconnect enable
tunnel-group-list enable
group-policy DfltGrpPolicy attributes
dns-server value 10.0.3.21
vpn-tunnel-protocol ikev1 ikev2 l2tp-ipsec ssl-client
default-domain value MyDomain.com
group-policy MyDomain-Employee internal
group-policy MyDomain-Employee attributes
wins-server none
dns-server value 10.0.3.21
vpn-tunnel-protocol ssl-client
split-tunnel-policy tunnelspecified
split-tunnel-network-list value split-tunnel
default-domain value MyDomain.com
webvpn
anyconnect profiles value MyDomain-employee type user
username MyDomainadmin password omitted encrypted privilege 15
tunnel-group MyDomain-Employee type remote-access
tunnel-group MyDomain-Employee general-attributes
address-pool MyDomain-Employee-Pool
authentication-server-group LDAP_Group LOCAL
default-group-policy MyDomain-Employee
tunnel-group MyDomain-Employee webvpn-attributes
group-alias MyDomain-Employee enable
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum client auto
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
inspect ip-options
service-policy global_policy global
prompt hostname context
no call-home reporting anonymous
Cryptochecksum:1c7e3d7ff324e4fd7567aa21a96a8b22
: end
asdm image disk0:/asdm-712.bin
asdm location MyDomain_New_IP 255.255.192.0 inside
asdm location MyDomain-Inside 255.255.255.255 inside
asdm location MyDomain-Old 255.255.254.0 inside
no asdm history enable -
Hi all,
I need some help from someone who has experience with configuring VPN on ASA over 2Wire router setup as dmzplus.
Topology:
ASA 5505 ---- 2Wire (dmzplus) -------------- ( cloud ) -------------- 2Wire (dmzplus) ---- ASA 5505
BT is the ISP on both ends. Static IPs are currently forwarded to the firewalls on both ends (outside interface is DHCP client).
All other services are working as expected (static NAT for few ports and so on).
I have found on some other forums the solution is to setup router in full bridge mode and then configure PPPoE on ASA, but I am trying to avoid this (for few other reasons).
The weird thing is when I am trying to initiate tunnel traffic from site A I can see IKE peer responder from site B, but not the opposite.
IKE state is MM_WAIT_MSG2 so it’s not passing the phase one. What I also notice in the arp table despite only one IP is assigned per site, the BT router has IP one less than the public one.
So my questions are:
1. Do I missing something in the config?
2. Is it possible to setup VPN on ASA over dmzplus?
3. Does the BT PPPoA service will become PPPoE after changing 2Wire to bridge mode?
4. Is there any different workaround or alternative solution?
CONFIG (crypto policies and all different settings are mirrored on the other end so it doesn’t make sense to post both):
: Saved
ASA Version 8.2(5)
interface Ethernet0/0
switchport access vlan 2
interface Ethernet0/1
interface Ethernet0/2
interface Ethernet0/3
interface Ethernet0/4
interface Ethernet0/5
interface Ethernet0/6
interface Ethernet0/7
interface Vlan1
nameif inside
security-level 100
ip address 192.168.0.1 255.255.255.0
interface Vlan2
nameif outside
security-level 0
ip address dhcp setroute
ftp mode passive
access-list outside_in extended permit object-group PRS_PORTS any host 1.1.1.10
access-list outside_in extended permit object-group CCTV_PORTS any host 1.1.1.10
access-list VPN_traffic extended permit ip 192.168.0.0 255.255.255.0 192.168.1.0 255.255.255.0
access-list no-nat extended permit ip 192.168.0.0 255.255.255.0 192.168.1.0 255.255.255.0
pager lines 24
logging enable
logging buffered debugging
logging asdm informational
mtu inside 1500
mtu outside 1500
no failover
icmp unreachable rate-limit 1 burst-size 1
no asdm history enable
arp timeout 14400
global (outside) 1 interface
nat (inside) 0 access-list no-nat
nat (inside) 1 0.0.0.0 0.0.0.0
static (inside,outside) tcp interface <omitted>
static (inside,outside) tcp interface <omitted>
static (inside,outside) tcp interface <omitted>
static (inside,outside) tcp interface <omitted>
static (inside,outside) tcp interface <omitted>
static (inside,outside) tcp interface <omitted>
static (inside,outside) tcp interface <omitted>
static (inside,outside) tcp interface <omitted>
static (inside,outside) tcp interface <omitted>
static (inside,outside) tcp interface <omitted>
static (inside,outside) tcp interface <omitted>
access-group outside_in in interface outside
route outside 0.0.0.0 0.0.0.0 1.1.1.9 1 (points
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
aaa authentication enable console LOCAL
aaa authentication ssh console LOCAL
aaa authentication http console LOCAL
http server enable
http 192.168.1.0 255.255.255.0 inside
http 192.168.0.0 255.255.255.0 inside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
crypto ipsec transform-set L2LVPN esp-3des esp-md5-hmac
crypto ipsec security-association lifetime seconds 28800
crypto ipsec security-association lifetime kilobytes 4608000
crypto map L2LCRYPTO 10 match address VPN_traffic
crypto map L2LCRYPTO 10 set peer 2.2.2.10
crypto map L2LCRYPTO 10 set transform-set L2LVPN
crypto map L2LCRYPTO interface outside
crypto ca trustpoint ASDM_TrustPoint0
enrollment self
subject-name CN=ciscoasa
crl configure
crypto ca certificate chain ASDM_TrustPoint0
certificate 569bb150
<omitted>
quit
crypto isakmp identity address
crypto isakmp enable outside
crypto isakmp policy 10
authentication pre-share
encryption 3des
hash md5
group 2
lifetime 86400
telnet timeout 5
ssh <omitted>
ssh timeout 15
console timeout 0
management-access inside
dhcpd dns 194.72.0.98 194.74.65.68
dhcpd auto_config outside
dhcpd address 192.168.0.2-192.168.0.33 inside
dhcpd enable inside
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
ntp server 84.45.87.84 source outside prefer
webvpn
tunnel-group <2.2.2.10> type ipsec-l2l
tunnel-group <2.2.2.10> ipsec-attributes
pre-shared-key *****
isakmp keepalive threshold 100 retry 2
ISAKMP debug:
Feb 19 03:25:25 [IKEv1 DEBUG]: IP = <dest_ip>, IKE SA MM:8021bed6 terminating: flags 0x01000022, refcnt 0, tuncnt 0
Feb 19 03:25:25 [IKEv1 DEBUG]: IP = <dest_ip>, sending delete/delete with reason message
Feb 19 03:25:28 [IKEv1]: IP = <dest_ip>, IKE_DECODE RESENDING Message (msgid=0) with payloads : HDR + SA (1) + VENDOR (13) + VENDOR (13) + NONE (0) total length : 128
Feb 19 03:25:33 [IKEv1 DEBUG]: Pitcher: received a key acquire message, spi 0x0
Feb 19 03:25:33 [IKEv1]: IP = <dest_ip>, Queuing KEY-ACQUIRE messages to be processed when P1 SA is complete.
Feb 19 03:25:33 [IKEv1 DEBUG]: Pitcher: received a key acquire message, spi 0x0
Feb 19 03:25:33 [IKEv1]: IP = <dest_ip>, Queuing KEY-ACQUIRE messages to be processed when P1 SA is complete.
Feb 19 03:25:36 [IKEv1]: IP = <dest_ip>, IKE_DECODE RESENDING Message (msgid=0) with payloads : HDR + SA (1) + VENDOR (13) + VENDOR (13) + NONE (0) total length : 128
Feb 19 03:25:44 [IKEv1 DEBUG]: Pitcher: received a key acquire message, spi 0x0
Feb 19 03:25:44 [IKEv1]: IP = <dest_ip>, Queuing KEY-ACQUIRE messages to be processed when P1 SA is complete.
