How to sync video out of timeline?

I'm still learning and using FCP HD 4.5. The last time I used firewire to import a 2 minute video using capture now, it plays fine in the viewer, but after moving it to the timeline something goes wrong and it will not play back in the canvas in sync--the voice does not match the lip movement. Have I somehow messed up preferences or what? Thanks for any help.
Willus

Thanks for your suggestions. I do still have the material on tape--do you know how I can check to find out if the recorded audio was 32 khz/12? It seems I tried numerous times to try a new empty sequence to test, but will try again. The other possibility that occurred to me was that a few days before the problem, I did have the computer do quite a few updates that are sent automatically--but not for final cut pro.
I'll check the camera manual also to see if I can determine how to find the audio rate.
If you have any other thoughts or suggestions, I'd be most happy to try. I can also try another section of tape before this to see if it occurs then, too.
Again, thanks and let me know if there is someone I can call about this, too.
W.

Similar Messages

Help, HD Video Out From Timeline? How?

Hi
What is the Solution for play out footage from the timeline in Final Cut Pro HD-Video out to a HD LCD Monitor? Canopus has no solution, and I was looking at the Aja hardware also. I need HDMI out I think ? Your thoughts on what works? Thanks, Tim C.
What Card is reasonable? or What converter needed? Blackmagic Card possibly?

most of the cards are HD SDI out on BNC connectors. blackmagic makes a box called HD link that allows an HD SDI signal to be mapped 1:1 pixel wise to either DVI-D or HDMI. Your monitor will need to be 1920 x 1080+ for it to work. It Appears you will need both the card and the adapter. I'm using a Kona2 and the hdlink for the client monitor and it works fine. I use a real HD mon for critical evaluation. the info re this adapter and recommended monitors is here http://www.blackmagic-design.com/products/hdlink/
G5 dual2gig Mac OS X (10.4.4) xraid array,kona2, HD and SD decks
G5 dual2gig Mac OS X (10.4.4) xraid array,kona2, HD and SD decks

How To Sync Video To Audio

Hello all
I edit a wedding and notice that during the speeches the video and audio is out of sync the speaker is using a mike. Looking at the output on the TV everything is in sync but in the timeline it is totally of sync. Why is that? I look at the TV when recording so I didn't notice that after playing back the recorded DVD. I try to Mark in Sync in the Modify but it is not highlited I could be making the wrong move. If any one can make a suggestion I sure will appreciate it.
Thanks
Sabrina

You always have to monitor your audio through the same path as the video.
If it is in sync when you are sending your audio and video to the external monitor (through firewire) you are fine. If you CANVAS or VIEWER shows otherwise, you have audio and video going to different output devices.
In short, always monitor through firewire (if it's DV) and have audio set to AUDIO FOLLOWS VIDEO. That way, you will always know the truth (or at least FCP's version of it...)
cheers,
x

Itunes 8 how to get video out of there to Zen mozaics

I am totally?lost. Anyone have help to tell me step by step for itunes 8 how to get the kids video of Jonas bros to the creative Zen Mozaics. This is hard for me HELP . Thanks Stephanie a Mom in crisis LOL

Please first check the the format of the kid video that you would like to play on the Creative Zen, then follow the guide below, i'm sure you can make it easily.
How to convert video to Creative Zen compatible
You have a portable video/audio player, lets say a fancy Creative Zen, which you got as a gift from your friends or you bought for yourself, and would like to watch your favorite movies or just listen to the beautiful music using it's Sometimes you might encounter such an embarrassing situation as you are trying to playback a certain file format (video/audio) on it, but it just cant work out. Creative Zen video converter is just the program you need. It is a simple yet powerful Video to Creative Zen converter software that can convert almost all video/audio formats to Creative Zen compatible format and enables you to solve these problems quite easily with a few mouse clicks.
The Creative ZEN is a range of digital audio players (DAPs) and portable media players. All players are compatible with MP3 and WMA, while various models support WAV and Audible files. They are nati'vely compatible with Windows, while the current players exclusi'vely support Windows XP and Vista. They also support various other formats: Video: iMJPEG, WMV, and AVI (MPEG-4 SP, DivX, Xvid), while MPEG-, and MPEG-2 are supported, but must be transcoded with the included software (Video must not exceed the player's dimensions at 320240 pixels); Audio: MP3, AAC (unprotected ".m4a"), WMA (including protected), WAV, and Audible 2, 3, and 4 formats.
At the moment when you feel you got what you wanted of using Creative Zen video converter, there are reasons to save your project, in case if you want to change any adjustments and settings late, or a desire to get the resulting video as soon as possible. The both things will seem to be a trifle to do if to follow the steps below.
Tutorials
Step by Step on how to convert video to Creative Zen with Creative Zen video converter
Step Download and install Creative Zen video converter
Click here to download and install it by running Creative Zen video converter.exe
Step 2: Run Creative Zen video converter and select a video/audio file you want to convert.
Click the Add or File button to choose a file type that need to be converted, you can convert simply audio format or video format. while you can set an output path for the resulted video by hitting the Output drop-down list.
Step 3: click the Edit button to set detailed info for the desired video.
A. Click the Trim button to set the length/range of the video that need to be converted.
You can choose a small part of a movie or the whole one to convert to the selected format
B. Click the Effect button to tune the saturation, contrast, brightness values and make sure are the one you preferred, preview the change on the screen.
C. Click the Crop button to cut the unnecessary part or black part of the movie.
Step 4: Convert video
This step will take you a moment to carry out the conversion process, the time vary with different parameters you set.
Step 5: Upload resulting video to your portable
You need a USB cable to transfer the converted video to your Creative Zen.
please check the specific tool you would like to have to work with your Creative Zenothers: avi to Creative Zen MP4 to Creative Zen WMV to Creative Zen 3GP to Creative Zen MOV to Creative Zen flv to Creative Zen vob to Creative Zen rm to Creative Zen rmvb to Creative Zen mkv to Creative Zenasf to Creative Zen mpg to Creative Zen DVD to Creative Zen

