How to Suppress result rows for ALL Characteristic within BEX Analyzer

HI,
We Currently upgrade from BEX 3.5 to BEX 7.
In BEX 3.5 Analyzer  there was an option by right clicking on a Characteristic and then going to "All Characteristic" and then "Suppress all  Result Rows."
In BEX 7 Analyzer it seems that you can only suppress result rows one characteristic at a time.  Is there a way in BEX 7 Analyzer  to suppress ALL characteristic at once.  The same as BEX 3.5.
Thanks!
Edited by: Raylene Tucker on Feb 8, 2010 12:07 PM
Edited by: Raylene Tucker on Feb 8, 2010 12:09 PM

Hi,
in 7x Analyzer,  surpressing the results & Filtering  is specific to characteristic. and this feature is more advanced and useful than the at a time surpress,
even i fyou go to the Query Properties, it will allow you to surpress by characteristic only instead of at a time.
Hopes it is clear
Regards
ReddY A

Similar Messages

  • How to suppress Result rows in a Query in Web Application Designer

    Hi
                 I am trying to post a query in Web Application Designer. I am able to run the query in WAD but the Results rows appear. I choose Suppress Result Rows always in All Characteristics option in the query in BEx Explorer but still i see result rows in the WAD. Can anyone please let me know how to suppress Result rows so that they dont appear in Web Application Designer.
    Thanks,
    Padma

    To get the enhanced menu-
    1. Open the template in WAD.
    2. Go to Web Item properties.
    3. Go to Entries in Context Menu.
    4. Find the "Enhanced Menu" property. Set it to "display" if you want it to be visible in template result.
    5. Next time when you execute your template you will be able to access it by right clicking.
    or
    If you just want to supress results without adding enhanced menu in the context menu, simply set "Calculate result as" to "No Display".

  • How to move result row for hierarchical character bellow corresponding rows

    Hi expert,
          in my query , I set a hierarchy for a character in row. but it result row is above rows, however I set all result row bellow corresponding rows in query property. also all other result rows display bellow corresponding rows. please tell me how to move result row for hierarchical character bellow corresponding rows.
    Many Thanks,

    Hi Yasinn,
    you are right and you can make it even shorter:
    LOOP AT ITAB.
      Collect ITAB Into ITAB2.
    EndLoop .
    It will work much faster using field-symbols:
    field-symbols:
      <itab> like line of itab.
    LOOP AT ITAB ASSIGNING <itab>.
      Collect <itab> Into ITAB2.
    EndLoop .
    BTW: Kishore Babu Gummadi's suggestion about the field catalog does not make any sense, not regarding your question and not regarding a field catalog derived from DDIC fields: What is the DDIC defined output length of ekbe-wrbtr?
    Regards,
    Clemens

  • How to change default for Suppress Results Rows

    Hi,
    Does any one know a way to change the default value for the "Suppress Results Rows" from "Never" to "Always" under characteristic properties in a BEX query?
    Every time we build a new query we have to go to each characteristic and change most of them to "Always". Want this to be a system wide change that would affect all new queries or existing queries that are being modified by adding new characteristics.
    Thanks,
    Mike

    Hi Mike,
    This property is controlled by domain RRXNOSUMS. You can change the default value to point from "Blank" to "U", I suppose. Haven't tried this though and I am not sure if it is okay to play around with the SAP settings. But if it works for you, do post back.
    Hope this helps...

  • How to set a customized search results template for all users

    Hi.
    I know the customized search results views are stored in a file called pne_portal.hda that resides on every user's subfolder in data/users/profiles/...
    Is there a way to set a customized search results template for all users? If it's impossible, is there a way to modify the Headline view? I'm not able to find the resource or template where this view is.
    Thanks in advance.

