How to switch between messages in the BlackBerry Hub

With the release of BlackBerry 10 version 10.1, we’ve added a new gesture to the BlackBerry Hub that allows you to quickly switch between your next and previous messages. It’s simple: while viewing a message drag your finger from the left to the right and in one continuous motion swipe up or down.
For example, in the following screenshot you’ll notice I am viewing ‘Test 08”. To get to the next message, “Test 09”, all I need to do is swipe from left to right (red arrow) followed by swiping up (green arrow) in a single motion. To switch to the previous message, “Test 07”, I complete the same gesture, but swipe down instead (blue arrow).
Tip: Using a BlackBerry Q10 or Q5? On top of using this gesture to switch between messages, you also have the option of pressing the N key to view your next message, or the P key to view a previous message.
If this gesture doesn’t appear to be working on your device, verify you are using BlackBerry 10.1.0.4181 or later by going to Settings > About and reviewing the OS Version field. If the OS Version is lower than 10.1.0.4181, check for updates by going to Settings > Software Updates.
For more details about the availability of BlackBerry 10.1, check out Inside BlackBerry’s post on BlackBerry 10 Software Updates.
VIA | helpblog.blackberry.com
http://helpblog.blackberry.com/2013/10/how-to-switch-between-messages-in-the-blackberry-hub/
Please thank those who help you by clicking the button.
If your issue has been solved, please resolve it by marking "Accept as Solution"

I would set up a variable before you get to that node, lets call it $EmpID and assign to it the value of the prompt you want to play lets say 12345 which would be the library promptID. It will then play prompt, get digits, and once you validate if it goes through the expression that flags it as invalid, in that node re-declare the variable, but this time give it the value of the new prompt you want to play, then sent it back to the node which will then play the new prompt and collect the digits.

Similar Messages

  • Does anyone know how to view Tagged messages from the Blackberry??

    As most of you Tagged is another site pretty much like Myspace. I can get my emails letting me know that I have a Tagged message, I can even see the images of the person sending them. However, when I go to the Tagged site it says its loading but the messages never download. Thanks in advance.

    unfortunatly i dont think there a silution unless they make a none flash version or moblie version after reading the following ....
    "All of their messages and friend adds and all that is done in Flash, so it won't load/come up anyway because the BB Curve can't support Flash.  So, I guess it's all for naught."

  • HT1343 how do I switch between windows in the same programme?  I know that I can use Command tab, however this takes you through all of the programmes that I'm using. What I need to do is have a shortcut to switch between windows in the same programme.

    how do I switch between windows in the same programme?  I know that I can use Command tab, however this takes you through all of the programmes that I'm using. What I need to do is have a shortcut to switch between windows in the same programme.  For example if I'm in Excel and have 5 windows open I want to be able to scroll between each window of Excel only with a shortcut.
    Please help!

    Command and ~ keys to tab between open windows.
    Technically it is the Grave Accent ` (aka reverse quote) under the tilda ~ key.  Tilda ~ is shifted, and Grave Accent ` is not.
    Command-Grave Accent

  • How to switch between 2 windows of the same application using Cmd+Tab

    Hi,
    I am using my mac now since about 10 months. I was used to work with Linux and Windows XP.
    Something I am badly missing on mac os x is the possibility to switch between 2 windows of the same application using cmd + tab just like it simply works for Linux and Windows (and maybe many other OS out there!).
    Very often I have 2 text files open in 2 editor windows (e.g. TextEdit) and need to copy and paste text from one window to the other. I was used to simply use ALT+TAB. But here I have to get my right hand away from the keyboard and use the mouse to change the focus from one window to the other and then use the mouse again to get the focus back to the previous TextEdit windows.
    THIS REALLY *****!!!! It makes me crazy. I cannot believe that such a "modern" OP does not support this action. I must be doing something completely wrong or did not understand the mac correctly. Right?
    Does anyone have an idea how I can get mac to do something all other operating systems so easily do?
    Thanks
    Quartz84

    Hi Kappy,
    well what you are saying is obvious to me. This is not the point for me and not what I wanted to know. But I think you answered my question anyway: OS X is unable to switch between windows of the same application as I mentioned in my example.
    WHY NOT???
    Every other OS is able to differentiate between windows and not just applications.
    Another example: The Mail application and an Email editor window. When you are writing an Email and you want to switch to the main window of the Mail application to read something you must again use the mouse!
    I mean Apple seems to be "somehow" using FreeBSD in the background and even in FreeBSD's window manager it is possible to switch between windows of the same application.
    Well, in the Apple world it is always the pour user who is not intelligent enough to understand Apple's philosophy ;-(
    To me this is not modern, it is simply a weakness of the OS.
    Cheers
    Quartz84

  • MSI R9 290 How to switch between Gaming Modes?

