How to sync data after iphone 5s is activated
Received my new Iphone 5s today. Currently had Iphone 4s. Went through the set up but when it got to the syncing of my data from my old phone through Icloud it wouldn't allow me to because the 5s phone ios version was 7.0.6 and my 4s has the new version 7.1 I did download the new version onto the 5s but now not sure how to sync all my info. I did have a current backup of Icloud on the 4s. Any suggestions appreciated
If you've iPhone 4s iCloud backup and you also have updated your iPhone 5s to IOS 7.1.
1. Connect your iPhone 5s to the wall power supply with the supplied adapter.
2. Make sure your iPhone 5s is connected to your Wi-fi router.
3. Use iPhone 5s Settings > General > Reset > Erase All Content & Settings to wipe your iPhone and set it up again as new, at the end of the procedure choose restore from iCloud backup.
iCloud Restore:
http://support.apple.com/kb/TS4036
Similar Messages
-
HT4890 how to sync photos from iphone to ipad?
how to sync photos from iphone to ipad?
Winston Churchill wrote:
Enable photo stream synchronisation on both devices in settings> iCloud. Note; only photos taken after synchronisation is enabled will be added to photo stream.
To sync any photos that are not part of photo stream, you will need to sync the photos to your computer via iTunes first and then to the other device.
WC, will this work from photostream on my computer too? I just turned photo stream on on my computer. Thank you. Liz -
How to stored data after clicking checkbox save in database table
TYPE-pools: slis.
tables:mkpf,mseg,mard,COWB_COMP.
TYPES: BEGIN OF tp_data,
mblnr LIKE mseg-mblnr,
matnr LIKE mseg-matnr,
werks LIKE mard-werks,
lgort LIKE mard-lgort,
lgpbe LIKE mard-lgpbe,
charg LIKE mseg-charg,
bwart LIKE mseg-bwart,
budat LIKE mkpf-budat,
menge LIKE mseg-menge,
meins LIKE mseg-meins,
kostl LIKE mseg-kostl,
aufnr LIKE mseg-aufnr,
rsnum LIKE mseg-rsnum,
endkz like COWB_COMP-endkz,
END OF tp_data,
tp_tbl_data TYPE STANDARD TABLE OF tp_data.
*data: t_data like ztable occurs 0 with header line.
Constants
Data objects (variable declarations and definitions)
Report data to be shown.
DATA: it_data TYPE STANDARD TABLE OF tp_data.
Heading of the report.
DATA: t_heading TYPE slis_t_listheader.
========================== Selection Screen ==========================
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
SELECT-OPTIONS:smblnr FOR mseg-mblnr MODIF ID m1,
smatnr FOR mseg-matnr MODIF ID m2,
swerks FOR mard-werks MODIF ID m3,
slgort FOR mard-lgort MODIF ID m4,
slgpbe FOR mard-lgpbe MODIF ID m5,
scharg FOR mseg-charg MODIF ID m6,
sbwart FOR mseg-bwart MODIF ID m7,
skostl FOR mseg-kostl MODIF ID m8,
saufnr FOR mseg-aufnr MODIF ID m9,
srsnum FOR mseg-rsnum MODIF ID m10.
SELECTION-SCREEN END OF BLOCK b1.
SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME TITLE text-002.
PARAMETERS:pre RADIOBUTTON GROUP radi USER-COMMAND ucomm DEFAULT 'X',
pse RADIOBUTTON GROUP radi,
bps RADIOBUTTON GROUP radi.
SELECTION-SCREEN END OF BLOCK b2.
SELECTION-SCREEN BEGIN OF BLOCK b3 WITH FRAME TITLE text-003.
PARAMETER:layout TYPE i.
SELECTION-SCREEN END OF BLOCK b3.
=========================== Event Blocks =============================
AT selection-SCREEN.
start-OF-selection.
PERFORM get_data USING it_data.
END-OF-selection.
PERFORM build_alv USING it_data t_heading.
=========================== Subroutines ==============================
*& Form get_data
Gets the information to be shown in the report.
FORM get_data USING t_data TYPE tp_tbl_data.
