How to switch to ADE 1.6 - complete install guide with pictures

BooksOnBoard.com today (Monday, Sept 22) created a complete install guide to help readers download and install the new ADE 1.6, including some of the nuances such as the Flash download. It can be found at http://www.booksonboard.com/index.php?F=adobe1.6_help. If you click on the major headings, you will be taken further down the page to the illustrations. Everyone is welcome to use it whether or not they buy their eBooks from BooksOnBoard.

Nice.
However, I have to note that linking directly to the Flash Player is a Flash Player EULA violation. You have to send folks through http://www.adobe.com/go/getflashplayer..
Regards,
Bentley Wolfe
Senior Support Engineer, Flash/Flash Player/Digital Editions
Adobe

Similar Messages

If a student doesn't want to give or have a social security number, how does he/she go about getting the installment plan with the new MacBook Pro? Can he/she still get the student discount if a co-signer who is not a student puts down his/her information

Anyone know how to go about this?

Payment plans are contracts. Contracts require personal information. The only way for your SSN (most people have one assigned by parents before age 1) to NOT appear on the contract is if your name does not appear on the contract and you have no legal responsibility.

Macbook upgrade to Snow Leopard will not complete install stuck with reboot screen, turned on off numerous times same scree

I have a Macbook with the Leopard OS, up to date. I decided to install Snow Leopard. Everything went smoothly until the window came up requesting me to restart the laptop after the install. I have done this numerous times same window keeps coming up after restart. I would appreciate any help.
Thanks,
R A

Thank you Watts 300. I unfortunately cannot get the Mac to reboot. I have taken the SL disk out and reinserted a number of times, however the screen remains with the restart message. Crazy.I can power it off but the same restart message keeps appearing.
RA

How to switch Macbook pro screen to projector in Windows

Hi guy,
I've bought a Macbook Pro Intel based and I've installed O/S Windows XP on it.
When I use Windows, I want to change my screen to projector for my presentation but I can not do this. I pressed hot keys from F1-F10 on my Macbook Pro but there's no signal on my Projector.
When I use Leopard, it's working well but in Windows is not.
Could you please help me how to switch screen to projector in Windows installed on a Macbook Pro?
Thanks and best regards,
David

I dont have access to an XP machine but im sure you can access the external display via right clicking on the desktop and try extending to second desktop or using the ATi controlling software to use the secondary display.
afaik theres no way to use the Function buttons (on a mac) like you would on a normal laptop.

I have a NOOK but don't live in UK. How can I get ADE installed on NOOK to download epub files?

I want to download files to my NOOK but cannot do so via NOOK shop as I do not live in the UK or have UK bank account. I Tried download on PC that works ok. But how do I get ADE onto NOOK and install it there. CAN it be done?

There have been quite a few issues with ADE2.0 and various eReaders.
The simplest solution is often to uninstall and reinstall v1.7.2.
Version 1.7.2, it is a little difficult to find, available on Adobe site for Windows and for Mac.
http://helpx.adobe.com/digital-editions/kb/cant-install-digital-editions.html
The forum software is sometimes corrupting the link above. There shouldn't be a blank in 'editio ns.html'. The following redirects to the same page: http://tinyurl.com/diged172

How do I uninstall ADE completely in Windows 7?

How do I uninstall ADE completely from Windows 7?
I have uninstalled it via Control Pane, or at least i thought I had. But when I reinstall it, it remembered all my previous details!!! (One of which is now incorrect!)
That sure is some uninstall program!
How clever of Adobe to have an uninstall program that doesn’t actually uninstall!!!
It is doing my head in

How do I uninstall ADE completely from Windows 7?
I have uninstalled it via Control Pane, or at least i thought I had. But when I reinstall it, it remembered all my previous details!!! (One of which is now incorrect!)
That sure is some uninstall program!
How clever of Adobe to have an uninstall program that doesn’t actually uninstall!!!
It is doing my head in

