How to Suppress information message from Function module ?

Hello Every one ,
I have a problem when executing the function module in RF Tranasaction , I have a requirement to create a handling units through COPAWA transaction, i am using few function modules which is using by transactions , in that the function module it is giving an information message from FM COHU_EXBEREIT_LINE_CHECK, i need to use this function module becuase it will validate the entries . that is the reason i am using it
but I want to suppress the message .,
Any suggestions , please.
Thanks in Advance.
Nags

Add an Exception error_message while calling your function module in the program. It will suppress S, I, W messages
EXCEPTIONS
   CHECK_ERROR      = 1
   OTHERS           = 2
   ERROR_MESSAGE    = 3.                 " Add this line also

Similar Messages

How to Retrieve Messages from Function Module 'CM_F_MESSAGE'

I have a custom program that first calls function module CM_F_INITIALIZE to make sure that pop-ups are not displayed on screen. This program then performs a subroutine that also calls function CM_F_MESSAGE. How do I retrieve the messages so I can output it as 1 big list on screen?
Thanks in advance!

The subroutine calls the function CM_F_MESSAGE to display message.
you can declare one internal table in your program and populate the message details in this internal table.
At the end while displaying data, display the content of this internal table as messages populated during the process.

How to display success message in function module

Hi Experts,
I am developing new function module regarding URL finder. As per my requirement ,
If USER ID is not provided -display SUCCESS MESSAGE and Provide sy-uname.
how to display success message.if possible can You write the code.
Thanks
raju

Hello,
We can use an exporting parameter like single character field like 'S' for success and 'E' for error instead of a message.
Another option is you can use the Tables parameter and populate Return table with error or success message. Return table of type 'BAPIRET2'.
Hope this might help you!
Regards,
MM Jaffer.

How to download Temp tables from Function Module

Hi Gurus,
I have a function Module which is getting data from various DSOs and putting in another DSO.
For data validation purposes I need to download data which is in temp tables.
I know I need to go to SE37 and set breakpoint and then go to rsa3 and run the extractor/ FM in DEBUG mode. After that I have to execute the FM. I performed all these steps but still could not downlaod temp tables.
Anybody has any suggestions if I am missing any steps in here.
Regards

if you have a temp table - say itab - then you can have an open dataset command to dump the table into a flat file in your app server and then do the reconsiliation with that data. This is because extraction is done using a background job and you can only store the data as a flat file onto the app server.
The flat file can be generated using the open dataset command.

How to create webservice from function module

Hello,
I'm trying to create webservice from function module from. I choose Utilities/More Utilities/Create Webservice/..From function Module. What data should I enter in section "Enter Package/Request" ?
When I check "Local object" checkbox I get a message "Test objects cannot be created in foreign namespaces"
Is there any doc about this procedure (web service creation) with description of all sections ?
thanks for any reply,
Lukasz Ferenc

Hi,
Which SAP product of wich release of which SP are you using ?
The procedure is documented in help.sap.com and in blogs and SDN forum messages.
It means that the use of the SEARCH button should give plenty of answers...
>When I check "Local object" checkbox I get a message "Test objects cannot be created in foreign >namespaces"
As usual, begin your choosen name with an "Z".
Regards,
Olivier

How to create a generic datasource from function module?

Dear experts,
I have created a generic datasource from function module. For this extrator, I created a function module and a structure.
I have now some difficulties to continue:
In this function module, i get data from different transparent tables. Then i put these data into an internal table.
I just don't know what is the relatioin between the structure i defined and this internal table.
I should make "iTab structure AA" in the source code?
Thanks

