How to sync the apple mail with exchange servers?

Hello, I am trying to configure the Apple Mail app to sync the mailboxes with the corporate EXCHANGE SERVER. The mails did not sync as I click, Is anybody had the same problem? is there any special configuration?
vanderlei

Unlike Gmail, which is set up as either an IMAP or Exchange account, POP accounts will delete messages from the server when they are retreived by an email client, such as your iPhone.  The only way to keep them longer is to change the Delete From Server setting on your account (if present) to Never. (This is supported by many, but not all, POP accounts).  This is usually found on your phone in Settings>Mail,Contacts,Calendars>tap your POP account, tap Advanced (usually under Outgoing Mail Server), tap Delete from Server, set to Never.  As for the messages already deleted, unfortunately they can't be retreived at this point since they have in all likelihood already been deleted from your POP account's server.  Also, you can't recover them from your iPhone backup as the backup doesn't not contain email messages.

Similar Messages

  • Flag color sync in Apple Mail with Gmail and Yahoo?

    It appears that colored flags sync through iCloud for your @me.com email address. Is there a way to get the colored flags to sync across computers for a Yahoo or Google account? For example, if I flag an email in my Gmail account with a Green Flag on my Apple desktop computer in Apple Mail, is there a way to get the flag to show up as Green on my laptop in Apple Mail? Currently, the fact that the email is flagged syncs across computers and accounts, but not the particular color of the flag. Also, highlighting an email a certain color does not appear to sync, even for my @me.com account. And lastly, now that Apple has switched from Mobile Me to iCloud, they have given up Mail Rule syncing... is there a way to get my Apple Mail Rules to sync between computers? Thanks!

    Upon further investigation, I have determined that flag colors applied in Apple's Mail program DO sync through your iCloud @me.com email address AND through a Google gmail account. However, flag colors DO NOT sync through Yahoo. Email highlight colors DO NOT appear to sync through iCloud, Gmail, or Yahoo. If anyone figures out a way to enable any of these features that at the moment do not sync (flag color in Yahoo, highlight color, mail rules), please respond!

  • How to sync the N900 calendars with the computer?

    Good evening everyone,
    I am a user of the N900 since February 2010 and it's my favorite phone of all the phones that i ever had. I really enjoy every second when i use it
    However, I have a "little" trouble now.
    The touchscreen doesn't respond normally anymore. When I touch it there's no reaction. The Calendar app or the Settings for example don't open. When I touch in the middle for example something completely different opens: desktop configuration. When I slide from one desktop to the other it stops in the middle and goes back to the previous one instead of moving to the next one. Or sometimes there's no response at all and I have to restart the phone, although it doesn't improve anything. I don't know how this happened because the other night I could normally use it, I set an alarm clock. And in the morning I couldn't turn this alarm off because the screen broke down during the night lol :/ what can be done to make the screen work again? Can I do something myself at home or do I have to take it for repair?
    So now I want to make on the laptop a backup of all the data I have on the phone. There was a moment when the screen worked normally again, so I took advantage of this situation to turn on the Bluetooth. I synced most of the data. It's a piece of cake for the pics, videos, contacts and messages. But I am unable to find a way of syncing the Calendar. Ovi Suite doesn't have this option so I tried with Nokia PC Suite. I managed to sync only a part of all the entries I have there :/ I realized that it syncs only the default one ("General" I think it's called in english?). I have 7 other calendars like "Work", "Fun" or "Events". How can I save those calendars on my laptop? Please
    Any advice/help is most welcome! Waiting

    Are you people serious? Sorry for being so direct, but this is supposed to be a help forum for Nokia users. NO ONE is able to give me even 1 solution??????? or at least hints??
    As always I can't count on others for help and have to do everything myself even though I'm not a smartphone geek. After a few days of search I managed to find a way to maybe sync the created calendars. But I have to create a profile in Outlook (what the hell?). Okay, I created a profile in Outlook according to the steps mentioned on a website and I still can't sync the calendars with Nokia Ovi Suite! WHY??? In addition, in the settings of the N900 in "Transfer & Sync" when I want to create a new data transfer profile I can't find my laptop as a device in the Bluetooth search list. I am UNABLE to sync/transfer data. I'll try now with the USB cable...
    PLEASE HELP OUT.

