How to supress tab for Sales Order item (VA01)
Hi,
Please suggest the ways to suppress tab (example "Country") which appears at Sales Order item for some countries.
Thanks,
Edited by: Dipesh Kothari on Oct 6, 2009 8:34 PM
Hi
If you want to suppress the tab which is appearing at sales order line item then using t.code SHD0 and give the t.code VA01 and business object as BUS2032 and then select the line item data and then you can suppress the fields as per your requirement
Kindly let us know why you want to suppress the fields ?
Regards
Srinath
Similar Messages
-
How to do INIT for Sales order Itema Data (DS 2LIS_11_VAITM)
Hi all
I have a report on sales order item data, I have to reload it. DS 2LIS_11_VAITM
Can any of you pls explain me the steps to do the INIT? Refill set up tables etc
Many Thanks in advance
IshiHi Hari
Many Thanks for the explanation and steps. I deleted set up tables and executed to fill it.
It says in R/3 Start of Processing, I ticked to continue and its still running.
In the mean time I checked RSA3 and it says 1007 records selected. I am refreshing it and the no. of records are still the same.
Can you tell me how long it takes to fill the table?
And the R/3 system is still running (Start of Processing)
Thanks again
Ishi -
Wrong short text for sales order item
Hi guys,
I have an issue for the short text for sales order item. It is werid that I get the different short text depends on how we enter the material. If we only enter the material #, we get the short text for sales order item from material master data. If we enter the material #, plant and storage location, we get the short text for sales order item from customer material infor record. However, the customer material infor record is only maintained for inter-compnay transaction. System should not pick it for third-party transaction.
I found a code in FV45PFAP_VBAP_FUELLEN:
Bei Primärbedarfen ist MAAPV-ARKTX nicht relevant
if vbak-vbtyp ne vbtyp_pbed.
vbap-arktx = maapv-arktx.
endif.
Kundenmatinfo hat höhere Priorität
if knmt-postx ne space.
vbap-arktx = knmt-postx.
endif.
if da_arktx ne space and
svbap-tabix = 0 and
vbapin-matnr = vbap-matnr.
vbap-arktx = da_arktx.
endif.
But it is nothing customized. Who can tell me what is wrong here?
Thanks,
DLHi,
Text coming from source (MMR, CMIR etc.) is being "pulled" via the access sequence. Check the Text analysis in your sales order in Tab Texts, at item category level. -
How to configure rescheduling for sale order quantities
kindly explain how to configure rescheduling for sale order quantities that are created last month. kindly explain. i am in urgent.
regards,
g.v.shivakkumarHi,
Short text
Rescheduling sales and stock transfer documents: by material
Description
The 'Rescheduling' program (SDV03V02) processes sales document items that are contained in the item directory for the material. It takes into consideration open items and schedule lines from stock transfer items, stock transfer scheduling agreements and purchase order requests (items only), referred to hereafter as stock transfer documents, for the materials.
All sales documents for the material that are still open are selected. This means that the material index must be activated for at least all sales document types, whose items may have requirements. All stock transfer documents or items for the material that are still open are also selected. Open in this case means for example, that there is no deletion indicator, that the item from a stock transfer purchase order request cannot be labeled as completed or that the quantity delivered and posted to goods issue for the item in a stock transfer purchase order is the same as the amount ordered. An availability check can only be carried out if a checking rule is assigned to the document type - if this is not the case, the document or document item is not checked.
Checking rule 'A' is used as a basis for rescheduling sales orders (exceptions to this are rush orders they use checking rule B, and orders with individual customer stock; they use checking rule AE). Stock transfer documents use the checking rule that is assigned in Customizing for Purchasing. It is important that the scope of checks is consistent for both the stock transfer documents and the sales documents and that they do not exclude each other, as this can lead to incorrect test results. An example of an incorrect setting would be: The scope of check for checking rule 'A' checks delivery schedules for stock transfer purchase orders and stock transfer purchase requests, however the scope of check for the checking rule for the stock transport scheduling agreement does not.
The items and schedule lines found in the selection are sorted according to 'Priorities' - document category, delivery priority, creation date of the item or schedule line (for stock transfer purchase orders and delivery plans) entered on the selection screen or according to the schedule line date of the earliest schedule line with order quantity, document number and item number and then transferred to the availability check. Priority 1 is highest priority and priority 5 the lowest. Stock transfer purchase order requests are sorted after stock transfer purchase orders and scheduling agreements, as they are less binding. This means that when you have identical sort criteria such as delivery dates, the stock transfer purchase order item is checked first and then the item from the stock transfer purchase order request.