SELECT msegmblnr msegmatnr mardwerks mardlgort mardlgpbe msegcharg msegbwart mkpfbudat
msegmenge msegmeins msegkostl msegaufnr mseg~rsnum
INTO CORRESPONDING FIELDS OF TABLE t_data
FROM mseg
JOIN mard ON mardmatnr EQ msegmatnr
JOIN mkpf ON msegmblnr EQ mkpfmblnr
WHERE mseg~matnr IN smatnr.
ENDFORM. " get_data
*& Form build_alv
Builds and display the ALV Grid.
FORM build_alv USING t_data TYPE tp_tbl_data
t_heading TYPE slis_t_listheader.
ALV required data objects.
DATA: w_title TYPE lvc_title,
w_comm TYPE slis_formname,
w_status TYPE slis_formname,
x_layout TYPE slis_layout_alv,
t_event TYPE slis_t_event,
t_fieldcat TYPE slis_t_fieldcat_alv,
t_sort TYPE slis_t_sortinfo_alv.
REFRESH t_fieldcat.
REFRESH t_event.
REFRESH t_sort.
CLEAR x_layout.
CLEAR w_title.
Field Catalog
PERFORM set_fieldcat2 USING:
1 'MBLNR' 'MBLNR' 'MSEG' space space space space space space space space space space space space t_fieldcat ,
2 'MATNR' 'MATNR' 'MSEG' space space space space space space space space space space space space t_fieldcat ,
3 'WERKS' 'WERKS' 'MARD' space space space space space space space space space space space space t_fieldcat,
4 'LGORT' 'LGORT' 'MARD' space space space space space space space space space space space space t_fieldcat ,
5 'LGPBE' 'LGPBE' 'MARD' space space space space space space space space space space space space t_fieldcat ,
6 'CHARG' 'CHARG' 'MSEG' space space space space space space space space space space space space t_fieldcat ,
7 'BWART' 'BWART' 'MSEG' space space space space space space space space space space space space t_fieldcat,
8 'BUDAT' 'BUDAT' 'MKPF' space space space space space space space space space space space space t_fieldcat,
9 'MENGE' 'MENGE' 'MSEG' space space space space space space space space space space space space t_fieldcat,
10 'MEINS' 'MEINS' 'MSEG' space space space space space space space space space space space space t_fieldcat,
11 'KOSTL' 'KOSTL' 'MSEG' space space space space space space space space space space space space t_fieldcat,
12 'AUFNR' 'AUFNR' 'MSEG' space space space space space space space space space space space space t_fieldcat,
13 'RSNUM' 'RSNUM' 'MSEG' space space space space space space space space space space space space t_fieldcat,
14 'ENDKZ' 'ENDKZ' 'COWB_COMP' space space 'select' 'Select this row' 'Sel' 'Select this row' space space space 'X' 'X' space t_fieldcat.
Layout
x_layout-zebra = 'X'.
Top of page heading
PERFORM set_top_page_heading USING t_heading t_event.
Events
PERFORM set_events USING t_event.
GUI Status
w_status = ''.
User commands
w_comm = 'USER_COMMAND'.
Order
Example
PERFORM set_order USING '<field>' 'IT_DATA' 'X' space space t_sort.
PERFORM set_order USING 'MBLNR' 'IT_DATA' 'X' space 'X' t_sort.
PERFORM set_order USING 'EBELN' 'IT_DATA' 'X' space 'X' t_sort.
PERFORM set_order USING 'EBELP' 'IT_DATA' 'X' space space t_sort.
Displays the ALV grid
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_callback_program = sy-repid
it_fieldcat = t_fieldcat
is_layout = x_layout
it_sort = t_sort
i_callback_pf_status_set = w_status
i_callback_user_command = w_comm
i_save = 'X'
it_events = t_event
i_grid_title = w_title
TABLES
t_outtab = t_data
EXCEPTIONS
program_error = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM. " build_alv.
*& Form set_top_page_heading
Creates the report headings.
FORM set_top_page_heading USING t_heading TYPE slis_t_listheader
t_events TYPE slis_t_event.
DATA: x_heading TYPE slis_listheader,
x_event TYPE LINE OF slis_t_event.
Report title
CLEAR t_heading[].
CLEAR x_heading.
x_heading-typ = 'H'.
x_heading-info = 'Reporte Prueba'(001).
APPEND x_heading TO t_heading.