  • Using Mail with Exchange Servers

    My office, which is all PC except for my iMac, recently set up a Microsoft Exchange Server. I've set up my exchange account on Mail, however, when I log in using Outlook on a PC I can go into the advance settings and add additional shared mailboxes. Is this possible on Mail? If not, is it possible at all on the Mac?
    All suggestions welcome.
    Thanks,
    Adam

    Shootist007,
    I too loaded sparrow and it did seem to work fine with my (multiple) Gmail accounts and the folder/labels looked great (they do allow you to separate your inboxes/labels) with just a keystroke??---What I found was their HELP files were as MINIMAL as their program (fine for the more experienced I am sure) 
    I spent several hours!!! trying to figure out how to move the inbox messages to the (FOLDERS)??? I gave up!!
    IF ANYONE KNOWS THE STEPS FOR DOING THIS I may well try the program again as it did seem to behave with Gmail/multiple accounts/personal domain quite well!
    I will download thunderbird and give it a go in the morning
    Thanks for the quick response! 
    Chaplain T

  • How to sync the standby database with the primary?

    Hi..We have dataguard setup for our production databases(10.2.0.3).
    I need one clarification regarding the standby database sync with primary.We identified one of our databases is not in sync with the primary and for longtime the archives are not getting applied at the secondary.
    We decided to take the incremental (from SCN)backup from primary and use that at the standby to resolve the gap as described in the book "Oracle dataguard concepts and administration".
    But, before doing that,we observed couple of structural changes were not applied at the standby(ex:some tablespaces were not created in secondary where as they were there in primary).
    How to apply these changes at the secondary as the standby is in mount state.(Can I open this database and create those tablespaces ?? or do you suggest any other way.
    Thanks for your reply.

    This points to a setup problem. Something missing, a parameter set wrong etc.
    While your question is asking something different - How to correct, I would consider how to prevent. Unless you have a gap or logs not applied you have a deeper issue.
    If you have a gap or logs not applied then correct it and check to see if the missing object are present.
    The key parameters for Oracle 10 are :
    FAL_SERVER=STANDBY
    FAL_CLIENT=PRIMARY
    STANDBY_FILE_MANAGEMENT=AUTO
    DB_FILE_NAME_CONVERT='STANDBY','PRIMARY'
    LOG_FILE_NAME_CONVERT='STANDBY','PRIMARY'
    log_archive_dest_1='LOCATION=/u01/app/oracle/oradata/PRIMARY/archive VALID_FOR=(ALL_LOGFILES,ALL_ROLES) DB_UNIQUE_NAME=PRIMARY'
    log_archive_dest_2='SERVICE=STANDBY LGWR ASYNC VALID_FOR=(ONLINE_LOGFILES,PRIMARY_ROLE) DB_UNIQUE_NAME=STANDBY'
    LOG_ARCHIVE_DEST_STATE_1=ENABLE
    LOG_ARCHIVE_DEST_STATE_2=ENABLE
    LOG_ARCHIVE_MAX_PROCESSES=30
    Check them on both sides for issues.
    If your standby is really trashed consider using RMAN to duplicate it. You might end up saving time. I have Oracle 11 short notes on this but it will work on Oracle 10 too.
    http://www.visi.com/~mseberg/duprman.html
    Otherwise use statements like this to resolve you gap.
    ALTER DATABASE REGISTER LOGFILE '/u01/app/oracle/oradata/STANDBY/archive/PRIMARY_1_20_716110538.arc';
    ALTER DATABASE REGISTER LOGFILE '/u01/app/oracle/oradata/STANDBY/archive/PRIMARY_1_21_716110538.arc';See Section 5.8 Managing Archive Gaps of oracle document B14239-05
    Best Regards
    mseberg
    CKPT is correct, sorry I missed the Welcome to OTN!
    Edited by: mseberg on Jul 5, 2011 10:34 AM

  • How to sync up apple contact book and exchange contacts

    I have a bunch of contacts in my Apple Contact book but am using Outlook for Mac 2011 for email, contact management, and calendar.  I have read that you have to sync your Apple contact book to your exchange account rather than directly to the Outlook for Mac 2011 programs so you don't create duplicates (contacts coming from the Apple address book AND the Exchange server).  However, I can't find anything that tells me how to sync the Apple Contacts with my Exchange account.  I figure at that point once synced, my exchange account will push the new contacts from the Apple Contact book back into Outlook for Mac 2011 making everything whole. 
    Any help with this would be greatly appreciated.
    Thank you in advance.

