How to supress dialog while ALV Grid output is send to Spool

Hi,
I need to get the ALV grid output in spool.But when i am executing my program using ALV grid function module with print parameter passed,first its giving a popup with default printer and number of copies and when i press ok for the popup ,spool request is created.But i dont want this popup to come while executing my program.It should create the spool request directly. How to solve this issue.
Regards
Shibin

Hi Shibin,
Try the below parameter in IS_PRINT Structure:
is_print-print = 'N'.
This will Supress the Dialog and create a Spool with no Immeadiate Output.
Hope This Helps you..
Thanks & Regards,
Suresh Karri

Similar Messages

Need to choose fields from alv grid output and send mail

Hi,
I need to choose few orders from alv grid output and send mail as PDF for chosen orders.
Suggest if possible and how.

Moderator message - Please do not post your requirements and ask the forum to do your work for you - post locked
Rob

How to edit the existing ALV grid output variants

Hi experts,
The requirement states that I need to rearrange the existing output layout of the ALV & add a few fields in it. Currently, the output layout is stored as a variant. The program uses the FM LT_DBDATA_READ_FROM_LTDX, to load the fields associated with the variant.
Please explain how can i modify the existing variant? If not, then how to create a new variant?
Thanks in advance!

You may use one of those FM
- REUSE_ALV_VARIANT_SELECT and REUSE_ALV_VARIANT_SAVE
- LVC_VARIANT_SELECT and LVC_VARIANT_SAVE
Regards,
Raymond

How to send the ALV GRID output to spool by using the print button in std t

How to send the ALV GRID output to spool by using the print button in standard tool bar.
We have created a button in the va02 transaction. If user click on the button the new screen will be display on that screen we are populating the alv grid output using the oops concept. But i am unable to send the output to spool using the print button in the standard tool bar.
I am able to display the Print parameter dialog box but i am not able to send it to spool.
Kindly help.
Thanks In Advance.
G.V.Ramana

Hi Shaik,
There is not properties button in my print screen.
MODULE user_command_0900 INPUT.
    WHEN 'EXCEL'.
      PERFORM excel_download.
    WHEN 'PRI'.
      PERFORM print_output.
form Print_output.
CALL FUNCTION 'RSPO_LIST_LAYOUT_FITS'
           EXPORTING
                columns        = 80
                device         = 'ANY '
                lines          = 65
                maxpenality    = 1999
           TABLES
                layouts        = lt_layouts1
           EXCEPTIONS
                unknown_device = 1
                OTHERS         = 2.
      IF sy-subrc = 0.
        LOOP AT lt_layouts1.
          IF lt_layouts1-penality < 1000        AND
             lt_layouts1-penality < l_min_penality.
            l_layout       = lt_layouts1-layout.
            l_min_penality = lt_layouts1-penality.
          ENDIF.
        ENDLOOP.
        IF NOT l_layout IS INITIAL.
          CALL FUNCTION 'GET_PRINT_PARAMETERS'
               EXPORTING
                    mode                   = 'CURRENT'
                    line_size              = 80             "#EC *
            new_list_id            = l_new_list_id
                    no_dialog              = l_no_dialog
                    layout                 = l_layout
               IMPORTING
                    out_archive_parameters = rs_arc_params
                    out_parameters         = rs_pri_params
                    valid                  = l_valid
               EXCEPTIONS
                    archive_info_not_found = 1
                    invalid_print_params   = 2
                    invalid_archive_params = 3
                    OTHERS                 = 4.
          IF sy-subrc NE 0.                                 " INS SLIN
          ENDIF.                                            " INS SLIN
          IF rs_pri_params-linsz LT 80 OR
             rs_pri_params-linsz LT gt_stack-s_lprint-width.
            gt_stack-print_line_break = 'X'.
          ELSE.
            CLEAR gt_stack-print_line_break.
          ENDIF.
          IF l_valid NE 'X'.
            rs_pri_params = ls_pri_params_sav.
            rs_arc_params = ls_arc_params_sav.
          ENDIF.
        ENDIF.
      ENDIF.
endform.                    " Print_output
    CALL METHOD gv_cost_tot_alv_grand->set_table_for_first_display
            EXPORTING
               is_layout         = gs_layout_cost_tot_grand
            CHANGING
               it_fieldcatalog   = gt_fcat_cost_tot_grand[]
               it_outtab         = gt_cost_tot_grand[].
Please check my code

