How to switch to German language (Internationalization) of SES

Hi everyone,
How can I make my UI of SES to appear in german language. I have already installed 10.1.8.4 Oracle SES in English.
Thanks
Saikrishna

At installation time you get to choose the languages to be installed. If you didn't choose German at that point, I don't think it's possible to add further languages without reinstalling.
After that it uses the browser language setting to choose what language to use for the UI.

Similar Messages

  • How to switch to different languages at EP7.0

    We have a need to enable the EP7.0 users to switch languages (between ENnglish and French) on EP.
    There should be a link in the masthead area to let her selecting the desired language.
    Please inform us how to achieve this.   Thanks a lot!

    Hi there are a few areas which would require you to manage languages within the portal:
    1.) As mentioned your portal personalization options can be enabled per user to allow for global language management.
    2.) The portal has 3 main areas to manage content
          -  Header menu area (Translation is managed within the portal)
          -  Navigational menu area (Translation is managed within the portal)
          -  Content menu area ((Managed outside the portal usually) since these are generally served from other systems the prerequisite is that you have the language packs installed on the sytems called for which ever application - in some cases translation content will be stored in the repositories called for by the portal i.e BSP applications/IAC's/Transactions etc.)
    For each of these areas there are some changes you perform to manage translations to your own content should it not have the default SAP language translations available for your texts (or no language pack available at all). See the following link:
    http://help.sap.com/saphelp_nw2004s/helpdata/EN/74/641640b7b6dd5fe10000000a155106/content.htm
    Generally BASIS will have to install the language packs you wish to have in the systems and enable them. This solution adresses situations where lanuage packs are not available or specific portal texts are not translated correctly and you need to translate them yourself. I trust this will serve your needs.
    here is a link defining how basis install on Thai language would be done within a system:
    http://www.sap-img.com/basis/thai-language-pack-for-sap.htm

  • How to switch the keyboard language when using a bluetooth keyboard?

    When using the on-screen keyboard I have the little globe to switch languages, but when using a bluetooth keyboard the on-screen keyboard is hiden.
    I want to be able to write in different languages using the bluetooth keyboard, also the auto-correct gets in the way if I write in a different language than english and it tries to change the words to the closest similar english word.
    Help!

    I see that now Tom, I'm sorry to confuse things.  I think my problem might have been that I had the keyboard too far away from the phone, and so when I looked back from the keyboard to the phone, the screen indication of the languages had already disappeared from the screen.  Because I have more than one language with Roman characters installed, I thought that no change was occurring from that sequence of commands, since I wasn't getting Korean.  But now that I see your correction, and watch the screen closely, I see that you're right.  I apologize.  (And of course, I'm grateful to have a simpler way of switching languages!)

  • Active Adobe Creative Suite Master Collection / Key for English Version / Use in German Language

    Hello Supporters,
    I've successfully downloaded and installed Adobe Creative Suite 6 Master Collection as Test-Version.
    Today I've got my activation key and activated the version successfully.
    Since we live in Austria and want to use the products in German language, I found some related articles how to change the interface to german.
    That is quite easy and works, but... if I switch to German the products want to get activated again.
    Please give me note how to switch to German, not loosing the activation.
    Thanks.
    Best Regards.
    Lukas

    you can't.
    Order product | Platform, language swap
    Mylenium

  • How can I change the language of video trailers on iPad?

    My trailers are in German even though I chose English as UI language. I cannot watch the trailers in original language English. This is very annoying. How can I ban German language completely from my iPad?

    Try Apple/command plus space.

  • I want to change german language to english language.

    hi i  am a student.when i am getting any run time error then its coming in german language.so i am not gettng whats the problem?
    so can anyone guide me how to change the german language to english language?
    Moderator message: please search for available information/documentation.
    Edited by: Thomas Zloch on May 29, 2011 12:44 PM

    HI,
    please go through the below link
    Short Dump language change
    Hope this will help you.
    Regards,
    Kiran

  • X7: where to find German language for Swype?

    I know that I can install Swype onto my X7 via Ovi store. But how can I get German language support for Swype installed? I managed to install it on my C7 a few months ago, but now it seems to have disappeared from the Nokia Beta Labs site......or did I just not look in the right places?

    farby wrote:
    ..or just check the last post by FuRCoM
    http://forum.dailymobile.se/index.php?topic=29147.150
    German language was never officially supported - but you could get it thru Beta Labs and it worked fine (on my C7). Now it was removed from Beta Labs - why?
    The link that you sent points to an older version - I already tried this out but when changing language to German it says "...update from Ovi store needed...." - and then there is no update on Ovi store.
    Like in many other cases - I do not at all understand Nokia's strategy here. For me, Swype is the only way to survive a touchscreen - without support for my native language, the X7 will go back to the dealer. Other manufacturers include Swype BY DEFAULT !

  • HT4972 my ipad switched to German! How do I get it back to English?

    My iPad switched to German while I was synching it to my computer. How do i get it back to English?

