How to switch into an international keyboard?

How to switch into international keyboard while I am using the apple's wireless keyboard?
You know when u connect the wireless keyboard on ipad, the original keyboard on the ipad screen will disappear. at that time, how can i switch the english keyboard to an international keyboard. (by the way, in my ipad another keyboard is enabled.)
Thx a lot in advance.

i got my own answer
press the "command" then "space" button, then screen will show the international keyboard to choose. using the "space" to choose and confirm.
btw. the wireless keyboard is awesome!

Similar Messages

Does anyone know how to switch off the internal wifi test use a wifi dongle at a usb input?

HI
I am having problems connecting to wifi with a new Mac.
I have tried all kinds of things like shifting and monitoring my router's channel.
Short of using a power cube or crawling under the house and running a cable I have decided perhaps to use a Netgear wifi dongle.
I would like to switch off the internal wifi and allow the external device to connect.
With a new machine I really don't see why I have to do this.
Incidentally all my old devices have no problems with the wifi signal.
Cheers
Jack

Thanks for the suggestions.
Yes I have done all that was suggested on that site.
i have also been in contact with Apple Care.
I have also reset the router firmware.
I downloaded a piece of software called inSSIDer and checked out other wifi channels in the area. I moved my preferred channel to another ones that looked better however that is back on auto now and the router seems to be picking up channel 6 which is the best one and scores the most points.
I use a netgear wifi dongle on my 'smart' tv and was thinking of using that however I am beginning to thisk that 'powerline' products may be the answer.
The Mac is only two weeks old and I seem to be messing about with the wifi connection most of the time.
I actually cleaned the whole disk and reinstalled the operating system earlier this week.
Desperate or what!
Sometimes I think I should just return it but I like to solve problems and will keep going for a while before I lose patience.
Jack

How to switch to french keyboard

Hi guys! im a new mac user and i'm completly lost right now....actually starting to think that it was a bad idea to get a macbook!! anyways....can u tell me how to switch to a french keyboard on this thing??

in the preferences tab you will see keyboard, and then you can change it to be in french instead of english... and if need be you can pop out the keys and move them around to how you are used to...

Diacritical marks for International Keyboard configurations

So where are the accents (igrecs and igravs) for French? Also how can you download other International keyboards? And if you can, will they be missing diacritical marks above words too; such as the fáda for Irish?

Hmm I just wanted the Irish keyboard to put a fáda over the vowels.
You don't need any special keyboard to do that. áéíóú are available on the iPod Touch by holding down the base letter. A menu of accented versions of the base letter then appears which you can choose from.
Anyway my cousin said the unicode for the french igrecs and igravs is probably different anyway so they wouldn't work as a substitute.
French would work fine. The diacritics are exactly the same in Unicode.
I was just curious if Apple has support for international keyboards.
Yes, the full OS X has dozens of keyboard layouts.
But I guess what the iPod touch has on it is very rudimentary so it wouldn't bother with most keyboards. I'm not even sure if I saw Korean on it. It seemed to only have Japanese.
Because of the method the iPod Touch uses (i.e. an extra menu of variations for each character), there's no need for a lot of keyboards to cover a lot of languages. But it is still limited to W. European, E. European, and Japanese at this time. Cyrillic, Greek, Arabic, Hebrew, Korean, Chinese, Indic, Thai, Vietnamese, and various other languages cannot yet be input.

I would like to know how do I install the brazilian keyboard into macbook air, keyboard with accents (Portuguese Language), I tried so many times how to put into it (Macbook Air). So, thanks for now! I'm waiting for it.

I would like to know how do I install the brazilian keyboard into macbook air, keyboard with accents (Portuguese Language), I tried so many times how to put into it (Macbook Air). So, thanks for now! I'm waiting for it.

After you go to system preferences/keyboard/input sources as suggested by sberman, click on the + button and scroll down to Portuguese and select that. Over at the right you will see the choices Brazilian, Brazilian abnt, Portuguese. You might want to add all three to see which you like best.
The "Brazilian" layout is pretty useless. It is identical to the US layout and the only way to make accents is via the option key shortcuts: option + n, then o gives you õ.
The Brazilian abnt and Portuguese layouts have dead keys for adding accents over at the right edge of the keyboard. But these may not match what is printed on your keys.
You may prefer to stay with the US layout. On that you can get accented letters by just holding down the base letter and selecting what you want from the popup menu that appears. Or you can use the option key shortcuts.
Another option is the layout called US International PC, which has accent deadkeys on ~, ', etc.
Which ever layout you want to use, you must select it in the "flag" menu at the top right of the screen.
To see which key does what for any layout, use the Keyboard Viewer:
http://support.apple.com/kb/PH13746

Silly me. I was playing around with the virtual keyboard; found the international keyboard list. I turned on the Russian/Cyrillic keyboard. Surprise, surprise, now everything is in Russian, and I can't see how to restore everything to English. Help!