In ME2N report for PO- How to get or add Vendor name in ALV grid output

Hl Everyone
How to get or add Vendor Name and payment terms in the ALV grid output for the follwing reports like ME2N and ME2V.
cuurently i am in 4.7 E version.
Kindly suggest..........
thanks in advance
Regards
Prashanth

Hi Pankaj
I knew that vendor name field is avaiable in ECC versions, but how to get the same field(vendor name) in 4.7 E vesion.
Kindly suggest
Regards
Prashanth

How to download alv grid output(with field catalog) into excel file format

Hi all,
How to download alv grid output(with field catalogs) into excel file format and same file has to download to application server.
Please help.
Regards,
Satya.

Hi,
On list where alv is displayed, select export icon( green color -> ),select spread sheet.
This will display records in Excel sheet.

How to append ALV grid output to LIST output

Hi,
I am working with Basis AUDIT MANUAL report for which i have to integrate around 50 standard transactions (SM37,SM35...etc) output and make it into one single report.
On execution of my report i have to get all the 50 transaction outputs sequentially.
Some standard transactions have ALV list display output and some have GRID display.I can able to append only list outputs by submit program and exporting list to memory.
Please suggest me how to get Alv grid output in midst of list output.
Regards
Kalpana.

You should post your question to the ABAP forum:
ABAP Development

Facing problem while downloading ALV grid Output into Excel

Hi Guys,
I am facing problem while downloading ALV grid Output into Excel.
It is downloading into excel, but all character columns first and next all quantity columns it is displaying. But I need columns order as it is in the grid.
If I take all columns as characters it works fine. But it will be problem for calculating total, subtotals of quantity columns
Can someone help me regarding this
thanks for your help

Hi,
Open up Excel on your desktop. Goto Tools > Macro > Security.
Make sure that your security is set to Medium (or less). SAP uses OLE automation to run the Excel instance and in Office 2003 (for example), Microsoft has increased their default security setting to High. With the High setting, the output to Excel fails.
Was this your problem? Don't forget those points, either.
check with this wetther it is solved or not.
Regards,
sana.

F4 - Help for field in ALV Grid Output

Hi,
I generated a report which gives output in ALV Grid output.
In the output, 1 of the field is editable.Here, for this field I need to have my own F4-Help.
I think the procedure to be followed is:--
Create a Search Help in SE11.
Link the Search Help to the editable field.
Please let me know if its the correct procedure.
I f yes, how can I link user defined Search Help to the editable field?
Thanks,
Shivaa........

Hi siva,
you can also do that way.
while filling the fieldcatalog use the parameter F4AVAILABL
for more info check
F4 help in ALV Grid...
f4 help for a field in alv grid
hope it helps you
Thanks!
Edited by: Prasanth on Mar 6, 2009 3:59 PM

How to implement 'hypelink' in ALV GRID

Hi,everybody,please tell me how to implement 'hypelink' in ALV GRID?
I just try to design a ALV GRID report but I do not kown the way of using 'hypelink'. I refer to some documents but failsed. somebody can help me and give a example including entire code.

1. Create a table where hyperlinks & corresponding handles are stored (TYpe LVC_T_HYPE)
DATA ls_hype TYPE lvc_s_hype .
data lt_hype type lvc_t_hype.
ls_hype-handle = '1' .
ls_hype-href = 'http://www.company.com/carrids/car1' .
APPEND ls_hype TO lt_hype .
2. In your list data table create additional field of type INT4 which will contain the handle of the hyper link (ex. '1' for above hyperlink)
DATA carrid_handle TYPE int4 .
3. For the field which shall contain the hyperlink, make an entry in the field catalog indicating the field name which contains handle for the hyperlink. This is done by setting the handle field name in WEB_FIELD.
ls_fieldcat-fieldname = 'CARRID'
ls_fieldcat-web_field = 'CARRID_HANDLE'.
4. While calling set_table_for_first_display, pass the hyperlink table created in step 1 to parameter 'it_hyperlink'
~Piyush Patil

