How to sure that our system is FIFO or LIFO

Dear guru,
i have one dout about FIFO or LIFO system actually my problem is that when i manufture the FG material than it take the maxium qty (which availabe in stock) material consume is background it did not take the aging material .(My scanrio is make to stock and we use stragies group 40 ,discreate manufacting).
give me help
Thanks,
Anurudh singh

HI,
FIFO or LIFO can be set as strategies during stock placement and stock removal in Warehouse.
Strategies are set for the storage type and the storage type would be assigned to the material in the material master
U can check in Img -Logistics Execution-Warehouse manageemnt -strategies-LIFO stredaegy or FIFO
Regards
KK

Similar Messages

We have mac os X 10.5.8 we tried to upgrade with the new firefox 4. it removed our old firefox and replaced it with firefox 4. Now we get a message that our system does not support the new firefox. All our bookmarks settings are gone. Please advise.

When we tried to open firefox 4, all previous settings and bookmarks were gone. Firefox 4 gives message that it is not supported by our system. IMAC G5 power PC with 2 gigs of Ram. Is there any way to restore the old firefox?

Hi everyone,
Many of you have had problems with Spotify for Mac OS X 10.5. We no longer support Spotify on this operating system which we announced back in November here as a "heads up".
However, we've noticed that many folks have been updating regardless which should not be the case. Our intention was to let anyone using Mac OS X10.5 continue using a "legacy" version of Spotify. In any case, the folks who were using 10.5 were updated, and in many cases these customers have experienced crashes with the newest version of the application (Spotify version 0.8.8. at the time of writing).
To make a long story short, we messed up in updating folks who should not have been updated and we're sorry. We plan on fixing the problem of Spotify updating to the latest version for Mac OSX 10.5 users and we're working on it as I write this. If you're a person who has already upgraded and the application is crashing, we're looking into a solution and we hope to have an update shortly.
Warm regards from your humble community manager,
Rorey

How to Open a Our System's Connection For access by SAP AG

Dear Sir/Madam,
For our sap system access by SAP AG, I need to OPEN my SYSTEM and to provide LOGON DATA to SAP AG.
Would any one help me HOW TO OPEN MY SYSTEM for SAP AG ACCESS and by LOGON DATA, what they mean.
Our SAP system is ECC5.0
Product Version SAP ERP 2004
Operating System AIX 5.3
Database ORACLE 9.2.0.4.0
Technical Usage Type ERP Central Component (ECC)
Any Pointer will be highly appreciated.
Thanks and Rgds,
Pranab

Hi,
Check this link
http://service.sap.com/serviceconnection
Note 35010 - Service connections: Composite note (overview)

How to verify that the system isn't infected with a virus

Does anyone know how to check to see if your system has been infected with any type of malware? I read in an article at zdnet.com that there was a Mac OS X trojan spotted, but the article did not say how to locate whether or not you had been infected. I do not have a virus checker on my computer. Someone gave me a suggestion to go to the terminal and type in the following:
ls /Users/Shared/.*.so
Any comments?

fane_j wrote:
Sally R. wrote:
Someone gave me a suggestion to go to the terminal and type in the following:
ls /Users/Shared/.*.so
This was published on MacWorld's site, and it's not a very good tip. Try this instead
ls -la /Users/Shared/*.so
Turns out I was wrong about that. Somebody else suggested something even more complicated and got this reply:
By bastion
Fri Feb 24 08:49:05 PST 2012
PeterSParker said
Your terminal statement has an extra "." in it that prevents it from working.
Also, you should add the options -alR to show what is happening, and to search subdirectories.
The revised command looks like this:
ls -alR /Users/Shared/*.so
The above is completely wrong. The command as shown in the article is appropriate.
The "." is not extra and doesn't prevent the command from working. It's specifying that you're listing files that start with a period and end with ".so" with anything in between being matched.
Because you're explicitly searching for things that start with "." you don't need the -a flag.
Because you only care about simple existence and not any metadata you don't need -l.
Because the files of interest are installed in /Users/Shared directly, and not subfolders thereof, you don't need -R.