    Hi, I just got a MSI R9 290... with Afterburner installed. This card has 3 preset modes that are supposed to be easy to switch between OC Mode 1007Mhz, Gaming 974Mhz, Silent 947Mhz... How do I switch between modes? I just tried to up the MHz in Afterburner and must have done something wrong, becuase I froze everything instalntly and had to reboot. Can someone please advise me how to switch between these modes? Do I have the right software installed, Afterburner or is there another suite specificly for this card? I did not install the card, and sorry I am a noob when it comes to OC. . . Noob to gaming in general, but I am getting some pretty bogus 30FPS on a 2012 game, LA Noire, which shouldnt even be demanding for t

    Quote from: kris.meaney on 07-March-15, 18:45:04
    This card has 3 preset modes that are supposed to be easy to switch between OC Mode 1007Mhz, Gaming 974Mhz, Silent 947Mhz... How do I switch between modes?
    You need the Gaming APP for switching (not Afterburner): http://download.msi.com/uti_exe/gamingApp.zip
    Afterburner is for manual overclocking (for advanced users) if not using the modes.

  • How to switch between markets in AppStore?

    How to switch between markets in AppStore? It says that I cannt buy in Russian market because my account registered in other

    Follow the directions here:
    http://support.apple.com/kb/ht1311

  • AS: how to switch between screen modes?

    hi @ all,
    does anybody know how to switch between the 4 screen modes in ps cs3?
    - standard
    - maximized
    - full screen with menubar
    - full screen
    I looked around but could not find anything discribing a way doing this by applescript.
    the only thread I found
    http://www.adobeforums.com/webx/.3bc85cba/0
    refers to javascript but I was not able to adopt it.
    thanks for any help
    Claus

    To do it with AS only, you need to simulate the "f" key with System Events:
    tell application "System Events"
      tell process "Adobe Photoshop CS3" to keystroke "f"
    end tell
    That will loop thought the screen modes as if you did it manually.
    To run the JS from the other thread, you need to use the "do javascript" command. Remember to escape all the quotes in the JS:
    tell application "Adobe Photoshop CS3"
      do javascript "var screenModeOptions = new Array(4);
         screenModeOptions[0] = \"screenModeStandard\";
         screenModeOptions[1] = \"screenModeMaximized\";
         screenModeOptions[2] = \"screenModeFullScreenWithMenubar\";
         screenModeOptions[3] = \"screenModeFullScreen\";
         applyScreenMode(screenModeOptions[0]);
         function applyScreenMode(mode){
          var desc = new ActionDescriptor();
          var ref = new ActionReference();
          var menuID = stringIDToTypeID( mode );
          ref.putEnumerated( charIDToTypeID( \"Mn  \" ), charIDToTypeID( \"MnIt\" ), menuID );
          desc.putReference( charIDToTypeID( \"null\" ), ref) ;
          executeAction( charIDToTypeID( \"slct\" ), desc, DialogModes.NO );
    end tell
    The JS is the better solution if you wanted to skip directly to the desired screen mode without looping through the others.
    Carl.

  • How to give error message for the screen element text field when wrong i/p

    How to give error message for the screen element text field when wrong i/p
    when wrong input given
    eg. 
    I have a text box with SBOOK-CARRID
    so when user give wrong entry in text box i.e LG
    then I should give some error stating that the the input is invalid or not available ,
    now it showing the error of standard messages,
    i want manual message to be displayed when error comes.
    Thank you,
    Regards,
    Jagrut Bharatkumar Shukla

    Hi all,
    Thank you for your valuable reply,
    but the thing is that its a screen field,
    i.e text box not a selection screen
    i created in screen layout
    with name sbook-carrid
    now i want to get error message display if wrong i/p is given
    thank you.
    Regards,
    Jagrut bharatkumar Shukla,

  • How to add log messages in the sever/webui objects?

    Hi,
    I am new to the OA Framework.
    Can any one share any information in how to add log messages in the sever/webui objects?
    What are the beans I need to use to show in the diagnostic page?
    Can I get sample code for this log staments?
    Thanks in advance,
    Padma

    Hello. This forum is for reporting problems with the published Oracle documentation. You have a better change of getting a reply if you post your question on the Database - General forum.
    Regards,
    Diana

  • TS2776 How to switch wifi on and the wifi address N/A?