The preset option 'Unconfirmed documents required' only carries out rescheduling for materials for which there is at least one unconfirmed transaction.
You can use the parameters 'Sorting criteria delivery date' to define whether sorting is carried out with the order quantity after the creation date of the item or the delivery date of the earliest schedule line.
If you mark the 'Simulation' field, the checked documents are not saved. Instead a results list is generated and saved. However, the availability check for the corresponding documents continues as if saving has taken place already, that is, that the simulated list corresponds to the actual one.
Under 'Options' on the selection screen, specify whether sales documents and/or stock transfer documents should be processed. For stock transfer documents you can enter whether stock transfer purchase orders and scheduling agreements should be processed at item or schedule line level:
Processing at item level:
All open schedule lines for the item are read and collected, then transferred to the availability check. To sort and prioritize documents, you do not need each individual schedule line. It is sufficient to have the item or data from the first schedule line. All open schedule lines for the item are processed and checked.
Example of processing at item level:
Sorting: Date (Delivery date first schedule line) - Document number - Document item
Doc. cat. Doc. number Doc. item Doc. schedule line Delivery date PO 4500000012 10 0001 26.01. PO 4500000012 10 0002 26.02. PO 4500000025 20 0001 28.01. PO 4500000025 20 0002 02.02.
You can see that the second schedule line for document 4500000025/20 from 02.02 was processed after the second schedule line for document 4500000012/10 from 26.02. This is because all open schedule lines for an item are read and processed. The first schedule line from 4500000012/10 has the earliest delivery date, therefore it has priority.
Processing at schedule line level:
Each open schedule line for an item is entered in document sorting in accordance with the values entered under 'Priorities'. The availability check is carried out for each individual schedule line.
Example for processing at schedule line level:
Sorting: Date (delivery date first schedule line) - document number -document item
Doc. cat. Doc. number Doc. item Doc. sched. line Del. date PO 4500000012 10 0001 26.01. PO 4500000025 20 0001 28.01. PO 4500000025 20 0002 02.02. PO 4500000012 10 0002 26.02.
Here you can see that each schedule line was sorted according to its delivery date. Note that this type of processing requires more runtime due to the individual checks and more frequent saving.
The results of rescheduling are saved, as long as the program was not started in simulation mode. When calling up from the 'Sales' area menu or when directly starting via the development environment, the iniator is informed via a dialog box that he has just started a process that changes data. He can then decide whether or not he wants to continue.
Checking procedure for stock transfer documents:
An availability check of stock transfer documents in rescheduling is carried out in accordance with the check carried out when manually creating a document. If, however, the required quantity for a schedule line is not available on a particular date and will not be ready until later, new schedule lines are created for the stock transfer purchase orders and scheduling agreements, containing the relevant data. New items are created in this case for stock transfer purchase order requirements. The total sum of schedule line quantities for a processed schedule line corresponds to the schedule line quantity of the original schedule line.
First example: Using a stock transfer purchase order item with a schedule line:
a) Status of item before rescheduling run:
Del. date PO quantity Confirmed quant Confirmed del. date 23.07. 50 items 0 items -
==> This now affects the stock/requirement situation:
- Goods issue is posted for the material in the delivering plant on the 23.07.
- A purchase order of 10 items was created for the material in the delivering plant. Delivery is expected on the 29.07.
b) Status of stock transfer purchase order item after rescheduling run:
Del. date PO quantity Confirmed quant Confirmed del. date 23.07. 40 items 40 items 23.07. 29.07. 10 items 10 items 29.07.
==> The first schedule line was changed in accordance with the results of the rescheduling availability check. Only 40 of the 50 original items could be delivered on the 23.07. Therefore, a new schedule line is created for the rest on the 29.07. for 10 confirmed items.
Second example: Same output situation as the above example.
==> There is now a change in the requirement/stock situation:
A purchase order for 10 items is created for the material in the delivering plant. Delivery is expected on the 29.07. A further purchase shows another 40 planned items on the 30.07.
Status of stock transfer purchase order item after rescheduling run:
Del. date PO quantity Confirmed quant Confirmed del. date 29.07. 10 items 10 items 29.07. 30.07. 40 items 40 items 30.07.