How to determine if my system Bios is 786G1?

I just received a HP dc7900 convertable minitower without an operating system and before I install the O/S I want to update to the latest BIOS and then install the latest Intel Management Software.
The latest Bios listed says to make sure that you have the 786G1 bios [HP Compaq Business Desktop System BIOS (786G1 BIOS)]
I currently have Bios version 1.16 installed and need to update it. How can I be sure that my system has the 786G1 bios?
Thank you for your help in advance...

This is a peer-to-peer user supported forum for HP consumer class products. HP maintains no official presence on this forum. It is unlikely that HP will respond in an official capacity. Any reply from a HP employee represents their own opinion and not that of HP's.
You should be able to locate the BIOS information on one of the informational screens in the BIOS. However, if you download the BIOS update and go to flash the BIOS, the flash routine should tell you (before it flashes the BIOS) whether or not the update is correct for the BIOS installed on your computer.
The HP Compaq dc7900 series of computers are business class computers and as such, your questions may be better answered in the HP Business Support Forum.
Please see HP Business Support Center - Get help from HP to contact HP directly with your support questions.
Please click the white KUDOS star to show your appreciation
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

How to integrate with RMS system

Hi experts,
I want to integrate RMS(Retail Management System) with SAP PI system.
Is it possible to integrate?
If possible, Can you give me Idea How to integrate with this?
Thanks & Regards,
Poonam.

> Want your more help. If I want to use SOAP adapter to integrate with RMS system.
> So, what are the prerequisites are required in RMS system to be integrate with SAP PI through SOAP adapter?
>
Fist you have to make sure that RMS system showuld accept SOAP messages, that means u will send payload to RMS in the form of SOAP meesage using SOAP receriver Adapter.
RMS system people have to provide URL , u will send data to address specified in URL.
using Adapter is compmetely depend on Source or Taget system, betetr to talk with RMS system people like how they will take data from other systems,besed on that you can decided.
Regards,
Raj

How can I make sure that in RAM our sql server is not facing any mermory crunch issue?

The SQL server process always show RAM is highly used while its a default behaviour of sql server.
How can I make sure that in RAM our sql server is not facing any mermory crunch issue?
Thanks

