How to switch target from DB Console to Grid Control

Hi,
Here's the deal :
I need to switch from a Database which was running in DB Console locally on that comp to be part of the 10g Grid Control ( on a OEL Linux 4 ).
I installed the agent and set it to use the Grid Server but I cant get the listener to communicate (on the grid) ; coz am sure I need to somehow knock that database from using DBConsole and switch over to be part of the GRID.
I verified that emd.properties of that agent has the correct Repository URL.
Could you point me in the right direction ? I'd really appreciate that.
Thank you.

Hi,
The reason I did the deconfig option was cause : Initially the database on "server3.sam" was configured to use DBConsole. Later on when I decided to hook this server ( and DB ) to the grid, I found that the GRID didnt recognize the the DB on "server3.sam" and the server name wont get added under HOSTS.
Even though the emd.properties had the correct Repository URL of the GRID, it didnt help.
At this stage here is what I found as per Oracle Documentation :
" You will need to deconfigure Database Control if you want to configure Grid Control to use a database already configured with Database Control. "
So I assumed that for all DB's currently using DBConsole, inorder for them to link up with GRID we had to deconfigure them first and run dbca to reconfigure with GRID settings. This worked out for me. Hence my suggestion.
If this aint the correct way to hook up, could you please enlighten me ? Also can you tell me what exactly is deconfig doing ?

Similar Messages

My Verizon wireless service at my house has begun to degrade over the last 6 Month. It has begun to be very frustrating seeing how we switched over from Satellite to Verizon 4GLTE wireless device. How do I contact someone to see what the issue may be. Z

My Verizon wireless service at my house has begun to degrade over the last 6 Month. It has begun to be very frustrating seeing how we switched over from Satellite to Verizon 4GLTE wireless device. How do I contact someone to see what the issue may be. Zip Code 22580.

Out of curiosity how much data per month are you using? Another factor could be if neighbors have all done the same thing as you and the node is being overloaded on home internet use.

Urgent : how to select the rows in the ALV Grid Control

How to select the rows in the ALV Grid control,
I am facing the situation where i need to select the row/rows in the Grid control and then to lock the entries,
If anyone have the solution please help me out
<b>Its very Urgent</b>

Hi Bharath,
Go through this hope u can understand.
SEL_MODE. Selection mode, determines how rows can be selected. Can have the following values:
A Multiple columns, multiple rows with selection buttons.
B Simple selection, listbox, Single row/column
C Multiple rows without buttons
D Multiple rows with buttons and select all ICON
Setting and getting selected rows (Columns) and read line contents
You can read which rows of the grid that has been selected, and dynamic select rows of the grid using methods get_selected_rows and set_selected_rows. There are similar methods for columns.
Note that the grid table always has the rows in the same sequence as displayed in the grid, thus you can use the index of the selected row(s) to read the information in the rows from the table. In the examples below the grid table is named gi_sflight.
Data declaration:
DATA:
Internal table for indexes of selected rows
gi_index_rows TYPE lvc_t_row,
Information about 1 row
g_selected_row LIKE lvc_s_row.
Example 1: Reading index of selected row(s) and using it to read the grid table
CALL METHOD go_grid->get_selected_rows
    IMPORTING
      et_index_rows = gi_index_rows.
DESCRIBE TABLE gi_index_rows LINES l_lines.
IF l_lines = 0.
    CALL FUNCTION 'POPUP_TO_DISPLAY_TEXT'
         EXPORTING
              textline1 = 'You must choose a valid line'.
    EXIT.
ENDIF.
LOOP AT gi_index_rows INTO g_selected_row.
     READ TABLE gi_sflight INDEX g_selected_row-index INTO g_wa_sflight.
    ENDIF.
ENDLOOP.
Example 2: Set selected row(s).
DESCRIBE TABLE gi_index_rows LINES l_lines.
IF l_lines > 0.
    CALL METHOD go_grid->set_selected_rows
        exporting
          it_index_rows = gi_index_rows.
ENDIF.
Reward points if helpful.
Thanks
Naveen khan

How to migrate targets from one oem to another oem

Hi ,
we have two gridcontrols as follows
https://oemgrid1:7799/em/console
https://oemcnt:7799/em/console
we have to move the 10 targets from one OEM ( https://oemgrid1:7799/em/console) to another OEM ( https://oemcnt:7799/em/console ) inclusing data ...
how to migrate , any idea ?

