How to switch back to LAN?

Bought a M10 Valet.
Connected to a desktop via LAN. Then, we switched to wireless. How to switch back to LAN cable?
Thanks.

Spoiler (Highlight to read)
Desktop has both wireless and cable capability. I was running cable direct without router or modem. Bought M10 and installed easily.
Then, I discovered that router is running wireless to desktop. WAnted to return to cable for the desktop for security reasons.
Issue: How to tell the M10 to run internet thru cable, and not wireless?
Is it possible to tell router to do that for desktop alone? Or, must I disable wireless completely?
M10 has no button or software control to switch between wireless and cable. What is that button the top of the router?

Similar Messages

  • I partitioned my Mac Book so I could have windows and now i don't know how to switch back it also doesn't tell me what I want to use when I reboot it. How do I switch back to OS X?

    I partitioned my Mac Book so I could have windows and now i don't know how to switch back it also doesn't ask me what I want to use when I reboot it. How do I switch back to OS X?

    At startuo hold down the Option key. That will bring up a boot menu screen.

  • How to switch back my apps store to Malaysia apps store (own country)?

    Can someone tell me how to switch back my apple apps store to Malaysia apps store(own country).
    I have accidentally switch it to china apps store..
    Thanks

    Try going to the bottom of the Featured tab in the App Store app on your iPad and tap on your account id, tap on 'View Apple ID' on the popup and log into your account, and then select the Country/Region section and select Malaysia.

  • Dual boot OSX and 9.2, how to switch back to OSX?

    Hi Guys,
    I am brand new to Mac. I was given this iMac Power Mac 750 600Mhz with 256MB memory and a 80G hard drive. When I got it, it boots to OS X and I don't know what I did (maybe because I plugged in a USB hard drive) but it started to boot to OS 9.2 now, and I don't know how to switch back to OS X.
    I remember, when I plugged in the USB flash key, it was running OS X, and it asked me to hold on the power button for several seconds to reboot, I followed that, and it boots to 9.2 ever since.
    How do I make it boot to OSX?
    Thanks!

    Hi Hexar,
    First of all, Welcome to the  Discussion forums and to Mac computers!
    See: "Mac OS 9, Mac OS X: Press X key during startup to select Mac OS X on single-volume installations"
    post back if you have further questions or comments,
    LS

  • How to switch back to snow leopard from mavericks

    My macbook takes forever to lauch and many applications crash when i use them.
    i need my laptop to run as fast as it used too before mavericks.
    im not a professional concerning computer so i need step by step instructions on how to switch back to snow leopard.
    Please help me !!!

    See this User Tip  >  https://discussions.apple.com/docs/DOC-6161

  • HT1918 Suddenly cannot access iTunes US store. Says that I am at a UK iTunes store. How can switch back my US account?

    Suddenly cannot access iTunes US store. Says that I am at a UK iTunes store. How can switch back my US account?

    Sign/log out of your apple account then log back in. It will then allow you to use the US store.
    Rick

  • How to switch back to old depreciation calc method during upgrade to ECC6.0

    Hi Everyone,
    We are doing a technical upgrade from 4.6C to ECC 6.0 and we have activated the enterprise extension EA-FIN via SWF5 (switch framework) to use the functionality of accrual engine, closing cockpit etc. However, activating EA-FIN has activated the new depreciation calculation method (Period based depreciation calculation) which, we do not want. We still want to continue using old depreciation method (transaction based depreciation calculation).
    So, is there a customization that turns off the new depreciation calculation? Or an OSS note? I read in SDN Wiki and it said, one has to post a customer message (OSS) to SAP and they in turn provide the notes to switch back to old depreciation method and also it is mentioned that these notes are not available in service market place. Is that how it is? Had anyone got into this issue before? Please help me in this regard.
    Thanks in advance,
    K

    You already found your answer on the Wiki:
    I read in SDN Wiki and it said, one has to post a customer message (OSS) to SAP and they in turn provide the notes to switch back to old depreciation method and also it is mentioned that these notes are not available in service market place.
    What is not clear about that?

  • I live in Spain, but am an English speaker. I tried to download some apps from the English shop, but am told I cannot do that. Now I do not know how to switch back to the Spanish store ? I can not even update my existing Apps. I went to Settings' but cann

    I tried to download some Apps from the English shop but am apparently not allowed to do that. I am prompted to switch back to the Spanish shop.
    Unfortunately I do not remember how to do that. I cannot even update my existing Apps. I cannot find anything in Settings to get back to the
    Spanish store. help!!!
    Bambi

    Settings > Stores (or iTunes and App Store) > Apple ID > View Apple ID > enter password > Country/Region

  • Boot Camp, How to switch back to Mac OS X from Windows?

    I successfully installed boot camp and Vista on my imac so I could watch netflix on my computer (other than that I have no use or patience for Vista or Windows). Now, I am in Windows Vista and am unable to switch back to Mac OS X. I have looked everywhere, including the Windows Help and Support and I can't see how to close Windows and get back to the good side.

    Open the Control Panel, click on Startup Disk, and change the setting; this item will only appear if the Boot Camp drivers are installed. Alternatively, restart the computer with the X or Option keys held down; in the second case, select the Mac OS X system, push the button with the straight arrow, and change the startup disk from System Preferences afterwards.
    (35215)

  • How to switch back to iOS 6

    I would like to know if it's possible to switch back to the iOS 6 once you have downloaded the new 7 update. If so, how?