Silly me. I was playing around on the settings portion of my I-Pad2, when I found the international keyboard section. I reset the keyboard to Russian to see what it would look like. Now, the keyboard is in Russian, and so are all the settings elements. I can't see how to get it all back into English. Help,

http://support.apple.com/kb/HT4051

How to select the data from a Maintainance View into an internal table

Hi All,
Can anybody tell me how to select the data from a Maintainance View into an internal table.
Thanks,
srinivas.

HI,
You can not retrieve data from A mentenance view.
For detail check this link,
http://help.sap.com/saphelp_nw2004s/helpdata/en/cf/21ed2d446011d189700000e8322d00/content.htm
Regards,
Anirban

How to read a table and transfer the data into an internal table?

Hello,
I try to read all the data from a table (all attribute values from a node) and to write these data into an internal table. Any idea how to do this?
Thanks for any help.

Hi,
Check this code.
Here i creates context one node i.e flights and attributes are from SFLIGHT table.
DATA: lo_nd_flights TYPE REF TO if_wd_context_node,
        lo_el_flights TYPE REF TO if_wd_context_element,
        ls_flights TYPE if_main=>element_flights,
        it_flights type if_main=>elements_flights.
navigate from <CONTEXT> to <FLIGHTS> via lead selection
lo_nd_flights = wd_context->get_child_node( 'FLIGHTS' ).
CALL METHOD LO_ND_FLIGHTS->GET_STATIC_ATTRIBUTES_TABLE
IMPORTING
    TABLE = it_flights.
now the table data will be in internal table it_flights.

How to switch off internal macbook screen when using external monitor(s)

as far as i observed, adding external displays ( running different screens on them, not mirroring) to a macbook pro increases the gpu workload and with that comes temperature rise in the laptop and increase in ventilator noise - and probably increased hardware aging and risk of component faillure due to high temperature inside the laptop.
simply try connecting two external 27" screens and open some flash video on both of them. then run a temperature monitoring software and watch temps rise, compared to running same flash videos / demanding tasks only on one connected external screen or only on the laptop screen with no external monitor connected.
especially in mavericks, due to its increased background routines, such a set-up appears ever the more taxing, then again who does not love apple`s nice adds showing laptops with two 27” screens connected to it and the workspace vision they invoke....
i have seen temps around 100° to 102° celsius on a 13" macbook pro 2012 edition, which i would expect is territory where the cpu / gpu temp safety switches will trigger system shutdown any time soon ( hardware status before verified as fully in order by apple service and default osx installation)
imagine your anti-virus software starting some realtime content screening while runnign some demanding tasks already and the system shuts down easily (all such situation observed in reality)
(would be interesting to see how a retina display macbook fares with 2 external monitors running demanding tasks, considering the retina display already increased taxing for the gpu - any experience from users of such a setup would be very much appreciated as it will provide critical purchase decision intelligence for all of us envisioning a retina-book and two big screens adoring our desks...)
turning down the macbook`s built-in screen`s backlight may reduce power consumption but i have not seen any evidence that it switches off the gpu-to-screen feed and respective gpu load - it certainly did not prevent gpu, cpu, board, etc temps to rise to borderline levels.
so the key question here is, how to switch off the macbook pro`s built-in screen in order to avoid gpu cycles being wasted on that screen ( and the resulting heat developments) when working with big external screen(s) connected to the laptop ?

this thread talks about running several monitors as advertised by apple and running demanding task on them.
with the lid open, the keyboard offers a very efficiant heat escape vector, which is blocked when the lid is closed - this is a basic and commonsense insulation effect. this thread also mentions the use of temperature monitoring software and thus a repeatable test setup. the temps recorded were also mentioned. they rose when the lid was closed, the running task remaining unchanged. as far as i could track down the cpus in discussion will shut down around the 105 degree celsius range. i observed system shut downs when the system approached 103° celsius. not to mention that the fans will run loud well before that.
again this is on hardware checked and ok-ed by apple service.
the question still welcoming an expert answer: is there any way to switch off the built-in macbook monitor while the lid is open ?

How to read xml file and place it into an internal table...

hello all,
can any one help me in - how to read xml data file (placed in application server) and placing the same into an internal table (remove the xml tags or say fetching the xml data without xml tags).

Hi Murashali,
use this.
TYPES: BEGIN OF day,
name TYPE string,
work(1) TYPE c,
END OF day.
DATA: BEGIN OF week,
day1 TYPE day,
day2 TYPE day,
day3 TYPE day,
day4 TYPE day,
day5 TYPE day,
day6 TYPE day,
day7 TYPE day,
END OF week.
DATA xml_string TYPE string.
DATA result LIKE week.
week-day1-name = 'Monday'. week-day1-work = 'X'.
week-day2-name = 'Tuesday'. week-day2-work = 'X'.
week-day3-name = 'Wednesday'. week-day3-work = 'X'.
week-day4-name = 'Thursday'. week-day4-work = 'X'.
week-day5-name = 'Friday'. week-day5-work = 'X'.
week-day6-name = 'Saturday'. week-day6-work = ' '.
week-day7-name = 'Sunday'. week-day7-work = ' '.
CALL TRANSFORMATION ...
SOURCE root = week
RESULT XML xml_string.
CALL TRANSFORMATION ...
SOURCE XML xml_string
RESULT root = result.
Regards,
Vijay

How to do a SELECT from different tables into an internal table?

