How to sync wifes new iphone4 to my iphone 3g with both on my apple id?

how to sync wifes new iphone4 to my iphone 3g with both on my apple id?

I think that might not work.  If you backup your wife's new phone and then try and restore the 3G from that backup I think that you will get an error message because the 3G needs to have the same iOS or higher than the 4 and the 3G can only have iOS 4.2.1  On another note it is not good to use the same ID for imessage on two phones ( if that uis what you plan on also doing) as you will get each others messages

Similar Messages

  • How does the wifi hotspot work on the iphone 5s with IOS 8 just installed?

    I donwloaded IOS 8 just a few minutes ago. I don't know how to enable the personal hotspot on my phone.

    Hey, I had this same issue (iPhone 5 tho). I used to have the enable hotspot on my main menu but Apple decided to turn it off and bury it before I could use it again.
    Settings > Cellular > Cellular Data Network
    Scroll down to the bottom. There should be a section that says "Personal Hotspot". Make sure that section has information in it (mine was blank). Copy and paste the APN from "Cellular Data" (the top section) into the "Personal Hotspot", then go back. See if that turns on an option that says "set up personal hotspot", then tap it to start customizing names and password settings.
    Hope this helps! What a frustrating thing...

  • How do I create new photo albums in iphone? why isn't it organized like in the iPad?

    How do I create new photo albums in iphone? why isn't it organized like in the iPad?

    You can't create new albums on the iPad either. The user interface looks different, but the functionality is essentially the same.
    The route is to create new albums on the desktop, and then sync via iTunes.

  • I have a new ipad and a iphone 5 which are under same Apple ID. I lso have a macbook that uses an older apple ID. How can I get the macbook to have same Apple ID as the other 2 devices

    I have a new ipad and a iphone 5 which are under same Apple ID. I lso have a macbook that uses an older apple ID. How can I get the macbook to have same Apple ID as the other 2 devices

    Have a read here...
    https://discussions.apple.com/message/18409815?ac_cid=ha
    And See Here...
    How to Use Multiple iDevices with One Computer

  • How to sync Safari bookmarks from iMac to iPhone?

    How to sync Safari bookmarks from iMac to iPhone?
    About my Safari bookmarks that are currently residing only on my iMac, I would like to see the same Safari bookmarks on my iPhone as well. Can I sync them from the iMac to the iPhone? Thanks.

    Yes, but you will need to use iCloud ...
    Apple - iCloud - Learn how to set up iCloud on all your devices.
    You get up to 5GB of storage for free.
    And not just bookmarks >  Apple - iCloud - Your info up to date on all your devices.

  • Hi how are you i want to replace my iphone 4 with a new one. But i am in Darwin,there is no any apple stores. So where can i send my phone for replacement and how much for that?

    Hi how are you i want to replace my iphone 4 with a new one. But i am in Darwin,there is no any apple stores. So where can i send my phone for replacement and how much for that?

    Warranty and Support are only valid in the country of origin.  You will need to take the device to whatever country it originally came from.
    Apple will not accept shipments from outside the country nor will they return it to an address outside the country.

  • How can I write new objects to the existing file with already written objec

    Hi,
    I've got a problem in my app.
    Namely, my app stores data as objects written to the files. Everything is OK, when I write some data (objects of a class defined by me) to the file (by using writeObject method from ObjectOutputStream) and then I'm reading it sequencially by the corresponding readObject method (from ObjectInputStream).
    Problems start when I add new objects to the already existing file (to the end of this file). Then, when I'm trying to read newly written data, I get an exception:
    java.io.StreamCorruptedException
    at java.io.ObjectInputStream.readObject0(Unknown Source)
    at java.io.ObjectInputStream.readObject(Unknown Source)
    Is there any method to avoid corrupting the stream? Maybe it is a silly problem, but I really can't cope with it! How can I write new objects to the existing file with already written objects?
    If anyone of you know something about this issue, please help!
    Jai

