How to suppress blank page and selection criteria in SPOOL ?

My Z program submits two programs to spool and converts the ABAP List in the spool to PDF and emails.
After upgrade to ECC6, the first (a report painter report) resulting PDF there was one blank page and the contents were displayed on second page. For the second report (RKPEP003 - CJI3)  the selection criteria that the report used was printed as the first page of output and the result on a subsequent page. The same thing happens when I individually execute these two reports directly in SE38 with the same selection criteria. I believe the blank page is there in the spool because when I view the spool as a RAW, there is a P in the first column, however the spool shows that there is only one page in the first and two in the second (this is true - one for selection criteria "which I don't want" and then the actual content). In 46C, when I look at the RAW view of the spool there is no additional P's in the first column.
I do not want to have the blank page on the first report and the selection criteria listed on the output of the report. How can I do that ? I am thinking get_print_parameters can in someway get me there, but I am not sure.
Thanks
Hari
Edited by: Hari Sudarsanan on Apr 8, 2009 7:28 PM
Edited by: Hari Sudarsanan on Apr 8, 2009 8:05 PM

The first report painter program writes a regular ABAP list.
The second outputs an ALV.

Similar Messages

  • How to suppress blank pages in 11i from printer output

    Hi All,
    We were working on Oracle Reports and registering in 11i thr concurrent program and while running thr concurrent request we are getting blank pages from printer output, please let me know how to suppress blank pages as i need to get printouts without any white pages.
    Say for example if we run concurrent request and o/p is 10 pages which consists of 3 blank pages so finally we need to get printer o/p with 7 pages which are having data as i need to stop printing which are having white pages.
    Please help as this a critical scenario.....
    Regards,

    Please post the details of the application release, database version and OS.
    We were working on Oracle Reports and registering in 11i thr concurrent program and while running thr concurrent request we are getting blank pages from printer output, please let me know how to suppress blank pages as i need to get printouts without any white pages.
    Say for example if we run concurrent request and o/p is 10 pages which consists of 3 blank pages so finally we need to get printer o/p with 7 pages which are having data as i need to stop printing which are having white pages.
    Please help as this a critical scenario.....Does this happen to all concurrent requests?
    Is the issue with all printers or specific ones only?
    What if you use the lp command from the OS to print the concurrent requests output files, do you still get blank pages?
    Do you use PASTA?
    Please see these docs/links.
    How To Investigate Printing Issues and Work Towards its Resolution? [ID 297522.1]
    Oracle Applications Postscript Printing [ID 99495.1]
    Only First Line Of Concurent Output Prints And Then Blank Lines/Pages [ID 452906.1]
    Apps Reports Generate and/or Print With Incorrect Page Break Points [ID 359716.1]
    https://forums.oracle.com/forums/search.jspa?threadID=&q=Blank+AND+Page+AND+Print&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
    https://forums.oracle.com/forums/search.jspa?threadID=&q=Blank+AND+Page&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
    Thanks,
    Hussein

  • How to suppress blank page in sapscript

    Hi All,
    I am working on cheque printing, after I run the transaction F110, it will print the sap script which I have developed, everything is working fine and good. But its printing an extra blank page in addition with cheque. I have tested thinking it might be main window extention, but its not, even i have tested by keeping page number variable in main window, its not at all getting extented to the next page. I am wondering from where this blank is getting created, anybody can help me in this?
    Thanks in advance
    Kasturi

    Hi Sridy,
    Please debug the SAP script and check where exactly the value of &page& variable changes before triggering  your Blank page and remove that unwanted piece of code.
    Also check for contents of variable in debug mode.
    Regards,

  • How to suppress blank page before side-by-side subreports

    Post Author: nv6525
    CA Forum: General
    I'm having a problem with a primary report forcing a page-break before sub-reports display data.Here's the side-by-side (newspaper-column style) report I'm trying to build:   Report Header      Report title   Page Header        Suppressed   Details                 Suppressed   Report Footer       Subreport 1     Subreport 2     Subreport3     Subreport4     Subreport5   Page Footer         Footer with page numbersThe primary report is intended to be a shell for the subreports.  The subreports contain unrelated, unlinked, independent data from separate data sources.  Each subreport, which must be in-place (not on-demand), contains 2 or 3 columns of data.  The result set yields about 250 pages of data, which is OK.  I'm using Crystal Reports 10 on Windows XP.The problem is that the primary report is forcing a page break before the subreports begin displaying data.  I'd like the data to appear directly below the report header on page 1.  The Underlay option is checked on all sections of the primary report.  Can the page-break be removed?Thanks!

    Post Author: nv6525
    CA Forum: General
    I was able to find a solution.  It was in section C of KB article c2010715 for CR 8.5.  Basically, right-click a subreport in Design view, select Format Subreport, and on the Common tab uncheck "Keep Object Together."  This works great to begin displaying the subreports' contents on page 1 directly underneath the report heading.