Feb 19 03:25:44 [IKEv1 DEBUG]: Pitcher: received a key acquire message, spi 0x0
Feb 19 03:25:44 [IKEv1]: IP = <dest_ip>, Queuing KEY-ACQUIRE messages to be processed when P1 SA is complete.
Feb 19 03:25:44 [IKEv1]: IP = <dest_ip>, IKE_DECODE RESENDING Message (msgid=0) with payloads : HDR + SA (1) + VENDOR (13) + VENDOR (13) + NONE (0) total length : 128
Feb 19 03:25:52 [IKEv1 DEBUG]: IP = <dest_ip>, IKE MM Responder FSM error history (struct &0xc6dc3588) <state>, <event>: MM_DONE, EV_ERROR-->MM_WAIT_MSG3, EV_TIMEOUT-->MM_WAIT_MSG3, NullEvent-->MM_SND_MSG2, EV_SND_MSG-->MM_SND_MSG2, EV_START_TMR-->MM_SND_MSG2, EV_RESEND_MSG-->MM_WAIT_MSG3, EV_TIMEOUT-->MM_WAIT_MSG3, NullEvent
Feb 19 03:25:52 [IKEv1 DEBUG]: IP = <dest_ip>, IKE SA MM:a22d74b8 terminating: flags 0x01000002, refcnt 0, tuncnt 0
Feb 19 03:25:52 [IKEv1 DEBUG]: IP = <dest_ip>, sending delete/delete with reason message
Feb 19 03:25:54 [IKEv1 DEBUG]: Pitcher: received a key acquire message, spi 0x0
Feb 19 03:25:54 [IKEv1]: IP = <dest_ip>, IKE Initiator: New Phase 1, Intf inside, IKE Peer <dest_ip> local Proxy Address 192.168.0.0, remote Proxy Address 192.168.1.0, Crypto map (L2LCRYPTO)
Feb 19 03:25:54 [IKEv1 DEBUG]: Pitcher: received a key acquire message, spi 0x0
Feb 19 03:25:54 [IKEv1]: IP = <dest_ip>, Queuing KEY-ACQUIRE messages to be processed when P1 SA is complete.
Feb 19 03:25:54 [IKEv1 DEBUG]: IP = <dest_ip>, constructing ISAKMP SA payload
Feb 19 03:25:54 [IKEv1 DEBUG]: IP = <dest_ip>, constructing NAT-Traversal VID ver 02 payload
Feb 19 03:25:54 [IKEv1 DEBUG]: IP = <dest_ip>, constructing NAT-Traversal VID ver 03 payload
Feb 19 03:25:54 [IKEv1 DEBUG]: IP = <dest_ip>, constructing NAT-Traversal VID ver RFC payload
Feb 19 03:25:54 [IKEv1 DEBUG]: IP = <dest_ip>, constructing Fragmentation VID + extended capabilities payload
Feb 19 03:25:54 [IKEv1]: IP = <dest_ip>, IKE_DECODE SENDING Message (msgid=0) with payloads : HDR + SA (1) + VENDOR (13) + VENDOR (13) + VENDOR (13) + VENDOR (13) + NONE (0) total length : 168
Feb 19 03:25:57 [IKEv1 DEBUG]: Pitcher: received a key acquire message, spi 0x0
Feb 19 03:25:57 [IKEv1]: IP = <dest_ip>, Queuing KEY-ACQUIRE messages to be processed when P1 SA is complete.
Feb 19 03:26:02 [IKEv1]: IP = <dest_ip>, IKE_DECODE RESENDING Message (msgid=0) with payloads : HDR + SA (1) + VENDOR (13) + VENDOR (13) + VENDOR (13) + VENDOR (13) + NONE (0) total length : 168
Feb 19 03:26:07 [IKEv1 DEBUG]: Pitcher: received a key acquire message, spi 0x0
Feb 19 03:26:07 [IKEv1]: IP = <dest_ip>, Queuing KEY-ACQUIRE messages to be processed when P1 SA is complete.
Feb 19 03:26:10 [IKEv1]: IP = <dest_ip>, IKE_DECODE RESENDING Message (msgid=0) with payloads : HDR + SA (1) + VENDOR (13) + VENDOR (13) + VENDOR (13) + VENDOR (13) + NONE (0) total length : 168
Feb 19 03:26:17 [IKEv1 DEBUG]: Pitcher: received a key acquire message, spi 0x0
Feb 19 03:26:17 [IKEv1]: IP = <dest_ip>, Queuing KEY-ACQUIRE messages to be processed when P1 SA is complete.
Feb 19 03:26:18 [IKEv1]: IP = <dest_ip>, IKE_DECODE RESENDING Message (msgid=0) with payloads : HDR + SA (1) + VENDOR (13) + VENDOR (13) + VENDOR (13) + VENDOR (13) + NONE (0) total length : 168
Feb 19 03:26:26 [IKEv1 DEBUG]: IP = <dest_ip>, IKE MM Initiator FSM error history (struct &0xc6aa7940) <state>, <event>: MM_DONE, EV_ERROR-->MM_WAIT_MSG2, EV_RETRY-->MM_WAIT_MSG2, EV_TIMEOUT-->MM_WAIT_MSG2, NullEvent-->MM_SND_MSG1, EV_SND_MSG-->MM_SND_MSG1, EV_START_TMR-->MM_SND_MSG1, EV_RESEND_MSG-->MM_WAIT_MSG2, EV_RETRY
Feb 19 03:26:26 [IKEv1 DEBUG]: IP = <dest_ip>, IKE SA MM:2e549563 terminating: flags 0x01000022, refcnt 0, tuncnt 0
Feb 19 03:26:26 [IKEv1 DEBUG]: IP = <dest_ip>, sending delete/delete with reason message
Feb 19 03:26:32 [IKEv1 DEBUG]: Pitcher: received a key acquire message, spi 0x0
Feb 19 03:26:32 [IKEv1]: IP = <dest_ip>, IKE Initiator: New Phase 1, Intf inside, IKE Peer <dest_ip> local Proxy Address 192.168.0.0, remote Proxy Address 192.168.1.0, Crypto map (L2LCRYPTO)
Feb 19 03:26:32 [IKEv1 DEBUG]: Pitcher: received a key acquire message, spi 0x0
Feb 19 03:26:32 [IKEv1]: IP = <dest_ip>, Queuing KEY-ACQUIRE messages to be processed when P1 SA is complete.
Feb 19 03:26:32 [IKEv1 DEBUG]: IP = <dest_ip>, constructing ISAKMP SA payload
Feb 19 03:26:32 [IKEv1 DEBUG]: IP = <dest_ip>, constructing NAT-Traversal VID ver 02 payload
Feb 19 03:26:32 [IKEv1 DEBUG]: IP = <dest_ip>, constructing NAT-Traversal VID ver 03 payload
Feb 19 03:26:32 [IKEv1 DEBUG]: IP = <dest_ip>, constructing NAT-Traversal VID ver RFC payload
Feb 19 03:26:32 [IKEv1 DEBUG]: IP = <dest_ip>, constructing Fragmentation VID + extended capabilities payload
Feb 19 03:26:32 [IKEv1]: IP = <dest_ip>, IKE_DECODE SENDING Message (msgid=0) with payloads : HDR + SA (1) + VENDOR (13) + VENDOR (13) + VENDOR (13) + VENDOR (13) + NONE (0) total length : 168
Feb 19 03:26:40 [IKEv1]: IP = <dest_ip>, IKE_DECODE RESENDING Message (msgid=0) with payloads : HDR + SA (1) + VENDOR (13) + VENDOR (13) + VENDOR (13) + VENDOR (13) + NONE (0) total length : 168
Feb 19 03:26:43 [IKEv1 DEBUG]: Pitcher: received a key acquire message, spi 0x0
Feb 19 03:26:43 [IKEv1]: IP = <dest_ip>, Queuing KEY-ACQUIRE messages to be processed when P1 SA is complete.
