How to switch display to use only AMD graphic card on Lenovo G470

Hi, seems like there are 2 graphic cards on my Lenovo G470, 1 internal & 1 AMD HD6370. Does anyone knows how to change the option so the laptop always use only AMD graphic card?
Thanks!

hi childs,
is there any graphic card switch button? also, have you tried to disable/activate the graphic card in bios?

Similar Messages

  • How to switch multiple relays using PCI 6601 DAQ card

    What is the specification of the digital output value given from the PCI 6601 DAQ card?How to develop LAB VIEW code to switch a relay?Can anybody please explain?

    Hi hasi,
    did you read the manual and the specs of the PCI6601? It says: "5V TTL/CMOS compatible"...
    You shouldn't expect to much current from a simple DO pin - probably it's not enough to drive your relay!
    Best regards,
    GerdW
    CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
    Kudos are welcome

  • AMD graphic card not working

    Hello,
    first sorry for my english,
    second here are my specifications:
    Intel i5 2430m 2,4 GHz
    8 GB RAM
    SSD Samsung 850 EVO 250 GB and HDD Seagate 750 GB
    AMD Radeon hd 6490m
    Here is the problem:
    two weeks ago i bought new ssd Samsung 850 EVO and HDD caddy. I switched original hdd to caddy and ssd to the place where hdd was before. I installed windows 7 Ultimate 64 bit to ssd, i istalled the latest drivers, but i have problems with AMD graphic driver.
    When i start, for exp. Battlefield 3, windows crash and i get blue screen with note, that i have low IOH (NB) voltage (code 0x116). But when i uninstall driver for AMD and run the game on Intel HD 3000 graphic it runs perfectly.
    Is it posible, that extra disc need power for working and use the power, which is used for AMD graphic card and that causes AMD for not working?
    Sometimes i dont get blue screen, but i get note from windows: AMD driver stopped working and has been recovered Now i am using only intel graphics
    Greets

    Hi: See if this one works...it has a different file number and is from the dv4-3200tx which has basically the same hardware as yours does. This package provides the AMD High-Definition (HD) Graphics Driver and Catalyst Control Center for supported notebook models that are running a supported operating system. For notebooks with switchable graphics modes, this package includes drivers for both graphics processing units (GPUs). Switchable graphics enable users to switch between a power-saving graphics mode (normally used under battery power) and a high-performance graphics mode. If high-definition multimedia interface (HDMI) video output is supported, this package also installs the HDMI Audio Driver. File name: sp52929.exe

  • How to check does my notebook use integrated or AMD graphic card?

    How to check does my notebook use integrated or AMD graphic card? Some games show me that they use integrated card: http://img849.imageshack.us/img849/4125/98ab1c28dc9f4b51b537435.png ?
    This question was solved.
    View Solution.

    Hello,
    First click in Start Menu, Control Painel in the up right side click in Category and left in Small Icons.
    Search Device Manager.
    Display Adapters.
    Which is your Operation System ?
    Windows 7?
    If yes.
    Click with the right clickpad in the desktop and select Display.
    Screen Resolution you can see how graphic your used or change if you want to.
    Att Cristian
    If this answer help you click in Kudos to tanks.
    Tanks
    If this answer help you click in Kudos to tanks.
    If you don't have more question click in Accept as Solution to close this case.
    Best Regards Cristian Derick.
    Senior Support Analyst.

  • How do I use the secondary graphics card on a mac book pro with retina display?

    I know that this is kind of a stupid question but I am new to dual graphics cards and this is the first mac that I have ever had, so I don't understand how you use the 2nd graphics card. When I click on the apple logo and go to about it shows the Intel Graphics HD 4000, but I know that they put an Nvida in here to so how do I access that? Because it has a lot more graphic power than the intel does.

    Try opening iPhoto and then consulting the More Info... item. That app will cause an autoswitch to the big GPU.
    Same will happen with any other app that requires that kind of display driving power.

  • How to disable 'display pdf (using Acrobat Pro X) in browser'?  Note:  The option is unavailable to un-check box.