Program name
CLEAR x_heading.
x_heading-typ = 'S'.
x_heading-KEY = 'Program: '.
x_heading-info = sy-repid.
APPEND x_heading TO t_heading.
User who is running the report
CLEAR x_heading.
x_heading-typ = 'S'.
x_heading-KEY = 'User: '.
x_heading-info = sy-uname.
APPEND x_heading TO t_heading.
Date of execution
CLEAR x_heading.
x_heading-typ = 'S'.
x_heading-KEY = 'Date: '.
WRITE sy-datum TO x_heading-info.
APPEND x_heading TO t_heading.
Time of execution
CLEAR x_heading.
x_heading-typ = 'S'.
x_heading-KEY = 'Time: '.
WRITE sy-uzeit TO x_heading-info.
APPEND x_heading TO t_heading.
Top of page event
x_event-name = slis_ev_top_of_page.
x_event-FORM = 'TOP_OF_PAGE'.
APPEND x_event TO t_events.
ENDFORM.
*& Form set_events
Sets the events for ALV.
The TOP_OF_PAGE event is alredy being registered in
the set_top_page_heading subroutine.
FORM set_events USING t_events TYPE slis_t_event.
DATA: x_event TYPE LINE OF slis_t_event.
Example
clear x_event.
x_event-name = .
x_event-form = .
append x_event to t_event.
ENDFORM.
*& Form set_order
Adds an entry to the order table.
FORM set_order USING p_fieldname p_tabname p_up p_down p_subtot
t_sort TYPE slis_t_sortinfo_alv.
DATA: x_sort TYPE slis_sortinfo_alv.
CLEAR x_sort.
x_sort-fieldname = p_fieldname.
x_sort-tabname = p_tabname.
x_sort-UP = p_up.
x_sort-down = p_down.
x_sort-subtot = p_subtot.
APPEND x_sort TO t_sort.
ENDFORM. "set_order
*& Form set_fieldcat2
Adds an entry to the field catalog.
FORM set_fieldcat2 USING p_colpos p_fieldname p_ref_fieldname p_ref_tabname
p_outputlen p_noout
p_seltext_m p_seltext_l p_seltext_s p_reptext_ddic p_ddictxt
p_hotspot p_showasicon p_checkbox p_edit
p_dosum
t_fieldcat TYPE slis_t_fieldcat_alv.
DATA: wa_fieldcat TYPE slis_fieldcat_alv.
CLEAR wa_fieldcat.
General settings
wa_fieldcat-fieldname = p_fieldname.
wa_fieldcat-col_pos = p_colpos.
wa_fieldcat-no_out = p_noout.
wa_fieldcat-HOTSPOT = p_hotspot.
wa_fieldcat-CHECKBOX = p_checkbox.
wa_fieldcat-ICON = p_showasicon.
wa_fieldcat-do_sum = p_dosum.
Set reference fieldname, tablenam and rollname.
If p_ref_tabname is not given, the ref_fieldname given is a data element.
If p_ref_tabname is given, the ref_fieldname given is a field of a table. In case ref_fieldname is not given, it is copied from the fieldname.
IF p_ref_tabname IS INITIAL.
wa_fieldcat-rollname = p_ref_fieldname.
ELSE.
wa_fieldcat-ref_tabname = p_ref_tabname.
IF p_ref_fieldname EQ space.
wa_fieldcat-ref_fieldname = wa_fieldcat-fieldname.
ELSE.
wa_fieldcat-ref_fieldname = p_ref_fieldname.
ENDIF.
ENDIF.
Set output length.
IF NOT p_outputlen IS INITIAL.
wa_fieldcat-outputlen = p_outputlen.
ENDIF.
Set text headers.
IF NOT p_seltext_m IS INITIAL.
wa_fieldcat-seltext_m = p_seltext_m.
ENDIF.
IF NOT p_seltext_l IS INITIAL.
wa_fieldcat-seltext_l = p_seltext_l.
ENDIF.
IF NOT p_seltext_s IS INITIAL.
wa_fieldcat-seltext_s = p_seltext_s.
ENDIF.
IF NOT p_reptext_ddic IS INITIAL.
wa_fieldcat-reptext_ddic = p_reptext_ddic.
ENDIF.
IF NOT p_ddictxt IS INITIAL.
wa_fieldcat-ddictxt = p_ddictxt.