    I wasn't able to understand what was meant by this post. Therefore, I modified the standard template HeadLine View.
    Columns for this template are defined in the include slim_search_result_table_header_setup (in std_page.htm).
    Here is the modification of the code:
    <$if customTemplateId and not (baseTemplateId like customTemplateId)$>
              <$columnsString = utGetValue("customlisttemplates/" & strLower(customTemplateId), "columns")$>          
              <!-- Modify START by Oracle-->
         <$else$>
    <!-- here add default fields -->
              <$columnsString="dDocName,dDocTitle,dInDate,dDocAuthor"$>
    <!-- here add your custom fields -->
              <$columnsString=columnsString&",xComment"$>
              <!-- Modify END by Oracle-->
         <$endif$>

  • Simple but strange behaviour of "suppress result rows"

    Hi,
    In one of the Query, for all the characteristics, the result rows are suppressed but strangely when i execute it on web i see the result row is getting dispalyed for one char.
    But when i go back and check my query designer,for every char i see suppress result row is set to Always...but i don't know why it is not reflecting on the web
    Now can any one please suggest how to suppress this on web permanently..
    Note:on the Web we can select the char and right click and change this feature in properties but it is a one time actitivity,Becuase when we try to execute the report once gain the result row again appreaing!!!
    when we execute the same report in BEx analyzert eh result rows is NOT shown up but only in web it is apprearing
    Is there any permanent way????????

    Hi Swapna,
    If you get the same behaviour after reopening the Web Template, you can use command "SET_RESULT_VISIBILITY" to suppress the result rows of that characteristic at Web Template level.
    Check this link for more details.
    http://help.sap.com/saphelp_nw70/helpdata/en/43/d828d988ef05f6e10000000a11466f/frameset.htm
    Regards,
    Rk.

  • No result row for most granular char in a query. why is this?

    I am creating a query for customer Aging report. Now if the Billing document is the most granular in the query, can i not get the result row for each billing document number.
    I have Billing doc, company code, sales org,controling area, reference key.....etc
    But when I turn on suppress result rows never on the Billing doc char., I don't see a Result row for each billing doc in the data set. Why is this?
    Thanks
    Simmi

    Check your other What should i do to see the subtiatals in the result. I tried to explain how the result rows work in BEx. Hope this helps!

  • How to create a hirarchy for this characteristic having lengh 50?

    Hi guru's
    I have a scenario like characteristic is having lengh 50.Now I want to create a hierarchy for this characteristic.
    But Hirarchy allows maximum lengh 32chrs only.
    So could you please let me know how to create a hirarchy for this characteristic having lengh 50?
    Thanks in advance
    Sivanand

    Isn't this the same question as here:
    Hi all, Have a problem, Please let me know urgently.
    Why the duplicate postings with different names??

  • Three Physical Samples withdraw from inspection lot 04  and then result record for all three

    Dear Gurus,
    We have 3 quality labs and each lab is sent a separate samples to inspect certain characteristics once we receive material from production. I have created an inspection plan and mapped these three labs as  work center in operation and then assigned MICs under each operation to inspect.
    Now my issue is how to map separate 3 samples to inspection lot generated from production  ( type-4) and also how to configure that to inspection plan.
    I have to result record for all these three physical sample as withdrawn from Lot based upon inspection plan as mentioned above.
    I can mention sample drawing procedure in inspection plan but how to map actual sample there.
    Any help will be greatly appreciated.
    Regards,
    Satish

    Hi Satish
    You are creating three operation for depicting three testing Labs.
    Against each lab (operation) you had assigned MICs as per your requirement.
    Now you have to assign a SDP along with inspection point type 200 for physical sample in task list.
    After prod confirmation system will create inspection lot along with a sample by default for 1st operation.
    For other operations you have to create samples manually referring the same inspection lot (QPR6).Remember to click ' Create Insp points' and mention operation.
    Release the samples in QPR4.
    Now when you go for result recording system would ask first for operation, so select the operation , then system will ask for insp point (sample no).There click on assign insp point , so system will provide the Sample no which were created in QPR6 for that particular operation.
    Please follow the steps and revert.
    Regards
    D Mohanty

  • Setting visible lines and blank rows for all users

    At Item Level for Shopping Cart, Confirmation and Invoice Creation there are settings for Number of Visible Rows and Number of Blank Lines (In Settings/Advanced Settings).
    How can this be changed for all users?

