How to sweep user personalization of POWL for OSA?

All:
We've had people personalizing their Objective Setting and Appraisal (OSA) Personal Object Work List (POWL) by creating new queries, changing existing queries, and changing settings. This is happening both in ESS and MSS. We'll be removing all of those options from the screen. However, we need to sweep the personalization they've already done. I understand this works differently than other POWLs.
How do we delete personalization done by users to the OSA POWLs for ESS and MSS?
Thank you,
Jerry

Vijay:
Thanks. Our portal team knows how to disable personalization. My concern is that people have already made changes that we need to remove. For example, users have changed queries and hidden their own list of evaluations in the overview tab. In another place, someone removed a link that we want to keep out there.
Is the ability to delete personalization that users have already done cleared by doing this activity you describe below? Is there a transaction we need to run to sweep what they have already personalized?
Thank you,
Jerry

Similar Messages

Anybody knows that how to Allowing user Customization at runtime for portle

Anybody knows that how to Allowing user Customization at runtime for portlet.
What i want is to let user Customization persist to the repository. (not session). bu tmy testing accodring the Jdev 11g guide shows not working for portlet..
Any body knows how to do this for portlet ? Web center 11g
thanks a lot.
Wayne

Hi Wayne,
You can only save runtime customizations to the repository for the users present in jazn-data.xml file (If you are using file based security).
You will have to do the following before you can start saving user customizations:
1. Create Webcenter Template project.
2. Apply ADF Security
3. Use page-definition files for jspx pages.
After this, whatever customizations you do, will be saved to persistence storage.
Better would be to try this on server. Since, before deploying, you run the pre-deployment tool, which will take the MDS Repository path as an input and store all persistence storage there.
If there is nothing in that location, you can be sure something is wrong and debug it.
Hope that was helpful.
Regards,
Kunal Chheda.

How to hide user id and password for auto login in Analyzer 6.5?

Could anyone tell me is it possible to hide the user id and password for auto login in Analyzer version 6.5 and how?Thanks in advance...

Sainath,
Referring admin guide as mentioned by Craig is good option.
Let me give you few steps that I did in one of my projects.
Open command prompt and navigate to the path "C:\Oracle\Middleware\EPMSystem11R1\products\DataRelationshipManagement\client\batch-client".. here you can see many see other utilities as well.
drm-batch-client-credentials.exe is the one used to encrypt the userid and password.
open this in command prompt and then choose the application to which you want to encrypt the password.
then remove userid and password from batch script then run it... it does what you want

How to get users' login logout time for user IDs for a specific date?

Dear All,
There is a case I being requested to retrieve the Userid, User Name,
User Group, User Dept, Date, Login Time, Logout Time in a specific date, for example, 21.05.2009.
How should I retrieve the information? The user want to input specific date and user group then return the details that mentioned above.
I try with SUIM->Users->By Logon Date and Password Change... but I can't specific the date that I want ...
I try with SM19 (Security Audit Log), but unfortunately in my system this is not activated.
I've seek for SAP's advise, and they say need to ask abaper to developr a report in order to get such details....
Do you guys have any other methods?
Do you guys know which tables will contain the details as mentioned above?
Best Regards,
Ken

Unfortunately without the audit log, you're going have a hard time finding this information. As mentioned, ST03N will give you some information. If your systems daily workload aggregation goes back to the date you require then you'll be able to get a list of all users who logged on that day. ST03N doesn't keep time stamps just response times.
My only idea is VERY labor intensive. If your DB admin can retrieve a save of the database from that day then table USR02 will hold a little more information for you. It will contain last login times for that day. If your system backup policy happened to have saved the contents of folder "/usr/sap/<SID>/<instance>/data" then you potentially have access to all the data you require. The stat file will have recorded every transaction that took place during that day. If that file is restored you could use program RSSTAT20 to query against it.
Good luck and turn on the audit log as it makes your life much easier!

How to create user-friendly MDX parameters for MS Reporting Services?