How to switch between messages in the BlackBerry Hub

With the release of BlackBerry 10 version 10.1, we’ve added a new gesture to the BlackBerry Hub that allows you to quickly switch between your next and previous messages. It’s simple: while viewing a message drag your finger from the left to the right and in one continuous motion swipe up or down.
For example, in the following screenshot you’ll notice I am viewing ‘Test 08”. To get to the next message, “Test 09”, all I need to do is swipe from left to right (red arrow) followed by swiping up (green arrow) in a single motion. To switch to the previous message, “Test 07”, I complete the same gesture, but swipe down instead (blue arrow).
Tip: Using a BlackBerry Q10 or Q5? On top of using this gesture to switch between messages, you also have the option of pressing the N key to view your next message, or the P key to view a previous message.
If this gesture doesn’t appear to be working on your device, verify you are using BlackBerry 10.1.0.4181 or later by going to Settings > About and reviewing the OS Version field. If the OS Version is lower than 10.1.0.4181, check for updates by going to Settings > Software Updates.
For more details about the availability of BlackBerry 10.1, check out Inside BlackBerry’s post on BlackBerry 10 Software Updates.
VIA | helpblog.blackberry.com
http://helpblog.blackberry.com/2013/10/how-to-switch-between-messages-in-the-blackberry-hub/
Please thank those who help you by clicking the button.
If your issue has been solved, please resolve it by marking "Accept as Solution"

I would set up a variable before you get to that node, lets call it $EmpID and assign to it the value of the prompt you want to play lets say 12345 which would be the library promptID. It will then play prompt, get digits, and once you validate if it goes through the expression that flags it as invalid, in that node re-declare the variable, but this time give it the value of the new prompt you want to play, then sent it back to the node which will then play the new prompt and collect the digits.

How to switch off screen while playing songs in 5G iPod

Any ideas how to switch off the screen completely (not just reducing the brightness) while playing the songs.
i'm thinking that this could improve the battery life !!!
30GB Video iPod Windows XP Pro

No you can not do this; you can only turn off the Backlight.

HT201209 Please help, tried to redeem an App Store gift card for $15.00. It worked when I put it in earlier but I was still charging purchases to my credit card. I did not see how to switch over to the gift card. Credit is gone and code now invalid. W

I need help with redeeming a $15 App Store certificate. I tried to redeem earlier in the day and it was credited to my account. I could not figure out how to switch payment from my credit card to the gift card credit. Later on in the day I see the credit is completely gone and now the card is invalid. Nothing was purchased with the gift card so I want to know where the credit went. I also have$5 credited to my Apple ID from a past gift card that I can't access. What can I do. Is there a customer service number???

To Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact

How to switch to french keyboard

Hi guys! im a new mac user and i'm completly lost right now....actually starting to think that it was a bad idea to get a macbook!! anyways....can u tell me how to switch to a french keyboard on this thing??

in the preferences tab you will see keyboard, and then you can change it to be in french instead of english... and if need be you can pop out the keys and move them around to how you are used to...

How to switch back to LAN?

Bought a M10 Valet.
Connected to a desktop via LAN. Then, we switched to wireless. How to switch back to LAN cable?
Thanks.

Spoiler (Highlight to read)
Desktop has both wireless and cable capability. I was running cable direct without router or modem. Bought M10 and installed easily.
Then, I discovered that router is running wireless to desktop. WAnted to return to cable for the desktop for security reasons.
Issue: How to tell the M10 to run internet thru cable, and not wireless?
Is it possible to tell router to do that for desktop alone? Or, must I disable wireless completely?
M10 has no button or software control to switch between wireless and cable. What is that button the top of the router?

I have problems in communication between my notebook and Epson printer. It goes offline everytime I unplug it from the notebook and there is no way how to switch it on. Although the printer is recognized and scanning is not a problem. Any solution?

I have problems in communication between my notebook and Epson printer. It goes offline everytime I unplug it from the notebook and there is no way how to switch it on. Although the printer is recognized and scanning is not a problem. Any solution?

this is exactly the kind of response i expected, almost begged support to please not do this to me and yet there it is another meaningless, non helpful, standard template response to restart my apple tv.
this does NOT work which is why i am contacting you. i have tried all suggestions about unplugging and restarting and nothing works.
i live in an apartment and logon to the provided wifi wireless. so i do not have access to a router. however, management says they have talked with their provider and have been assured that the required ports are available.
remember all the jokes about how bad windows was because the solution was always to re boot. funny huh? how is apple any different.
i have been to the local apple care store and they are clueless, too.
should we just end it here and you admit that i will not be getting any support from apple on this one? i got the ipad because my kids were such big fans. it is difficult for me to share their enthusiasm.
at this point i am just curious about how you say you cannot support your own product so i can complete my file on this contact.
thanks...sorry it was you who got this problem..

