How to switch off screen updates

Hey there, fellow (extend)scripters,
I have created a bunch of scripts that tackle the entire book, with many chapters, and performing lots of search-and-replace stuff. While testing, I want to see what is going on, so I have all documents open and I can see the fast scrolling etc. But to speed up the script after testing is done, I insert two lines to switch displaying off and on again. It seems that this is not enough, for FrameMaker keeps frantically switching from one document to the next for a short while, then makes the screen go blank with a discomforting "Not responding" message in the title bar.
Has anyone succesfully figured out how this whole screen displaying stuff really works in ExtendScript ?
Thanks
Jang

If you are saying that you've forgotten the passcode to unlock the iPad then you will need to connect the iPad to the computer that you normally sync to and you should then be able to reset the iPad and restore/re-sync your content to it (http://support.apple.com/kb/HT1212) - you may need to put the iPad into recovery mode for your iTunes to be able to reset it : http://support.apple.com/kb/ht1808
If you do it via a different computer then :
If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present.

Similar Messages

  • Does anybody no how to switch off automatic updates on the iphone 5.

    Does anybody no how to switch off automatic updates on the iphone 5 many thanks was1521 UK.

    The reason i asked about automatic updates was because my provider 02 told me about it they said turn it off or get something called a Bolt-on which would provide me with so much internet data at a set price so thanks for your reply Kilted Tim.

  • How to switch off screen blocking if I forget password and couldn't use iTunes?

    How to switch off screen blocking if I forget password and couldn't use iTunes?

    If you are saying that you've forgotten the passcode to unlock the iPad then you will need to connect the iPad to the computer that you normally sync to and you should then be able to reset the iPad and restore/re-sync your content to it (http://support.apple.com/kb/HT1212) - you may need to put the iPad into recovery mode for your iTunes to be able to reset it : http://support.apple.com/kb/ht1808
    If you do it via a different computer then :
    If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present.

  • How to switch off screen while playing songs in 5G iPod

    Any ideas how to switch off the screen completely (not just reducing the brightness) while playing the songs.
    i'm thinking that this could improve the battery life !!!
    30GB Video iPod   Windows XP Pro  

    No you can not do this; you can only turn off the Backlight.

  • How to Switch Off Updates ??

    Hi to all !!  Does anubody know how to switch off automatic updates ?
    Too much traffic abroad (
    Thanks !!

    I mean original (default) BB software.
    My providor told me its automatic updates could be on by default.
    Thank you for time ! 

  • How do you switch off automatic updates on atv2

    Could some one explain how to switch off automatic updates on atv2.
    regards ray

    Chances are if you have modified AppleTV 2 software then the additions you have added will have an option to disable any updates.
    Specifically discussing jailbreaking/modifying AppleTV is prohibited by Apple.
    AC

  • How to switch off internal macbook screen when using external monitor(s)

    as far as i observed, adding external displays ( running different screens on them, not mirroring)  to a macbook pro  increases the gpu workload and with that comes temperature rise in the laptop and increase in ventilator noise - and probably increased hardware aging and risk of component faillure due to high temperature inside the laptop.
    simply try connecting two external 27" screens and open some flash video on both of them. then run a temperature monitoring software and watch temps rise, compared to running same flash videos / demanding tasks only on one connected external screen or only on the laptop screen with no external monitor connected.
    especially in mavericks, due to its increased background routines, such a set-up appears ever the more taxing, then again who does not love apple`s nice adds showing laptops with two 27” screens connected to it and the workspace vision they invoke....
    i have seen temps around 100° to 102° celsius on a 13" macbook pro 2012 edition, which i would expect is territory where the cpu / gpu temp safety switches will trigger system shutdown any time soon ( hardware status before verified as fully in order by apple service and default osx installation)
    imagine your anti-virus software starting some realtime content screening while runnign some demanding tasks already and the system shuts down easily (all such situation observed in reality)
    (would be interesting to see how a retina display macbook fares with 2 external monitors running demanding tasks, considering the retina display already increased taxing for the gpu - any experience from users of such a setup would be very much appreciated as it will provide critical purchase decision intelligence for all of us envisioning a retina-book and two big screens adoring our desks...)
    turning down the macbook`s built-in screen`s backlight may reduce power consumption but i have not seen any evidence that it switches off the gpu-to-screen feed and respective gpu load - it certainly did not prevent gpu, cpu, board, etc temps to rise to borderline levels.
    so the key question here is, how to switch off the macbook pro`s built-in screen in order to avoid gpu cycles being wasted on that screen ( and the resulting heat developments)  when working with big external screen(s)  connected to the laptop ?