The SQL server process always show RAM is highly used while its a default behaviour of sql server.
How can I make sure that in RAM our sql server is not facing any mermory crunch issue?
Thanks
The best way to make sure you are not facing memory pressure is to use perfmon counters and monitor various memory counters
For SQL Server 2005 - 2008 r2 use below counters
SQLServer:Buffer Manager--Buffer Cache hit ratio(BCHR): IIf your BCHR is high 90 to 100 Then it points to fact that You don't have memory pressure. Keep in mind that suppose somebody runs a query which request large amount of pages in that
case momentarily BCHR might come down to 60 or 70 may be less but that does not means it is a memory pressure it means your query requires large memory and will take it. After that query completes you will see BCHR risiing again
SQLServer:Buffer Manager--Page Life Expectancy(PLE): PLE shows for how long page remain in buffer pool. The longer it stays the better it is. Its common misconception to take 300 as a baseline for PLE. But it is not,I read it from
Jonathan Kehayias book( troubleshooting SQL Server) that this value was baseline when SQL Server was of 2000 version and max RAM one could see was from 4-6 G. Now with 200G or RAM coming into picture this value is not correct. He also gave the formula( tentative)
how to calculate it. Take the base counter value of 300 presented by most resources, and then determine a multiple of this value based on the configured buffer cache size, which is the 'max server memory' sp_ configure option in SQL Server, divided by 4 GB.
So, for a server with 32 GB allocated to the buffer pool, the PLE value should be at least (32/4)*300 = 2400. So far this has done good to me so I would recommend you to use it.
SQLServer:Buffer Manager--CheckpointPages/sec: Checkpoint pages /sec counter is important to know about memory pressure because if buffer cache is low then lots of new pages needs to be brought into and flushed out from buffer pool,
due to load checkpoint's work will increase and will start flushing out dirty pages very frequently. If this counter is high then your SQL Server buffer pool is not able to cope up with requests coming and we need to increase it by increasing buffer pool memory
or by increasing physical RAM and then making adequate changes in Buffer pool size. Technically this value should be low if you are looking at line graph in perfmon this value should always touch base for stable system.
SQLServer:Buffer Manager--Freepages: This value should not be less you always want to see high value for it.
SQLServer:Memory Manager--Memory Grants Pending: If you see
memory grants pending in buffer pool your server is facing SQL Server memory crunch and increasing memory would be a good idea. For memory grants please read this article:
SQLServer:memory Manager--Target Server Memory: This is amount of memory SQL Server is trying to acquire.
SQLServer:memory Manager--Total Server memory This is current memory SQL Server has acquired.
8. Free List Stalls/sec – Number of requests per second that had to wait for a free page
9. Free Pages – Total number of pages on all free lists (free lists track all of the pages in the buffer pool that are not currently allocate to a data page, and are therefore available for usage immediately)
NOTE: If you have NUMA system don't use PLE to monitor memory condition it wont give correct value
From 2012 Onwards
Memory management has become easy from 2012 onwards as
Max server memory also allocated memory for requests which require memory >8KB
SQLServer:Memory Manager:Free Memory (KB)
SQLServer:Memory Manager:Target Server Memory (KB)
SQLServer:Memory Manager:Total Server Memory (KB)
For NUMA system its also wort monitoring each node.
Object - SQLServer:Memory Node:Total Node Memory
(KB)
Object - SQLServer:Memory Node:Target Node Memory
(KB)
Object - SQLServer:Memory Node:Free Node Memory
(KB)
Ideally if target server memory is less than or equal to total server memory there wont be memory pressure if target is > total it does not always means its memory pressure
BCHR would also give you good idea about memory pressure
If memory grants pending is frequently non zero there is memory pressure
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it
My Technet Wiki Article
MVP

How can we know that JVM is running in our system?

how can we know that JVM is running in our system?

On a *dows system you can use pslist and the like:
http://www.sysinternals.com/Utilities/PsTools.html
http://www.sysinternals.com/Utilities/PsList.html

How can I connect my Mac Book Pro (year 2008) to the TV set through HDMI? I've seen a DVI to HDMI iwire but I'm no sure that it is correct. Could anyone help me? Thank you very much.

How can I connect my Mac Book Pro (year 2008) to the TV set through HDMI? I've seen a DVI to HDMI iwire but I'm no sure that it is correct. Could anyone help me? Thank you very much.

I do not know the iWire adapter, but I use an inexpensive ($3) DVI to HDMI adapter from Monoprice, along with a regular HDMI cable:
http://www.monoprice.com/products/product.asp?c_id=104&cp_id=10419&cs_id=1041902 &p_id=2029&seq=1&format=2
Be aware that this will only transfer video. You Macbook Pro cannot combine audio through DVI to HDMI. You will need to listen to the audio through the Mac speakers, or attach speakers or a sound system to the Mac earphone jack, or determine if your TV has the ability to accept external sound from the Mac while showing video through HDMI (few can).

How to findout which Tibco adaptor is used in our system?

Hi All,
In our system ,which is a Java enterprise application ,Tibco adaptor is used to connect to the database.
That adaptor is going to be upgraded. I would like ot do a technical research on that. But im new to the system.
Could anyone help me ,how to findout which Tibco adaptor is used in our system?
Thanks in advance.
Ameena

There's nothing stopping you from using the generated sequence for something else, however you can NOT override it when doing an insert (as long as you've specified ALWAYS which is the default).
SQL> create table t
2 (some_id number generated as identity
3 ,name varchar2(30)
4 );
Table created.
SQL> select * from user_sequences;
SEQUENCE_NAME
ISEQ$$_91970
SQL> select ISEQ$$_91970.nextval from dual;
             NEXTVAL
                   1
SQL> select ISEQ$$_91970.nextval from dual;
             NEXTVAL
                   2
SQL> insert into t values (99,'smith');
insert into t values (99,'smith')
ERROR at line 1:
ORA-32795: cannot insert into a generated always identity column

HT201328 How can we test that our phone is unlocked after we restore our iPhone?