How to switch off automatic creation of the business partner?

Hello!
Advise please why in erp after creation of the customer automatically form business partner? How to switch off automatic creation of the business partner? It very much disturbs, because business partner are created from crm. Because of automatic creation business partners are duplicated.

Hi,
I have made the following customizing settings to activate customer integration with business partner, but the problem is when I create a BP with a role (FI-Customer) the customer is not created automatically.
1. Set BP Role Category for Direction BP to Customer
Roles: FLCU00 - Business Partner FI Customer (FS: BP)
FLCU01 - Business Partner Customer (FS: BP)
2. Defined the Number assignment for Direction BP to customer
4. Customer account group and numbering is also defined.
3. Created a BP with BP Role FLCU00, I can see the Customer - General Data tab, but no customer was automatically generated by the system.
Kindly let me know if any customizing I have missed.
Regards
Ameya

How do I apply programmatic skins for completely custom drawn components of a Flex library project?

Hello folks,
I am looking for best practices advice when (1) creating
custom components and (2) styling and skinning.
I already know how to skin a component part of the Flex
framework. I can make a class extending ProgrammaticSkin and have
my component skinned using CSS to link the component with the
reference to my custom class.
However what about those cases when you are completely
creating a component from scratch?
Imagine a "Freehand Drawing Canvas" component that allows the
user to draw on it and has some buttons to set color styles, line
styles, etc., or imagine a "Screen Flow Gallery" component that
displays visual objects in a fashion similar to Cover Flow in the
Mac.
In many components I am aware you may reuse other components
part of the Flex framework but I am trying to picture an scenario
where you would need to draw everything yourself because there just
isn't something to base it upon so you will end up drawing it from
scratch.
To learn how instead of building one of those components I
mentioned previously I decided to start with something simple that
would illustrate this like a LiteButton component that will behave
just like the Flex mx.controls.Button but will extend UIComponent
and be completely custom drawn.
The component will have a default look and will also be
style-able and skin-able. I will provide styles for users of the
component to modify and regarding skinning anyone can create a
custom ProgrammaticSkin adding its own drawing logic and link it to
the component via CSS with the ClassReference applied to the skin
selector.
So far so good and it's clear what I want to achieve. I
actually know how to do most of the stuff here but I have one
single problem.
Here is my question, where should I put my custom drawing
logic? If I do it in the updateDisplayList inside the class
extending UIComponent it works, however I thought that it would be
a better practice to do it using programmatic skins, that way I
could provide different skin themes for my component set.
The problem is that I can't make the programmatic work in
this scenario. I tried instantiating the custom programmatic skin
during the updateDisplayList of the LiteButton component and adding
it to my display object via addChild but that didn't do anything. I
also tried creating a "default.css" stylesheet and tried to use
ClassReference as I would normally do to skin an already existing
component (or composite component as well) but that didn't do
anything either.
So how do I apply programmatic skins for completely custom
drawn components of my Flex library project?
I could do it inside the updateDisplayList of the LiteButton
class extending UIComponent but again I would like to provide
different theme sets for my components so it makes sense using
programmatic skins.