Feb 19 03:26:43 [IKEv1 DEBUG]: Pitcher: received a key acquire message, spi 0x0
Feb 19 03:26:43 [IKEv1]: IP = <dest_ip>, Queuing KEY-ACQUIRE messages to be processed when P1 SA is complete.
no debug crypto isakmp 127 Feb 19 03:26:48 [IKEv1]: IP = <dest_ip>, IKE_DECODE RESENDING Message (msgid=0) with payloads : HDR + SA (1) + VENDOR (13) + VENDOR (13) + VENDOR (13) + VENDOR (13) + NONE (0) totano debug crypto isakmp 127 Feb 19 03:26:53 [IKEv1 DEBUG]: Pitcher: received a key acquire message, spi 0x0
Feb 19 03:26:53 [IKEv1]: IP = <dest_ip>, Queuing KEY-ACQUIRE messages to be processed when P1 SA is complete.
Feb 19 03:26:53 [IKEv1 DEBUG]: Pitcher: received a key acquire message, spi 0x0
Feb 19 03:26:53 [IKEv1]: IP = <dest_ip>, Queuing KEY-ACQUIRE messages to be processed when P1 SA is complete.
Kind regards
MariuszHi all,
The latest update
I've finally managed to get the VPN to work! As soon as I've reconfigure the router and the firewall it took 1 second to establish the tunnel. So the answer for the most important question number 2. Is it possible to setup VPN on ASA over dmzplus? is no. I think the issue is related to routing which doesn't look normal with the dmzplus (can't properly traceroute to IPs etc)
So my solution was :
- changed 2Wire settings (Bridged LLC, ATM PVC disabled, Connection type: direct IP, save and uncheck Routing mode)
- changed ASA external interface settings to pppoe with automatic routing and IP
Regards
Mariusz -
Problem with VPN by ASA 5505 and PIX 501
Hi
I have this scenario: Firewall ASA 5505, Firewall Pix 501 (with CatOS 6.3(5) ).
I have configured this appliance for Easy VPN (server is ASA) and PIX, and remote Access with Cisco client vpn (for internal lan ASA).
When i configure the ASA i have this problem, when i configure nat for easy vpn.
This is my nat configuration:
nat (inside) 0 access-list 100
nat (inside) 1 192.168.1.0 255.255.255.0
nat (inside) 1 0.0.0.0 0.0.0.0
nat (inside) 0 0.0.0.0 0.0.0.0 outside
when i put this command:
nat (inside) 0 access-list no-nat
this command is necessary for configuration of easy vpn, but the previous nat:
nat (inside) 0 access-list 100
is replace with the latest command.To identify addresses on one interface that are translated to mapped addresses on another interface, use the nat command in global configuration mode. This command configures dynamic NAT or PAT, where an address is translated to one of a pool of mapped addresses. To remove the nat command, use the no form of this command.
For regular dynamic NAT:
nat (real_ifc) nat_id real_ip [mask [dns] [outside] [udp udp_max_conns] [norandomseq]]
no nat (real_ifc) nat_id real_ip [mask [dns] [outside] [udp udp_max_conns] [norandomseq]]
For policy dynamic NAT and NAT exemption:
nat (real_ifc) nat_id access-list access_list_name [dns] [outside] [udp udp_max_conns] [norandomseq]
no nat (real_ifc) nat_id access-list access_list_name [dns] [outside] [udp udp_max_conns] [norandomseq] -
Cisco ASA 5505 and Airport Extreme
We have an office that uses an Airport Extreme as part of the network. The Airport Extreme uses a Cisco ASA 5505 as its gateway. The Cisco provides site to site VPN capabilities with other remote offices. We just got this configuration partially working and it works great for outbound connections.
But I have been unable to get an inbound connection to machines that are behind the Airport Extreme.
The goal is to access machines behind the Airport Extreme by way of RDP and also for use as drive and printer shares.
What do I need to do on the Airport to achieve this goal?
Thank you,
LebbyLebby,
I suspect it's not the AX that's the problem but the Cisco router, no doubt you have NAT enabled on that so that any inbound connection not initiated from inside just get's blocked.
You'll need to configure NAT on the Cisco first.
Regards,
Shawn -
CIsco ASA 5505 and VPN licenses
Hi,
Cisco ASA 5505 comes with 10 VPN licenses in a standard configuration.
How those licenses are counted? Will I need a license per one IPSec SA?
If I have two site connected with LAN-to-LAN VPN with 10 subnets at one site, how many licenses will be taken? 10 - one per IPSec SA or just 1 - one per point-to-point VPN?
Thank you.
Regards,
AlexAlex,
In an ASA 5505, it should say something like this...when you do sh ver.
VPN Peers : 25
It means that you can have so many peers connecting to the ASA. Its not per IPSec SA.
Its a per tunnel license.
Rate this, if it helps!
Gilbert -
VPN Between Cisco ASA 5505 and Cisco Router 881
Hi All,
I want to interconnect two office to each other but i have trouble: Please see below my configuration: What is missing to finalize the configuration properly?
Cisco ASA 5505.
Version 8.4(3)
HQ-ASA5505(config)# crypto ikev1 policy 888
HQ-ASA5505(config-ikev1-policy)# authentication pre-share
HQ-ASA5505(config-ikev1-policy)# encryption 3des
HQ-ASA5505(config-ikev1-policy)# hash md5
HQ-ASA5505(config-ikev1-policy)# lifetime 86400
HQ-ASA5505(config-ikev1-policy)# group 2
HQ-ASA5505(config)# tunnel-group 1.1.1.1 type ipsec-l2l
HQ-ASA5505(config)# tunnel-group 1.1.1.1 ipsec-attributes
HQ-ASA5505(config-tunnel-ipsec)# ikev1 pre-shared-key test
HQ-ASA5505(config)#object network HQ-Users
HQ-ASA5505(config-network-object)#subnet 10.48.0.0 255.255.255.0
HQ-ASA5505(config)# object-group network HQ.grp
HQ-ASA5505(config-network-object-group)# network-object object HQ-Users
HQ-ASA5505(config)#object network FSP_DATA
HQ-ASA5505(config-network-object)#subnet 10.48.12.0 255.255.255.0
HQ-ASA5505(config)#object-group network FSP.grp
HQ-ASA5505(config-network-object-group)#network-object object FSP_DATA
HQ-ASA5505(config)#access-list VPN_to_FSP extended permit ip object-group HQ.grp object-group FSP.grp
HQ-ASA5505(config)# crypto ipsec ikev1 transform-set TS esp-3des esp-md5-hmac
HQ-ASA5505(config)# crypto map ouside_map 888 set ikev1 transform-set TS
HQ-ASA5505(config)# crypto map ouside_map 888 match address VPN_to_FSP
HQ-ASA5505(config)# crypto map ouside_map 888 set peer 1.1.1.1
HQ-ASA5505(config)# crypto map ouside_map 888 set pfs group2
HQ-ASA5505(config)# crypto ikev1 enable outside
HQ-ASA5505(config)# crypto map ouside_map interface outside
Router 881
Version 12.4
License Information for 'c880-data'
License Level: advipservices Type: Permanent
Next reboot license Level: advipservices
LAB_ROuter(config)#object-group network HQ
LAB_ROuter(config-network-group)#10.48.0.0 255.255.255.0
LAB_ROuter(config)#object-group network FSP
LAB_ROuter(config-network-group)#10.48.12.0 255.255.255.0
ip access-list extended FSP_VPN
permit ip object-group FSP object-group HQ
LAB_ROuter(config)#crypto isakmp policy 888
LAB_ROuter(config-isakmp)#encryption 3des
LAB_ROuter(config-isakmp)#authentication pre-share
LAB_ROuter(config-isakmp)#hash md5
LAB_ROuter(config-isakmp)#group 2
LAB_ROuter(config-isakmp)#lifetime 86400
LAB_ROuter(config)#crypto isakmp key test address 2.2.2.2
LAB_ROuter(config)#crypto ipsec transform-set TS esp-3des esp-md5-hmac
crypto map outside_map 888 ipsec-isakmp
set peer 2.2.2.2
set transform-set TS
match address FSP_VPN
interface fast4 --> Outside Interface (where public IP address is assigned)
crypto map outside_map
Thank you in advance for your prompt advice!If you do a show crypto map in the router you will see the VPN traffic to be "any to any".