  • On a website clicking on highlighted text in blue, the browser should take you to info on that subject. My Firefox opens a blank page and says "search history and bookmarks." How can I make it go to the info highlighted in blue text? Ver 3.6.15

    Usually the browser will take the user to info pages when a click on blue text is done. My browser just opens a blank page and has "search history and bookmarks and then just sits there. I can change that so it will do nothing and the message is "type a web address". It used to work fine. How can I fix this.

    Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
    * Don't make any changes on the Safe mode start window.
    See:
    * [[Troubleshooting extensions and themes]]

  • HOW TO ELIMINATE BLANK PAGES IN REPORTS?

    Sep 11, 2002 13:07 PT
    I'am having troubles with reports, i have design a report that has 2 sql, so there are 2 layouts in the report, the first one has many columns so I put it in 2 pages wide but the second sql is only four columns, so it is in just 1 page wide, my problem is when the report is printed the first pages are printed but when the data from the second sql begins i have one page printed then one left blank, the check box that indicates blank pages is uncheked, but the blank pages still remain printed, if anybody has the solution please let me know
    tnx
    pd. I'm working with report builder 6.0.8.12.1

    Use the commandline parameter BLANKPAGES=NO. This will suppress blank pages when you generate to file and print.
    -Siva B

  • When I open safari, I get a blank page and the beach ball.

    When I open safari, I get a blank page and the beach ball. If I try to go to a website, it will load up to a certain point sometimes—the .com of www.facebook.com for instance—but other times, nothing at all.
    I've fixed this once before by deleting some files in the library folder—extensions & preferences I believe—and choosing not to have plug-ins selected, then restarting the whole computer—rather than just safari. It will work fine for a day, or maybe 3 at the most, before I have to repeat the process all over again. I'm sure it's because I usually put plug-ins back on once I get it to work, because you can't really use the internet without using plug-ins. But I'm using Chrome right now, as I do when I'm too lazy or too in a rush to try the whole process of getting safari to work again, and I don't have a single issue with it.
    My question is really, what plug-in could cause this to happen repeatedly? It's not like I'm going to websites that may have malware on them. I spend most of my day going to some of the most visited websites on the internet. 
    Is there a known bug out there, because Java has been overrunning concurrently with this happening. It's CPU % runs around 100. I quit the process, but it doesn't change anything. So, other than the fan turning on, I have not had any popup telling me that safari has crashed, that I'm not connected to the internet, or that something went horribly, horribly wrong. I'm pretty sure Safari things it's running fine, but it's not.
    Thanks in advance.

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions — they’re easy to carry out and won’t change anything on your Mac.
    These steps are to be taken while booted in “normal” mode, not in safe mode. If you’re now running in safe mode, reboot as usual before continuing.
    Below are instructions to enter some UNIX shell commands. The commands are harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of the procedure suggested here, search this site for other discussions in which it’s been followed without any report of ill effects.
    Some of the commands will line-wrap or scroll in your browser, but each one is really just a single line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then either copy or drag it. The headings “Step 1” and so on are not part of the commands.
    Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
    Launch the Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the page that opens.
    When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign.
    Step 1
    Copy or drag — do not type — the line below into the Terminal window, then press return:
    kextstat -kl | awk '!/com\.apple/{printf "%s %s\n", $6, $7}'
    Post the lines of output (if any) that appear below what you just entered (the text, please, not a screenshot.) You can omit the final line ending in “$”.
    Step 2
    Repeat with this line:
    sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix)|edu\.mit|org\.(amavis|apache|cups|isc|ntp|postfix|x)/{print $3}'
    This time, you'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. You don't need to post the warning.
    Note: If you don’t have a login password, you’ll need to set one before taking this step. If that’s not possible, skip to the next step.
    Step 3
    launchctl list | sed 1d | awk '!/0x|com\.apple|edu\.mit|org\.(x|openbsd)/{print $3}'
    Step 4
    ls -1A /e*/mach* {,/}L*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta}* L*/Fonts 2> /dev/null
    Important: If you formerly synchronized with a MobileMe account, your me.com email address may appear in the output of the above command. If so, anonymize it before posting.
    Step 5
    osascript -e 'tell application "System Events" to get name of every login item' 2> /dev/null
    Remember, steps 1-5 are all drag-and-drop or copy-and-paste, whichever you prefer — no typing, except your password. Also remember to post the output.
    You can then quit Terminal.

  • How to add blank page to existing Document In Adobe Dc

    how to add blank page to existing Document In Adobe Dc Pro

    Hi thashrifs16749461,
    You can add a blank page using Adobe Acrobat DC by following the below instructions :-
    1) Open your existing pdf document in Acrobat DC.
    2) Choose the 'Organize Page' option form the Tools pane on the right as shown below in the screen shoot.
    3) Now at the top you will see all the tools to Organize the page, Click on 'Insert' & select 'Blank Page' from the drop-down to insert blank pages.
    *Shortcut : If you are using windows computer you can use ' Shift+Ctrl+T ' key to insert blank pages.
    In case if you experience any issue or have any query please let us know. We will be happy to help you.
    Regards,
    Aadesh

  • How to supress blank page in scripts?