==> The first schedule line was changed in accordance with the result of the availability check for rescheduling. The original delivery date is set to the date confirmed in the ATP check. A new schedule line is created for the remaining 40 items, that are available on the 30.07.
Note:
Any set fixed delivery date and quantity indicators and creation indicators for schedule lines or items are 'inherited' by newly created schedule lines. Assuming that the original schedule line was fixed in the above example (since it is created manually), this indicator is also set for the newly created schedule line.
If shipping scheduling is activated for a stock transfer document type, this is also implemented for newly created schedule lines, with the exception of route schedule determination. This means that in the current version of the program no route schedule has been determined for a schedule line containing a route schedule for which new schedule lines may need to be created.
The results of the run are issued in the form of a list, which is also saved, so that the results can be controlled at a later date. This is done using the function 'Evaluate rescheduling', but it is only a good idea to do this after the first rescheduling has taken place. You can restrict selection requirements but these can however affect the runtime. You can use this function to analyze the saved list until the next rescheduling run, which writes over the result. If you start rescheduling in the background, a spool file with the result list referred to will be created in the corresponding setting. You can see this in spool management.
Output
A list of changed documents, a list of documents in which an error occurred during processing and as a result were not changed, can be called up via the menu 'Edit - Error log'. If in a subsequent evaluation a restricted selection is carried out, a note appears at the end of the list to say that not all document items are displayed.
You can set the scope of the list under the menu option 'List' in the list display. You can view improvements, deteriorations and the whole list. Before the documents can be included in one or either of the restricted lists, the date or quantity has to have changed so that the item can be contained in both the list of improved or deteriorated documents.
You can use the interface for changing transactions and the order list to navigate. Use 'Back' to exit the list and 'New selection' to return to the selection screen.
Recommendation
You should only start this program occasionally and use very restricted selectin criteria during working hours as it requires enormous system resources.
Note
The columns for 'New date' and 'New confirmed qty' only contain entries if the dates or quantities have changed.
As the system only runs the change check (dates/quantities) per line in the original list, an item whose backlog has increased in the list of improvements. This occurs, for example, if the whole quantity can be delivered at once but at a later date. In this situation, the system determines an increase for the line when it compares quantities.
Regards,
Amrish Purohit -
BOM Cost Estimate for sales order items
Hi experts,
Which data source could extract data created by CK51N (Order BOM Cost Estimate )? We need to get BOM Cost estimate (including input material and activity) for sales order items.
The closest one is 0CO_PC_01, but it extracts itemizations for production order.
It's urgent.Helpful answers would be awarded.Thanks.
Regards,
AaronHi Henry,
They even do not have Sales Order segment. How could I get cost estimate data based on sales order?
Regards,
Aaron -
Function Module or BAPI to update Short text for sales order item(vl02n)
Hi All,
I need to update the Short text for sales order item in vl02n transaction from an internal table with Delivery number and other relevant details .
Does any body know any Function Module or BAPI which can accomplish this purpose .
Or else writing BDC is the only option I have got ? .
Please clarify .
Thanking you in advance .
With Regards,
Suriya .Hi
You can try using BAPI_SALESORDER_CHANGE if you want to change sales order
Regards
MD -
Transaction to maintina Billing Plan for Sales order item
Hi All,
Is there any transaction other than VA01/VA02 to maintian Billing plan for Sales order item.
Thanks & Regards,
Rajanidhi Rajasekeran.It is possible to maintain Billing Plan in Sales Document Type (VOV8), as well as Item Category level (VOV7). As you want it at Item level, maintain the same in Item Category Configuration at Item level & it will by default be captured in Sales Order at Item level.
Step 1: Sales Document Type
IMG > Sales and Distribution > Sales > Sales Documents >
Sales Document Header:
1. Sales Document Type:The sales document types represent the different business transactions, such as Inquiry, Quotation, Sales Order, etc. To create new sales order type, always copy as with reference to similar sales order. If possible use standard sales order.
2. Define Number Ranges For Sales Documents: Maintain number range with discussion with core team.
3. Assign Sales Area To Sales Document Types:
A. Combine sales organizations / Combine distribution channels / Combine divisions: Ensure to maintain these, else Sales Order creation will give error.
B. Assign sales order types permitted for sales areas: Assign only required Sales Order Types to required Sales Area. This will minimize selection of Sales Order Type as per sales area.