This is due a known bug on Cisco routers. The router does not support object-groups network for the VPN traffic. Use a regular ACL instead. -
Cisco Asa 5505 and Layer 3 Switch With Remote VPN Access
i got today a new CISCO LAYER 3 Switch .. so here is my scenrio
Cisco Asa 5505
I
Outside == 155.155.155.x
Inside = 192.168.7.1
VPN POOL Address = 10.10.10.1 - 10.10.10.20
Layer 3 Switch Config
Vlan 2
interface ip address = 192.168.1.1
Vlan 2
interface ip address = 192.168.2.1
Vlan 2
interface ip address = 192.168.3.1
Vlan 2
interface ip address = 192.168.4.1
Vlan 2
interface ip address = 192.168.5.1
ip Routing
So i want My Remote Access VPN clients to access all this Networks. So Please can you give me a helpfull trick or Link to configure the rest of my routing
Thank You allWhen My Remote VPN is Connected , it reaches 192.168.7.2 of the Layer 3 VLan that's Connected to The ASA 5505 ,
But i can't reach the rest of the VLAN - example
192.168.1.1
192.168.1.2
192.168.1.3
192.168.1.4
192.168.1.5
But i can reach the Connected Interface Vlan to My ASA ..
So here i think iam miss configuration to my Route
Any Help Please this is urgent -
S2S between Cisco ASA 5505 and Sonicwall TZ-170 but not able to ping across
Hi,
I am helping out a friend of mine with his Site-to-Site VPN between his companies Cisco ASA another company's SonicWall TZ-170. I have checked the screenshots proivded by the other end and tried to match with ours. The Tunnel shows but we are not able to Ping resources on the other end. The other side insists that the problem is on our end but I am not sure where the issue resides. Please take a look at our config and let me know if there is anything that I have missed. I am pretty sure I didn't but extra eyes may be of need here.
Our LAN is 10.200.x.x /16 and theirs is 192.168.9.0 /24
ASA Version 8.2(2)
terminal width 300
hostname company-asa
domain-name Company.com
no names
name 10.1.0.0 sacramento-network
name 10.3.0.0 irvine-network
name 10.2.0.0 portland-network
name x.x.x.x MailLive
name 192.168.9.0 revit-vpn-remote-subnet
dns-guard
interface Ethernet0/0
nameif outside
security-level 0
ip address x.x.x.x 255.255.255.128
interface Ethernet0/1
nameif inside
security-level 100
ip address 10.200.200.1 255.255.0.0
interface Ethernet0/2
nameif dmz
security-level 50
ip address 172.22.22.1 255.255.255.0
interface Ethernet0/3
description Internal Wireless
shutdown
nameif Wireless
security-level 100
ip address 10.201.201.1 255.255.255.0
interface Management0/0
shutdown
nameif management
security-level 100
no ip address
management-only
boot system disk0:/asa822-k8.bin
ftp mode passive
clock timezone PST -8
clock summer-time PDT recurring
dns domain-lookup outside
dns server-group DefaultDNS
domain-name company.com
same-security-traffic permit inter-interface
same-security-traffic permit intra-interface
object-group network local_net_group
network-object 10.1.0.0 255.255.0.0
network-object 10.2.0.0 255.255.0.0
network-object 10.200.0.0 255.255.0.0
network-object 10.3.0.0 255.255.0.0
network-object 10.4.0.0 255.255.0.0
network-object 10.5.0.0 255.255.0.0
network-object 10.6.0.0 255.255.0.0
network-object 10.7.0.0 255.255.0.0
network-object 192.168.200.0 255.255.255.0
object-group network NACIO123
network-object 1.1.1.1 255.255.255.224
object-group service MAIL_HTTPS_BORDERWARE tcp
port-object eq smtp
port-object eq https
port-object eq 10101
object-group service SYSLOG_SNMP_NETFLOW udp
port-object eq syslog
port-object eq snmp
port-object eq 2055
object-group service HTTP_HTTPS tcp
port-object eq www
port-object eq https
object-group network OUTSIDECO_SERVERS
network-object host x.x.x.34
network-object host x.x.x.201
network-object host x.x.x.63
object-group network NO-LOG
network-object host 10.200.200.13
network-object host 10.200.200.25
network-object host 10.200.200.32
object-group service iPhoneSync-Services-TCP tcp
port-object eq 993
port-object eq 990
port-object eq 998
port-object eq 5678
port-object eq 5721
port-object eq 26675
object-group service termserv tcp
description terminal services
port-object eq 3389
object-group protocol TCPUDP
protocol-object udp
protocol-object tcp
object-group service DTI tcp
description DCS CONTROL PROTOCOL
port-object eq 3333
object-group service H.245 tcp
description h.245 signaling
port-object range 1024 4999
object-group service RAS udp
port-object eq 1719
port-object range 1718 1720
object-group service XML tcp
port-object range 3336 3341
object-group service mpi tcp
port-object eq 2010
object-group service mvp_control tcp
port-object eq 2946
object-group service rpc tcp-udp
port-object eq 1809
object-group service tcp8080 tcp
port-object eq 8080
object-group service tcp8011 tcp
port-object eq 8011
object-group service rtp_rtcp_udp udp
port-object range 1024 65535
object-group service ecs_xml tcp-udp
port-object eq 3271
object-group service rtp20000 udp
description 10000-65535
port-object range 20000 25000
port-object range 10000 65535
object-group service tcp5222 tcp
port-object range 5222 5269
object-group service tcp7070 tcp
port-object eq 7070
object-group network videoco
network-object host x.x.x.144
network-object host x.x.x.145
object-group service video tcp
port-object range 1718 h323
object-group service XML2 tcp-udp
port-object range 3336 3345
object-group service tcp_tls tcp
port-object eq 5061
object-group service Autodesk tcp
port-object eq 2080
port-object range 27000 27009
access-list outside_policy remark ====== Begin Mail From Postini Network ======
access-list outside_policy extended permit tcp x.x.x.x 255.255.240.0 host x.x.x.x eq smtp
access-list outside_policy extended permit tcp x.x.x.x 255.255.255.240 host x.x.x.x eq smtp
access-list outside_policy extended permit tcp x.x.x.0 255.255.240.0 host x.x.x.x eq smtp
access-list outside_policy remark ****** End Mail From Postini Network ******
access-list outside_policy remark ====== Begin Inbound Web Mail Access ======
access-list outside_policy extended permit tcp any host x.x.x.x object-group HTTP_HTTPS
access-list outside_policy remark ****** End Inbound Web Mail Access ******
access-list outside_policy remark ====== Begin iPhone Sync Rules to Mail Server ======
access-list outside_policy extended permit tcp any host x.x.x.x object-group iPhoneSync-Services-TCP
access-list outside_policy remark ****** End iPhone Sync Rules to Mail Server ******
access-list outside_policy remark ====== Begin MARS Monitoring ======
access-list outside_policy extended permit udp x.x.x.x 255.255.255.128 host x.x.x.x object-group SYSLOG_SNMP_NETFLOW
access-list outside_policy extended permit icmp x.x.x.x 255.255.255.128 host x.x.x.x
access-list outside_policy remark ****** End MARS Monitoring ******
access-list outside_policy extended permit tcp object-group NACIO123 host x.x.x.141 eq ssh
access-list outside_policy extended permit tcp any host x.x.x.x eq www
access-list outside_policy extended permit tcp any host x.x.x.x eq https
access-list outside_policy extended permit tcp any host x.x.x.x eq h323
access-list outside_policy extended permit tcp any host x.x.x.x range 60000 60001
access-list outside_policy extended permit udp any host x.x.x.x range 60000 60007