ENDIF.
Set as editable or not.
IF p_edit IS NOT INITIAL.
wa_fieldcat-INPUT = 'X'.
wa_fieldcat-EDIT = 'X'.
ENDIF.
APPEND wa_fieldcat TO t_fieldcat.
ENDFORM. "set_fieldcat2
=========================== Subroutines called by ALV ================
*& Form top_of_page
Called on top_of_page ALV event.
Prints the heading.
FORM top_of_page.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
i_logo = 'XXXXX'
it_list_commentary = t_heading.
ENDFORM. " alv_top_of_page
*& Form user_command
Called on user_command ALV event.
Executes custom commands.
FORM user_command USING r_ucomm LIKE sy-ucomm
rs_selfield TYPE slis_selfield.
ENDFORM. "user_command
this is my code, how to store data after clicking checkbox in databasetable,
how to write that cide.
plz send me code.hi!,
use MODIFY to update data into the data base table.
regards
anjali -
I have an nano - no clue how to sync it after everything downloaded. HEEEEEELP! I need a smart person to help me.
You might have better luck in the iPod Nano forum at https://discussions.apple.com/community/ipod/ipod_nano?view=discussions
-
Need help from the expert on how to sync sms on iphone to pc and how to make sure that sms on iphone is not being deleted - need to keep sms for office record purpose
You mean take the cover off of the iPhone, to look inside? I'd recommend against it. Even with warranty expired, you might qualify for an out-of-warranty service, which for 3GS is $149.
Other than that, any repair/service options are going to cost money. You might want to see if a wireless carrier will let you get a new contract & phone.
Out of curiousity, you're just using at as, basically, an iPod Touch, if there's no cell provider? Did I understand that correctly? -
How to sync music from iphone 4 to my macbook?
My macbook used to be my brothers and when i got an iphone 4 i sync most of his itunes on my iphone but recently he cleared everything off of my macbook. I have been buying songs off of itunes on my iphone ever since and i dont know how to sync from my iphone 4 to my macbook.
The sync is one way - computer to iphone. The iphone is not a backup/storage device. it simply mirrors the selected content of the computer to which you sync.
The exception is itunes purchases. Without syncing: File>Transfer Purchases
In some countries you can redownload some itunes purchases.
Downloading past purchases from the App Store, iBookstore, and iTunes Store -
How to read data after select multiple record by checkbox,
hi experts
i m using simple report with check box , and itab whcih contain records
how to read data after select multiple record by checkbox,
thanksHi Prashant,
Try using this logic.This Code displays the list with check boxes. When you check a checkbox and press a button say 'Select All' or 'De Select all' or 'Display'. It will read the data of those records.
DATA :
fs_flight TYPE type_s_flight,
fs_flight1 TYPE type_s_flight1.
* Internal tables to hold Flight Details *
DATA :
t_flight LIKE
STANDARD TABLE
OF fs_flight,
t_flight1 LIKE
STANDARD TABLE
OF fs_flight1.
SET PF-STATUS 'SELECT' .
PERFORM selection.
PERFORM displaybasic .
* AT USER COMMAND EVENT *
AT USER-COMMAND.
PERFORM selectall .
*& Form SELECTION
* Select query to reteive data from SPFLI table
* There are no interface parameters to be passed to this subroutine.
FORM selection .
SELECT carrid " Airline Code
connid " Flight Connection Number
FROM spfli
INTO TABLE t_flight.
DESCRIBE TABLE t_flight LINES w_lines .
ENDFORM. " SELECTION
*& Form DISPLAYBASIC
* Display the basic list with SPFLI data
* There are no interface parameters to be passed to this subroutine.
FORM displaybasic .
LOOP AT t_flight INTO fs_flight.
WRITE :
w_check AS CHECKBOX,
w_mark,
fs_flight-carrid UNDER text-001,
fs_flight-connid UNDER text-002.
ENDLOOP. " LOOP AT T_FLIGHT..
CLEAR fs_flight-carrid .
CLEAR fs_flight-connid.
ENDFORM. " DISPLAYBASIC
*& Form SELECTALL
* To check all the checkboxes with a 'selectall' push button
* There are no interface parameters to be passed to this subroutine.
FORM selectall .
CASE sy-ucomm.