In SQL Server Reporting Service, when I connect to my cube to create a dataset, in Query Designer I create my query with a filter. It creates the following MDX for me:
SELECT NON EMPTY
KPIValue("KPI1"), KPIGoal("KPI1"), KPIStatus("KPI1")
ON COLUMNS, NON EMPTY
[Create Date].[Month Num].[Month Num].ALLMEMBERS * [Create Date].[Hierarchy].[Month].ALLMEMBERS
DIMENSION PROPERTIES MEMBER_CAPTION,
MEMBER_UNIQUE_NAME ON ROWS FROM
( SELECT
( STRTOSET(@CreateDateYear, CONSTRAINED) )
ON COLUMNS FROM [ERP])
WHERE
( IIF( STRTOSET(@CreateDateYear, CONSTRAINED).Count = 1,
STRTOSET(@CreateDateYear, CONSTRAINED),
[Create Date].[Year].currentmember ) )
CELL PROPERTIES VALUE, BACK_COLOR,
FORE_COLOR, FORMATTED_VALUE,
FORMAT_STRING, FONT_NAME, FONT_SIZE, FONT_FLAGS
When I add this dataset, Reporting Services creates a parameter named CreateDateYear. When I pass a value like "2014" to this parameter I get nothing and I have to pass a value like
[Create Date].[Year].&[2014].
How can I change my report to change this parameter for passing the value like "2014" instead of ugly and not user-friendly string
[Create Date].[Year].&[2014]?

Hi ,
Follow the below steps
1. Create a dataset with MDX as below which would return the member caption (2005,2006 etc) and member uniquename ([Date].[Calendar Year].&[2005],[Date].[Calendar
Year].&[2006] etc)
WITH MEMBER [Measures].[ParameterCaption] AS [Date].[Calendar Year].CURRENTMEMBER.MEMBER_CAPTION
MEMBER [Measures].[ParameterValue] AS [Date].[Calendar Year].CURRENTMEMBER.UNIQUENAME
SELECT {[Measures].[ParameterCaption], [Measures].[ParameterValue]} ON COLUMNS
, [Date].[Calendar Year].ALLMEMBERS ON ROWS
FROM [Adventure Works]
2. In the parameter's available values choose the above data set and set the options as
Value Field = ParameterValue
ValueCaption = ParameterCaption
In this way use will see only the years and based on the selection the respective values will be passed to the dataset as parameter.
Best Regards Sorna

How to stop user from entering value for already existing data

Hi ,
We have a situation , where we need to give user a template for entering the data and then send it to the database. But we want that if user has already entered the value for a combination, then he should not be allowed to select the same combination again in that template.
In other words , there should be write access but not update access.
So I have two questions related to it:
1. How to build report with giving user , the drop-down list of available members under each dimensions. (I know that we can provide list by writing all of them in excel and then using those values in drop-down)
2. How to restrict the user for selecting the combination which has already been selected.
Need your suggestion
Thanks
Sanjay

Hi Sanjay,
for your first question...
you can build an EVDRE in a hidden area/sheet to display all values of a desired dimension in rows. Set Option SuppressDataCol to 'Y'. Also maintain MemberSet options to display only the values you need.
Now you can reference your DD-box to the key- or description range.
With some VBA-code you can refresh this EVDRE on Workbook_Open and also set the range (attribute ListFillRange?) of you DD-box dynamically to the RowKeyRange.
Hope, it helps.
Regards
Steve

How to implement user-exit based changes for incompletion status?

Hi,
I have to implement changes to incompletion procedure using user exit. I have found the following user exit for controlling header status.
User exit in Program RV45PFZA
In this user exit you can store a specification for the reserve fields in VBUK (header status). Reserve field UVK01 could, for example, be used for an additional order status (as for rejections status, etc.).
The following workareas are available for this user exit:
VBUK (header status)
FXVBUP (item status)
FXVBUV (Incompletion)
Please help, how to implement changes to incompletion procedure using user exit?
Regards,
Chamandeep

Dear,
Go to CMOD and enter the enhacement number there. U can find the enhancement number through table MODSAP. here u can enter the enhancement object which is in ur case is Program name. Then you can use the enchacement number in CMOD and create a project and export it.
RG,
VM

How to authenticate user in Active Directory for an Oracle report

Hey there,
We have users of 1 report all over the country.
Currently, when using the report, the user chooses a location as a parameter, then runs the report.
The problem is we don't want the user to be able to see data from other locations, only their own.
So how can I do this as all users are set up in Active Directory, but the only thing that distinguishes them apart is under the Properties of the user, under the General tab, the Office field says where they are located.
Thanks in advance!