How can we test that our phone is unlocked after we restore our iPhone? I don't have access to another sim card at the moment. Only my AT&T sim card.

A sure way to check is to connect the phone to iTunes on your computer and click Restore iPhone (not Restore Backup). If the phone is unlocked near the end of the Restore iTunes will display "Congratulations. Your iPhone is unlocked."

Synchronous scenario: How to be sure that messages don't get lost?

Dear all,
my scenario is split into two parts:
SAP -> PI : We received a RFC (without sending a response) and split the message into single
files that we saved on PI filesystem
PI -> WS: We send the messages to a web service.
But because we read it from file system I am not quite sure how to handle this. If the
web service is not available a normal synchronous web service message is normally stopped
and can not be restarted. How can I be sure, that the message will not getting lost?
The only way I could see is the support that see the erroneous message an inform the business.
Is it possible to automate the process if the web service is not reachable?
If the web service sends an error code, I can handle this with conditions in receiver determination,
but technical problems will just stop the message, wouldn't it?
Regards
Chris

Hi,
Syncronous messages once failed in PI can not be restarted . To inform business you can use several options :
1. Use Interface specific alert so that when the particular interface fails alert will be triggered and sent to respective recipients.
2. You can also right the ABAP report which sends the emails with payload for the messages which have failed . You can also shedule this report as per your need .
Regards,
Ganesh

How is it that fonts in the Mac system can be damaged?

How is it that fonts in the Mac system can be damaged?
It does not hapen in PC systems, ever!
How do we go about replacing the damaged fonts?
I treid to delete and reinstall but no sucess.
Also, Mac systems can only have active about 250 fonts.
PC systems can have up to 1,000 fonts and run very smoothly with any hitches.
Any sloutions or recommendations?
Looks like I made a wrong choice.
I thought that Mac systems was very stable when it comes to graphic related applications, but it seems that I was WRONG.
A simple font base also Mac system cannot handle as well as a PC based system.
Sorry if I have offended other Mac users.
But, I would really like to continue using my Macbook Pro.
Cheers and Merry Christmas, everyone!!!
Kelvin LEEmy