WHEN 'SELECT_ALL'.
w_check = 'X'.
w_line = 4 .
DO w_lines TIMES.
READ LINE w_line .
MODIFY LINE w_line FIELD VALUE w_check .
ADD 1 TO w_line .
ENDDO. " DO W_LINES TIMES
CLEAR w_line.
WHEN 'DESELECTAL'.
w_check = space.
w_line = 4 .
DO w_lines TIMES.
READ LINE w_line FIELD VALUE w_mark .
IF w_mark = space .
MODIFY LINE w_line FIELD VALUE w_check .
ENDIF. " IF W_MARK = SPACE
ADD 1 TO w_line .
ENDDO. " DO W_LINES TIMES
WHEN 'DISPLAY'.
IF sy-lilli BETWEEN 4 AND w_lines .
DO w_lines TIMES.
READ LINE w_num FIELD VALUE w_check INTO w_check
fs_flight-carrid INTO fs_flight-carrid
fs_flight-connid INTO fs_flight-connid.
IF sy-subrc = 0.
IF w_check = 'X'
SELECT carrid
connid
fldate " Flight date
seatsmax " Maximum capacity in economy
seatsocc " Occupied seats in economy class
FROM sflight
INTO TABLE t_flight1
WHERE carrid = fs_flight-carrid
AND connid = fs_flight-connid.
LOOP AT t_flight1 INTO fs_flight1.
WRITE :
/ fs_flight-carrid UNDER text-001,
fs_flight-connid UNDER text-002,
fs_flight1-fldate UNDER text-007,
fs_flight1-seatsmax UNDER text-008,
fs_flight1-seatsocc UNDER text-009.
ENDLOOP.
ENDIF. " IF SY-SUBRC = 0
ENDIF. " IF W_CHECK = 'X'.
ADD 1 TO w_num.
ENDDO. " DO W_LINES TIMES
CLEAR w_check.
w_num = 0.
ELSE .
MESSAGE 'INVALID CURSOR POSITION ' TYPE 'E' .
ENDIF. " IF SY-LILLI BETWEEN..
ENDCASE. " CASE SY-UCOMM
ENDFORM. " SELECTALL
Much Regards,
Amuktha. -
How to sync contacts from iPhone back to ipad
How to sync contacts from iPhone back to ipad.
Using iCloud may be the easiest and in the long run will help keep them in synch.
http://www.apple.com/icloud/setup/ios.html -
HT1688 how to sync photos from iphone to computer
how to sync photos from iphone to computer
Pics taken with the iphone should be imported to your computer regularly as you would with any digital camera. they are not part of the sync process at all.
iOS: Importing personal photos and videos from iOS devices to your computer -
How to sync music from iPhone to my iPad
How to sync music from iPhone to iPad which is not purchased from iTunes
Import it to your iTunes library and sync it to your iPad with iTunes. To do this with iCloud you will need to import it to your iTunes library, then subscribe to iTunes Match.
-
have been syncing data from iMac to iphone without problems..
however, jus a couple of days ago - when syncing data on the "waiting for items to copy" step, nothing is happening and it jus stays that way with the sync arrows jus rotating on n on.... anyone can help??Since you can't sync her iphone4 to your OSX10.4, back up the old 3G manually to the PC and use this backup to restore from after you synced the new iphone for the first time using the PC.
To back up manually, disable autosync in iTunes on the PC, set up the iTunes account, connect the 3G and choose "backup" from the File menu or right click on it in the device list and hit backup. Save your purchases the same way by choosing "transfer purchases" this time.
Make sure to set up at least one contact and event on the PC to be able to merge contacts and calendars after the first sync of the 3G or the new iphone4. If you think about switching computers again some time in the future, you'll have to do this again in reverse with your new PC/Mac.
About backups and what is saved: http://support.apple.com/kb/HT1766 -
I have a video with extension .m4v which does not sync with my iphone. These are the properties of the video
MPEG-4 video file
128kbps
Low Complexity
Stereo
1572 kbps
480x360
H.264
I also have the same file in quicktime movie format. Even that file does not sync? I have specifically created this .m4v using itunes from a .mov file using "convert selection to apple tv". But, what ever I do, it does not sync with my iPhone. What am I doing wrong? Do I have to specifically export all my .mov files using "convert selection for ipod"?