    How to disable 'display pdf (using Acrobat Pro X) in browser'?  Note:  The option is unavailable to un-check box.

    Hi URT301,
    Please see this document: PDF Ownership when Reader X is Installed with Acrobat. You'll find several solutions to this problem in the FAQ section.
    Please let us know how it goes.
    Best,
    Sara

  • 23" Cinema Display: Can't disable MacBook display to use only the cinema?

    Hi,
    I just bought a 23" cinema display with the intention of using it exclusively while I use a wireless keyboard and just keep my MacBook closed. I notice that when I set the display preferences to "mirror," the quality of the cinema display reduces greatly, since it's only able to be set at the maximum display resolution allowed for the MacBook when mirroring. This seems to defeat the purpose of having the cinema display. So, I guess I have several questions:
    1. Can I close the MacBook without it going to sleep?
    2. Can I make the cinema display the primary display (with application menus, etc.)?
    3. Can I disable the MaBook display and use only the cinema display?
    Thanks,
    Stew

    1. Can I close the MacBook without it going to sleep?
    No, but if the power adapter is connected, you can wake it with the external keyboard or mouse (make sure wake-up is enabled in the Bluetooth system preference), and it will continue to run with the lid closed.
    2. Can I make the cinema display the primary display (with application menus, etc.)?
    Yes. In the "Arrangement" pane of "Displays" system preference, turn off mirroring and drag the picture of the menu bar to the picture f the external display.
    3. Can I disable the MaBook display and use only the cinema display?
    Yes. Close the lid.

  • How to call web-service using only java code

    Hello, how to call web-service using only java code. I can call it from BPM process or Web Dynpro Java Application, but if I need to call it from ejb component?

    I'm found answer:
    Java and SAP Portal blog: How to call web service from java code example

  • How can i develop charts using only xml defination

    how can i develop charts using only xml defination.can any one please let me know
    manks

    hello,
    in reports 6i the charts are created using oracle graphics which stores the chart definitions in a separate file (.OGD). there is not XML interface for graphics.
    with reports 9i and the introduction of the BIgraphBean the definition of the chart-properties is also done in XML.
    reports 9i will be available with iAS Release 2.
    regards,
    the oracle reports team

  • I have upgraded my MacBook Pro 15 late 2011 to 8Gb RAM, now when I go to about this mac in it more info it doesn't show AMD graphics card as it used to before, it just show  Intel HD Graphics 3000 512 MB is that a problem that I need to worry about?

    I have upgraded my MacBook Pro 15 late 2011 to 8Gb RAM, now when I go to about this mac in it more info it doesn't show AMD graphics card as it used to before, it just show  Intel HD Graphics 3000 512 MB is that a problem that I need to worry about?
    and in system report >> hardware >> Graphics/Display >> it shows both grafics card listed.

    Some Mac's when the RAM is increased the Intel HD 3000 integrated graphics will bump itself up to the higher video RAM it takes, this seems to be what occured.
    It also means the dedicated graphics card will be used less, but only so slightly less.
    You obviously still should have both, you can test this by turning off Graphics Switching in Energy Saver, that will use the decicated AMD card all the time.
    You can also run Cinebench and compare the scores here
    Mac video card performance

  • HP Notebooks HP Notebooks amd display adapter and ati radeon graphics cards stopped working

    I have a 2000-21DX9 Notebook and keep getting messages solve issues with AMD display adapte and ati radeon graphics cards they stopped working.  When I open the action center to solve the issue It says "Computer unable to download the solution at this time.  Why won't it work and how do I fix it? 

    @pp62 
    ‎Thank you for using HP Support Forum. I have brought your issue to the appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post ( serial numbers and case details).
    If you are unfamiliar with the Forum's private messaging please click here to learn more.
    Thank you,
    Omar
    I Work for HP

  • Which mac mini should i go for: the one with AMD graphic card or Intel. I meanly going to use it for hometheater and HD movies.

    which mac mini should i go for: the one with AMD graphic card or Intel. I meanly going to use this for hometheater and HD movies.