Photo Stream-How to sync videos

If Photo Stream doesn't support syncing videos how do I transfer my home videos now? I'm on a Dell Laptop. I used to use Nikon Transfer before I signed up for iCloud and started using Photo Stream. But now my iphone doesn't show up as a device in Nikon Transfer.

That is a problem with the Nikon Transfer app.
http://support.apple.com/kb/HT4083

Is there a "how to operate" video out there for TD with the MBA?

I need to SEE how to operate this thing ... are there any opps videos out there to help me plz?

There's at least this one:
http://www.amazon.com/DisplayPort-Composite-Video-S-Video-Converter/dp/B004VV8R8 6
and the review says that it works with current Macs, but I can't verify.
Regards.

How to get video out to display menus and apps...

I have a 'myvu for iPod', which is a little video screen in your glasses, and it displays "Videos" and "YouTube" clips fine but I can't seem to get it to display videos played in other applications like the 'TED' app, photos, cover art during music playback or the menus for navigation. How can I configure the IPod to play everything on the audio/video out instead of just YouTube and Videos?

The ipod touch can only output youtube and movies at the moment on an external display.
It's been complained about for some time
Only thing that you can do for now is register your dissatisfaction at http://www.apple.com/feedback/
Regards
Paul

How to get video out on HP Touch Smart 600-1050

Hey i would like to see my computers screen on my hdtv but it doesnt seem that my computer has a vga out port. Is there any other way that i can get video out on this PC.

Hi,
Based on this, it does not have output port. On the left side it has HDMI & few others but it indicates does NOT for output.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

How to sync video precisely to bar on Logic Pro 9?

I would really appreciate if someone has a clue about syncing the video precisely to the bar and can post a reply to this thread. Here's what I have done so far...
Opened movie from File menu
Opened Global tracks > Video --Detect Cuts ( Created Scene Markers )
How do I align the scenes to the bar? My idea is to use the metronome for recording from the start of every individual scene with a different tempo for each.
How do u bridge the gap between the particular Scene Marker starting point to the closest whole bar?
I feel that there is some adjustment that needs to be done with Time signature before the particular scene marker so that the bar line sits aligned to the Scene marker...
I'll be glad to have this doubt cleared

Klunde, you are missing out the most vital parts in your post. A vocal chain for recording is:
You (your voice) - Microphone - Mic Pre - (perhaps hardware compressor, perhaps not) - (perhaps hardware eq, perhaps not) - then finally what you are recording into.
The source is the single biggest influence on what you need to do in the mix regardless of what you are recording into. In our case here, it happens to be Logic. My own vocal chain changes depending on what i am aiming to achieve and this carries through to the mix. On one song I may use a blue face 1176 plugin if required and on another a CL1B etc. Both sound great but both sound different and there are a myriad of ways to use each one. The same goes for EQ's and reverbs. But what you need for all of this is a great source. Get this right and your mixes and decisions will be a lot easier and your desired results faster to achieve.
So what is your source for your vocals?
After this it is all down to taste. For example, a compressor going into an eq sounds different from an eq going into a compressor. Neither one is right or wrong. Experience and experimentation will tell you which you want to use for a particular song. Top mixer Chris Lord-Alge uses lots of compression on everything. Top mixer Bruce Swedien is notorious for using virtually none. Both consistently mix great records and both have spent a life time honing their art and skill set. Experiment but get your recording chain right which means choosing the right kit for your vocal and gain staging everything properly.

How to sync video files from your Mac to iPhone/iTouch camera roll.

Everything's updated. Use new Macbook Pro & 4th gen iTouch
Problem: I do not know how to put a video from my computer to my iPod camera roll.
Here's what I DON'T want: I do not want to sync a video from my computer to the iOS "Videos" app.
Here's what I DO want : I want to sync a video from my computer to my iOS "Photos" app. aka camera roll.
It would be SOO amazing if someone knows how to do this. Thanks

If you want to transfer any size video to your iPod Touch, you can do this by dragging and dropping it into Pic Share It. The video will appear in your Camera Roll. It's a free program. Here's a video showing how it works.

