How to suppress compounded characteristic data in 7.0
Hi,
In 3.x I could choose a filter value for the compounded characteristics and the values would not display on the query. In 7.0 it doesn't seem to be the case anymore. Has SAP changed the way this works?
For example, in the BI Statistics, I am trying to display user name and the query displays System/User name compounded. I just want to display the user name. In my example, I restricted the values for system by our client (ABP100), however, on the query I still see client/username -- ABP100/FRED. I just want to see FRED.
Thank you,
Brian
Hi Brian,
Its very simple to achieve. Place your Compounded char (that you dont want to display ) just above the char (that u want to display) in row.
In the property of the main char set it to "No display" and "result suppress". then u will get the desired output.
For e.g char B is compounded with char A.
and output comes like A/B, whereas u want to only see B.
Put both A & B in row.
Place A above B and set A's display properties as suggested above, u will get the desired output.
Thanks
Dipika
Similar Messages
-
How to Hide Compounded Characteristic Infoobject Results in BEx Queries.
Hi All,
I searched for the solution but didn’t find any. Am new to BW and BEx query designing.
I have a compounded characteristic Info object Val1 which is compounded with Val2
Val1 has Text Table.
Val1 + Val2 gives unique Text values as mentioned below:
Eg:
Val1
Val2
Text (From Text table)
1
2
Abc
1
8
Xyz
1
In the BEx query I have to use Val1 as a Free Characteristic. So when there is no value for Val2 but has a value for Val1 (as shown in third row) it is displaying as 1/Not Assigned. Other Text are displaying as desired.
Am displaying Text as mentioned above in the report for this compounded Info objects. I want to display it as Not Assigned Instead of 1/Not Assigned or even blank. I tried all different ways of No Display etc. nothing is working.
Any help is much appreciated.
Cheers
SandeepHi,
Assuming as Val2 is primary info object and compound object is Val1.
Drag Val1 into rows, properties --> display as --> No display
Drag Val2 into rows, properties --> display as --> you can choose as you need, key or text.
Thanks -
Compounded characteristic are not displayed in the variable screen (BI 700)
Hi Experts,
How to display compounded characteristic in the variable screen of queriies?
Example :
IO 0PROFIT_CTR is compounded to 0CO_AREA. Tryimg to select 0PROFIT_CTR via a variable,
only values of 0PROFIT_CTR are displayed in F4 opo up, not those of 0CO_AREA.
0CO_AREA is not restricted in any way in query definiton.
This happens in BEx Analyser as well as in web apllication.
Did anybody face this issue? How to solve it?
Thanks in advance for helpful replies.
Regards
JoeHi,
Thanks for replies. Possibly I did't explain my problem i a correct way.
'I 've a variable for 0PROFIT_CTR. When I call F4 , values for 0PROFIT_CTR are displayed
e.g. as
7062 PC 7062
7062 PC /062
My problem is, that these PCs belong to different Co_areas. so i expected
3200 7062 PC 7062
4300 7062 PC 7062
3200 an 4300 are representing compounded Co_areas in this example. In 3.5 this worked perfectly,
if Co_areas was not restricted itself with a variable or a defined value.
Now I'm looking for the option to achieve this as well in 700.
Regards
Joe -
How to upload mass characteristic & class data.
Hi Team,
How to upload mass characteristic & class data. Is any BAPI or program available for this. LSMW is not working for this upload. Pls suggest.
ThanksHi,
Following are BAPI available-
1) BAPI_CLASS_CREATE Create Class BAPI
2) BAPI_CHARACT_CREATE BAPI for Characteristics u2013 Create
For more BAPI List go to link [http://www.sapbapi.com/bapi-list/|BAPI LIST]
You can use Ecatt for upload mass characteristic & class data. For Ecatt you go through this link [http://www.****************/Tutorials/eCATT/SAPGUIRecording/demo.htm|Ecatt Link]
Regards,
Ashish
Edited by: A. A. Vaidya on Aug 14, 2009 9:20 AM -
How to suppress "no valid rows of data" warning for composite Planning Form
I had an issue with using a 2-grid composite webform. I want to show Substitution Variables along with my primary grid. My secondary grid was created using Substitution Variables for rows, columns, and page dimensions. I am hiding all of the segments but not suppressing missing for rows or columns.