    Here is a piece of sample codes. You can save the bytes read from the object by invoking save(byte[] b), and load the last inserted object by invoking load.
    * Created on 2004-12-23
    package com.cpic.msgbus.monitor.util.cachequeue;
    import java.io.File;
    import java.io.FileInputStream;
    import java.io.FileOutputStream;
    import java.io.IOException;
    import java.io.RandomAccessFile;
    * @author elgs This is a very high performance implemention of Cache.
    public class StackCache implements Cache
        protected long             seed    = 0;
        protected RandomAccessFile raf;
        protected int              count;
        protected String           cacheDeviceName;
        protected Adapter          adapter;
        protected long             pointer = 0;
        protected File             f;
        public StackCache(String name) throws IOException
            cacheDeviceName = name;
            f = new File(Const.cacheHome + name);
            raf = new RandomAccessFile(f, "rw");
            if (raf.length() == 0)
                raf.writeLong(0L);
         * Whne the cache file is getting large in size and may there be fragments,
         * we should do a shrink.
        public synchronized void shrink() throws IOException
            int BUF = 8192;
            long pointer = getPointer();
            long size = pointer + 4;
            File temp = new File(Const.cacheHome + getCacheDeviceName() + ".shrink");
            FileInputStream in = new FileInputStream(f);
            FileOutputStream out = new FileOutputStream(temp);
            byte[] buf = new byte[BUF];
            long runs = size / BUF;
            int mode = (int) size % BUF;
            for (long l = 0; l < runs; ++l)
                in.read(buf);
                out.write(buf);
            in.read(buf, 0, mode);
            out.write(buf, 0, mode);
            out.flush();
            out.close();
            in.close();
            raf.close();
            f.delete();
            temp.renameTo(f);
            raf = new RandomAccessFile(f, "rw");
        private synchronized long getPointer() throws IOException
            long l = raf.getFilePointer();
            raf.seek(0);
            long pointer = raf.readLong();
            raf.seek(l);
            return pointer < 8 ? 4 : pointer;
         * (non-Javadoc)
         * @see com.cpic.msgbus.monitor.util.cachequeue.Cache#load()
        public synchronized byte[] load() throws IOException
            pointer = getPointer();
            if (pointer < 8)
                return null;
            raf.seek(pointer);
            int length = raf.readInt();
            pointer = pointer - length - 4;
            raf.seek(0);
            raf.writeLong(pointer);
            byte[] b = new byte[length];
            raf.seek(pointer + 4);
            raf.read(b);
            --count;
            return b;
         * (non-Javadoc)
         * @see com.cpic.msgbus.monitor.util.cachequeue.Cache#save(byte[])
        public synchronized void save(byte[] b) throws IOException
            pointer = getPointer();
            int length = b.length;
            pointer += 4;
            raf.seek(pointer);
            raf.write(b);
            raf.writeInt(length);
            pointer = raf.getFilePointer() - 4;
            raf.seek(0);
            raf.writeLong(pointer);
            ++count;
         * (non-Javadoc)
         * @see com.cpic.msgbus.monitor.util.cachequeue.Cache#getCachedObjectsCount()
        public synchronized int getCachedObjectsCount()
            return count;
         * (non-Javadoc)
         * @see com.cpic.msgbus.monitor.util.cachequeue.Cache#getCacheDeviceName()
        public String getCacheDeviceName()
            return cacheDeviceName;
    }

  • How can i install google maps on an iphone 3gs with latest os

    how can i install google maps on an iphone 3gs with latest os

    Actually Apple has developed its own maps and no more have it in sync with google as it did before so now apple has its own mapping software.
    http://www.nytimes.com/2012/09/20/technology/apple-ios-6-leaves-out-googles-maps .html?_r=0

  • How do i set up my pre owned iphone 4 with my giffgaff sim card that was used in my iphone 3gs

    how do i set up my pre owned iphone 4 with my giffgaff sim card that i have been using in my iphone 3gs
    My 3Gs is on its last legs.... I've just bought a second hand iphone 4 which is unlocked......I put my giffgaff sim card in the new phone and it says activation required ......then it asks me for a passcode???  PLEASE HELP!!!! I have no idea what to do xx

    You need to connect the phone to iTunes and then try activating it from there and restoring it as new.
    If you have further problems and especially as the iPhone you have bought is second hand, it could be that it is not unlocked.  Are you sure that it is?  If not, then you'll need to speak to the person that you purchased it from.

  • I put some programe in icloud but not my account how can i re enstole again in my iphone but in my account in apple plese help my

    I put some programe in icloud but not my account how can i re enstole again in my iphone but in my account in apple plese help my

    Please help me??????