A) Assuming that both the EM are of same version, then you cannt migrate data and targets from one em to another.
B) Assuming that both the EM are of different versions like EM1 10.2.0.5 and EM2 12.1.0.2 then also you cannt migrate data and targets from one em to another. In this case you still have the option to undergo the EM Upgrade process which will automate the historical data and target migration. Read about EM upgrade : http://docs.oracle.com/cd/E24628_01/upgrade.121/e22625/toc.htm

How to switch Datasource from OLE to ODBC for existing report

I have a report that must be deployed to an app that requires all datasource connections to be ODBC. I do not have access to the source for this app since it is from/developed by a 3rd party.
My report has 3 commands (Command, Command_1, Command_2) against an OLE datasource. I cannot figure out how to switch these over from OLE to my ODBC datasource and still maintain all the existing Crystal internal references to fields for the content, formulas, etc.
Thank you in advance for your assistance!

Hi Marvin
There is a SAP note that helps us to update the Datasource location. The Note # is 1215594.
Link to the Note is as given below:
https://bcp.wdf.sap.corp/sap(bD1lbiZjPTAwMQ==)/bc/bsp/sno/ui_entry/entry.htm?param=690076005F006D006F00640065003D003000300031002600690076005F007300610070006E006F007400650073005F006E0075006D006200650072003D0030003000300031003200310035003500390034002600
Hope this helps.
Thanks

How to switch to from one AppStore to another (ie: from uk to Ireland)

Hi
Can u please give me some support on how to switch from one Appstore account to another?
Thanks
Loic

I'm not sure that I understand what you are saying. If you managed to purchase apps in two different country's stores, you must have a credit card in each country that is tied to a physical address in that country.
See if this makes any difference. Go the App Store and swipe to the bottom of the screen in the featured tab. Tap on your Apple ID and sign out. Then sign in again and see if that straightens things out for you.

How to switch CC from Windows to Mac

I have Creative Cloud on my Windows desktop and laptop. I am considering moving to a new Macbook Pro. How do I switch CC from Windows to Mac?
Thanks,
Mike

I appreciate the advice, but I've discovered that my OS has to be updated first (was 10.6.8) and am in the process of upgrading to Yosemite. Then I will try to login to Creative Cloud on the Mac and from there navigate as you describe. I hope to report this worked!
Mike

How to switch system from English to Chinese

How to switch system language from English to Chinese

Go to system preferences/language & region and move English to the top of the list and restart.

How to switch user from the current user using shell script code

Hi Experts,
I have an requirement to login into a particular user from the shell script concurrent program. I do have credentials for that particular user. I want to login and run few commands from that particular user. Please let me know if there are any methods to login as a particular user using the username, password from shell script program.
Thanks a lot.

Thanks for your reply. However we cannot use su command from a shell script program. How to enter password from shell script program?http://tinyurl.com/3t7cwjh
Thanks,
Hussein

DB target status shows "Up" in Grid Control console, but actually "Down"

We've recently installed Grid Control 10.2.0.5. We recently noticed issue regarding false status indicators for several db targets monitored. From GC console, db target show status "Up" (Green Arror) when db is actually down. Should show status as being down (Red Arrow). Is this a known bug? Has anybody experienced this behavior? Can anybody please advise and/or provide solution to this issue?
Thank you in advance.
Best,
Doin

It seems that properties are missing..
Follow the steps,
Login to EM Grid-->Targets > Databases--> Select the radio buttion for PROD Database --> click configure --> Provide dbsnmp password --> click 'Test connection' --> finish
Please reward good answers by marking them correct or helpful...

How can i confirm that i have the grid control ?