access-list outside_policy remark radvision 5110 port 80 both
access-list outside_policy extended permit object-group TCPUDP any object-group videoco eq www
access-list outside_policy remark radvision
access-list outside_policy extended permit tcp any object-group videoco object-group termserv
access-list outside_policy remark radvision 5110 port21 out
access-list outside_policy extended permit tcp any object-group videoco eq ftp
access-list outside_policy remark rad5110 port22 both
access-list outside_policy extended permit tcp any object-group videoco eq ssh
access-list outside_policy remark rad 5110 port161 udp both
access-list outside_policy extended permit udp any object-group videoco eq snmp
access-list outside_policy remark rad5110 port443 both
access-list outside_policy extended permit tcp any object-group videoco eq https
access-list outside_policy remark rad5110 port 1024-4999 both
access-list outside_policy extended permit tcp any object-group videoco object-group H.245
access-list outside_policy remark rad5110 port 1719 udp both
access-list outside_policy extended permit udp any object-group videoco object-group RAS
access-list outside_policy remark rad5110 port 1720 both
access-list outside_policy extended permit tcp any any eq h323
access-list outside_policy remark RAD 5110 port 3333 tcp both
access-list outside_policy extended permit tcp any object-group videoco object-group DTI
access-list outside_policy remark rad5110 port 3336-3341 both
access-list outside_policy extended permit object-group TCPUDP any object-group videoco object-group XML2
access-list outside_policy remark port 5060 tcp/udp
access-list outside_policy extended permit object-group TCPUDP any object-group videoco eq sip
access-list outside_policy remark rad 5110port 1809 rpc both
access-list outside_policy extended permit object-group TCPUDP any object-group videoco object-group rpc
access-list outside_policy remark rad 5110 port 2010 both
access-list outside_policy extended permit tcp any object-group videoco object-group mpi
access-list outside_policy remark rad 5110 port 2946 both
access-list outside_policy extended permit tcp any object-group videoco object-group mvp_control
access-list outside_policy extended permit tcp any object-group videoco object-group tcp8080
access-list outside_policy extended permit tcp any object-group videoco object-group tcp8011
access-list outside_policy remark 1024-65535
access-list outside_policy extended permit udp any object-group videoco object-group rtp_rtcp_udp
access-list outside_policy extended permit object-group TCPUDP any object-group videoco object-group ecs_xml
access-list outside_policy extended permit udp any object-group videoco object-group rtp20000
access-list outside_policy extended permit tcp any object-group videoco eq telnet
access-list outside_policy remark port 53 dns
access-list outside_policy extended permit object-group TCPUDP any object-group videoco eq domain
access-list outside_policy remark 7070
access-list outside_policy extended permit tcp any object-group videoco object-group tcp7070
access-list outside_policy remark 5222-5269 tcp
access-list outside_policy extended permit tcp any object-group videoco range 5222 5269
access-list outside_policy extended permit tcp any object-group videoco object-group video
access-list outside_policy extended permit tcp any object-group videoco object-group tcp_tls
access-list outside_policy remark ====== Begin Autodesk Activation access ======
access-list outside_policy extended permit tcp any any object-group Autodesk
access-list outside_policy remark ****** End Autodesk Activation access ******
access-list outside_policy extended permit tcp x.x.x.x 255.255.255.248 host x.x.x.x eq smtp
access-list outside_policy remark ****** End Autodesk Activation access ******
access-list inside_policy extended deny tcp host 10.200.200.25 10.1.0.0 255.255.0.0 eq 2967 log disable
access-list inside_policy extended deny tcp host 10.200.200.25 10.3.0.0 255.255.0.0 eq 2967 log disable
access-list inside_policy extended deny tcp host 10.200.200.25 10.2.0.0 255.255.0.0 eq 2967 log disable
access-list inside_policy extended deny tcp host 10.200.200.25 10.4.0.0 255.255.0.0 eq 2967 log disable
access-list inside_policy extended deny tcp host 10.200.200.25 10.5.0.0 255.255.0.0 eq 2967 log disable
access-list inside_policy extended deny udp object-group NO-LOG any eq 2967 log disable
access-list inside_policy extended deny tcp object-group NO-LOG any eq 2967 log disable
access-list inside_policy remark ====== Begin Outbound Mail Server Rules ======
access-list inside_policy extended permit udp host 10.200.200.222 any eq 5679
access-list inside_policy extended permit tcp host 10.200.200.222 any eq smtp
access-list inside_policy remark ****** End Outbound Mail Server Rules ******
access-list inside_policy extended permit ip object-group local_net_group any
access-list inside_policy extended permit icmp object-group local_net_group any
access-list OUTSIDECO_VPN extended permit ip host x.x.x.x object-group OUTSIDECO_SERVERS
access-list company-split-tunnel standard permit 10.1.0.0 255.255.0.0
access-list company-split-tunnel standard permit 10.2.0.0 255.255.0.0
access-list company-split-tunnel standard permit 10.3.0.0 255.255.0.0
access-list company-split-tunnel standard permit 10.4.0.0 255.255.0.0
access-list company-split-tunnel standard permit 10.200.0.0 255.255.0.0
access-list company-split-tunnel standard permit 10.5.0.0 255.255.0.0
access-list company-split-tunnel standard permit 10.6.0.0 255.255.0.0
access-list company-split-tunnel standard permit 10.7.0.0 255.255.0.0
access-list company-split-tunnel standard permit 172.22.22.0 255.255.255.0
access-list company-split-tunnel remark Video
access-list company-split-tunnel standard permit 192.168.0.0 255.255.0.0
access-list SSL_SPLIT standard permit 10.1.0.0 255.255.0.0
access-list SSL_SPLIT standard permit 10.2.0.0 255.255.0.0
access-list SSL_SPLIT standard permit 10.3.0.0 255.255.0.0
access-list SSL_SPLIT standard permit 10.200.0.0 255.255.0.0
access-list SSL_SPLIT standard permit 10.4.0.0 255.255.0.0
access-list SSL_SPLIT standard permit 10.5.0.0 255.255.0.0
access-list SSL_SPLIT standard permit 10.6.0.0 255.255.0.0
access-list SSL_SPLIT standard permit 10.7.0.0 255.255.0.0
access-list SSL_SPLIT standard permit 172.22.22.0 255.255.255.0
access-list SSL_SPLIT remark Video
access-list SSL_SPLIT standard permit 192.168.0.0 255.255.0.0
access-list NONAT_SSL extended permit ip object-group local_net_group 172.20.20.0 255.255.255.0
access-list NONAT_SSL extended permit ip 10.200.0.0 255.255.0.0 192.168.9.0 255.255.255.0
access-list tom extended permit tcp host x.x.x.x any eq smtp
access-list tom extended permit tcp host 10.200.200.222 any eq smtp
access-list tom extended permit tcp any host x.x.x.x
access-list aaron extended permit tcp any any eq 2967
access-list capauth extended permit ip host 10.200.200.1 host 10.200.200.220
access-list capauth extended permit ip host 10.200.200.220 host 10.200.200.1
access-list DMZ extended permit icmp any any
access-list dmz_access_in extended permit tcp any eq 51024 any eq 3336