Sales Document Item:
1. Define Item Categories: If possible use Standard Item Category. Incase if required to create new, copy as from standard & maintain New.
2. Assign Item Categories: If possible, use standard. Formula for deriving item category: Sales Document Type + Item Category Group + Usage + Higher Level Item Category = Item Category
Regards,
Rajesh Banka -
Surcharge rate for sales order item condition
Hi,
I have a two condition for sales order item.
First condition is ZP00-Price. It is using for automatically price with customer and material. It linked with account key in pricing procedure.
Second condition is ZI00-Index rate. Calculation type is A-Percentage. This condition value is monthly. It will be used for surcharge with percantage . I have a formule this condition.
It is not linked with account key in pricing procedure.
Formula for ZI00 - Index rate:
(Index Rate to delivery date - 1 / Index Rate to contract start date) x 100
For example;
Index rate conditions is entrying monthly;
Index date Index%
01.08.2008 1,05
01.09.2008 1,15
01.10.2008 1,17
Contract start date = 03.08.2008
Delivery date = 02.10.2008
ZP00 = 500
ZI00 = Index rate for sales order item = ((1,17-1)/1,05 ) * 100 = 16,19
Last condition value = 500 + (500 * 16,19)/100 = 500 + 80,95 = 580,95
What can I do for this pricing?
Best Regards
Gulay CelikHi
I think that perhaps it is too late. The application supports cancellation and re-billing as separate transactions. Maybe this is not a 'development' problem.
Cheers
Dom -
How to put some tabs in sales order item level invisible mode
Hello Gurus ,
Good evening everybody ,
We have some specific requirement from the client - Client does n't want few end users to see the price details in sales so they want the condition tab to be invisible mode in sales order item lvel only for few users i.e the condition tab should not be displayed for that user is this possible ?
Note : I only have idea setting few fields in sales order but not tabs in sales order through screen variant -SHD0
Looking for your inputs
Thanks and regards
VenkatHi,
There are a couple of options you can go with.
1) You can use Transaction and Screen variants to create your own ZVariant and then put that to user profile. Allow the user to run only with the variant you setup for the user via authorizations.
2) Get GUIXT software by Synactive, to perform the above task for you.
3) If you happen to have latest version of SAP ECC i.e. 6.0 with EHP3 or above, you can go with NWBC (Netweaver Business Client).
Thanks
Kapil Sharma -
WBS element for Sales Order Item level
Hi gurus,
I am trying to create an inbound idoc for sales order ' VA01'. I need to populate WBS element in the item level under Account Assignment Tab. I am using ORDERS05 basic type. Please help to find which segment to use for WBS element. Waiting for your reply. Please help.
Regards,
Satyajit
Edited by: Satyajit Saha on Feb 22, 2008 1:24 AMHi gurus,
I am trying to create an inbound idoc for sales order ' VA01'. I need to populate WBS element in the item level under Account Assignment Tab. I am using ORDERS05 basic type. Please help to find which segment to use for WBS element. Waiting for your reply. Please help.
Regards,
Satyajit
Edited by: Satyajit Saha on Feb 22, 2008 1:24 AM -
How to get PO from sales order item in CRM
Hi,
I am building a BI extractor which needs PO for a given complaint. I am able to get the sales order/item for a complaint using crm_order_read FM. Is there anyway to get the PO based on this SO-item. Are their tables that link these two.
Thanks!Table CRMD_ORDERADM_I -> Give Item GUID in filed GUID and get the document header guid in field HEADER. Then use function module CRM_ORDER_READ and table ET_SALES to get the Sales Data for the right item. The PO you are interested in can be any of the fields related to PO in this set. Usually it is PO_NUMBER_UC.
Alternately, if you want to use only the table reads use this.
1. Table CRMD_LINK --> get the record with GUID = Item GUID and OBJTYPE_SET = 11 (for Sales Set)
2. Table CRMD_SALES --> get the record with GUID = CRMD_LINK-GUID_SET
Get your PO information from this Sales set record for your item. But since, PO is usually associated with the header, you can do the same as above but with the GUID = Header GUID in the CRMD_LINK table. -
How to enable GOS at sales order item
Hi Experts,
I have a requirement where I have to provide the customer an option to see the workflow overview at sales order item level (using Generic Object Services).