    this thread talks about running several monitors as advertised by apple and running demanding task on them.
    with the lid open, the keyboard offers a very efficiant heat escape vector, which is blocked when the lid is closed - this is a basic and commonsense insulation effect.  this thread also mentions the use of temperature monitoring software and thus a repeatable test setup. the temps recorded were also mentioned. they rose when the lid was closed, the running task remaining unchanged. as far as i could track down the cpus in discussion will shut down around the 105 degree celsius range. i observed system shut downs when the system approached 103° celsius.  not to mention that the fans will run loud well before that.
    again this is on hardware checked and ok-ed by apple service.
    the question still welcoming an expert answer: is there any way to switch off the built-in macbook monitor while the lid is open ?

  • How to switch off my main screen (Imac 24") to use an external proyector?

    Please Help!
    How to switch off my main screen (Imac 24") to use an external proyector?
    It's not comfortable when you want to see a nice movie!
    Thanks
    Jack

    As I already said in my first reply post, you cannot turn off the iMac's display. The best you can do is display black, which many applications that have a +full screen+ mode will do, if the full screen mode is on the other display.
    Alternately, you can move the menu bar (along with Dock and disk icons) from the iMac's screen to the second display. This is done in System Preferences Displays pane Arrangement tab, by dragging the white bar in the diagram from one screen to the other. Once the menu bar and other features are on the second display, the only thing showing on the iMac's display should be the Desktop background. If you pick a Desktop background that is all black, your iMac's display will be showing a black screen (although it will still not be turned off).

  • How to switch off the screen off HP Pavilion X2 10.1?

    Hello, How to switch off the screen off HP Pavilion X2 10.1? For example I am reading something in tablet mode and now I want to switch off the screen then how do I do it? Thanks

    Close the lid, or turn the backlight all the way down to 0.

  • How to switch off the internet connection via GPRS by iphone 3G

    how to switch off the internet connection via GPRS by iphone 3G?
    need help.
    thanks

    Your router may not have given your iPod a valid IP address. Go to Settings > Wifi > your network name and touch the ">" to the right to see the network details. If the IP address shown starts with 169 or is blank then your router didn't provide an IP address and you won't be able to access the Internet.
    Sometimes the fix can be as simple as restarting your router (remove power for 30 seconds and restart). Next, reset network settings on your iPod (Settings > General > Reset > Reset network settings) and then attempt to connect. In other cases it might be necessary to update the router's firmware with the latest from the manufacturer's support web pages.
    If you need more help please give more details on your network, i.e., your router make/model, the wifi security being used (WEP, WPA, WPA2), etc.

  • How to switch off automatic creation of the business partner?

    Hello!
    Advise please why in erp after creation of the customer automatically form business partner? How to switch off automatic creation of the business partner? It very much disturbs, because business partner are created from crm. Because of automatic creation business partners are duplicated.

    Hi,
    I have made the following customizing settings to activate customer integration with business partner, but the problem is when I create a BP with a role (FI-Customer) the customer is not created automatically.
    1. Set BP Role Category for Direction BP to Customer
    Roles: FLCU00 - Business Partner FI Customer (FS: BP)
    FLCU01 - Business Partner Customer (FS: BP)
    2. Defined the Number assignment for Direction BP to customer
    4. Customer account group and numbering is also defined.
    3. Created a BP with BP Role FLCU00, I can see the Customer - General Data tab, but no customer was automatically generated by the system.
    Kindly let me know if any customizing I have missed.
    Regards
    Ameya

  • How to switch off scroll and zoom functions of touchpad on Satellite L

    Hi.
    Can anyone tell me how to switch off the scroll and zoom functions for the Synaptics Touchpad v7.2 .
    Can't seem to do it via the Control Panel.
    Any suggestions.