    itsamacthing,
    Thanks for the quick response.  I do have the exchange service added and am only bringing the contacts down from the exchange side into the Contacts portion (not syncing mail, calendar, etc). It has seemed to create two different "sections' in the Apple Contacts Address book (Please see screenshot).  I was hoping to somehow merge/sync these two so I am always working out of one directory.  When I create a contact in my Outlook for Mac 2011 it dumps it in the "Exchange" section and up to my Exchange server.  However, when I create one on my iphone and sync the phone with this system via usb cable, it puts all new contacts created in the "On My Mac" section thus not moving it to my Exchange or Outlook for Mac 2011 causing new contacts to only sync with different sections based on where they were created.
    (As a side note, I have to sync via the firewire cable due to having over 10,000 contacts.  There was an issue with the previous release of IOS that caused massive problems with syncing over the air with that many contacts.  I've never fully recovered and have not had the hard to do over the air syncing again, hence the tethered sync).
    If there is anything I can do to get this rolled into one Address book that syncs from phone all the way through to Exchange server, I would appreciate any additional direction.  I've also included a second screen shot to show the difference between the Exchange contacts total (10,660) and the All on my Mac contacts total (10,774).  Ideally they would both say 10,774.
    Thank you again.

  • How to sync 2 apple ids

    how to sync one apple id with another apple id?

    Everywhere you look people appear to think SYNC means merge, it mean sync - i.e. keep everything up to date in one place across your life.
    I don't think I am alone with having a personal and business i.d. - sensible, so you can keep track of personal and business but I cannot sync my contacts from the 2 accounts so that I have the same information across my work devises and home (and some that do both!)
    It is the weakest of all the apple management software (love the new calendar, though).
    Sorry, it appears to be an oversite by Apple that we don't all live in their singualr apple world.

  • How do I reset apple mail to its factory settings?

    If anyone can tell me how to reset the apple mail app to its factory settings I would really appreciate it!

    The following thread could solve your question.
    RESET MAIL.APP

  • My mac version is OSX 10.9.4 and I just set up my Apple Mail with Yahoo! IMAP.  My question is how come when I open my mac contacts, The operation couldn't be completed. (CoreDAVErrorDomain error 3.) is shown?

    My mac version is OSX 10.9.4 and I just set up my Apple Mail with Yahoo! IMAP.  My question is how come when I open my mac contacts, The operation couldn’t be completed. (CoreDAVErrorDomain error 3.) is shown?

    http://www.microsoft.com/mac/support
    http://answers.microsoft.com/en-us/mac/forum/macword?auth=1
    http://answers.microsoft.com/en-us/mac/forum/macoffice2011-macword/microsoft-wor d-for-mac-2011-will-not-open-error/ecc42616-6f49-40bb-b8f5-e21c711ea359

  • How does the Apple Headphones with Remote Replacement Program non-return fee work?

    I have a pair of Apple In-Ear Headphones with Remote and Mic that I purchased a year ago. According to the "Apple Headphones with Remote Replacement Program", http://www.apple.com/support/headphones/replacementprogram/, these headphones are also covered in the program. Currently, there are some issues with my headphone's remote, as it is extremely unresponsive. I don't know how Apple determines the headphone's purchase date, but their online service request page accepts my iPhone's serial number. Is there any way that i could ensure that Apple's willing to replace the headphones for free (E.g. mailing my current ones in first) because the non-return fee is basically its retail price. I do not live in the US so I can't go and exchange at an Apple Retail Store. Thanks in advance.

    I would just bring them into your local Apple Store/Genius Bar and ask.
    B-rock

  • How to make friends Apple Mail.app vs MS Exchange:-)

    Hi,
    Help me please to resolve my problems with Mail.app via Exchange. I can sent mail no futher than the Exchange local adresses. But I can't receive any mail at all. No SLL, IMAP/SMTP by default, all settings are correct in all layers of my account. It's absolutely true. I have no more ideas how to sync Mail with Exchange. May be I need to configure the Exchange but how? Could you send me Exchange'screenshots to [email protected] with IMAP layer and others you decide they necessary? I will be appreciated for any support. Thanks in advance.