access-list dmz_access_in extended permit icmp any any
access-list dmz_access_in extended permit tcp any any eq ftp
access-list dmz_access_in extended permit tcp any any eq https
access-list dmz_access_in remark rad5110 port 162 out
access-list dmz_access_in extended permit udp any any eq snmptrap
access-list dmz_access_in remark port 23 out
access-list dmz_access_in extended permit tcp any any eq telnet
access-list dmz_access_in remark port 53 dns out
access-list dmz_access_in extended permit object-group TCPUDP any any eq domain
access-list dmz_access_in extended permit object-group TCPUDP any any eq www
access-list dmz_access_in extended permit tcp any any eq h323
access-list dmz_access_in extended permit tcp any any object-group XML
access-list dmz_access_in extended permit udp any any object-group RAS
access-list dmz_access_in extended permit tcp any any range 1718 h323
access-list dmz_access_in extended permit tcp any any object-group H.245
access-list dmz_access_in extended permit object-group TCPUDP any any eq sip
access-list dmz_access_in extended permit udp any any object-group rtp_rtcp_udp
access-list dmz_access_in extended permit object-group TCPUDP any any object-group XML2
access-list dmz_access_in extended permit ip object-group local_net_group any
access-list dmz_access_in remark port 5061
access-list dmz_access_in extended permit tcp any any object-group tcp_tls
access-list outside_cryptomap extended permit ip 10.200.0.0 255.255.0.0 192.168.9.0 255.255.255.0
pager lines 24
logging enable
logging buffered warnings
logging trap informational
logging history informational
logging asdm warnings
logging host outside x.x.x.x
mtu outside 1500
mtu inside 1500
mtu dmz 1500
mtu Wireless 1500
mtu management 1500
ip local pool SSL_VPN_POOL 172.20.20.1-172.20.20.75 mask 255.255.255.0
ip verify reverse-path interface outside
no failover
icmp unreachable rate-limit 1 burst-size 1
asdm image disk0:/asdm-631.bin
no asdm history enable
arp timeout 14400
global (outside) 1 interface
nat (inside) 0 access-list NONAT_SSL
nat (inside) 1 0.0.0.0 0.0.0.0
static (inside,outside) x.x.x.12 10.200.200.15 netmask 255.255.255.255
static (inside,outside) x.x.x.15 10.5.0.11 netmask 255.255.255.255
static (inside,outside) x.x.x.13 10.200.200.240 netmask 255.255.255.255
static (inside,outside) x.x.x.16 10.200.200.222 netmask 255.255.255.255
static (inside,outside) x.x.x.14 10.200.200.155 netmask 255.255.255.255
static (inside,dmz) 10.200.200.0 10.200.200.0 netmask 255.255.255.0
static (inside,dmz) 10.4.0.0 10.4.0.0 netmask 255.255.0.0
static (dmz,outside) x.x.x.18 172.22.22.15 netmask 255.255.255.255
static (dmz,outside) x.x.x.19 172.22.22.16 netmask 255.255.255.255
static (inside,dmz) 10.3.0.0 10.3.0.0 netmask 255.255.0.0
static (inside,dmz) 10.2.0.0 10.2.0.0 netmask 255.255.0.0
static (inside,dmz) 10.1.0.0 10.1.0.0 netmask 255.255.0.0
static (inside,dmz) 10.6.0.0 10.6.0.0 netmask 255.255.0.0
static (inside,dmz) 10.7.0.0 10.7.0.0 netmask 255.255.0.0
static (inside,dmz) 10.5.0.0 10.5.0.0 netmask 255.255.0.0
access-group outside_policy in interface outside
access-group inside_policy in interface inside
access-group dmz_access_in in interface dmz
route outside 0.0.0.0 0.0.0.0 x.x.x.12 1
route inside 10.1.0.0 255.255.0.0 10.200.200.254 1
route inside 10.2.0.0 255.255.0.0 10.200.200.254 1
route inside 10.3.0.0 255.255.0.0 10.200.200.254 1
route inside 10.4.0.0 255.255.0.0 10.200.200.254 1
route inside 10.5.0.0 255.255.0.0 10.200.200.254 1
route inside 10.6.0.0 255.255.0.0 10.200.200.254 1
route inside 10.7.0.0 255.255.0.0 10.200.200.150 1
route inside x.x.x.0 255.255.255.0 10.200.200.2 1
route inside x.x.x.0 255.255.255.0 10.200.200.2 1
route inside 192.168.1.0 255.255.255.0 10.200.200.254 1
route inside 192.168.2.0 255.255.255.0 10.200.200.254 1
route inside 192.168.3.0 255.255.255.0 10.200.200.254 1
route inside 192.168.4.0 255.255.255.0 10.200.200.254 1
route inside 192.168.5.0 255.255.255.0 10.200.200.254 1
route inside 192.168.6.0 255.255.255.0 10.200.200.254 1
route inside 192.168.7.0 255.255.255.0 10.200.200.254 1
route inside 192.168.200.0 255.255.255.0 10.200.200.254 1
route inside 192.168.201.0 255.255.255.0 10.200.200.254 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 2:00:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
dynamic-access-policy-record DfltAccessPolicy
aaa-server COMPANY-NT-AUTH protocol nt
aaa-server COMPANY-NT-AUTH (inside) host 10.200.200.220
nt-auth-domain-controller DC
aaa authentication ssh console LOCAL
aaa authorization command LOCAL
http server enable
http 10.200.200.0 255.255.255.0 inside
http 10.200.0.0 255.255.0.0 inside
http 10.3.0.0 255.255.0.0 inside
no snmp-server location
no snmp-server contact
snmp-server community *****
snmp-server enable traps snmp authentication linkup linkdown coldstart
crypto ipsec transform-set AES256-SHA esp-aes-256 esp-sha-hmac
crypto ipsec transform-set asa2transform esp-3des esp-sha-hmac
crypto ipsec transform-set 3DES-SHA esp-3des esp-sha-hmac
crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
crypto ipsec security-association lifetime seconds 28800
crypto ipsec security-association lifetime kilobytes 4608000
crypto dynamic-map outside_dyn_map 20 set transform-set 3DES-SHA
crypto dynamic-map outside_dyn_map 20 set security-association lifetime seconds 28800
crypto dynamic-map outside_dyn_map 20 set security-association lifetime kilobytes 4608000
crypto map OUTSIDE_MAP 5 match address outside_cryptomap
crypto map OUTSIDE_MAP 5 set pfs
crypto map OUTSIDE_MAP 5 set peer x.x.x.53
crypto map OUTSIDE_MAP 5 set transform-set 3DES-SHA
crypto map OUTSIDE_MAP 5 set security-association lifetime seconds 28800
crypto map OUTSIDE_MAP 10 match address OUTSIDECO_VPN
crypto map OUTSIDE_MAP 10 set peer x.x.x.25
crypto map OUTSIDE_MAP 10 set transform-set AES256-SHA
crypto map OUTSIDE_MAP 10 set security-association lifetime seconds 28800
crypto map OUTSIDE_MAP 10 set security-association lifetime kilobytes 4608000
crypto map OUTSIDE_MAP 65535 ipsec-isakmp dynamic outside_dyn_map
crypto map OUTSIDE_MAP interface outside
crypto isakmp identity address
crypto isakmp enable outside
crypto isakmp policy 5
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 28800
crypto isakmp policy 10
authentication pre-share
encryption des
hash sha
group 2
lifetime 86400
telnet timeout 5
ssh 0.0.0.0 0.0.0.0 outside
ssh 0.0.0.0 0.0.0.0 inside
ssh timeout 20
console timeout 0
dhcpd dns 10.200.200.220 10.200.200.225
dhcpd wins 10.200.200.220 10.200.200.225
dhcpd lease 18000
dhcpd domain company.com
dhcpd dns 10.200.200.220 10.200.200.225 interface Wireless
dhcpd wins 10.200.200.220 10.200.200.225 interface Wireless
dhcpd lease 18000 interface Wireless
dhcpd domain company.com interface Wireless
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
ntp server 192.5.41.40 source outside prefer
ssl trust-point vpn.company.com outside
webvpn
enable outside
anyconnect-essentials
svc image disk0:/anyconnect-win-2.5.0217-k9.pkg 1
svc image disk0:/anyconnect-macosx-i386-2.5.2017-k9.pkg 2
svc enable
tunnel-group-list enable
group-policy SSL_Client_Policy internal
group-policy SSL_Client_Policy attributes
wins-server value 10.200.200.220