    Hi gurus.
    can any one let me know how to supress blank page in scripts? When one of my condition satisfies it should print two pages and its working fine. When condition fails, it should print one page but its printing blank page as second page.
    Waiting for your answer.
    Urgent
    Regards,
    surya.

    hi,
    1. By providing the control commands in scripts,u can supress the blank pages.
    2.write the data between protect and end protect.
    3.Enclose the text that you want to prevent page-break in PROTECT... ENDPROTECT
    SAPscript will ensure that each line of this text is printed together on the same page.
    /: PROTECT
    Text
    Within
    The same page
    /: ENDPROTECT
    Regards,
    SHIVA(reward if helpful).

  • How to Avoid blank page in SAP Script

    I am working on a Script. My Script prints a check.
    This script is a copy of a std script.
    It has 3 pages - First Next Last
    My First page has all the required data.
    My second page is empty with out any values.
    I am getting the blank page as Page 2 when executing. How can we avoid it ?
    Senthil

    Hi Senthil,
    Please see the below points:
    1. Please check what have you defined as the NEXT PAGE for your first page. If so change it and make the first page itself as the next page.
    2. Check your main Window, may be there is blank line at the last of the main window, so check that abd remove that,so you won't get the blank page
    Please see the link which is similar to your problem:
    Re: How to remove blank page in sap script
    May it helps you.
    Regards.
    Deepak Sharma.

  • Why don't the options to not check if Firefox is the default browser, set the homepage to a blank page, and password settings hold?

    Why don't the options to not check if Firefox is the default browser, set the homepage to a blank page, and password settings hold? It opens to a firefox page and asks if I want to make firefox the default and has the checkbox checked to check for default with every launching.
    Just updated to Firefox ESR 24.6.0

    This article lists a number of possible reasons that Firefox might be unable to save your preference changes during your session, or that they might be overridden at startup: [[How to fix preferences that won't save]].
    Another common issue is a feature of security or utility software that protects you from unwanted browser settings changes by reverting them back to an earlier state. For example, Advanced SystemCare's Surfing Protection feature can do this. You may need to turn off such features, if you have them, in order to keep your changes.

  • How to print blank page in script

    Hi all,
    how to print blank page in script

    Hi,
    Try the command /: NEW-PAGE. Let me know if it is working.
    Ray

  • How to remove blank pages from report

    Hi All
    i have a condition where i have to display the record only when trxn lines are available for that record ,inside my for each group condition i put the if condition having a count variable so if count is not zero then only the record will be displayed ,it works but problem is it shows blank pages for those records.
    any clue would be very helpful.Thanks in advance
    Thanks
    Pratap

    Hi All
    The solution of this issue is given in below mentioned thread
    How to avoid blank page in BI Publisher
    Thanks a lot to Vestrini :)
    Thanks
    Pratap

  • I noticed when I restart Firefox 4, it opens my previous tabs even I set the option "Open a blank page" and it opens blank page when I have "Show my windows and tabs from last time". Please ignore my question if you're already aware of this issue. Thanks.

    I noticed when I restart Firefox 4, it opens my previous tabs even I set the option "Open a blank page" and it opens blank page when I have "Show my windows and tabs from last time". Please ignore my question if you're already aware of this issue. Thanks.

    Your previous tabs will not re-open or be available to re-open when starting Firefox if:
    *your previous session was in Private Browsing mode; see --> http://support.mozilla.org/en-US/kb/Private+Browsing
    *you use Clear Recent History (''Firefox button > History > Clear Recent History'' or ''Tools > Clear Recent History''); see --> https://support.mozilla.org/en-US/kb/Clear%20Recent%20History#w_how-do-i-clear-my-history
    *you clear History automatically when closing Firefox; see --> https://support.mozilla.org/en-US/kb/Clear%20Recent%20History#w_how-do-i-make-firefox-clear-my-history-automatically
    NOTE: Your third-party Plugins (Add-ons > Plugins) are not in the "Application Basics" (Troubleshooting Information) in the "More system details" of your original post. Third-party Plugins are categorized separately in "Installed Plugins" under "More system details". You should review but not change the Plugins as detected automatically by the software on this forum when posting a question.
    If you problem still exists after checking the above, the problem could be caused by one or more of your Extensions or Plugins:
    *See --> [http://support.mozilla.org/en-US/kb/Troubleshooting+extensions+and+themes Troubleshooting extensions and themes]
    *See --> [http://support.mozilla.org/en-US/kb/Troubleshooting+plugins Troubleshooting plugins]
    *See --> [http://support.mozilla.org/en-US/kb/Basic+Troubleshooting Basic Troubleshooting]
    '''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''

  • HT204053 how do i move page and numbers documents from one icloud login to another?

    how do i move page and numbers documents from one icloud login to another?
    I had to change my email address whcih meant new apple login.
    I have a number of docs in iwork/pages and iwork/numbers.  How do I transfer them to my new login?

    There's a couple of ways but my tip backing up your documents in the cloud is as good as any.

Maybe you are looking for