Hi,
I have oracle 10g database , we have dbconsole. But i don't know wherther we have the grid control or not ??? how can i check that ??
And one more thing , i have the oracle 817 databases , in need to register that database into the GRID . Can any one send me the proper doc. for 817 to install into grid control db.
$ emctl status dbconsole
Oracle Enterprise Manager 10g Database Control Release 10.2.0.3.0
Copyright (c) 1996, 2006 Oracle Corporation. All rights reserved.
http://prodgv1:1158/em/console/aboutApplication
Oracle Enterprise Manager 10g is running.
Logs are generated in

I have oracle 10g database , we have dbconsole. But i
don't know wherther we have the grid control or not
??? how can i check that ?? What are you looking for exactly? What does "do we have the grid control" mean?
Did you download and install this?
A "default" install comes with three Oracle homes, with directories db10g, oms10g and agent10g in the 'basedir'. Kinda hard to miss...
With proper environment setup, you could try
$ emctl status oms
To manage Targets (as called in EM terms), you would install a Management Agent on each host to start monitoring hosts, listeners, databases, application servers, oc4j instances, and other types of targets. You "add hosts" via addition of agents.
And one more thing , i have the oracle 817 databases
, in need to register that database into the GRID .
Can any one send me the proper doc. for 817 to
install into grid control db.No need to send anything, the documentation is available here on OTN (look in the top menu "shortcuts", Documentation -> Enterprise Manager).
There are several options (version dependent of course) available for deploying agents. But you need a OMS + Repository first.
Further discussion probably belongs in the dedicated Enterprise Manager.
Message was edited by:
orafad

How to add a new server to the grid control

Hi ,
OEM 10g grid control has already bee installed n our site . But I don't know how a add /configure a new sever / database into that . Do I need to install the agent software on the destination machine OR is there any way to add the new sever from the 10g grid control itself ... Please help me out . You can also revert me back on my id [email protected]
redgs
RAHUL

thnx for replying .
Could you please tell me the patch number that I need to download for OEM grid control 10.2.0.3 . Actually I searched for lot of docs . But didn't found doc regarding installation of oem agent and agent PATCH number .
So , Please revert back with necessary Patch number and all the steps that I need to be follow . Thanx in advance
regds
RAHUL

Can I make a Data Guard configuration using EM console without Grid Control

Can I make a Data Guard configuration using EM console without Grid Console?
Can I download Grid Console software from Oracle website without cost?

Assuming this is for 10g,
You could use Oracle® Data Guard Broker
Even you can download Grid Control software for free from Oracle site, you can't legally use it without license.

How to monitor RAC services and nodeapps in Grid Control

Hi,
I have created a number of RAC service names such as GL on a 2-node RAC and would like to use Grid control 10.2.0.2 to monitor the availability of those services and nodeapps. I was not able to find anything in Grid Control that would allow me to configure that. What are being monitored now are the listeners, database instances and nodes. Would it be possible to monitor more than just the RAC listeners, instances and nodes?
thanks.

I don´t think that there is an out-of-the-box metric. However, CRS monitors your services and Grid Control monitors CRS errors. If you need more granular monitoring, I have 2 suggestions:
1) user callouts:
[http://download.oracle.com/docs/cd/B28359_01/rac.111/b28254/hafeats.htm#RACAD7133]
2) extending oracle enterprise manager
I have written a paper on how to extend oem at [http://www.ora-solutions.net/web/papers/]
"Extending Oracle Enterprise Manager to collect HP-UX glance data"
You can follow the instructions to build a new target type called "RAC_SERVICE" and add your serivces as targets, e.g. S_BATCH, S_ONLINE, S_HR.
Best regards,
Martin Decker
www.ora-solutions.net
Edited by: mdecker on Jan 2, 2009 10:57 AM
Edited by: mdecker on Jan 2, 2009 10:59 AM

How do you gracefully error/exit an ALV Grid Controls

I have a report that uses ALV grid controls. Inside the screens, I am opening a file, and need to give an error if the file does not successfully open. I do not have any problem doing this, BUT when I error, it takes me totally out of the program, and I really just want to get back to the report selection screen. I have not been successful in finding out how to do this. Any help is very much appreciated!! Thanks!