How is it that fonts in the Mac system can be damaged?
As ds store noted. Any file on any part of the drive can be damaged at any time. This is true of any OS, not just the Mac.
It does not happen in PC systems, ever!
Why in the world would you think that's true? I used DOS/Windows for years. Fonts on PCs get damaged too, for pretty much the same reasons.
How do we go about replacing the damaged fonts?
You can replace just the fonts from your Snow Leopard installation disk. See the bottom of my article, Font Management in OS X for instructions.
I tried to delete and reinstall but no success.
Not enough info. Reinstalled from where?
Also, Mac systems can only have active about 250 fonts.
I don't know where you read or heard that, but it's 100% wrong.
PC systems can have up to 1,000 fonts and run very smoothly with any hitches.
And I've had as many as 8500 active (for testing, I would never do it day to day). Do I win?
Any solutions or recommendations?
The most likely reason, assuming you replaced the fonts with known good copies is Font Book. Put bluntly, it's one of the worst font managers available. It's database is easily corrupted. When that happens, fonts that are marked as active in its interface won't appear in some, or all apps. You'll find you can't activate or deactivate fonts. Use these steps to clean Font Book up so it works.
Restart your Mac and immediately hold down the Shift key when you hear the startup chime to boot into Safe Mode. Keep holding the Shift key until you see a progress bar towards the bottom of the screen. You can let go of the Shift key at that point.
OS X asks you to log in (you will get this screen on a Safe Mode boot even if your Mac is set to automatically log in). Let the Mac finish booting to the desktop and then restart normally. This will clear Font Book's database and the cache files of the user account you logged into in Safe Mode.
After the Mac finishes booting back to the desktop from Safe Mode, do the following to clear the rest of the font cache files.
Close all running applications. From an administrator account, open the Terminal app and enter the following command. You can also copy/paste it from here into the Terminal window:
sudo atsutil databases -remove
Terminal will then ask for your admin password. As you type, it will not show anything, so be sure to enter it correctly.
This removes all font cache files. Both for the system and the current user font cache files. After running the command, close Terminal and immediately restart your Mac.
Looks like I made a wrong choice.
As opposed to what? Dealing with viruses each and every day?
I thought that Mac systems was very stable when it comes to graphic related applications, but it seems that I was WRONG.
Boy, you sure know how to make people want to help you.
A simple font base also Mac system cannot handle as well as a PC based system.
Also flat out wrong. Fonts are simple. You add them and use them. Turn them off when you don't want them active. Learning and understanding a new OS is usually a good idea before you start trashing it.
If problems return soon after resetting Font Book with the notes above, then you most likely installed junk fonts. Free fonts are worth what you paid for them and are the number one source of such problems on both Macs and PCs.
Secondly, get rid of Font Book. If you use and manage fonts every day, get a professional manager. Suitcase Fusion 4 and FontExplorerX Pro are your best choices.
I may receive some form of compensation, financial or otherwise, from my recommendation or link.

How can I be sure that an AddOn is Running?

Dear All,
We develop a Usability Package that solve sever IT (and not only) legacy trouble. THis AddOn work fine and solve our customers problems.
But I have to be sure that some user do not close AddOn during normal Session (if they are habilitate) or for thechical trouble AddOn do not go up during start.
If user work without AddOn Up all addon data filter is not active and some problems can arrive.
How can I be sure that an AddOn is Running?
Is it possible to use Transaction Notification adding
     ADD    YOUR   CODE   HERE
DECLARE @attivi integer
select @attivi=count(*)
from master.dbo.sysprocesses with (nolock)
where db_name(dbid)=db_name() and hostname= host_name() and program_name='XXX' and blocked= 0
IF @attivi <= 0
BEGIN
    SET @error = 1122334455
    SET @error_message = N'AddOn XXX is Down.Please Restart your client'
END
This code is acceptable for SAP AddOns certification Process ??
Do you know some other and more simple/performant solution ??
Maurizio Fratini
SAI Srl

Hi David,
A correct answer, but not hit my mark.
Several our customer are medium company with more that 40 clients working. Frequently employee are chenged and new entries with no experience in SBO start to work.
The problem is that sometimes a client, also with experience, expecially if he is in a hurry to do sthg., do not read a little message from SBO. This message warn him that
for .... f.e. insufficent memory ... or timeout .... or other reason .... , an AddOns do not start and a little window appear where he can choose to "Continue without this AddOn" and
he reply with Yes.
Another process that I have to check is the new user creation. How can I sure that my customer IT Manager cusomuze the new user correclty and not forgot to set "Automatic"
the startup of this AddOn?
I thing that some Transaction Notification code rows can preserve me from my trouble.
Do you agree with me?
Just refer your consideration about contraindication .... performance, certificability, functionality,   etc ...

HT1349 we both have the same Iphone, how can we make sure that we both have different account on the same network?

my partner and i have the same models of Iphone. how can we make sure that when she logs on to our home network, it recognises her phone and doesn't down load to my phone?

Did you try to rename one of them? iTunes: How to rename your device
iTunes remembers the settings for each phone when you sync, even if both phones are called "My iPhone".
So make sure to set it up like you want to, after that iTunes will do the rest.

How to sure that our system is FIFO or LIFO

Similar Messages

Maybe you are looking for