Hi..
check this
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/84bf4d68-0601-0010-13b5-b062adbb3e33
Generic Extraction via Function Module
/people/siegfried.szameitat/blog/2005/09/29/generic-extraction-via-function-module
1. Create s structure with the fields that you need from the 4 tables . Activate.
2. Goto SE 80 Select The Function Group , Copy , Select the Function module
" RSAX_BIW_GET_DATA_SIMPLE " and Give a New name starting With
Y or Z .
3. SE37 ->Your Function module name -> Change , In table tab give your structure
name by deleting the associated type given in " XXXX " .
4. Now select source code and Do the coding . Give Data source name in Coding .
In your case you have to take data from more that 1 table .
5. Activate the Function Group .
6. In RSO2 Create the Data source , Give the Function Module Name , And Save.
7. RSA3 -> Give data source name and Check for the Records .
Creation of custom datasource. (Using function module)
.Create a function group .
. Structure ZTXXXX
Create function module (i.e. ZTESTXXX) .
. Create the data source using transaction (RSO2).
. If structure exists for the table parameter of your function module then ok else create a structure for the table parameter .
Test the datasource in R/3 using transaction RSA3.
Transfer the data source to BW System and replicate it in the BW-System.
Message was edited by:
shiv

How to find out the inbound function module in the extended idoc

Hi,
how to find out the inbound function module in the extended idocs
Thanks .

through we41/we42 you can find the inbound function module.......
or
thorough we19(idoc test tool) ....
give the input as message type or basic idoc..
press exec...
then you can find th button on application tool bar as inbound funtion module....
from here also you can find..........
<REMOVED BY MODERATOR>
Khasimsa
Edited by: Alvaro Tejada Galindo on Apr 14, 2008 1:34 PM

How to write the exceptions in function module

dear all,
how to write the exceptions in function modules with example.
thanq
jyothi

Hi,
Raising Exceptions
There are two ABAP statements for raising exceptions. They can only be used in function modules:
RAISE except.
und
MESSAGE.....RAISING except.
The effect of these statements depends on whether the calling program handles the exception or not. The calling program handles an exception If the name of the except exception or OTHERS is specified after the EXCEPTION option of the CALL FUNCTION statement.
If the calling program does not handle the exception
· The RAISEstatement terminates the program and switches to debugging mode.
· The MESSAGE..... RAISING statement displays the specified message. Processing is continued in relation to the message type.
If the calling program handles the exception, both statements return control to the program. No values are transferred. The MESSAGE..... RAISING statement does not display a message. Instead, it fills the system fields sy-msgid, sy-msgty, sy-msgno , and SY-MSGV1 to SY-MSGV4.
Source Code of READ_SPFLI_INTO_TABLE
The entire source code of READ_SPFLI_INTO_TABLE looks like this:
FUNCTION read_spfli_into_table.
""Local Interface:
*" IMPORTING
*" VALUE(ID) LIKE SPFLI-CARRID DEFAULT 'LH '
*" EXPORTING
*" VALUE(ITAB) TYPE SPFLI_TAB
*" EXCEPTIONS
*" NOT_FOUND
SELECT * FROM spfli INTO TABLE itab WHERE carrid = id.
IF sy-subrc NE 0.
MESSAGE e007(at) RAISING not_found.
ENDIF.
ENDFUNCTION.
The function module reads all of the data from the database table SPFLI where the key field CARRID is equal to the import parameter ID and places the entries that it finds into the internal table spfli_tab. If it cannot find any entries, the exception NOT_FOUND is triggered with MESSAGE ... RAISING. Otherwise, the table is passed to the caller as an exporting parameter.
Calling READ_SPFLI_INTO_TABLE
The following program calls the function module READ_SPFLI_INTO_TABLE:
REPORT demo_mod_tech_fb_read_spfli.
PARAMETERS carrier TYPE s_carr_id.
DATA: jtab TYPE spfli_tab,
wa LIKE LINE OF jtab.
CALL FUNCTION 'READ_SPFLI_INTO_TABLE'
EXPORTING
id = carrier
IMPORTING
itab = jtab
EXCEPTIONS
not_found = 1
OTHERS = 2.
CASE sy-subrc.
WHEN 1.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno.
WHEN 2.
MESSAGE e702(at).
ENDCASE.
LOOP AT jtab INTO wa.
WRITE: / wa-carrid, wa-connid, wa-cityfrom, wa-cityto.
ENDLOOP.
The actual parameters carrier and jtab have the same data types as their corresponding interface parameters in the function module. The exception NOT_FOUND is handled in the program. It displays the same message that the function module would have displayed had it handled the error.
Or
just have to decide what exceptions u want and under what conditions.
then declarethese exeptions under the exceptions tab.
in the source code of ur function module.
if
like this u can code .
now when u call the function module in tme mainprogram.
if some error occurs and u have declared a exception for this then it will set sy-subrc = value u give inthe call of this fm.
in the fm u can program these sy-subrc values and trigger the code for ur exception.
Please reward if useful
Regards,
Ravi
Edited by: Ravikanth Alapati on Mar 27, 2008 9:36 AM

