How to switch between primary and secondary langua...

Hi guys,
I've got an e52 but the only way to type in sec. Language while writing a message is:
Option-> Input Options-> writing language-> primary writing language (which must be changed to new one)
so there is no use of second. lang. or at least I don't know how to switch quickly between primary and second language without going that path.
ANY HELP WOULD BE APPRECIATE.
Aram

HI Everyone,
not sure if this helps. My solution is more fo Singpore users.
As i text between English and Chinese, I was unable to set my Secondary language to Chinese as there is no option to do so in the Writing language menu.
By discovery, i first set my Primay language as Chinese. Then further down the Language menu there is this option Default input. Click on that and select the default using Text case and select Ok.
When writing sms, you can switch between this 2 languages using the # key.
Hope it helps.
Have a pleasant day.
Aram_ocp wrote:
Hi guys,
I've got an e52 but the only way to type in sec. Language while writing a message is:
Option-> Input Options-> writing language-> primary writing language (which must be changed to new one)
so there is no use of second. lang. or at least I don't know how to switch quickly between primary and second language without going that path.
ANY HELP WOULD BE APPRECIATE.
Aram

Similar Messages

  • How to switch between primary and secondary input ...

    Hey guys ,
    I have Nokia 6700 Slide
    I have to write SMS's in two languages so I need to switch between secondary and primary input language put the way I know is boring and inefficient so that if anybody know a shortcut that help to switch between the primary and the secondary input language that will be awesome  .
    thanks

      when writing text ,To change the
    writing language, select Options >
    Input options > Writing language
    or refer to page 28
    http://www.google.ie/url?sa=t&source=web&cd=2&ved=0CB8QFjAB&url=http%3A%2F%2Fnds1.nokia.com%2Ffiles%...
    If  i have helped at all a click on the white star below would be nice thanks.
    Now using the Lumia 1520

  • Windows 8.1 screen bounces between primary and secondary monitors

    I have a Lenovo T530 laptop with a docking station and a IBM monitor L200P attached to it.
    Up until yesterday, this configuration was running Windows 8 Pro with no issues.
    However today, after I installed the Windows 8.1 upgrade, I started having problems with the screen bouncing between the primary and secondary monitors without my intervention. The problem happens very regularly, regardless of whether I have selected the laptop as primary monitor or the IBM monitor attached to the docking station.
    I verified that the problem does not happen with Windows 7 and Windows 8 installation and only starts appearing after the Windows 8.1 upgrade is applied.
    Does anybody have similar problems
    Thank you in advance.

    O''philipp [[#answer-697652|said]]''
    <blockquote>
    another thing you could try is this: enter '''about:config''' into the firefox address bar (confirm the info message in case it shows up) & search for the preference named '''layout.css.devPixelsPerPx'''.
    double-click it and change its value to '''1.2''' (or any other zoom factor that fits your purpose: 1.0 relates to 100%, 1.2 equals 120% and so on; -1.0 is the default value and will adhere to the system settings).
    </blockquote>
    Okay, I tried it, set it to 1.2 and even more stuff got blurry and fuzzy. Besides everything in the FF menu bar everything in the header on youtube and a few other pages did it too. It did make the pages fill the actual page better, but the blur is worse than this prob so I set it back to -1.0.
    Any other ideas?

  • Exchange rate variances between Primary and Secondary Ledger

    We have a little problem on our hands.....we are implementing dual ledgers with dynamic posting, primary in Canadian Dollar and secondary in USD.
    Exchange rate variances would occur if for example, we consider material transactions at different points in time. We would have no problems in the primary. However, CAD to USD exchange rates are updated monthly and very likely, rates would change month to month. Therefore, exchange rate variances would happen frequently in the secondary ledger.
    We have been asked by senior management how these variances would be handled by EBS. Just wondering if you have ideas though we are looking into the accounting events in SLA.
    Thanks,
    Sanjib

    If the requirement was to maintain balance in USD and Canadian dollar, You can use the Reporting currency option instead of Secondary ledger.
    Regards,
    Chirag

  • Forms 10G - How to switch between Arabic and english languages.

    Hi
    We have a bilingual ( ENGLISH , ARABIC) form .Some of the text feilds are to be
    filled in english and some in arabic . In forms 6i
    the switching from LTR and RTL worked fine .We used the feild properties and
    direction and language would suffice to get the required behaviour of forms.
    Now in forms 10g since they work in a browser its not getting the desired
    effect of changing direction in arabic feilds the cursor blinks at the right
    side of the feild but still the language is english .
    What am i missing here to have the feild in the form type in arabic .
    PS numbers work fine .Its only the language text ie the script of the language

    You can't switch languages in OS X programs, just in the OS itself. Insert the Leopard OS X disc, and choose your new preferred language when prompted.