dns-server value 10.200.200.220
vpn-tunnel-protocol IPSec svc webvpn
split-tunnel-policy tunnelspecified
split-tunnel-network-list value SSL_SPLIT
default-domain value company.com
webvpn
sso-server none
auto-signon allow uri * auth-type all
group-policy no-split-test internal
group-policy no-split-test attributes
banner value Welcome to company and Associates
banner value Welcome to company and Associates
dns-server value 10.200.200.220
vpn-tunnel-protocol IPSec
ipsec-udp enable
split-tunnel-policy tunnelall
default-domain value company.com
group-policy DfltGrpPolicy attributes
dns-server value 10.200.200.220
default-domain value company.com
group-policy company internal
group-policy company attributes
banner value Welcome to company and Associates
banner value Welcome to company and Associates
dns-server value 10.200.200.220
vpn-tunnel-protocol IPSec
ipsec-udp enable
split-tunnel-policy tunnelspecified
split-tunnel-network-list value SSL_SPLIT
default-domain value company.com
username ciscoadmin password xxxxxxxxxxx encrypted privilege 15
tunnel-group DefaultWEBVPNGroup general-attributes
address-pool SSL_VPN_POOL
authentication-server-group COMPANY-NT-AUTH
default-group-policy SSL_Client_Policy
tunnel-group DefaultWEBVPNGroup webvpn-attributes
group-alias company_SSL_VPN enable
tunnel-group company_group type remote-access
tunnel-group company_group general-attributes
address-pool SSL_VPN_POOL
authentication-server-group COMPANY-NT-AUTH LOCAL
default-group-policy company
tunnel-group company_group ipsec-attributes
pre-shared-key *****
tunnel-group x.x.x.53 type ipsec-l2l
tunnel-group x.x.x.53 ipsec-attributes
pre-shared-key *****
class-map inspection_default
match default-inspection-traffic
policy-map global_policy
class inspection_default
inspect tftp
inspect esmtp
inspect ftp
inspect icmp
inspect ip-options
inspect netbios
inspect rsh
inspect skinny
inspect sqlnet
inspect sunrpc
inspect xdmcp
inspect mgcp
inspect h323 h225
inspect h323 ras
inspect sip
service-policy global_policy global
privilege cmd level 5 mode exec command ping
privilege cmd level 6 mode exec command write
privilege show level 5 mode exec command running-config
privilege show level 5 mode exec command version
privilege show level 5 mode exec command conn
privilege show level 5 mode exec command memory
privilege show level 5 mode exec command cpu
privilege show level 5 mode exec command xlate
privilege show level 5 mode exec command traffic
privilege show level 5 mode exec command interface
privilege show level 5 mode exec command clock
privilege show level 5 mode exec command ip
privilege show level 5 mode exec command failover
privilege show level 5 mode exec command arp
privilege show level 5 mode exec command route
privilege show level 5 mode exec command blocks
prompt hostname context
call-home
profile CiscoTAC-1
no active
destination address http https://tools.cisco.com/its/service/oddce/services/DDCEService
destination address email [email protected]
destination transport-method http
subscribe-to-alert-group diagnostic
subscribe-to-alert-group environment
subscribe-to-alert-group inventory periodic monthly
subscribe-to-alert-group configuration periodic monthly
subscribe-to-alert-group telemetry periodic daily
Cryptochecksum:a0689b4c837c79a51e7a0cfed591dec9
: end
COMPANY-asa#Hi Sian,
Yes on their end the PFS is enabled for DH Group 2.
Here is the information that you requested:
company-asa# sh crypto isakmp sa
Active SA: 3
Rekey SA: 0 (A tunnel will report 1 Active and 1 Rekey SA during rekey)
Total IKE SA: 3
1 IKE Peer: x.x.x.87
Type : user Role : responder
Rekey : no State : AM_ACTIVE
2 IKE Peer: x.x.x.53
Type : L2L Role : initiator
Rekey : no State : MM_ACTIVE
3 IKE Peer: x.x.x.25
Type : user Role : initiator
Rekey : no State : MM_WAIT_MSG4
company-asa# sh crypto ipsec sa
interface: outside
Crypto map tag: OUTSIDE_MAP, seq num: 5, local addr: x.x.x.13
access-list outside_cryptomap extended permit ip 10.200.0.0 255.255.0.0 192.168.9.0 255.255.255.0
local ident (addr/mask/prot/port): (10.200.0.0/255.255.0.0/0/0)
remote ident (addr/mask/prot/port): (192.168.9.0/255.255.255.0/0/0)
current_peer: x.x.x.53
#pkts encaps: 0, #pkts encrypt: 0, #pkts digest: 0
#pkts decaps: 10744, #pkts decrypt: 10744, #pkts verify: 10744
#pkts compressed: 0, #pkts decompressed: 0
#pkts not compressed: 0, #pkts comp failed: 0, #pkts decomp failed: 0
#pre-frag successes: 0, #pre-frag failures: 0, #fragments created: 0
#PMTUs sent: 0, #PMTUs rcvd: 0, #decapsulated frgs needing reassembly: 0
#send errors: 0, #recv errors: 0
local crypto endpt.: x.x.x.13, remote crypto endpt.: x.x.x.53
path mtu 1500, ipsec overhead 58, media mtu 1500
current outbound spi: 500EC8BF
current inbound spi : 8DAE3436
inbound esp sas:
spi: 0x8DAE3436 (2377004086)
transform: esp-3des esp-sha-hmac no compression
in use settings ={L2L, Tunnel, PFS Group 2, }
slot: 0, conn_id: 32768, crypto-map: OUTSIDE_MAP
sa timing: remaining key lifetime (kB/sec): (3914946/24388)
IV size: 8 bytes
replay detection support: Y
Anti replay bitmap:
0xFFFFFFFF 0xFFFFFFFF
outbound esp sas:
spi: 0x500EC8BF (1343146175)
transform: esp-3des esp-sha-hmac no compression
in use settings ={L2L, Tunnel, PFS Group 2, }
slot: 0, conn_id: 32768, crypto-map: OUTSIDE_MAP
sa timing: remaining key lifetime (kB/sec): (3915000/24388)
IV size: 8 bytes
replay detection support: Y
Anti replay bitmap:
0x00000000 0x00000001
Crypto map tag: outside_dyn_map, seq num: 20, local addr: x.x.x.13
local ident (addr/mask/prot/port): (0.0.0.0/0.0.0.0/0/0)
remote ident (addr/mask/prot/port): (172.20.20.8/255.255.255.255/0/0)
current_peer: x.x.x.87, username: ewebb
dynamic allocated peer ip: 172.20.20.8
#pkts encaps: 16434, #pkts encrypt: 16464, #pkts digest: 16464
#pkts decaps: 19889, #pkts decrypt: 19889, #pkts verify: 19889
#pkts compressed: 0, #pkts decompressed: 0
#pkts not compressed: 16434, #pkts comp failed: 0, #pkts decomp failed: 0
#pre-frag successes: 30, #pre-frag failures: 0, #fragments created: 60
#PMTUs sent: 0, #PMTUs rcvd: 0, #decapsulated frgs needing reassembly: 60
#send errors: 0, #recv errors: 0
local crypto endpt.: x.x.x.13/4500, remote crypto endpt.: x.x.x.87/2252
path mtu 1500, ipsec overhead 66, media mtu 1500
current outbound spi: 2D712C9F
current inbound spi : 0EDB79C8
inbound esp sas:
spi: 0x0EDB79C8 (249264584)
transform: esp-3des esp-sha-hmac no compression
in use settings ={RA, Tunnel, NAT-T-Encaps, }
slot: 0, conn_id: 65536, crypto-map: outside_dyn_map
sa timing: remaining key lifetime (sec): 18262
IV size: 8 bytes
replay detection support: Y
Anti replay bitmap:
0xFFFFFFFF 0xFFFFFFFF
outbound esp sas:
spi: 0x2D712C9F (762391711)
transform: esp-3des esp-sha-hmac no compression
in use settings ={RA, Tunnel, NAT-T-Encaps, }
slot: 0, conn_id: 65536, crypto-map: outside_dyn_map
sa timing: remaining key lifetime (sec): 18261
IV size: 8 bytes
replay detection support: Y
Anti replay bitmap:
0x00000000 0x00000001 -
How to recover IDS using CD recovery. and/or password recovery
I'm getting the following error message:
"No Hard drives has been found. You probably need to manually choose device drivers for the installation to succeed. Would you like to select drivers now?"