Hey there,
We have users of 1 report all over the country.
Currently, when using the report, the user chooses a location as a parameter, then runs the report.
The problem is we don't want the user to be able to see data from other locations, only their own.
So how can I do this as all users are set up in Active Directory, but the only thing that distinguishes them apart is under the Properties of the user, under the General tab, the Office field says where they are located.
Thanks in advance!

How to add user defined F4 help for s LDB field?

Hi,
I am using PNPCE Logical Database for a program using the standard HR report category. But I want to have my own restricted F4 help for a particular field.Is it possible to override the standard LDB search help? I tried doing it , but I am getting a syntax error .
Mahesh

Hi Mahesh,
I don't think so that you can attach a User defined F4 help in a standard LDB.
What I would suggest is that you copy the standard LDB into Z LDB from SE80.
Then go to the selection screen of the LDB and either try and attach a F4 help by writing the code in it OR
Hide the field where you want to attach the F4 help with the keyword Exclude(you will have to check on the exact keyword).
And add the same field in the selection screen of the report and define the F4 help.
Do not forget to attach the Z LDB to your report by going to the Attributes.
Please refer to the code below for attaching a generic F4 help to a select options:
report zrich_0001 .
data: begin of ihelp occurs 0,
field type char10,
ftext type char50,
end of ihelp.
data: a_field(20) type c.
select-options s_field for a_field.
initialization.
ihelp-field = 'A'.
ihelp-ftext = 'Description A'.
append ihelp.
ihelp-field = 'B'.
ihelp-ftext = 'Description B'.
append ihelp.
ihelp-field = 'C'.
ihelp-ftext = 'Description C'.
append ihelp.
at selection-screen on value-request for s_field-low.
call function 'F4IF_INT_TABLE_VALUE_REQUEST'
exporting
retfield = 'FIELD'
dynprofield = 'S_FIELD'
dynpprog = sy-cprog
dynpnr = sy-dynnr
value_org = 'S'
tables
value_tab = ihelp.
start-of-selection.
In case you have any further clarifications,do let me know.
Regards,
Puneet Jhari.

How to get user and system status for a trade promotion

Hi,
I have to develop a batch program to change user status and system status of all trade promotions which satisfy some criteria. This criteria checks some dates related to trade promotion(like Changed on,Pallett buying, buying horizon dates) also.
I thought of first extracting all external ids from CGPL_PROJECTS table and then run trade promotion query. But how can I get current user & system status and all dates as these can be taken from relations "TPMStatusActiveRel" and "TPMDateRel". I don't know to take data from relations. Please help me with a piece of code.
Thanks.

Hello Shikha,
You can use these relations here, as you are not in the Business Object layer anymore. As far as my understanding is, all the batch programs or reports should be done at the API layer. Try this code, to read the status of the Trade Promotion object.
data: lr_appl_base type ref to CL_CRM_MKTPL_APPL_BASE,
lt_sys_status type CGPL_ISTATUS_TEXT_T.
lr_appl_base ?= CL_CRM_MKTPL_APPL_BASE=>GET_INSTANCE().
" To read system status
call method lr_appl_base->STATUS_READ
exporting
IM_MKTELEMENT_GUID = "your Trade promotion guid
ET_TJ02T = lt_sys_status.
" To read user status
call method lr_appl_base->STATUS_READ_EXTERN
exporting
IM_MKTELEMENT_GUID = "your Trade promotion guid
ET_TJ02T = lt_sys_status1.
To change the user status, use the method STATUS_CHANGE_EXTERN of the same class
To set the system status, use the method STATUS_SET of the same class.
Hope this helps.
Regards,
Vinay