I have developed a class based custom workflow for sales order approval and wish to intergrate GOS in VA02/VA03 at item level and not header level. I know that this is possible at header level using Business Object 2032. But I wish to know if this is possible at item level and that too in a class based workflow approach.
Please provide your valuable suggestions.
Thanks,
AjayHi Janos,
Thanks a lot for your reply. The breakpoint wasn't triggered in FM SUSR_USER_LOGONDATA_GET. Please check if the steps I followed are correct.
1. Set external breakpoint in the FM SUSR_USER_LOGONDATA_GET.
2. Run transaction VA02 for an order pending approval.
Am I missing something here ? Do I need any authorization ?
Thanks,
Ajay -
I'm looking for BAPI, which returns all items for sales order.
Returned items must have included all information, which we can see in transaction va02 on card Item Overview
I'll reward with points for good BAPI.
BR TomekIn the i_bapi_view structure, populate which tables you would like to have returned by using a value of X.
Use the sales documents table to pass which documents you want information on.
So if you wanted item details:
i_bapi_view-item = 'X'.
sales_documents-vbeln = '0000012345'.
append sales_documents.
call function 'BAPISDORDER_GETDETAILEDLIST'
exporting
i_bapi_view = i_bapi_view
tables
sales_documents = sales_documents
order_items_out = order_items_out. -
How to know if a Sales order item created with or without reference
Hi,
I am working on user exit USEREXIT_MOVE_FIELD_TO_VBAP, and I just wanted to know if there is a way to know if a sales order item is created with or without reference to a contract.
I need to write the code in USEREXIT_MOVE_FIELD_TO_VBAP, however, when an SO line item is created with reference the userexit is being called twice and when the SO line item is created without reference the user exit is being called only once.
My aim is to check if a SO line item is created with reference to a valid contract. If the item is without reference to a contract or the referenced contract is not valid, then I will have to determine the contract based on the customer contracts.
Any help on this would be greatly appreciated.
Best regards,
SivaHi Vindo,
The Userexit USEREXIT_MOVE_FIELD_TO_VBAP is called twice when the SO line item is created with reference to contract. The first time the user exit is called there will be no value filled in vbap-vgbel and the second time it comes to the userexit then vbap-vgbel will have a value. I think CVBAK-VBELN will contain the reference if the so line item is created with reference and the value of CVBAK-VBELN contrains blank if the item is not referenced. Anyway thanks for your reply.
Best regards,
Siva -
How to block deleteion of sales order items
We need to be able to block users from deleting sales order items. The objects V_VBAK_VKO and V_VBAK_AAT can be used at the 'order header' level but these do not prevent a user deleting an individual item in an order. Does anyone know of a way of achieving this through authorisations?
Thanks for your responses. We have decided to use USEREXIT_CHECK_XVBAP_FOR_DELET in MV45AFZB with some code based on the AUTHORITY-CHECK syntax below:
AUTHORITY-CHECK OBJECT 'S_CARRID'
ID 'CARRID' FIELD pa_carr
ID 'ACTVT' FIELD '03'.
IF sy-subrc = 4.
MESSAGE e045(sabapdocu) WITH pa_carr.
ELSEIF sy-subrc <> 0.
MESSAGE e184(sabapdocu) WITH text-010.
ENDIF.
In our case we will reference object V_VBAK_AAT.
Maybe you are looking for
-
What is the diffrence between ASCII and BIN mode
Hello All, What is the diffrence between ASCII and BIN mode Regards, Lisa.
-
Problems with Video Sound on Treo Pro
I can not get any sound on my Treo Pro when accessing Video on the Internet, such as YouTube. Can someone solve my problem? Thanks Post relates to: Treo 800w (Sprint)
-
I am attempting to create a UI that looks a lot like the editor pane in netBeans. My problem is that I cant seem to find the container that splits the screen into three areas such as the one shown below: | | | | | | | | | | |------------| | | | | | |
-
What version of Forms is required to migrate using JHeadstart ?
Hi, I currently have a client who is looking to move away from their existing Forms 4.5 character mode application. These are the options: 1) Forms 4.5 -> Forms 6i -> Forms 9i ( stop here ) or... 2) Forms 4.5 -> using JHeadstart migrate to a Java sol
-
Hi all, For some time now, my appstore app shows an update available for CodeBox, which I did not buy. When I try to update it it asks for my ID and password (all normal), but then it gives an Unknown Error. I am 100% sure I didn't buy the app, I do