ALV Grid output

Hi,
I have one issue on ALV Grid output.
Some times we will not have any values to display in ALV Grid output.
In such cases we usually have to display 'No Data found' in report output message(Below report header).
How to acheive this as all my ALV grid fields are of less length.
Note: Message should be displayed below ALV Header (Where we usually get 1st record to be displayed).
What is the solution for the same!
Thanks,
Deep.

Hello Deep,
You can try with,
MESSATE 'Data not Found' TYPE 'I'.
Bye
Gabriel P.-

Push Button in Every record in ALV grid output

Dear Experts,
I need to print a push button in first column of every record in ALV grid output. How ?
No OOPS concepts please.
Thanks,
Siva.

For this requirement, you have to copy the standard PF status of the ALV output. Do as below :-
1) Go to SE41
2) Enter the program name as SAPLKKBL
3) In the field status enter STANDARD_FULLSCREEN
4) Click on STATUS button on the application toolbar.
5) Enter the name of your Program & a new status name.
6) Click on COPY.
This way the standard status will be copied to the custom status & call the same status in your program using SET PF STATUS statement. Then double click on the custom status name & you will be navigated to SE41, there you can add you new button on the application tool bar & assign a function code, which you can program by enabling the export parameter I_CALLBACK_USER_COMMAND of the Function module REUSE_ALV_GRID_DISPLAY.
Just a sample code snippet for your reference :-
FORM USER_COMMAND USING L_UCOMM LIKE SY-UCOMM
LS_SELFIELD TYPE SLIS_SELFIELD.
CASE L_UCOMM.
WHEN 'your function code goes here'.
Do further processing.
This way you will have the standard PF status alongwith your button as well.
Edited by: Kumar Manas Mishra on Jan 29, 2010 1:03 PM

Color in ALV grid output based on condition

Hi,
I have generated a ALV Grid output.
I have a internal table ITAB1. It has 2 fields - field1 and field2.
Now, my requirement is if field1 is 'X', the row should be colored in RED, else if field1 is 'Y', the row should be colored in GREEN.
How can it be done?
Thanks,
Shivaa.........

Hi,
add another field in the internal table with the type of char04.
use the code given below....
DATA : begin of itab occurs 0,
              field1(10) type c,
              field2(10) type c,
              color(4) type c,
          end of itab.
" fetch records in itab..
loop at itab.
if itab-field1 = 'X'.
      itab-color = 'C700'.         " Trial and error to get the color you want...
elseif itab-field1 = 'Y'.
      itab-color = 'C300'.         " Trial and error to get the color you want...
endif.
endloop.
fs_fcat-fieldname = 'FIELD1'.
fs_fcat-col_pos = 1.
fs_fcat-coltext = 'FIRST FIELD'.
APPEND fs_fcat TO t_fcat.
fs_fcat-fieldname = 'FIELD2'.
fs_fcat-col_pos = 2.
fs_fcat-coltext = 'SECOND FIELD'.
APPEND fs_fcat TO t_fcat.
    fs_layo-sel_mode = 'A'.
    fs_layo-INFO_FNAME = 'COLOR'.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY_LVC'
    EXPORTING
      i_callback_program    = sy_cprog
      is_layout_lvc         = fs_layo
      it_fieldcat_lvc       = t_fcat
    TABLES
      t_outtab              = itab
    EXCEPTIONS
      program_error         = 1
      OTHERS                = 2.
This resolves you issue....
Cheers,
Siddarth

Problem in displaying Alv grid output using oops........

hi,
i have two problems in displaying ALV grid output Using Oops.
1) How to modify the fieldcatalog after we getting a field catalog using general FM.
2) initialy it is displaying 13 fields but there are 63 fields .
eventhough we chage the layout to 63 fields it is displaying only 13 fields , these 13 fields may be different based on our selection but count of displayed fileds are same . how can display 63 fields at a time .