The problem is that I get the message "There are no valid rows of data for this data form" on the composite form due to my secondary grid (the Substitution Variable grid). Any tricks on how to suppress that? I even tried to add some data to an intersection, but, even with data, hiding the segments seems to bring on the warning message.
Thanks.That can be caused if suppress on columns is on. We usually ignore the column part
Even after all suppression is turned off and still getting the error, then yes it is could be because there is not data for that intersection.
Regards
Celvin -
Loading master data for characteristic having compounded characteristic
Hey guyzz
I am getting an error when i am trying to load master data for a custom characterisrtic ZQUALGRP (Quality Group) which has a compounded characteristic 0PLANT.
The data in the excel file used for loading looks like:
Plant | Quality Group | Description
1601 | BlendA | Willow Lake Underground | Blend A
1610 | BlendA | Riola Complex - Riola Portal | Blend A
1611 | BlendA Riola Complex - VG Portal | Blend A
I have defined transformations for Master Data Text Load and all these three fields are mapped in the transformation. There are no attributes for this characteristic.
I get the following error in the Data Transfer Process Monitor
ZQUALGRP: Data Record 1 ('1601BlendA E'): Version '1601BlendA' is not valid.
ZQUALGRP: Data Record 2 ('1610BlendA E'): Version '1610BlendA' is not valid.
ZQUALGRP: Data Record 3 ('1611BlendA E'): Version '1611BlendA' is not valid.
The transformation for some apparent reason is concatenating the plant and quality grp together.
Can you please comment why i am getting this error.
Please note I DELETED AND RECREATED DATA SOURCE AND TRANSFORMATION, STILL I GET THE SAME ERROR.
Thanks,
Ameya KulkarniA change..
The data in the file looks like this
Plant | QGrp | Description
1601 | BlendA | Willow Lake Underground Blend A
1610 | BlendA | Riola Complex - Riola Portal Blend A
1611 | BlendA | Riola Complex - VG Portal Blend A -
How to suppress business area feild in cost center master data urgent plzzz
how to suppress business area feild in cost center master data
Hi ,
Please check these notes
Note 606933 OKEON: Business area is no required entry field
Note 506308 OKEON: Business area financial statement prevents change
Note 422801 KS01 with template does not check business area
It might be possible to create a modification,.
Please assign points if it useful
Regards
Ravinagh Boni -
How to Suppress result rows for ALL Characteristic within BEX Analyzer
HI,
We Currently upgrade from BEX 3.5 to BEX 7.
In BEX 3.5 Analyzer there was an option by right clicking on a Characteristic and then going to "All Characteristic" and then "Suppress all Result Rows."
In BEX 7 Analyzer it seems that you can only suppress result rows one characteristic at a time. Is there a way in BEX 7 Analyzer to suppress ALL characteristic at once. The same as BEX 3.5.
Thanks!
Edited by: Raylene Tucker on Feb 8, 2010 12:07 PM
Edited by: Raylene Tucker on Feb 8, 2010 12:09 PMHi,
in 7x Analyzer, surpressing the results & Filtering is specific to characteristic. and this feature is more advanced and useful than the at a time surpress,
even i fyou go to the Query Properties, it will allow you to surpress by characteristic only instead of at a time.
Hopes it is clear
Regards
ReddY A -
Warning message about CMP problem when launching query - how to suppress?
Dear Experts
How can I suppress warning message that did not stop the query from running?
I encounter this message when 1st launching it. The next run , it does not show. But if user run it i think may still show. How to suppress it?
The message is :
=================
Characteristic [Z_I_NN_FN]Application Sub Grou of the MultiProvider is not provided by the PartProvider ZC_00N; this means it is not identified. However, [Z_I_NN_FN]Application Sub Grou is compounded to 0COMP_CODE and 0COMP_CODE is identified with characteristic Z_I_MM_FM for InfoProvider ZC_006.