    Hi
    This is a user specific settings to be performed. in SRM 7.0
    Please prepare a document and educate the user to do. This is  the best solution
    Second Solution
    In Setting tabs there are two tabs -Basic Setting and Advance Setting
    check the webdynpro components and hide this for all users
    Regards
    G.Ganesh Kumar

  • How to query opening balance for all customer or Vendor for an speci. date

    Hi,
    How to query opening balance for all customer or Vendor for an specific date?
    Example:
    put any date and query will show all customer/ Vendor  that date opening/current balance.
    Regards,
    Mizan

    Hi mizan700 ,
    Try this
    SELECT T0.[DocNum] As 'Doc No.', T0.[CardCode] As 'Customer Code',
    T0.[CardName] As 'Customer Name',(T0.[DocTotal]-T0.[PaidSys]) As 'O/S Balance'
    FROM OINV T0 INNER JOIN OCRD T1 ON T0.CardCode = T1.CardCode
    INNER JOIN OCRG T2 on T1.GroupCode = T2.GroupCode
    INNER JOIN INV1 T3 ON T0.DocEntry = T3.DocEntry
    WHERE T0.[DocStatus] ='O'
    AND
    (T0.[DocDate] >='[%0]' AND T0.[DocDate] <='[%1]')
    Regards:
    Balaji.S

  • HT201304 How do I set password for all in app purchases?

    How do I set password for all in app purchases? xx

    In-App purchases cannot be made without entering your iTunes store account password.

  • In mdx how to get max date for all employees is it posible shall we use group by in mdx

    in mdx how to get max date for all employees is it posible shall we use group by in mdx
    example
    empno  ename date
    1         hari        12-01-1982
    1         hari        13-06-2000
    by using above data i want to get max data

    Hi Hari3109,
    According to your description, you want to get the max date for the employees, right?
    In your scenario, do you want to get the max date for all the employees or for each employee? In MDX, we have the Max function to achieve your requirement. You can refer to Naveen's link or the link below to see the details.
    http://www.sqldbpros.com/2013/08/get-the-max-date-from-a-cube-using-mdx/
    If this is not what you want, please provide us more information about the structure of you cube, so that we can make further analysis.
    Regards,
    Charlie Liao
    TechNet Community Support

  • SNR License Issue. How Can I Disable SNR for all Users?

    Hi,
    I Have an issue with SNR on CUCM 10.5 and with assignement of license type
    I have a cluster with 400 users.
    200 users use ip phone 3905 and should be use an Essential License.
    When system check for assignement of license type , itassign a Basic License instead of an Essential License, because it see that users have SNR Enabled.
    All users in my system have SNR enabled, and I can not disable it. All my user have Enable Mobility unchecked, and all my phone have Device Mobility Off, but system however see SNR enable.
    How can i disable SNR for all users? This is a feature that client don't need.
    I dont' have a sufficent number of licenses for support all 3905 in Basic License.
    thanks for help.
    Andrea

    Well actually, Mobile Identity wouldn't apply to a 3905 unless those phones had another line on a Dual-Mode device like an iPhone or Android phone.  So unless you have either of those in your system you can scratch that idea.  Someone else may chime in here and try to help a bit more as RD/RDP are the main SNR culprits.

  • How to create delivery device for all users ?

    hi
    help needed ...
    i activated delivery tool
    but i dont know how to create email devices for all users
    is there any api / manual action
    obiee version : Oracle Business Intelligence 10.1.3.4.1
    thanks
    yuval

    Yuval..u need to setup SA System in RPD..
    refer http://oraclebizint.wordpress.com/2008/04/25/oracle-bi-ee-101332-sa-system-subject-area-autoloading-profiles-and-bursting/

Maybe you are looking for

  • How to change the size of the web item text in WAD 7.0

    Dear All I am quite new to WAD and I am having a problem with changing the font size of a web text item I have searched already and someone suggested changing the Design property to  HEADER1 or HEADER2 etc and then I should be able to change the font

  • Custom Web Album Templates in Lightroom

    I work for a department at UMass Amherst, and we're considering using Lightroom to create our web albums. We used the beta, and there was no way to create custom HTML/CSS templates (besides hacking the code it produced every time). Is this a feature

  • Sent Messages not on POP3 Account

    I have a 700w on Verizon. My exchange server sync relationship is set up with my work email. I would like to add my comcast email as a personal account. One thing I have noticed is that when something is sent from my Treo, it does nto show up in my C

  • Unicode :  Chinese

    Hi ALL  , Recently we moved to Unicode , and we are facing problem with an interface program for citybank citybank -cityDirect  specification is based on the field position in the flat file,it identifies  fields from the field position. File is downl

  • Webclips don't refresh

    My webclips taken from Safari never refresh themselves, only by restarting the dasboard (e.g. after a real restart of the Mac) or by pressing Apple+R. I thought webclips should refresh automatically from time to time. Any idea?