"jbucaran" <[email protected]> wrote in
message
news:[email protected]...
> Hello folks,
>
> I am looking for best practices advice when (1) creating
custom components
> and
> (2) styling and skinning.
>
> I already know how to skin a component part of the Flex
framework. I can
> make
> a class extending ProgrammaticSkin and have my component
skinned using CSS
> to
> link the component with the reference to my custom
class.
>
> However what about those cases when you are completely
creating a
> component
> from scratch?
>
> Imagine a "Freehand Drawing Canvas" component that
allows the user to draw
> on
> it and has some buttons to set color styles, line
styles, etc., or imagine
> a
> "Screen Flow Gallery" component that displays visual
objects in a fashion
> similar to Cover Flow in the Mac.
>
> In many components I am aware you may reuse other
components part of the
> Flex
> framework but I am trying to picture an scenario where
you would need to
> draw
> everything yourself because there just isn't something
to base it upon so
> you
> will end up drawing it from scratch.
This may help with that
http://livedocs.adobe.com/flex/3/html/help.html?content=skinstyle_3.html
> To learn how instead of building one of those components
I mentioned
> previously I decided to start with something simple that
would illustrate
> this
> like a LiteButton component that will behave just like
the Flex
> mx.controls.Button but will extend UIComponent and be
completely custom
> drawn.
>
> The component will have a default look and will also be
style-able and
> skin-able. I will provide styles for users of the
component to modify and
> regarding skinning anyone can create a custom
ProgrammaticSkin adding its
> own
> drawing logic and link it to the component via CSS with
the ClassReference
> applied to the skin selector.
>
> So far so good and it's clear what I want to achieve.
Actually after
> playing
> with the weekend and today I know how to do most of the
stuff but I have
> one
> single problem. So here is my question, where should I
provide my custom
> drawing logic? If I do it in the updateDisplayList
inside the class
> extending
> UIComponent it works, however I thought that it would be
a better practice
> to
> do it using programmatic skins, that way I could provide
different skin
> themes
> for my component set.
These aren't mutually exclusive. When you provide a skin with
a
TypeSelector, you have to add it to the display list
somewhere, and this is
typically done in updateDisplayList or addChildren. I prefer
to do it in
updateDisplayList, because you can then change it if the
style changes.
> The problem is that I can't make the programmatic work
in this scenario. I
> tried instantiating the custom programmatic skin during
the
> updateDisplayList
> of the LiteButton component and adding it to my display
object via
> addChild but
> that didn't do anything.
Exactly what did you do?
> I also tried creating a "default.css" stylesheet and
> tried to use ClassReference as I would normally do to
skin an already
> existing
> component (or composite component as well) but that
didn't do anything
> either.
I've never had any problem using an approach similar to
this...but I will
say that I couldn't see any advantage in creating a
default.css style sheet,
since it's not really default in the way that the one that
comes with Flex
is. It's much more obvious to anyone using your component
what's going on
there if you create a style sheet where they're likely to
spot it.
> So how do I apply programmatic skins with the default
look for custom
> drawn
> components?
It seems like your approach is fine, but maybe you've made a
mistake in your
implementation.
> I could do it inside the updateDisplayList of the
LiteButton class
> extending
> UIComponent but again I would like to provide different
theme sets for my
> components so it makes sense using programmatic skins.
You might want to consider also adding an instance of
HaloBorder to your
component. That brings a lot of functionality with it.
HTH;
Amy

ASA 5505 8.4. How to configure the switch to the backup channel to the primary with a delay (ex., 5 min) using the SLA?

I have ASA 5505 8.4. How to configure the switch to the backup channel to the primary with a delay (for example 5 min.) using the SLA monitor?
Or as something else to implement it?
My configuration for SLA monitor:
sla monitor 123
type echo protocol ipIcmpEcho IP_GATEWAY_MAIN interface outside_cifra
num-packets 3
timeout 3000
frequency 10
sla monitor schedule 123 life forever start-time now
track 1 rtr 123 reachability

Hey cadet alain,
thank you for your answer :-)
I have deleted all such attempts not working, so a packet-trace will be not very useful conent...
Here is the LogLine when i try to browse port 80 from outside (80.xxx.xxx.180:80) without VPN connection:
3
Nov 21 2011
18:29:56
77.xxx.xxx.99
59068
80.xxx.xxx.180
80
TCP access denied by ACL from 77.xxx.xxx.99/59068 to outside:80.xxx.xxx.180/80
The attached file is only the show running-config
Now i can with my AnyConnect Clients, too, but after connection is up, my vpnclients can't surf the web any longer because anyconnect serves as default route on 0.0.0.0 ... that's bad, too
Actually the AnyConnect and Nat/ACL Problem are my last two open Problems until i setup the second ASA on the right ;-)
Regards.
Chris

How to switch to ADE 1.6 - complete install guide with pictures

Similar Messages

Maybe you are looking for