IDS cd os 4.1(1)
Choosing yes doesnt lead to selecting drivers and I'm not sure how to install them. Choosing no doesn't help either.
Also I'm trying to use this recovery CD on other unit that is password protected and I lost the password for it. i can't even boot from the CD. It boots immediately from the HD and it wont let me go for the CMOS setup to change boot order.
OrenOkay...first things first. The IDS-4210 does have a power button. If the bezel is installed, there is a silver button on the front that controls power. If the bezel is removed, you will need to push on the plastic circuit cover where the power symbol is located. The symbol looks like a circle with a vertical line at the top. Press directly on that symbol. Typically the sensor will boot back up if you remove power the way you described if it was running at the time. This is because the power settings in CMOS are setup to return to the last state (running, off) after a power failure. It's possible that messing with the jumper on the board resets this setting causing it to lose state, and thereby requiring you to manually press the power button to get the system to come back up. This should get us back to the HDD issue....
When you had the cover off, did you happen to check the power and IDE cables to the HDD? If not, try removing and reseating the connectors as a first step. You may also try moving the drive to the other bay and connecting it there (to rule out cable issues). This config should work, but it hasn't been tested. If you are still having problems, it is probably a HDD failure, and I would recommend RMAing the system. If you really want to make sure this is the problem before going through the hassle of an RMA, you can test the drive in a separate system (or swap with your second 4210). Just don't install two drives in the same 4210 at the same time.
On the second system, you indicated that it was not booting to the CD, but would boot directly to the HDD. This may still be an issue with your CD copy, because not all IDS-4210s will behave the same way, even with the same CD. We have witnessed this in the lab ourselves. My only guess is that some of the CD-ROM drives are more sensitive than others. I would try to verify BIOS settings on this system before blaming the CD though, unless you have another CD to test with.
Regarding breaking into CMOS, can you describe what you are seeing when the system boots? Are you connected through the serial port or with a keyboard and monitor? If you are connected through the serial port, you may not see anything if console redirection is not enabled in the BIOS. You will have to connect a keyboard and monitor to fix this. If you are on a monitor, you should see one of two things...either a Cisco splash screen, or standard text POST messages with a prompt to hit to run SETUP. Hit while either of these is displayed, and it should enter CMOS setup once the initial cpu and memory tests are completed.
Let me know if you are still having problems after trying these suggestions. You can contact me directly if you want ([email protected]).
-Rusty -
I am running version asa922.8-k8.I have tried via CLI to setup my rules and my access rules are not showing up in ASDM. Here are the rules that I had entered;
firewall>enable
firewall#configure terminal
firewall(config)#object network xbox
firewall(config-network-object)#host 192.168.1.100
firewall(config-network-object)#exit
firewall(config)#
firewall(config)#object network xbox-nat-tcp3074
firewall(config-network-object)#host 192.168.1.100
firewall(config-network-object)#exit
firewall(config)#object network xbox-nat-udp3074
firewall(config-network-object)#host 192.168.1.100
firewall(config-network-object)#exit
firewall(config)#object network xbox-nat-udp88
firewall(config-network-object)#host 192.168.1.100
firewall(config-network-object)#exit
firewall(config)#
firewall(config)#object network xbox-nat-tcp3074
firewall(config-network-object)#host 192.168.1.100
firewall(config-network-object)#exit
firewall(config)#object network xbox-nat-udp3074
firewall(config-network-object)#host 192.168.1.100
firewall(config-network-object)#exit
firewall(config)#object network xbox-nat-udp88
firewall(config-network-object)#host 192.168.1.100
firewall(config-network-object)#exit
firewall(config)#
firewall(config)#object-group service xbox-live-3074 tcp-udp
firewall(config-service-object-group)#port-object eq 3074
firewall(config-service-object-group)#exit
firewall(config)#object service xbox-live-88
firewall(config-service-object)#service udp destination eq 88
firewall(config-service-object)#exit
firewall(config)#
firewall(config)#object network xbox-nat-tcp3074
firewall(config-network-object)#nat (inside,outside) static interface service tcp 3074 3074
firewall(config-network-object)#exit
firewall(config)#object network xbox-nat-udp3074
firewall(config-network-object)#nat (inside,outside) static interface service udp 3074 3074
firewall(config-network-object)#exit
firewall(config)#object network xbox-nat-udp88
firewall(config-network-object)#nat (inside,outside) static interface service udp 88 88
firewall(config-network-object)#exit
firewall(config)#
firewall(config)#access-list outside_access_in line 1 extended permit tcp any object xbox object-group xbox-live-3074
firewall(config)#access-list outside_access_in line 2 extended permit udp any object xbox object-group xbox-live-3074
firewall(config)#access-list outside_access_in line 3 extended permit object xbox-live-88 any object xbox
how do i do the access list via ASDM? Running the latest version of asdm.The question is: What doesn't show up?
If you only configured the lines above, then the ACL is not yet applied to an interface. It won't show up under "Access-Control", but it should show up under "ACL Manager". Same for the objects. They also should be visible in ASDM.
If thats the case, then just apply the ACL to the interface:
access-list outside_access_in in interface outside
Maybe you are looking for
-
New MacBook: No Apple Remote Included?
Looking at the "What's In The Box" contents for the new MacBooks (Penryn), the Apple Remote is no longer included in the contents. Further, the $19 Apple Remote now shows up as an option in the Configure To Order listing. Hopefully, this is a mistake
-
Firefox 5 stops responding after I use it for awhile. Once I close it through the task manager, it refuses to reopen and I am forced to restart my computer to get Firefox to work again. Note: This problem also occurred in Firefox 3 before I updated.
-
Open PDF not auto included when combining files in Acrobat X
If I have a PDF open in Acrobat X and I click Create -> Combine files into a single PDF, the PDF that is open is not automatically included in the list of files to combine in the Combine Files window. I need to click the Add Files drop-down and then
-
Hey all, I'm displaying an image in a JPanel and I want the user to be able to resize the panel by dragging with the mouse as you would say in Photoshop. Obviously the image should resize to fill the panel as it's enlarged (showing resizing handles o
-
Windows 8.1 breaks i-Cloud for Outlook - How to fix it
I updated my computer to Windows 8.1 last night. This morning, I found that Outlook could no longer read the i-Cloud calendar and contacts. My system is running Office 2010 64 bit with Windows 8 professional upgraded to 8.1. Here's the fix: 1) Log ou