    I'm sorry, but Apple does not provide a downgrade path for iOS. Because downgrading is unsupported by Apple we cannot discuss it on these forums, but you can use Google to find information on how to install an older version of iOS on any iDevice.

  • Safari offline. How to switch back to online?

    Hi.
    Wifi is shown as connected, however, Safari is working in offline mode (no webpage is being opened and it says 'you are not connected to the internet' on browsing). The wifi internet is working fine on other devices. I remeber in Windows we had it in the File menu (swithcing bwetween offline and on
    Ine modes).
    How to switch it back to Online Mode in Safari?
    Thanks for help.

    Shutdown the computer.
    Power off the router. Wait a while.
    Power on the router. Wait until all the lights are lit up properly.
    Startup the computer and try the Internet.
    Best.

  • HT203167 How to switch back to the Australian Apps Store?

    Somehow my iphone account is connected to the Canadian Apps store.
    How can I switch back to the Australian Store? That is where I have my account.
    Thanks for any help.

    Go to settings/iTunes & App Store then tap on Apple ID and then view account and change region

  • How can switching back to a previous phone be considered an upgrade?

    I had been using an S4 for about a year when I got a hold of a lumia 928 and wanted to try it out was using while waiting for the 8.1 update when I broke the phone beyond repair .I go to switch back to my S4 and get the message that my phone is not compatible with my current plan (unlimited Data) how can that be as this is the phone I had been using on the plan originally. Call customer service lady tells me she can take care of it I switched phones and everything is back to the way it was before except not I get a message telling me i'm now on a 2gb data plan. Another call to customer service to be told that I upgraded my phone and I had to be moved to a new data plan. How is this considered an upgrade?

    They probably coded it incorrectly.  Get them to code it as ce customer equipment and put the 29.99 feature back on. If they say it's not available request an inactive pricing request put in as you have 14 days to get unlimited feature when there's this type of error.

  • How to switch back and forth from mac to windows????

    for some reason, i'm unable to switch back and forth from windows to mac right now. i rarely shut down my mac, but did today and when it restarted, it naturally restarted in windows. i then held down the keys i thought i was supposed to and restarted it, but don't have the option of getting back into my mac side. what keys am i supposed to hold down while restarting the computer?? i feel like the mac side is being held hostage! i thought it was ctrl & the apple key that i was to hold down at the same time. anyone? anyone??

    Hi and welcome to Discussion,
    to 'release the hostage' you have to hold down the 'Option/Alt'-key during restart and are then greeted by a Boot-Menu from which you can choose which one to boot.
    Once in OSX you might want to go to System Preferences - Startup Volume and choose OSX as the default.
    After the needed restart OSX boots up automatically unless you again use the Option-key to choose Windows.
    Regards
    Stefan

  • Random crashes after upgrade; how to switch back to previous version Firefox

    First of all Firefox upgraded itself without asking, even though I did not give any approval or command to go ahead. Since my HW is a bit older, I do not want to go for any SW upgrades of my infrastructure SW, except essential tools for my work. 99% of time upgraded SW will need/ use up more resources and slow down the performance while providing "NEW" features or enhancements which I may not even want unless I upgrade my HW. Now I am prone to more crashes when I have scores of tabs in 3 or 4 windows, which is normal for my concurrent processing mind; as often my searches result in things that I cannot finish reading/followup in a day. Although I do bookmark a lot too, but one has to remember to do it; whereas a Tab is open there to REMIND me to read or followup.
    Secondly, Then there is no easily visible way or button to switch back to the "previous" version of Firefox; i.e. to undo the Upgrade. Very disappointing and frustrating !! What happened to customer-oriented thinking ?
    Adobe behaves better, I have been saying NO to its upgrade question a zillion times, without unchecking "Remind Later" box. And it did not upgrade automatically in last 2 yrs. Only when I pressed ENTER with its button in focus, did it go ahead and upgrade itself (even that was unwittingly done, but at least it WAS my action).
    S. Jalali

    Go to Tools>Advanced>Firefox updates - and check as you wish for the future.
    Going back to an earlier version is never a good idea for security reasons.

Maybe you are looking for

  • Generate PDF file from a report using greek characters

    Dear all, I tried to generate a PDF file from a Report having greek characters on it.While in previewer I could see everything OK, when PDF file was generated all greek characters had been substituted by symbols... Any ideas, suggestions and workarou

  • Error in Message Monitoring

    Hello, When I enter to "Runtime Workbench" -> Message Monitoring, I choose: is.<instance_number>.<server_name> and press "display" button, then I get an error:   "Unknown error: javax.ejb.CreateException: getJCOCLient   (String,String)" When I choose

  • Save as TIFF file

    Trying to save a still from a QT video file video plays OK and I can save a still but whatever settings I make in options it only saves as a pct file is it possible to save as other file types such as TIFF?

  • Regarding dynamic height of secondary window in smartform.

    Hi, I have a secondary window just above the main window in my form. Depending upon the number of records the height of seconday window needs to be adjusted .i.e. it has to be dynamic. Only after the end of secondary window the main window should be

  • Visual Cafe and Oracle thin driver

    I have created a java applet using visual cafe and oracle think driver. The applet connects to database within the visual cafe environment. If I try launching applet locally within a browser I get the following error "Error:securit. Couldn't connect