In this case, there is a compounding or CMP problem with [Z_I_NN_FN]Application Sub Grou in the MultiProvider for PartProvider ZC_006.
Processing characteristics with CMP problems in the data manager is very complicated and can have a negative impact on performance. The data manager cannot use SIDs for these characteristics (at least not in the corresponding InfoProvider) because the initial SID = 0 for [Z_I_NN_FN]Application Sub Grou is not the same as the initial compound key for 0COMP_CODE [Z_I_NN_FN]Application Sub Grou (that is, when real values are posted in ZC_006 for 0COMP_CODE).
For this reason, hierarchies for [Z_I_NN_FN]Application Sub Grou must often be read at leaf level. Furthermore, it is not possible to use hierarchy aggregates for [Z_I_NN_FN]Application Sub Grou or for the remaining InfoProviders.
System Response
Where possible, the system tries to avoid negative impacts on performance. Unfortunately, such performance issues cannot be avoided if the correct results are to be displayed.
Procedure
When working with important MultiProviders, you should always avoid characteristics with CMP problems.
====================
Please advise how to address CMP problem error message when launching query.
regards
PascalHi Pascal,
Why dont you select those compounding objects in Multiprovider itself.As far as i understand while activating the MP it throws an error if compounding objects are not selected.
One more thing to add which i noticed you can try running the query on analyzer if you are running it on RSRT.
You can see the data even if MP is not active on analyzer but not on RSRT.
Hope it helps.
Regards,
AL -
Report on characteristic "date"
Hi all,
I need to report on characteristic "date" not only characteristic "period/year" in report painter in CO-PA costing based.
How can I do that?
Thanks for any help!
HuyenTTStill waiting for any idea for that issue!
-
How to Suppress Header and footer.
Hi,
I have master-Detail report. Report prints One master and all detail records on a page. If detail records are more than to fit on one page, report prints master gaian on next page followed by detail records. For a master record If there are no detail records, I supress the master record also using format trigger.
My problem is how to suppress the Header & Footer information that has to be printed on each page otherwise. When I suppress printing of master, All I get is Page header and footer. This happens only to the master records that fall in between. The pages related to last master records are not printed.
How can I suppress printing of header and footer on blank pages.
ThanksThanks Santa & Rohit,
As santa has suggested, I am already suppressing the printing of master record and its column headings based on the count of number of deatil records. If count of detail records = 0, I am suppressing master record.
The problem is with Report header (TITLE etc.) and footer. I have to print TITLE and FOOTER on each an very page. So I have put these into Margins. The Count of master records at the report level, can be used to suppress the master records column headings and also TITLE and FOOTER. So if there is no master records, report does not print anything and that is fine.
Problem comes when there are some master records with "No" detail records. Something like:
-M1
----D1
----D2
----Dn
-M2
----D1
----D2
----Dn
M3
M4
M5
----D1
----D2
----Dn
M6
M7
M8
My report now produces pages for M1, M2 and blank data area (with Title and Footer) for M3, M4 and the M5. It suppresses pages for M6, M7, M8 etc. So if a master record has no detail records, but happens to be the last records that suppresses the TITLE and footer also.
Any Ideas how to suppress TITLE/FOOTER for M3 & M4.
Thanks -
How to get the "current date" in the BEx?
Hi all,
I need to get the "current date" in my Bex report in order to make a comparison. I know there is a "How to" which shows how to get the current date via a User Exit, but I didn't find it. Could you please help me?
Thanks1. Create a New Formula in Key Figures structure
2. Give tech name and description and Select "New variable" option
3. Next screen will launch Variable Wizard -> create a new variable with replacement path as processing type
4. in next screene select the date characteristic that represents the first date to use in the calculation (From Date)
5. In the next screen select Key in the Replace Variable with field. Leave all the other options as they are
6. In the next Currencies and Units screen select Date as the Dimension ID.
6. Save variable
repeate the Above steps to create another variable (To Date)
and now you can use these two new replacement path variables in your new formula.