I also tried the option "convert selection for ipod". This option does sync with my iPhone, but the video does not appear under Video. It does come under audio but not under video.
The first issue I need to resolve is how do I sync with iPhone.
The second issue I have is :
Is there a specific format that I can keep my movies, so that I can sync with both my apple tv, iphone and also play in itunes? I dont mind converting all my movies to one format, instead of retaining the movies in three different formats to play them on all three media.
-NagsThe data rate is too high -- 1500 is the max but 1000 is far safer (and most presets use under 1000).
Also, it sounds odd, but change the extension to MP4 when you convert it for iPod. Sometimes (maybe even a lot) the iPhone won't properly see an M4V extension as a movie. I know I have to convert all that I do with Handbrake to this extension.
I have both Apple TV and the iPhone and I use Handbrake for all my movie stuff. I convert using the iPhone preset but change the resolution to 640 (and turn autocrop on if I'm doing a widescreen movie). This plays perfectly on both the iPhone and Apple TV and, best of all, the quality is superb with small file sizes. I've run it on a 38inch TV and it looks to be as good or better than DVD in (it won't compare to HD but we're not talking HD here).
Even using the video cables (both composite and component) on the iPhone output the quality is terrific. I highly recommend this workflow. -
How to sync Contacts from iPhone to iCal or MobileMe?
I have ONE copy of Contacts that is correct: on my iPhone.
I really need to push the contacts from my iPhone to my empty MobileMe AddressBook or to my empty iCal AddressBook. I've spent an hour researching this on the Web. Does anyone know how to push the Contacts in this direction?
I had thought that iTunes Sync of Contacts was always two-way (KB article http://support.apple.com/kb/HT1386 says it is!); but apparently, with the iPhone, it is only one way (if a Mac Address Book or the MobileMe AddressBook is empty, the sync will wipe the contacts off the iphone).
Desperately need help. Thanks!OK, I finally got it fixed. And I figured out my missteps, too. Here you go (I tested it three times, and part of the testing procedure included deleting ALL data in MobileMe AND the AddressBook on my Mac):
Procedure for Pushing Good Set of Contacts on iPhone to all other platforms
Problem: Your iPhone has your only good set of contacts. Your iCal and MobileMe (cloud) contacts are not there or corrupted.
Complication: If you try to delete your corrupted MobileMe Contacts on the cloud in preparation for pushing the valid set of contacts from the iPhone up to the MobileMe cloud, the system tends to do a one-way sync and immediately delete all your iPhone contacts (the good set!).
Solution and procedure:
For starters, forget about iTunes. We are not going to use it at all for this procedure.
Back up Address Book on the Mac. OK, so this copy might be corrupted or incomplete; do it anyway: File, Export, Address Book Archive. It keeps your groups and their member sets, too.
Go into MobileMe Settings on your Mac, then to the Sync tab. Make sure sync is set to Manual. You can leave Sync turned on; it won't sync until you tell it to, because you just set it to Manual.
OK, we're assuming your iPhone has the best, correct set of AddressBook Contacts, Groups, and Group member lists.
So now put your iPhone in Airplane mode. MAKE ABSOLUTELY SURE YOU DO THIS!!!
On the iPhone, go to Settings, Mail, Contacts, Calendars, MobileMe, and turn OFF Contacts in Settings on iPhone. The iPhone should immediately give you a prompt. Make sure you press "Keep contacts on iPhone," NOT "Delete." (And if you don't get that message, something is wrong.)
Check to make sure Contacts and Groups are still there on iPhone. They should be. Double check to make sure your iPhone is in Airplane Mode.
Now open AddressBook on Mac and delete all Contacts AND all Groups. (You can always recover these from the earlier backup you made.)
Then delete ALL contacts in MobileMe on the Web.
MAKE SURE MAC ADDRESS BOOK AND MOBILEME ADDRESS BOOK ARE EMPTY.
Log off MobileMe.
Check to see that Contacts are still on the iPhone, and that there is only ONE set of groups. And you should still be in Airplane Mode!
On iPhone, turn back ON Contacts. You may get the message "The contacts you previously synced with your Mac will be merged with Mobile Me." (This message is a bit confusing, but don't worry about that.) (If you don't get that message, something is wrong.) Click on "Merge" to turn back ON Contacts on iPhone.