How to Design User Accounts and Groups for Human Task

Hi All,
I have a requirement wherein we have a group of people to whom tasks get assigned. Details are below
Assume
PO- Purchase Order
IN- Invoice
CL1 - Client 1
CL2 - Client 2
CL3 - Client 3
REP1 - User 1
REP2 - User 2
REP3 - User 3
APP1 - Approver 1
APP2 - Approver 2
APP3 - Approver 3
1. There are two groups of people say PO_Team and IN_Team.
2. REPx are the folks who are in the IN_Team. They handle monitor invoices and run reports on them (READ - Only)
3. APPx are the folks who are in the PO_team. They approve order and sometimes modify them (READ-WRITE)
4. CLIx are the clients each of whom send PO and expect IN in return
5. CLI1 - APP1- REP1 together handle one client.
Now the requirement is something like this
1. APP1 must be able to see the PO and IN only from CLI1
2. APP1 must be able to see editable view of PO from CLI1
3. APP1 must be able to see red only view of IN from CLI1
4. REP1 must be able to see the PO and IN only from CLI1
5. REP1 must be able to see read only view of IN from CLI1
6. REP1 must be able to see read only view of PO from CLI1
7. In exception cases APP1 can assign a PO from CLI1 to APP2
Can someone help me in the design of groups and permissions for this?
TIA

Groups are the way to go. Every Human Task can be assigned to either a user or a group or a user and a group. Select the last option so that it goes to a particular user but also to a group. That way anyone in the group can approve these tasks though it is sent to one particular users list. Anyone from that group can pick that task up and approve it

How to find User Exits/ Enhancments/ BADI's for T-code CJ20N

Hi All,
In T-code CJ20N, assume there are two fields A & B. User will input value in A, based on A value I need to fill B field. So I need to find first suitable User Exit/ Enhancment/ BADI.
Kindly help me in this regard. Pls tell me how to find User Exit/ Enhancment/ BADI for a given t-code.
Regards
Jaker.

Hi,
Check the following , this might help,
1. CNEX0037
2.CNEX0038
3.CNEX0039
Regards
Kiran Sure

Allowing user Customization at runtime for portlet

Anybody knows that how to Allowing user Customization at runtime for portlet.
What i want is to let user Customization persist to the repository. (not session). bu tmy testing accodring the Jdev 11g guide shows not working for portlet..
Any body knows how to do this for portlet ? Web center 11g
thanks a lot.
Wayne

Hi Wayne,
You can only save runtime customizations to the repository for the users present in jazn-data.xml file (If you are using file based security).
You will have to do the following before you can start saving user customizations:
1. Create Webcenter Template project.
2. Apply ADF Security
3. Use page-definition files for jspx pages.
After this, whatever customizations you do, will be saved to persistence storage.
Better would be to try this on server. Since, before deploying, you run the pre-deployment tool, which will take the MDS Repository path as an input and store all persistence storage there.
If there is nothing in that location, you can be sure something is wrong and debug it.
Hope that was helpful.
Regards,
Kunal Chheda.

How to make defalt value true for user personalization

Hi,
Specific column has default value for User personalization is false,How can i make it true.
Please suggest

Hi ,
when user personalise a page , it shows a default level,site level,organization level,responsibility level value for a columns property.
Default level is not overriden by user only other three site level,organization level,responsibility level are overriden.
User personalization property of a country code column has a false value at default level
1.How can i change it to true at default level.
2. If default level will remain as false for User personlisation property and if i change a property value to true at other level.Will it make any personalization enable,As i have already tried Second option, I am not getting a value back.

How can we do personalization at User Level

Hi ,
I have extended a controller .
and I have to replace the seeded controller to extended controller using personalization at User Level.
Can any one suggest how can we do personalization at user level.
Regards,
Krishna.

Hi,
If you have extended controller then why don't you use profile option for restricting at user level.
In controller use as following :
processRequest(...)
super.processRequest(...);
String userProfile = pageContect.getProfile("Profile option name");
if(null!= userProfile && !"".equalsIgnoreCase(userProfile.trim()) && "userRestriction".equals(userProfile.trim()))
//do your changes
follow same in processFormRequest as well.
Once it is done...replace you controller at site level. It will only work for the users for whom the profile option is set.
Regards,
Mukesh Uchaniya

How to sweep user personalization of POWL for OSA?

Similar Messages

Maybe you are looking for