How to do a SELECT from different tables into an internal table?
I want to select data from MARA, MARC and ZPERSON and populate my ITAB_FINAL
REPORT zinternal_table.
TABLES:
mara,
marc,
zperson.
TYPES:
BEGIN OF str_table1,
v_name LIKE zperson-zname,
v_matnr LIKE marc-matnr,
v_emarc LIKE marc-emarc,
v_werks_d LIKE marc-werks_d,
v_dstat LIKE marc-dstat,
END OF str_table,
i_table1 TYPE STANDARD TABLE OF str_table1.
DATA:
BEGIN OF str_table2,
v_mandt LIKE mara-mandt,
v_ernam LIKE mara-ernam,
v_laeda LIKE mara-laeda,
END OF str_table2,
itab_final LIKE STANDARD TABLE OF str_table2.

first find the link between mara , marc and zperson , if u have link to 3 tables then u can jus write a join and populate the table u want ( thats final table with all the fields).
u defenitely have alink between mara and marc so join them and retrieve all data into one internal table.
then for all the entries in that internal table retrieve data from zperson into another internal table.
then loop at one internal table
read another internal table where key equals in both the tables.
finally assign fileds if sy-subrc = 0.
gs_finaltable-matnr = gs_table-matnr
etc...
and finally append gs_finaltable to gt_finaltable.
there u go ur final table has all the data u want.
regards
Edited by: BrightSide on Apr 2, 2009 3:49 PM

How to extract data from info cube into an internal table using ABAP code

HI
Can Anyone plz suggest me
How to extract data from info cube into an internal table using ABAP code like BAPI's or function modules.
Thankx in advance
regds
AJAY

HI Dinesh,
Thankq for ur reply
but i ahve already tried to use the function module.
When I try to Use the function module RSDRI_INFOPOV_READ
I get an information message "ERROR GENERATION TEST FRAME".
can U plz tell me what could be the problem
Bye
AJAY

How to switch from a word doc to another using a keyboard shortcut?

how to switch from a word doc to another using a keyboard shortcut?

Cmd+tilde to switch between open Word documents, or
Cmd+tab to switch between open applications, if that's what you are after?

In Mail 7.3 on my Retina MacBook Pro on OS 10.9.4, how can I type from the keyboard into a mail message using the Apple Symbols font?

In Mail 7.3 on my Retina MacBook Pro on OS 10.9.4, how can I type from the keyboard into a mail message using the Apple Symbols font?
When I select the Apple Symbols font from the list accessed from under Format/"Show fonts"/collection-all fonts/Apple Symbol, and then continue typing, I get normal letters, if in a slightly different font.
How can I type using the Apple Symbol font? I want to use that font to include keyboard and cursor selections of actual screen symbols to help write easily understood explicit computer lesson emails to my 92 year-old mom from a few hundred miles away.
Steve

In Mail 7.3 on my Retina MacBook Pro on OS 10.9.4, how can I type from the keyboard into a mail message using the Apple Symbols font?
When I select the Apple Symbols font from the list accessed from under Format/"Show fonts"/collection-all fonts/Apple Symbol, and then continue typing, I get normal letters, if in a slightly different font.
How can I type using the Apple Symbol font? I want to use that font to include keyboard and cursor selections of actual screen symbols to help write easily understood explicit computer lesson emails to my 92 year-old mom from a few hundred miles away.
Steve

Macbook Air 13" - How to switch off internal monitor?

While working with an external monitor (e.g. TV), I would like to switch off the internal monitor. Is there any function which helps me?

this thread talks about running several monitors as advertised by apple and running demanding task on them.
with the lid open, the keyboard offers a very efficiant heat escape vector, which is blocked when the lid is closed - this is a basic and commonsense insulation effect. this thread also mentions the use of temperature monitoring software and thus a repeatable test setup. the temps recorded were also mentioned. they rose when the lid was closed, the running task remaining unchanged. as far as i could track down the cpus in discussion will shut down around the 105 degree celsius range. i observed system shut downs when the system approached 103° celsius. not to mention that the fans will run loud well before that.
again this is on hardware checked and ok-ed by apple service.
the question still welcoming an expert answer: is there any way to switch off the built-in macbook monitor while the lid is open ?

How to switch into an international keyboard?

Similar Messages

Maybe you are looking for