    Was an issue with Exchange public folders and IMAP clients (like MacMail)

  • Problems sending mail with Exchange SBS 2003 / apple mail

    Here is an odd one. I can easily sync up with the exchange server at my office using my mac. I can view new mail, view sent mail and drafts easily.
    When sending e-mail, it is a crap-shoot if it actually will send it or not. Sometimes it goes through, but the majority of the time it does not. I get delay messages from the server, and ultimately I get the "failed to send" message. But the mail is getting to the exchange server because I can see it in the queue.
    Through Parallels, I was able to successfully configure and run Outlook 2004. When testing the same e-mail addresses, the Outlook mail went through easily, but the apple mail stalled and eventually failed.
    On top of this, I can send e-mails to certain domains without ever getting an error through apple mail (i.e. a local company, hotmail.com, etc). Whereas others always or most of the time give me errors (cox.net, yahoo.com, another local company).
    I checked the message queue on the exchange server and sure enough they were stuck trying to resend every 5 minutes - with no luck. There has to be a security setting or something preventing me from being able to send mail through my apple mail app.

    This was an issue with my Exchange server.

  • Apple Mail with Office 365 Exchange server

    Is anyone here using Apple Mail with Office 365 Exchange server on Mountain Lion? I have just upgraded to Mt Lion and decided to switch from Outlook to Apple Mail.app. My account was added successfully. Even contacts, calendar, tasks and notes work very well. My problem with Mail.app is that it does not sync any emails in subfolders prior to the day I added the account to Mail. For any older emails I have to open Outlook for Mac and look it up there. Other than this issue Mail is working well for all new incoming and outgoing emails.
    Thanks

    I Found a workaround.  Please look at this other link:  https://discussions.apple.com/thread/6615135

  • How can I sync the ipod touch with windows 7 64 bit

    How can I sync the ipod touch with Outlook on windows 7 64 bit?

    I'm having the same problem with Windows 7, iTunes has been spotty about recognizing my iPod Touch. Now that I've updates Windows 7 with Service Pack 1 (June 2011), It won't complete a sync or a restore at all on either of my Windows 7 computers.
    I have gone through every troubleshooter action recommended by Apple Support, and have not been able to improve the situation at all.
    I took my Touch to the Genius Bar at my local Apple Store after trying and failing to complete a restore while troubleshooting, and it restored just fine from a Mac.  Unfortunately, it now gives me an error meesage (Incompatible device) half way through an attempted sync, or iTunes simply freezes.
    I even tried removing the Windows SP1, but that was a mess, as my display went all whacky and iTunes crashed immediately upon startup.
    The Windows 7 OS ***** in general, particularly with compatibility issues, and not just for Apple products.
    Does anyone know how to remedy this situation?
    I'm so frustrated and have wasted so much time on this issue that I'm going to throw it all out the window!
    HELP!!!!!!

  • How can i make apple mail dislay message body to the left not below the mes

    How can i make apple mail display message body to the left not below the messages
    headers pane ? something like outlook

    There is a plugin to do this in Leopard but currently its not compatible with SL however you might like to try the beta release which has preliminary support for 10.6:
    http://www.macupdate.com/info.php/id/21899

Maybe you are looking for

  • How to use a query in two different roles without copying it

    Hi, The report I try do should display only data that concerns only Controlling area (0co_area) of the user (there is need for two groups of users)). So far I created an authorization where I wrote down "0co_area = 1002" condition. then I created a r

  • How to use progress bar for Main and Subsequences in teststand

    HI, I have one main sequence in that I am calling different subsequences (Containing many steps and for loop). I am trying to use progress bar for this sequence, but my requirement is progressbar is able to show the progress of all the steps containi

  • How do I detect and remove a rootkit installed on my router (and/or computer)?

    Yesterday my wifi connection started acting wierd and then didn't work at all. I called my internet provider, they told me it was the router, so I called NetGear. Netgear took access of my computer, and an hour later told me that I have a rootkit pos

  • Sound does not work in Photoshop Album PDF

    I have a 5 yr old pdf made with Photoshop Album 2. The sound does not work and also an attached video does not play (only shows as a still image). This pdf used to work perfectly when I got it but since of course I have change computer, os and acroba

  • Mp3 to wav converter

    i am looking for mp3 to wav converter Api (in j2me) how it can be done help needed plz it 's urgent ! hoping for an early reply