    How to switch wifi on and the wifi address N/A iPhone 4s?

    LabVIEW 2013 has inbuilt Plot Visible selection in Plot Legand in Waveform Graph

  • Question How to switch between tabs automatically? for example every 30 seconds

    Question
    How to switch between tabs automatically? for example every 30 seconds

    Tab Mix Plus has that feature.
    *Tab Mix Plus: https://addons.mozilla.org/firefox/addon/tab-mix-plus/

  • How to check Debug messages in the server

    Hi All,
    I am working on extensions and in my java controller file i have certain System.out.println messages. I would like to know how to check these messages from the server for debugging purpose.
    Kindly help me in the same.
    Thanks
    Deeksha

    11i - log file location - $APACHE_TOP/Jserv/logs/jserv.log
    r12 - log file location - $INST_TOP/logs/ora/10.1.3/opmn/oacore_default_group_1/oacorestd.out
    You can prepend your SOP with some text and search for the text in the log files.

  • How to switch between 2 Parent Tab Sets main and main2

    Hi,
    I have the following structure:
    Parent-Tab-Set: main
    Parent-Tab : Parent 1
    Child-Tab : Child 1
    Parent-Tab : Parent 2
    Child-Tab : Child 2
    Parent-Tab-Set: main2
    Parent-Tab : Parent 3
    Child-Tab : Child 3
    Parent-Tab : Parent 4
    Child-Tab : Child 4
    Now I want to create a new Parent Tab in main, but always creates it in main2
    My goal:
    Parent-Tab-Set: main
    Parent-Tab : Parent 1
    Child-Tab : Child 1
    Parent-Tab : Parent 2
    Child-Tab : Child 2
    Parent-Tab : Parent 5
    Child-Tab : Child 5
    Who understand this Tab-Thing... ;)
    Thanks, Juergen

    Hi Kappy,
    well what you are saying is obvious to me. This is not the point for me and not what I wanted to know. But I think you answered my question anyway: OS X is unable to switch between windows of the same application as I mentioned in my example.
    WHY NOT???
    Every other OS is able to differentiate between windows and not just applications.
    Another example: The Mail application and an Email editor window. When you are writing an Email and you want to switch to the main window of the Mail application to read something you must again use the mouse!
    I mean Apple seems to be "somehow" using FreeBSD in the background and even in FreeBSD's window manager it is possible to switch between windows of the same application.
    Well, in the Apple world it is always the pour user who is not intelligent enough to understand Apple's philosophy ;-(
    To me this is not modern, it is simply a weakness of the OS.
    Cheers
    Quartz84

  • How do you add footers in the BlackBerry Curve 8530?

    I'm actually asking on behalf of my employer.  I wanted to know how to add/create footers using the BlackBerry Curve 8530 model series.
    Thank you in advance for your help!
    Solved!
    Go to Solution.

    I don't know what footers are.
    I know what an email signature line is.
    For example, each email you write would have automatically added to the end:
    "Thanks,
    Bob Smith
    Smith Corporation
    111-222-3333 phone"
    That?
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • When switching between user accounts, the background desktop picture disappears and goes to just a blue background. Whats up with that?

    When switching between user accounts, the background desktop picture disappears and goes to just a blue background. Whats up with that?

    All fixed! It was TeamViewer that was causing the problem.

Maybe you are looking for

  • Sumif or something like it

    Post Author: Steve1040 CA Forum: Formula I have 2 fields Availability and responsetime I'm trying to calculate average responsetime for an application while the application is available. So if Availability = 0.00 I don't want to include this in my su

  • How to send a Mail purchase order automaticaly from ME22N

    How to send a Mail purchase order automaticaly from ME22N

  • Error using edit in Photoshop Elements 8

    When I click on the edit button I get the following error. Searched the forum and found no answers. Any one have any suggestions?  I did reboot and tried again. Thanks

  • Help please! I've lost my desktop!?!

    Hi, I bought my Macbook about 3 weeks ago and so far its been going great. Today I stupidly renamed one of the icons in the folder sidebar window (the one with the little house) and now my desktop has changed to back to the original basic blue! I've

  • MX and Spark Rotate effects in Flex 4.5

    I'm porting an application from Flex 3.1 to 4.5 and having following problems with the Rotate effect: 1. I want to keep using mx.effects.Move, but the originX and originY properties of mx.effects.Rotate in 4.5 do not work correctly. It seems no effec