Take iPhone out of Airplane Mode.
Go to iPhone desktop, double press the black menu button, and close all Apps.
Now reboot iPhone immediately. (Very important! Procedure doesn't always work unless you do this.)
Once rebooted, check to see that Contacts are still there on the iPhone, and that there is only ONE set of groups. If AddressBook starts syncing while you're doing this, let it finish before you do anything else.
Now open MobileMe. Go to Contacts. The procedure should have synced the Contacts properly. If you see zero Contracts in the All Contacts group, go to a subgroup, and then back; or go to a different part of MobileMe (Calendar, etc.), and then come back to AddressBook. All your contacts should then appear in the full Address Book.
Log off MobileMe.
Open Address Book on Mac. It should still be empty. Close it.
Open MobileMe settings on Mac. Go to Sync tab. Click on Advanced button on bottom right. Select the current computer you're on and make SURE it stays selected.
Now click "Reset Sync data."
Change graphic of platform sync to "Cloud---->Computer."
Set "Replace" to Contacts.
Hit Replace.
This should immediately populate your AddressBook on your Mac with the correct info from the MobileMe cloud. Open AddressBook and make sure it did, and that the groups are there and populated.
Now, if all three platforms have correct info, you can go to MobileMe settings on Mac, Sync tab, and change it to "Synchronize with MobileMe automatically" to keep MobileMe and iCal on your Mac in sync. (MobileMe and your iPhone are already set up to sync automatically per earlier steps in this procedure.)
Now that you have a good copy of your Contacts and Groups in AddressBook on your Mac, backup it up. -
How to sync iCal between iPhone and MacBookPro without MobileMe?
Hello,
How can I sync iCal between iPhone and MacBookPro without MobileMe?
I'm still using MobileMe, but I will stop soon.
I'm using my iPhone in India a lot to create new events or to add new contacts. At the end of the day I would like to able to sync it with my MacBookPro without using MobileMe. Internet Connection is often very bad in that area. The iPhone I only use without UMTS and all that Data Transfering stuff. Best for me would be to sync directly by wire or Bluetooth if possible. If you have a solution with and without Internet Connection, that would be very helpfull to me.On the Mac, in iTunes with iPhone attached, click on the iPhone section. Go to the "info" tab. There you will see a list of items that can be synced. Make sure that "sync addressbook contacts" is checked, along with the appropriate choices under it.
Don't know what else to say, it works fine here.
Hope this helps. -
How to sync two separate iphone's to one computer without wiping and replacing libary?
my brother has an iphone 4 but needs updating, how can i plug his iphone into my computer where i have my own itunes libary without wiping his music, apps etc. with mine?
You can also *Transfer purchases from device* to copy all your purchased content into the new library. If you've got media on the phone that wasn't backed up from the old machine then you should probably take a look at this post from Zevoneer for options on moving your data back to a computer.
http://discussions.apple.com/message.jspa?messageID=11657508#11657508
tt2
Maybe you are looking for
-
What os can i install on my mac pro 1,1
I want to upgrade my OS and I just want to know how far I can upgrade. I have a Mac Pro 1,1 with 5gb RAM and 2x2.66Ghz Intel Xeon Dual-Core Processors. I'm currently running Snow Leopard 10.6.8.
-
Can't locate Power Nap on Late 2011 Macbook air
I've just upgraded to Moutain Lion and can't find the Power nap function anywhere. I have a new Air so I would expect to see it??? Is anyone else having this problem?
-
Configuring apps in sharepoint 2013 onpremises
Hi, we have a lab environment for sharepoint 2013 with 1) Domain controller (domain : test.local) 2) SharePoint server { SQL Server 2012 (full install), SharePoint 2013 (full install)} Now we would like to configure sharepoint 2013 apps in our enviro
-
My ipad screen has got locked. This is probably because a teenager tried to use the device in my absence. The passcode screen appears when I restart the device. But, does not respond to typing. How can I revive the device? The device was synced to i
-
BAPI_UI_GETDETAIL - switching it on and off?
Hi, a short question - since which R/3 release is BAPI_UI_GETDETAIL available? We had problems with a piece of software because apparently the BAPI is not available in (Kernel release) 4.6D and Partner release 4.6C. When I look into the transaction B