    Intel HD 3000 graphics card can easily handle HD movies up to 1080p. But if you are looking at higher resolutions possibly 4k or 8k that are being released this summer in new TV's, I would go with the AMD card. The AMD card would be good for video and picture applications and also games. But if this is strictly to power your 1080p home theater setup then the choice is obviously the Intel HD 3000.

  • How do I access and use my iTunes gift card balance

    How do I access and use my iTunes gift card balance

    You redeem your gift card to your iTunes account.
    Then you make iTunes purchases and the amount is deducted from your account.
    See this -> iTunes 11 for Mac: Redeem an iTunes allowance, gift certificate, or Gift Card

  • How do I make Visual Studio 2013 use my dedicated graphics card instead of integrated graphics on my laptop?

    I am using Alienware 13 as a portable workstation. I do game development on Unreal Engine 4 using Visual Studio 2013. The issue I am having is that when I want to debug codes in Visual Studio 2013, it launches Unreal Engine 4 through the debugger and uses
    the integrated graphics card rather than my dedicated graphics card, which is an nVida Geforce 860M.
    When I wanted to change the settings in the NVidia Control Panel, I see this:
    The drop-down menu is grayed out, so I cannot select to change the graphics card to my dedicated card.
    What should I do? How do I make it so that Visual Studio uses my dedicated card? Thanks in advance.

    Hi tom_mai78101,
    Thank you for posting in the MSDN forum.
    It seems that it is not the correct forum for this issue, since this forum is to discuss Visual Studio WPF/SL Designer, Visual Studio Guidance Automation Toolkit, Developer Documentation and Help System, and Visual Studio Editor.
    As you said that you want to change the setting so that Visual Studio uses your dedicated card in NVidia Control Panel, since this NVidia Control Panel is third-party tool, we are not support it. So please post this issue this issue directly
    to this NVidia Control Panel Official website:
    http://www.nvidia.com/object/nvidia-communities.html , you will get better support.
    Thanks for your understanding.
    Best Regards,
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • HP pavilion 17 problems switching amd graphics card

    HP pavilion 17 with AMD radeon 8670M
    I tried to switch from intel graphics card to AMD graphics card, at the switchable graphics menu.
    Switched to high performance at some games, but I still can't run the game at high settings, and even low settings are too high, the game is still a bit slow .  I have searched for some solutions, like changing the card in the BIOS, but the setting to change cards, wasn't in the BIOS. Nothing helped, and after a year i still don't have a solution to this problem...
    Does anyone knows a solution to this, what am I doing wrong?
    Thanks,
    Keiko

    i have the same problem my system is around the same 
     hp pavilion 15
     En hurtig AMD A6-5200  2.0 GHz
    8 GB RAM
    integreret AMD Radeon HD 8400
    AMD Radeon HD 8670M grafikkort 

Maybe you are looking for

  • Apple TV via iTunes

    Gidday, I'm profoundly Deaf and I'm wanting to buy an Apple TV I have one question before I actually buy it.. The TV programmes, movies (both buy and rental) do they all offer subtitles or captions? Cheers S1l3ntworld

  • Reg: Purchase order no from accounting document no

    hi, I have to generate a report of vendor billing details,where i have to get the corresponding purchase order no for accounting document no.From bseg i am getting the ebeln field but i have fetched based on posting key bschl ='86' or '81'.for the co

  • Can't get JSF sources from CVS

    I'm trying to download the correct version of JSF to debug a problem I'm having with JSF in Glassfish. I'm using GF v2 b41c, which states that it uses JSF cvs tag: JSF_1_2_GFINT_B17. (See http://wiki.java.net/bin/view/Projects/GlassFishSourcesBundle.

  • IDOC Interface Setup using ALE

    Hi, Can any 1 suggest the best possible configuration steps to setup a idoc interface to two different systems

  • E90 Sofware Updater doesn't work

    I downloaded and tried to install the Software Updater, but with really bad results. I got error message stating that Critical Components are missing and after that with error message 1706 no valid source for Nokia Software Updater. The saddest thing