  • How to I get itunes radio on my iphone four with ios 7

    How to I get itunes radio on my iphone four with ios 7

    So I was having the same issue and through guess and check I think I figured out the problem.
    Essentially iTunes Radio is only available in the US, hence your phone needs to know you're within the borders of the USA.
    I went into Settings > Privacy> Location Services > System Services (at bottom of the screen) and started playing around with some location systems I had turned off to preserve battery life. As soon as I turned on the "Setting time zone" function, iTunes Radio became available again.
    It looks like Apple uses that system service to determine location of the phone and thus the availability of iTunes Radio.
    You may have to close out the Radio app and restart (or even restart your phone) to make it work but so far so good for me.
    Good luck!

  • How do i trim an audio file on iphone 5 with 8.0.2

    how do i trim an audio file on iphone 5 with 8.0.2

    thanks for reply - it's a voice memo - i figured it out.  thanks again.

  • HT201493 How can I find my friends on my iPhone 4 with an apple i d already use

    How can I download find my friends on iPhone 4 with an Apple IDE used before

    You can access internet radio stations using an app such as TuneIn. There are many others as well.

  • How to change app store country location in iphone 4s with ios 7.0.3

    how to change app store country location in iphone 4s with ios 7.0.3

    Settings > iTunes & App Stores > Apple ID: > View Apple ID > Country/Region...change here.

  • How can I sync my new Mac to my iphone?

    I knew my old computer was giving up on me so I was trying to back up my iTunes on my old HP computer on an external drive...but I was too late! It crashed before I could back it up somewhere else.  The good thing is that I was able to sync my phone first and synce my whole iTunes library on to my phone..but now I can't figure out how to get my iTunes on my new Mac to sync to my phone vs. syncing my phone to iTunes?  I was able to of course download all the stuff I purchased on iTunes but can't seem to get all the other music I uploaded from CD's to my new iTunes on my new Mac.  I haven't been able to update my phone in sooooo long time because I'm afraid to "sync" my new iTunes and loose all the songs on my iPhone that weren't purchased through iTunes.  Does that make sense?  Someone please, please help!!

    Syncing to a new iTunes library or computer will erase your phone. Only if you back up manually before syncing, you can restore your device from that backup again. A manual backup does not include the sync process.
    Disable autosync in iTunes, connect your phone to your new computer and right click on it in the device list and choose backup. iTunes will backup your device without syncing.
    Transfer your purchases the same way, choosing "transfer purchases" this time.
    When you connect your phone for the first time, all media content will be erased. But you can restore your settings and app data from your manual backup afterwards.
    Don't forget to set up at least one contact and event on your new computer to be able to merge calendars and contacts when you sync the iPhone for the first time.
    Music is one way only, from the computer to your device, unless you bought the songs in itunes and transferred your purchases.
    For all other media you'll have to use 3rd party software, some mentioned in this thread:
    http://discussions.apple.com/thread.jspa?threadID=2013615&tstart=0
    About backups and what's saved:iTunes: About iOS backups
    How to back up and restore:http://support.apple.com/kb/HT1414
    How to download apps for free again:http://support.apple.com/kb/HT2519
    Saving other data is also described here. How to back up your data and set up as a new device

Maybe you are looking for

  • Where can I get a macbook pro repaired in Paris, France

    Macbook pro won't charge.  Seems like the connector on the laptop is not working.  Where can I have my daughter take the unit for repair in Paris, France?

  • Stock not showing properly in  for Batch determination

    Dear Gurus, While doing the following msg appearing since JAN 01, 2008, IN BATCH DETERMINATION THE SYSTEM NOT SHOWING EXACT QUANTITY AS IN ACTUAL STOCK Pls help for this issue, Regards, Atul

  • RFC to JDBC or PROXIES to JDBC ??

    Hello, I have a scenario where i need to send the data from SAP to two different Databases. In this what would be the best solution between RFC to JDBC and Proxies to JDBC. Which type can i prefer if I 1) Have the response from databases to SAP? 2) N

  • Curtain attachment

    Hello all, In P6 client there is an option to assign curtain dates which displays the date range in shade in the gantt chart. Does this dates get stored in the database? Is there an option to assign/populate these dates automatically based on Project

  • Video Editing changes to inpoint and outpoint not being saved when exporting.

    I'm editing .mov 1080p video clips from my DSLR in Lightroom 4.4.  I,m using the slider bar to set a new "inpoint" and "outpoint," shortening the video.  When I export, I am using the original format and new file name.  Lightroom tells me the video i