Dev -
How to change an characteristic to an navigation attribute?
Hello everyone!!
Does anybody knows how to change a characteristic that is on a POS to an attribute navigation of another characteristic that is in the same POS without deactivating it?
An infocube has the same POS characteristics. So, if I do this modification, the infocube will be automatically chaged? I think not, but I want to avoid manually changing almost everything.
Thanks in advance!!
RegardsHello Heidi
Sorry if I took so long to answer.
Unfortunately you will have do deactivate the POS and of course change all the infocubes, infosources, etc, that are involved with this change. If you deactivate your POS, all the CVC´s are eliminated, so it will be better if you backup all the data in your live cache in an backup infocube.
When you change the characteristic to an navigation attribute and also change the infocube, the data in the infocube will adjust automatically. You will have to create the CVC´s again with the new "format". But in the infocube, it won´t be necessary.
I hope it helps.
Best Regards
Angela -
Hi,
I am using
1. dbms_xmlgen.newContext to get the information from table.
2. After that I am using dbms_lob.createtemporary
3. Then I am using dbms_xmlgen.getXml
4. Finally I am using dbms_xmlgen.closecontext
I am using the above four steps to repatedly taking records from different tables.
My requirement is : Each and every time I am getting the <?xml version = '1.0'?>.
How to suppress <?xml version = '1.0'?> ?
Regards
SriniHi,
Use DBMS_XMLGEN.getXMLType to retrieve the XML data into an XMLType variable.
Then, with getClobVal method, you can convert it to CLOB :
SQL> DECLARE
2 v_xml XMLType;
3 v_lob CLOB;
4 BEGIN
5 v_xml := dbms_xmlgen.getXMLType('select * from scott.emp where rownum = 1');
6 v_lob := v_xml.getClobVal();
7
8 dbms_output.put_line(v_lob);
9 END;
10 /
<ROWSET>
<ROW>
<EMPNO>7369</EMPNO>
<ENAME>SMITH</ENAME>
<JOB>CLERK</JOB>
<MGR>7902</MGR>
<HIREDATE>17/12/80</HIREDATE>
<SAL>800</SAL>
<DEPTNO>20</DEPTNO>
</ROW>
</ROWSET>
PL/SQL procedure successfully completed -
How to show field Posting Date (FB60)
Hi All...
I have some problem with my SAP testing,
when i try to created some testing with AP Invoice transaction FB60 @ SandBox Client 200, i can found field Posting Date.
but when i try to create testing with FB60 @ SandBox Client 300, i can't found field Posting Date,
does any body can give me the solution, how to display field Posting Date @ my client 300 ??
Regards
FerryHi,
There must a screen varient activated for tcode FB60 in yuor 300 clent to suppress the PD field.
In standard system it will always shown.
Please check with your ABAPer for the screen varient activated to it or not.
Thanks,
Srinu
Maybe you are looking for
-
DECODE works in SQL but not in a CURSOR
I have simplified my problem to "DUAL": While in a SQL session : select decode( (select 1 from dual) ,(select 1 from dual) ,1 ,0) from dual; Expected result: 1; Actual result: 1; Place this code in a PL/SQL block : declare X number; begin SELECT deco
-
logging into creative cloud library in photoshop ????? looking all over for it, I'm logged in on the desktop app but it still dons show as logged in in photoshop. please help
-
Installing magic mouse on windows 7
I am trying to find a driver to install the magic mouse on my windows 7 laptop
-
Device to connect photo ipod to car stereo?
I am looking for a a good device to connect my ipod to my car stereo. I was using a cheap tape connector with wire on my old car but the new one only has a cd player. I bought a no-name fm transmitter (made in china?) with charging capability on ebay
-
Iso CD Sound Blaster Live 5.1
Help !!! i need cd iso to my own card creative sound blaster li've 5. digital model number SB0220 serial C6SB0229447004949Y, anyone have link to download iso cd, plz help to share, thx all guys