Hi,
You can chnage using below code:
loop at gt_fieldcat.
if <gt_fieldcat-field_name> = 'FIELDNAME'.
endif.
modify gt_fieldcat.
clear gt_fieldcat.
endloop.
Make sure that all the field should not have no_out = 'X' and tech = 'X'.
Thanks,
Sriram Ponna.

Displaying the selected rows in ALV Grid output

Hi Experts,
I am developing one interactive ALV Grid report where user can process the selected records/rows from the ALV Grid output.
for displaying the ALV Grid, I have used the class CL_GUI_ALV_GRID class. I am working on ECC 6.0 system.
when I select any records/rows from output and then press any Application Toolbar button, PAI and then PBO modules of the screen gets executed as per the normal flow.
however After PBO, when same ALV output comes, all the selected/highlighted rows appear as unselected, that means I want to retain the ALV
rows selection during the round trip.
please advise.
Regards,
Jagesh

Hi,
Feiyun Wu is correct.
Get_selected_rows and set_selected_rows are the methods to be used .
Some code:
Note the sequence of code:
FORM set_gui_alv_grid_1 .
DATA: wa_layout TYPE lvc_s_layo ,
        wa_print TYPE lvc_s_prnt .
DATA: it_sort TYPE lvc_t_sort ,
        wa_sort TYPE LINE OF lvc_t_sort .
DATA: it_fieldcatalog TYPE lvc_t_fcat.
IF gui_custom_container_1 IS INITIAL .
    CREATE OBJECT gui_custom_container_1
      EXPORTING
        container_name = 'GUI_CUSTOM_CONTAINER_1'
      EXCEPTIONS
        cntl_error                  = 1
        cntl_system_error           = 2
        create_error                = 3
        lifetime_error              = 4
        lifetime_dynpro_dynpro_link = 5
        OTHERS                      = 6 .
    IF sy-subrc <> 0.
    ENDIF.
    PERFORM get_field_catalog
      USING gc_log_group_1
      CHANGING it_fieldcatalog .
    CREATE OBJECT gui_alv_grid_1
      EXPORTING i_parent = gui_custom_container_1.
    CREATE OBJECT ob_event_receiver_1
      EXPORTING log_group = gc_log_group_1 .
* registers the event handlers
    SET HANDLER ob_event_receiver_1->handle_toolbar      FOR gui_alv_grid_1 .
    SET HANDLER ob_event_receiver_1->handle_user_command FOR gui_alv_grid_1 .
    SET HANDLER ob_event_receiver_1->print_top_of_page   FOR gui_alv_grid_1 .
    SET HANDLER ob_event_receiver_1->hotspot_click       FOR gui_alv_grid_1 .
    wa_layout-cwidth_opt = abap_true .
*   wa_layout-excp_fname = gc_excp_fname .
*   wa_layout-ctab_fname = gc_ctab_fname.
*   wa_layout-excp_led   = abap_true .
    CALL METHOD gui_alv_grid_1->set_table_for_first_display
      EXPORTING
        is_layout       = wa_layout
        is_print        = wa_print
        i_save          = 'A'
        is_variant      = gs_disvariant_1
      CHANGING
        it_sort         = it_sort
        it_fieldcatalog = it_fieldcatalog
        it_outtab       = it_alv_grid_1.
ELSE .
    CALL METHOD gui_alv_grid_1->refresh_table_display.
* Restore selections
    CALL METHOD gui_alv_grid_1->set_selected_rows
      EXPORTING
        it_index_rows = ob_event_receiver_1->it_rows.
* Restore position
    CALL METHOD gui_alv_grid_1->set_scroll_info_via_id
      EXPORTING
        is_col_info = ob_event_receiver_1->wa_col
        is_row_no   = ob_event_receiver_1->wa_roid.
ENDIF.
ENDFORM .                    "set_gui_alv_grid_1
Regards.

How to supress dialog while ALV Grid output is send to Spool

Similar Messages

Maybe you are looking for