How to transfer text messages from android to computer?

As you know, SMS is the basic function of a mobile phone, and we are used to send text messages on many occasions. Want to copy android sms to pc avoid losing them accidently? Puzzled in how to transfer text messages from android to pc? Well, now I'll guide you how to copy text messages from android phone to computer with Coolmuster Android Assistant.
It's very easy, we just need 2 steps to finish the work:
Step 1:Connect Android Phone to pc
The first thing you need to do is to download and install the Android contacts manager on your pc and launch it. The next is connect your Android phone to pc via usb cable. Your device will appear on the screen. The manager would recognise your android device automatically.
Notice: If this is the first time you connect android phone to the problem on computer, you should enbale USB debugging first, and install a USB driver on your computer, then the app would detect your android phone automatically.
Step 2elect sms and Start Export
You can find many icon on the left, find "Contacts" and click it, all then go to "SMS", then all sms on your android phone will be listed on the right. Then select and check you want to transfer, at last click "Export" to start the work.
That's all!

iOS: Transferring information from your current iPhone, iPad, or iPod touch to a new device

Urgent: Web Service from Function Module

Hi guys, I am new to this area so please help to achieve following:
I want to show a demo to load data from a web service to BI. I have performed the following steps and dont know how to process further. Please help me in the sense where do I put the logic to show fields on the web service and .
1. I have created a web service data source in BI with four fields (Cal dat, material, amount and currency)
2. This created a Web Service /RFC FM automatically.
3. From this FM I created a web service (Utilities create web service from function module)
4. I followed the web service creation wizard.
Thanks,
sam

releasing and related steps are fine,
what i want to know is, BW/BI datasource will create a FM, from this FM inturn I will create a webservice.
Lets say BW/BI datasource has 4 fields account, company, amount & currency.
I want to enter these 4 values from the webservice which will bring these values to BW delta queue and eventually get loaded in BW.
For this process do I need to code anything in the FM or any other part of the system

How to Create a Remotely Enabled Function Module

Hi All,
How to Create a Remotely Enabled Function Module.
I Want to Create a FM Using Sample Data , This for Practice
What Fields can i give in the Import and Export Parameters.
Please Give me one Example
Can Any one Give me the Steps to do this.
Regards
Vamsi

Hi Vamsi,
Lets do simple example where you will first create a RFC in one server (say A) and create normal program in othere server (say B). Finally you will call the RFC in A from B.
Do the following steps for creating RFC in server A.
1. log on to server A
2. go to se37
3. Edit -> function groups-> create function group and give the function group name (say ZGRP).
4. create a FM ( say Z_TEST_RFC) in se37 providing the function group which is created just now.
5. go to attribute tab -> choose remote-enabled module from processing type.
so that your FM will become RFC.
6. provide the import parameter in import tab.
we will provide only two import parameters.
- parameter name : P_NUM1, typing: TYPE, associated type : I & check the pass value (all the parameters of RFC must pass by value).
- parameter name : P_NUM2, typing: TYPE, associated type : I & check the pass value
7. provide the export parameter in export tab.
parameter name : P_SUM, typing: TYPE, associated type : I & check the pass value
8. write the given simple code in source code tab.
FUNCTION Z_TEST_RFC.
P_TOT = P_NUM1 + P_NUM2.
ENDFUNCTION.
Do the following steps for creating ABAP program which will call the RFC in server B.
1. se38 - > creat a program.
2. write the given simple code.
data tot type i.
call function 'Z_TEST_RFC' destination 'XXXXXX'
exporting
 p_num1 = 10
 p_num2 = 15
importing
 p_tot = tot.
write tot.
please note that XXXXXX is RFC connection which is avialable in sm59 transaction in server A.
-go to sm59 - > abap connection (list of RFC connection configurations are avialable). choose server B connection and replace it of XXXXXX in the code.
finally you can execute the normal abap program that will call the RFC and display the result.
Regards,
Sukhee

How to call a remote capable function module?