  • Switching between Primary and Standby database

    Hi,
    I managed to setup a standby database that is updated by the primary db either when doing a log file switch or when changing the role of the primary db to standby.
    Now I want to put the standby database (that was in primary role for a short period) back into its standby role. I entered
    "Alter database commit to switchover to physical standby with session shutdown;"
    The archived redo logs as well as the control file are updated on the primary database (which was in standby role for the same short period). When I enter
    "Alter database commit to switchover to primary" I am receiving the following error message:
    SQL> alter database commit to switchover to primary;
    alter database commit to switchover to primary
    ERROR at line 1:
    ORA-16139: media recovery required
    After issuing the recovery statement I get this message:
    SQL> recover database
    ORA-00283: recovery session canceled due to errors
    ORA-01610: recovery using the BACKUP CONTROLFILE option must be done
    At the same time this log entry is written into the alert log:
    Database not available for switchover
    End-Of-REDO archived log file has been received
    Archived log files detected beyond End-Of-REDO
    Incomplete recovery SCN:0:962365 archive SCN:0:977340
    Switchover: Media recovery required - standby not in limbo
    ORA-16139 signalled during: alter database commit to switchover to primary...
    But when I try to use the BACKUP CONTROLFILE statement during recovery I get this error message:
    SQL> recover database using backup controlfile;
    ORA-00283: recovery session canceled due to errors
    ORA-01666: control file is for a standby database
    Although being quite a newbie it's obvious that the primary database (which was standby for a short period) is worried that there are older archived redo logs than online logs. I guess this happens because of the log_archive_dest definition on the standby database :
    *.LOG_ARCHIVE_DEST_3='SERVICE=ORAMPPRD REOPEN=60 MAX_FAILURE=3 LGWR SYNC
    VALID_FOR=(ONLINE_LOGFILES,PRIMARY_ROLE) DB_UNIQUE_NAME=ORAMPPRD'
    Changes are applied immediately and only written to the archive.
    But how can it be managed that the online redo logs on the primary system are also updated when switching back from standby ???
    Thanks,
    Philipp.

    Thanks, it's working now.
    I think it's important to explizitely follow the steps to switchover standby and primary for it to work. I maybe shutdown the standby to early.
    Cheers,
    Philipp.

  • Apple TV -- going back and forth between primary and secondary library

    If have a good deal of music and pictures in the primary library of Apple TV, is there any reason why can't for a while switch to streaming additional pictures and photos from iTunes? Does the process involved in doing this act to delete materials in primary library? Understand that can't do both at once.
    Thanks.

    (Please excuse my unsupported nomenclature)
    A primary library will both sync and stream (with the exception of photos which have to be streamed). Anything in your primary library which you have not opted to sync will automatically stream, unless you have instructed it not to do so. Any content which is currently synced, which is subsequently unchecked for syncing will then be streamed.
    See This

  • Display keeps switching between primary and clone.. I think.

    My laptop, Pavilion DM3, keeps switching displays by the screen blacking out yet the computer still running.  If a video is playing for example I can still hear the audio but the screen goes black.  Some little musical tone plays when it switches and sometimes I get a little notification box that pops up saying the optimal resolution for clone display is... or it will say the optimal resolution for the primary is...
    It's incredibly frustrating.  Sometimes it only happens once every few minutes and sometimes it happens once every few seconds.  I usually press ctrl+alt+f3 which works but it's annoying to have to keep doing it.  I took it to Best Buy and they reinstalled the drivers and said that should work and if it doesnt then the next step is to ship it off to HP and that could take weeks.  The problem is I'm currently in grad school and this is my only computer.  I can't go weeks without my laptop even if it means having my screen black out every few seconds.  Hopefully it really is just a setting or something or a software thing that I can fix myself with the help of you fine people.
    My laptop is an HP Pavilion dm3 with Windows 7 64bit.  Intel Pentium processer U5400.  Optimal resoolution is 1366x768.  Graphics is Intel HD Graphics(integrated I believe?)  4 GB memory, 500GB hard drive.  I've had the laptop may six weeks and it's been having the issues for about two weeks.

    Hi juniorkk,
    I can understand your frustration with the screen issue and I will be happy to help. What version of operating system are you using? What is the product number for your computer? Are you using this with two monitors as well?
    Find your product on a notebook:
    http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&dlc=en&docname=c00033108
    Finding your OS:
    http://windows.microsoft.com/en-CA/windows/which-operating-system
    Thank you,
    Please click “Accept as Solution ” if you feel my post solved your issue.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Thank you,
    BHK6
    I work on behalf of HP

  • Magic Mouse Primary and Secondary Clicks Switched

    Recently I picked up a Magic Mouse and have since found some very strange things that I don't know how to fix:
    The primary and secondary clicks are switched. As in, under mouse settings when I select the secondary click to be on the right, only the primary click works on the right side and everything else is a secondary click. It is also very annoying because every time I have more than one finger touching the surface it counts as a secondary click. If anyone knows how to fix this I would really appreciate feedback.
    I looked around in settings and couldn't find anything regarding this matter. I fiddled with some stuff but never got it working properly.
    Feedback much appreciated!
    --Justin

    Looking at another thread in this forum, I see some people who had older apple mice installed before the magic mouse are having this problem with the magic mouse.
    I had an older wireless mouse that would take right-clicks before I set up the magic mouse. Unfortunately when I connect the older wireless mouse I can no longer access it's preferences. It only gives me the preferences a generic one button mouse. Somewhere there must be some set of files I can delete and it will forget this old mouse.
    I am pretty disheartened after a week of this. One of the benefits to a mac is that I shouldn't have to dig around removing drivers and such

  • A540 How do I switch between HDMI and PC inputs?