Here is how some of the code looks....this is the initial call into the first screen of the ALV grid. From the screen 100 of the ALV Grid, I want to be able to hit the green back arrow button and go back to the report selection criteria so that the user can easily change a file name in case they entered it wrong, etc. Here is the code:
START-OF-SELECTION.
IF NOT p_ofile IS INITIAL.
    CONCATENATE p_opath p_ofile INTO p_ofile.
ENDIF.
IF NOT p_sfile IS INITIAL.
    CONCATENATE p_spath p_sfile INTO p_sfile.
ENDIF.
IF NOT p_ifile IS INITIAL.
    CONCATENATE p_ipath p_ifile INTO p_ifile.
ENDIF.
IF NOT p_ofile2 IS INITIAL.
    CONCATENATE p_opath p_ofile2 INTO p_ofile2.
ENDIF.
IF NOT p_sfile2 IS INITIAL.
    CONCATENATE p_spath p_sfile2 INTO p_sfile2.
ENDIF.
IF NOT p_ifile2 IS INITIAL.
    CONCATENATE p_ipath p_ifile2 INTO p_ifile2.
ENDIF.
IF NOT p_ofile3 IS INITIAL.
    CONCATENATE p_opath p_ofile3 INTO p_ofile3.
ENDIF.
IF NOT p_sfile3 IS INITIAL.
    CONCATENATE p_spath p_sfile3 INTO p_sfile3.
ENDIF.
IF NOT p_ofile4 IS INITIAL.
    CONCATENATE p_opath p_ofile4 INTO p_ofile4.
ENDIF.
IF NOT p_sfile4 IS INITIAL.
    CONCATENATE p_spath p_sfile4 INTO p_sfile4.
ENDIF.
IF NOT p_ofile5 IS INITIAL.
    CONCATENATE p_opath p_ofile5 INTO p_ofile5.
ENDIF.
IF NOT p_ofile6 IS INITIAL.
    CONCATENATE p_opath p_ofile6 INTO p_ofile6.
ENDIF.
IF NOT p_ofile7 IS INITIAL.
    CONCATENATE p_opath p_ofile7 INTO p_ofile7.
ENDIF.
IF NOT p_ofile8 IS INITIAL.
    CONCATENATE p_opath p_ofile8 INTO p_ofile8.
ENDIF.
SELECT * FROM zgedwsostmg INTO TABLE xzgedwsostmg.
SELECT SINGLE delimiter_hex FROM zgedwflcnfg
      INTO g_delimiter_hex
      WHERE kappl = 'V1'.
g_hex_value = g_delimiter_hex.
END-OF-SELECTION.
PERFORM load_header_table.
SET SCREEN 100.
Screen 100 Code
PROCESS BEFORE OUTPUT.
MODULE status_0100.
MODULE create_objects.
PROCESS AFTER INPUT.
MODULE pai_100 at exit-command.
MODULE pai_100 INPUT.
CASE ok_code.
    WHEN 'BACK'.
      g_back = 'X'.
      PERFORM exit_program.
     exit.
    WHEN 'EXIT'.
      PERFORM exit_program.
    WHEN 'CANC'.
      PERFORM exit_program.
ENDCASE.
CLEAR ok_code.
ENDMODULE.                 " PAI INPUT
FORM exit_program.
CALL METHOD g_custom_container1->free.
IF NOT g_custom_container2 IS INITIAL.
    CALL METHOD g_custom_container2->free.
ENDIF.
CALL METHOD cl_gui_cfw=>flush.
IF sy-subrc NE 0.
add your handling, for example
    CALL FUNCTION 'POPUP_TO_INFORM'
         EXPORTING
              titel = g_repid
              txt2 = sy-subrc
              txt1 = 'Error in Flush'(500).
ENDIF.
LEAVE PROGRAM.
set screen 0.
leave screen.
leave screen.
leave to screen 1000.
CALL SELECTION-SCREEN 1000.
leave to list-processing.
exit.
leave to screen 0.
ENDFORM.                    " exit_program
As you can see by all the commented lines, I have tried several ways to make this work, but without success. Thanks again for any help!!

How to switch target from DB Console to Grid Control

Similar Messages

Maybe you are looking for