    Setttings > General > International > Language > English / Region Format
    If it is the keyboard: Settings > General > Keyboard > International Keyboard > English

  • Deskjet 3520 switch to german from english how can i get english back

    mydeskjet3520has been switched to german in the small viewing/instruction screen how do i get back to english

    Hi there,
    The easiest way would be to take it to Germany and ask someone there.  Sorry - bad joke.
    On the printer display, select Settings, and then select Preferences. Select your language, and then region from the options provided.
    Of course, it will be in German, and I'm not positive what that will look like - but it might be be Einstellungen = Settings, then Voreinstellungen = Preferences and Sprache = language.  From there, you should be able to find the US and English.
    Thanks!
    Tara
    **Although I am an HP employee, I am speaking for myself and not for HP.

  • How can I replace the trial version of Final cut in german language in another in english?

    Hi, I downloaded from this address, http://www.apple.com/it/finalcutpro/trial/
    the trial version of Final Cut.
    When I opened the program, I discovered that it was a version in german language.
    Before to buy the programm, from the trial version I would like understand better how it works.
    Many thanks.
    Alessandro

    FCPX has 5 languages internally:
    English, French, German, Japanese, Chinese (no Italian nor Spain) ...
    It switches automatically to your System's pref language ..
    Another option is this handy tool (for free):
    http://www.tj-hd.co.uk/en-gb/languageswitcher/
    which allows to set any app to any built-in language, indepentdently of OS-language ...
    == Tom beat me by the minute ==

  • HT4007 How to switch the language?

    Hello all, could you help me? I got into a trouble, I dont know how but the lenguage of my Aperture switched to German and I cant figure it out how to solve this problem.
    Best Regards
    JCharlesL

    Aperture will use the language that is set in the System Preferences, in the "Language & Region" tab.
    Quit Aperture and other open apps..
    Launch System Preferences and open the Language & Region" tab.
    Drag the language you want to the top of the list of preferred languages. Aperture only supports English, French, German, Japanese, Chinese. Pick one of these languages.
    Then close the panel and restart your Mac. Relaunch Aperture. 

  • How can I watch movies in germany with native tone, english? Any one knows how to switch the language when renting a movie?

    How can I watch movies in germany with native tone, english? Any one knows how to switch the language when renting a movie?

    I wonder the Format Tables macros on my site could be adapted?
    http://www.grainge.org/pages/authoring/word/word_macros.htm
    If not, I have used Macro Express to format tables in Rh. No reason it could not be used in Word.
    See www.grainge.org for RoboHelp and Authoring tips
    @petergrainge

  • How to identify german language in a program

    Hi All,
    i have one requirement. that is how to identify german language in a program.(suppose text elements, data elements are in german language our program should identify that german language). Anybody have solution for this, pls send me as soon as possible.
    Thanks for all in advance.
    Thanks & Regards,
    Nagarjuna.

    Hi Nagarjuna,
    2 possible approaches:
    1. Source language: Every program is initially created with source language = logon language. Sored in TRDIR-RLOAD.
    2. Try to read program texts in specific language (DE).
        READ TEXTPOOL pv_repid INTO lt_textpool LANGUAGE 'D'.
        IF sy-subrc                           = 0.
          MESSAGE s000(R1)
            WITH 'German texts present in' pv_repid '' ''.
        ELSE.
    Regards,
    Clemens

  • I keep getting the iTunes help screen in German Language on restart, how do I stop this?

    Ugraded to iTunes 10.5 and now on restart I keep getting the iTunes help screen in German Language how do I stop this?

    Hi Thanks,
    I could only see posts from some months ago and thought I had something different.
    Looks like I have not been using the correct search terms.
    Will wait and see what happens.

  • I have installed Itunes on my laptop. However, the apple store opens in German language. I need it in English. How can i change the language for istore through the itunes?

    I have installed Itunes on my laptop. However, the apple store opens in German language. I need it in English. How can i change the language for istore through the itunes?

    Go to the bottom of the page, click the flag, then select your country.

Maybe you are looking for

  • Help I keep getting  a configuration error message

    Every new document I create gives me the following message when I try to preview **Error** C:\Documents and Settings\wozZonline\Local Settings\Application Data\Macromedia\Flash 8\en\Configuration\Classes\FP8\TextField\StyleSheet.as: Line 7: The name

  • Need Windows 7 and Outlook 2010 Sync help

    I am attempting to HotSync my calendar from Outlook 2010 onto my Centro and I am not successful.  What am I missing???? I have Desktop Manager V.6.2.2, Hotsync Manager v. 7.0.2, Palm Garnet OS v.5.4.9 and each time I connect I get a message that hots

  • How to schedule a service to run before network goes down

    Hi I wrote a new smf service and added it to the repository. When running with "stop" (when the system goes down) it sends an alert to another machine. My question is : How can I schedule that service to run just before network services go down? anot

  • Photoshop elements 8 slideshow crashes

    I created a new slideshow.  I was ready to put it to "outPut" and it crashed.  When I go back into it, everyting is still there but when I try to do anything like "play", it crashes.  The other slideshows are okay when open them up.  What happened.

  • Looking for a filter (or methode) to eliminate echo

    I made an audio record in a big hall (or church) with only spoken text thus much to much echo... Now I am looking for a filter (or methode) to eliminate that echo. I tried all the audio-options in fcpX but could not find one. The speech-echo has to r