    When I have an HDMI source plugged into the A540, I haven't been able to figure out how to switch between HDMI and PC inputs. How is this accomplished?

    You can browse the other store but unless you have a credit card and billing address in the other country you will not be able to purchase.
    All prices are in the local currency of that country that you are browsing.
    MJ

  • Is it possible to set primary and secondary display with 2 graphics cards?

    I have an Early 2008 Mac Pro with two graphics cards and four monitors installed. Does anyone know how the computer (or more specifically Keynote) determines which is the primary display and which is the secondary?
    Also is there any way to change the scheme?
    What I am trying to do is switch the primary and secondary from the two monitors in my office to the monitor at the podium (would like it to become primary) and a vga projector (would like it to become secondary)
    I bought the second graphics card so I wouldn't have to switch the cables back and forth three times a week. All the monitors work fine, it's just a matter of determining or changing primary/secondary
    Thanks in advance

    Thanks Malcolm
    I got that far – The keynote manual says that the display with the menu bar is the primary display – that works out fine. The problem is that the manual says that the display without the menu bar is the secondary (or alternate). But there are three displays without the menu bar.
    What I would like to find out is: is there a way to choose the display without the menu bar to be the alternate?
    When I try various combinations, there seems to be no rhyme or reason as to which display is the alternate.
    Thanks again for your response!

  • When frequently switching between mobile and desktop view

    When I frequently switching between mobile and desktop view I have to open the layers every time since they get closed/collapsed. Adobe may need to fix it for the next version.

    You can use CTRL+# to switch between Code and Design View.
    By the way, this is the Dreamweaver Application Development forum which deals with questions about using server-side scripting languages like PHP or ColdFusion. General Dreamweaver questions should be posted in the regular Dreamweaver General Discussions forum.
    And while I´m at it: please use descriptive headlines such as "how to switch between Code and Design View" for your posts -- mentioning your screen name "Goula129" is not helpful to other users.

  • How to bind the Zero line between a primary and secondary Y axis?

    All -
    We are using combination charts with:
    - primary and secondary Y axis (Sales versus Volume).
    - Scale: Auto (Y) Axis
    - Linear
    - Fixed Label Size
    In instances where one axis has a negative value and the value ranges are diverse the Zero line will be different for both. This causes some confusion when trying to read. Other that putting in manual (Y) axis with min and max, is there a way to force the chart to keep the same Zero line?
    Thanks!

    KOENIG Yvan wrote:
    It's quite a basic requirement for a spreadsheet program
    It's your point of view. It seems that it's not the designers's one
    Obviously, true
    The number of different features described once as "a basic requirement" is really amazing but a feature asked once is perhaps not one which must be added to a program like Numbers.
    Other tools are available for professional numbers crunchers .
    I know there are other threads asking about secondary axes, but your point is taken. I'm definitely not a number cruncher, but I am/was a pretty advanced Excel user.
    _Go to "Provide Numbers Feedback" in the "Numbers" menu_, describe what you wish.
    Then, cross your fingers, and wait _at least_ for iWork'09
    Thanks for that, I didn't quite know where to go for the feedback - provided and fingers crossed.
    Cheers!

  • How to quickly switch between straight and curly quotes?

    I've recently moved from a Windows XP machine with MS Office to a Mac Pro with Pages.
    For the kinds of documents I typically work on, sometimes I need to have straight quotes, and sometimes curly quotes. With MS Word, I was able to create a couple of macros that would switch these preferences for me. With these macros linked to an icon in the toolbar, switching between straight and curly quotes was as easy as clicking a button.
    Now I'm looking for a way to do this -- or something like it -- with Pages.
    I know how to switch back and forth using the preferences menu, of course, but I'm looking for something quicker and simpler, since I often have to make this change several times a day.
    Can Automator do something like this? Or is there another way?
    -- Eric

    Turn off the auto correction and you can type Curly quotes with:
    left single ‘ option ]
    right single ’ option shift ]
    left double “ option [
    right double ” option shift [
    If you want the French quotes « and » they are option and option shift |
    Peter

  • I have the kindle app on my I pad.   How do I eliminate books I've already read?  On a regular kindle, you can switch between cloud and device but I am not getting that option.  Thanks

    I have the Kindle app on my I pad
    I want to eliminate the books I've already read (I have a LOT).
    On the regular kindle you can switch between cloud and device but that is not working on my I pad.
    HELP.
    Thanks

    The Kindle app has a menu on the very bottom center of the screen that allows you to switch from a device and cloud view. To remove a title from the device, tap and hold on it. a pop menu will apear that allows to add the title to a collection, remove it from the device, or download it from the cloud (depending on its current status).

Maybe you are looking for