    Hi buddy,
    > Can't seem to do it via the Control Panel.
    You can only disable the virtual scrolling function if the touchpad driver is installed properly. The driver provides extended functions and allows you to disable/enable special features. If you dont have installed the touchpad driver download it on official Toshiba page:
    http://eu.computers.toshiba-europe.com > Support & Downloads > Download Drivers
    Then navigate to control panel as the previous user wrote for disabling the scroll function.
    Can you find it now?

  • How to switch off the pop-up message in rspcm

    Hi there,
    Does anyone know how to switch off the pop-up message in rspcm?
    The monitoring user shouldn't get the pop-up below anymore:
    „Statusänderung des Requests – Sollen Folge-Events ausgelöst werden?“
    The pop-up in english might be
    “status change of request - trigger subsequent processing?” or similar
    We would like to outsource the process chain monitoring (rspcm) to our operating.
    But operating shouldn't deal with the pop-up above and make decisions especially when delta infopackages are involved.
    Thanks for your help in advance.
    Regards,
    Wolfgang Smetana

    Elena,
    Is the subsequent process defined on success or failure ? if that is not defined - you might come across this message.....
    Arun

  • How to switch off  the  error sound  in Triversity

    Hi
    How to switch off the  error sound in Triversity, The audio of the computer is already in mute state. The problem is found with DELL pc and not with HP

    Mohammed,
    There is, actually, a better way to get rid of that annoying beep every time you get a policy prompt, error, etc.
    I have a Dell Vostro 1300 and I have done this in other Dell laptops with sucess. Perform the following:
    Go to Control Panel --> System --> (on the HARDWARE tab) Click on DEVICE MANAGER
    In DEVICE MANAGER, click on VIEW --> SHOW HIDDEN DEVICES
    Now, go to "NON-PLUG AND PLAY DRIVERS" and you will see "BEEP" listed as an active device. Right click on it and select "DISABLE" and then reboot your laptop.
    You should be golden right after the reboot.
    Hope this helped,
    Alfredo Carigga

  • How to switch off the Wireless Transmitting of the xDock for the iPod?

    Hey,
    Can anybody help me how to switch off the wireless streaming of the xDock transmitter for the iPod? I tried to do it by resetting and I already read the FAQ but nothing seemed to work...
    Thanks for your help. ;-)
    Hi,
    Kann mir irgendjemand sagen, wie ich bei meinem xDock Transmitter f?r den iPod das wireless streaming ausschalten kann? Ich habe bereits versucht das Ger?t zu resetten und habe das FAQ gelesen aber nichts hat geholfen...
    Vielen Dank im Vorraus f?r eure Hilfe ;-)

    turn it into standby mode
    unplug the power supply from the x-fi dock
    press the volume controller and hold it while plugging the power supply
    the link control led on the backside will glow shortly and and turn off
    thats it
    to reactivate it press both the forward and backward wind button for at least 3 seconds
    But I think, this is really a shame, that the WLAN network is unusable when using the x-Fi wireless function.

Maybe you are looking for

  • Namespace Communication Error

    I'm having the following issue when trying to login to Hyperion Workspace (in EPM 11.1.2) . I get to the login page fine, and when I login it takes me into Workspace, but a warning immedately pops up saying *"Namespace Communication Error".* I can di

  • In Finder since 10.8.3 – delay when quickly moving items around

    I think this is new since the Finder of OS X 10.8.3. It's kind of hard to explain, but here goes: If one triest to move items around quickly after each other, there's like a second delay before you can do the second "grab". Like this: click and drag

  • Network folder opens/closes/disappears/reappears on its own (really)!

    I have an external drive hanging off my Airport Extreme and accessed wirelessly. I just created a new folder on the drive to save some files I want to share with another machine on my local network. I copied some files to it (which didn't appear in F

  • Error WUC-14 after open a File with CLIENT_TEXT_IO.FOPEN (Oracle 10g)

    Hi, the error WUC-14 occurs during open a file with forms10g. F_VersandZahlen := CLIENT_TEXT_IO.FOPEN (F_Dateiname,'w'); Afterwards the error message it ist possible to write into the file and close it correctyl (without am error message - also the I

  • Pop port that supports a mic

    Does anybody know if there is a pop port that supports a mic like the shure mpa? http://www.amazon.co.uk/SHURE-MPA-Adapter-for-iPho​ne/dp/B000UD205K It's for my E61i. Cheers David