How to sync video to iPhone

I have a video with extension .m4v which does not sync with my iphone. These are the properties of the video
MPEG-4 video file
128kbps
Low Complexity
Stereo
1572 kbps
480x360
H.264
I also have the same file in quicktime movie format. Even that file does not sync? I have specifically created this .m4v using itunes from a .mov file using "convert selection to apple tv". But, what ever I do, it does not sync with my iPhone. What am I doing wrong? Do I have to specifically export all my .mov files using "convert selection for ipod"?
I also tried the option "convert selection for ipod". This option does sync with my iPhone, but the video does not appear under Video. It does come under audio but not under video.
The first issue I need to resolve is how do I sync with iPhone.
The second issue I have is :
Is there a specific format that I can keep my movies, so that I can sync with both my apple tv, iphone and also play in itunes? I dont mind converting all my movies to one format, instead of retaining the movies in three different formats to play them on all three media.
-Nags

The data rate is too high -- 1500 is the max but 1000 is far safer (and most presets use under 1000).
Also, it sounds odd, but change the extension to MP4 when you convert it for iPod. Sometimes (maybe even a lot) the iPhone won't properly see an M4V extension as a movie. I know I have to convert all that I do with Handbrake to this extension.
I have both Apple TV and the iPhone and I use Handbrake for all my movie stuff. I convert using the iPhone preset but change the resolution to 640 (and turn autocrop on if I'm doing a widescreen movie). This plays perfectly on both the iPhone and Apple TV and, best of all, the quality is superb with small file sizes. I've run it on a 38inch TV and it looks to be as good or better than DVD in (it won't compare to HD but we're not talking HD here).
Even using the video cables (both composite and component) on the iPhone output the quality is terrific. I highly recommend this workflow.

How to sync Video folder

Hi All,
I'm wondering how I can sync a video folder between my computer and my Blackberry. "Media Sync" sounds like it should do that, right? But it seems I have to select specific videos, rather than a folder, which is not exactly synchronising -- more copying. I have a folder of podcasts that change every day. How can I get those automatically uploaded to the Blackberry when I charge it? I can't be the only person who wants to do this.
(I do not have a data plan, and even if I did one video would use up the monthly allowance.)
Thanks for any help!
- Elric

Can't do it yet, I'm afraid.

URGENT URGENT !!! Anyone know how to sync video to 3G iphone

video was imported via itune 7.7 . I can watch it in itune but cannot be sync. to 3G iphone. Pls advise how to do that urgently

With your phone synched to iTunes, click on your device, then click the Video tab. Select the file you want to sync, check it, then hit the Sync button at the lower right.

How to sync/pull out 'phymyadmin' data into power pivot?

Hi,
i work for a one of the leading e-commerce companies in India. ( Lenskart.com ). I have just installed powerpivot and looking forward to using my database /crm data into power pivot as the data is into millions.. i have login info of my server/db . rest
i do not knwo how to configure that to powerpivot so that i can pull out that data in powerpivot excel.. need hel to set it up..
thanks..

Hi Pranay,
This is the set-up I use also.
You need to make sure you first have the ODBC MySQL Connector installed on your machine (presuming you are Windows):
http://dev.mysql.com/downloads/connector/odbc/
WINDOWS
Then you need to go into "ODBC Data Sources". IF you are using Windows 8 or above simply type this into the start screen. Make sure you select the correct version i..e 64-bit if you are running a 64-bit system.
Click 'Add...'
Choose your driver, for me this is 'MySQL ODBC 5.3 Unicode Driver'.
Click "Finish".
You well then be prompted with a configuration screen, the only info I have needed is:
Data Source Name
TCP/IP Server
Port (usually 3306)
User
Password
Database
Click 'Test' to make sure the connection is working. In the past I have errors which were caused by my IP address not being added to the allow list on the server firewall, so be wary of this.
Click 'OK' and that is your connection done.
POWERPIVOT
In powerpivot open your data model and then select 'From Other Sources'
Choose 'Others (OLED/ODBC)'
Enter a name for the connection.
Click 'Build'
Click the 'Provider' tab
Click 'Microsoft OLD DB Provider for ODBC Drivers'
Click 'Next'
From the 'Use Data Source Name' select the data source you created above.
Click 'Test Connection'
Click 'OK'
Click 'Next'
You will then have the option to either write your own query to extract data or to select from a list of tables.
Hope that helps!

How to get video out of ipod touch?

How do I get video and audio ot of my i-touch with latest software? I am usin a 30 pin to av ot cable.

Try:
- Reset the iPod. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup
- Restore to factory settings/new iPod.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

How to sync video out of timeline?

Similar Messages

Maybe you are looking for