Hi all,
I want to call a bapi from a R/3 that is not available in the current system were i have my WebDynpro Abap application.
So, i called the wizard "Service Call".
In the Select Service step i have to input the destination and Function Module and
Before i specified an RFC destination .
The wizard cannot find the function.
I read the Note:
The function module must exist in the current system! The wizard does not support to call a remote capable function module that does not exist in the current system.
The question is :
How can i call remote capable function module?
Thanks,
Ari

Hi,
this link might help you : <a href="http://help.sap.com/saphelp_erp2005vp/helpdata/en/22/0424ba488911d189490000e829fbbd/frameset.htm">rfc in abap</a>
grtz
Koen

How to extract data by using function module in generic extraction please

how to extract data by using function module in generic extraction please give me steps required

Dear Deba,
Generic Extraction via Function Module
/people/siegfried.szameitat/blog/2005/09/29/generic-extraction-via-function-module
If the requirement is like extracting data from multiple tables with some complex logic then views cannot be used..so u cna go for FM is used where it can be achieved.
Chk these
/people/siegfried.szameitat/blog/2005/09/29/generic-extraction-via-function-module
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a0f46157-e1c4-2910-27aa-e3f4a9c8df33
check the following thread
generic extraction with function module
Generic Extraction with function module
Regards,
Ram.

Can we change WSDL file created from Function Module wizard??

Hi everybody!
I have created a web service from function module using SAP wizard.
Now the consumer side want me to change <wsp:UsingPolicy wsdl:required="true"/>
Is this possible???
If so how?????
Thank u in advance!!

Hi Muhammad!
As soon as you open WSDL for selected binding in the URL are of you explorer change the ws_policy with "standard" . Then simply save the wsdl and send it to the other party.
Hope this helps!

How can I show message from server?

Has anyone idea, how can I show message from server? I want to show message after some files are uploaded via FTP.

Hi,
You can use OPEN DATASET for this purpose.
Try this code:
****************************************
Data:
A_FILE TYPE RLGRAP-FILENAME, "Application server
P_FILE TYPE RLGRAP-FILENAME. "Presentation server
DATA: BEGIN OF ITAB OCCURS 0,
LINE TYPE STRING,
END OF ITAB.
DATA: FILENAME TYPE STRING.
FILENAME = P_FILE.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
 FILENAME = FILENAME
TABLES
 DATA_TAB = ITAB[]
EXCEPTIONS
 FILE_OPEN_ERROR = 1
 FILE_READ_ERROR = 2
 NO_BATCH = 3
 GUI_REFUSE_FILETRANSFER = 4
 INVALID_TYPE = 5
 NO_AUTHORITY = 6
 UNKNOWN_ERROR = 7
 BAD_DATA_FORMAT = 8
 HEADER_NOT_ALLOWED = 9
 SEPARATOR_NOT_ALLOWED = 10
 HEADER_TOO_LONG = 11
 UNKNOWN_DP_ERROR = 12
 ACCESS_DENIED = 13
 DP_OUT_OF_MEMORY = 14
 DISK_FULL = 15
 DP_TIMEOUT = 16
 OTHERS = 17.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
OPEN DATASET A_FILE FOR OUTPUT IN TEXT MODE ENCODING DEFAULT.
LOOP AT ITAB.
TRANSFER ITAB-LINE TO A_FILE.
ENDLOOP.
*****************************************
Hope this helps,
Regards,
Pragya

How to Suppress information message from Function module ?

Similar Messages

Maybe you are looking for