How to synch description, date and places for Facebook?

I was trying to upload some pictures from Aperture to Facebook, and wanted to have it input the description, date and place for the photos.
I typed in everything I want and uploaded the pictures but no information was showed on Facebook. And the description on Facebook remained the photo's file name...
Is there any way that Aperture does what I want?
THANKS

In my eyes the fault lies primarily with FB, as other services and apps recognize caption/Description pretty consistently.
If there is a fault in Aperture, it is that the sync with an Album on FB picks up the FB caption as a version name. It earlier tests, the filename of the original was not altered, but only the Version name.
I need to do some new testing about what can be transmitted from within the metadata to FB.
Ernie

Similar Messages

Urgent!! How to grab approval date and name for Internet Expenses

Hi,
I am doing reporting on Internet Expenses transaction however facing the below issue:
Not sure which table to grab the Internet Expenses
1) Approval date by manager
2) Approval name
Appreciate if anyone can advise on this.
Cheers,
SC

Gian,
You say you have a collection set with four series. Do you mean a collection set that contains four collections?
If not, you can arrange things that way. Create four collections (ordinary collections, not smart ones) and fill them with your four series. Then within each collection, in Grid View, drag the images into the order in which you want to display them. You need to drag by the image inside the thumbnail, not by the border. And you're done.
You can page through the images with the right arrow key.
Hal

Adjust Date and time for all Photos in an event?

Would some one tell me how to adjust the date and time for all photos in an event. For some reason when I change the date, it only changes the first photo in the event and I am left with a range of dates in the event, but I would rather they all have the same date in the event. Any thoughts or ideas?

How are you selecting the photos and changing them? How much of a change are you trying to make? A total change of date and time or just a delta change either plus or minus?
Using the Photos->Adjust Date and Time... menu option will apply the time/date difference to all of the photos in the Event if you click on the Event icon in the Photos mode or the Event mode.

How can I see date and time of a imovie event (new imovie 10.0.4). Thank you for your answer and greetings from switzerland.

How can I see Date and Time of an event in iMovie 10.0.4?
Thank you for your answer.
greetings from Switzerland

Managing Profiles
http://support.mozilla.com/en-US/kb/Managing-profiles

How To Find Opening Stock And Value For a Material

Hi Experts,
How To Find Opening Stock And Value For a Material in Given Dates
Moderator Message: Search.
Edited by: kishan P on Sep 15, 2010 4:05 PM

Thanks For Answering.....
But I Need Any Function Module To Get Opening Stock And Value For Given Material With in Dates.

How Production Order finish date and time is being comptued by SAP?

Hello Expert,
How Production Order finish date and time is being comptued by SAP? for example, we create a Production Order via CO01, the basic start date is 29.09.2008 and time is 04:00 it gives us basic finish date is 29.09.2008 and time is 13:28.
how does SAP compute the time 13:28 as it finished time
Please explain me briefly.
Thanks
Ryan

Hello Guys,
When we create Production Order in R/3 the time is calculated by routing but it is extended at SetUp machine time. It is not correct?. SetUp imachines time used only for first Production Order for the same product and it is plan manually, for others Production Order we need calculate time for production without SetUp machine time being pick up to compute finish time. how could we achieve this? only those Machine time will be check.
thanks

How to read the date and time information of a file by labview

how to read the date and time information of a file by labview? for example, created time and modified time.
Solved!
Go to Solution.

if you need to know the last modification date of file:-
"Functions->File I/O->Advanced File Functions->File/Directory Info.vi"
This vi returns the value of file's last modification date. This is returned as U32 number. To see it in MM/DD/YY format you must create the indicator, right-click on it and select "Format & Precision" item from drop-down menu. Then select "Time and Date" format there.
Thanks as kudos only

How to compare table data and table field

Hi buddy,
    I have some question about how to compare table data and table field.
   1. I know there is one method:   CL_ABAP_UNIT_ASSERT=>ASSERT_TABLE_CONTAINS , it use in unit test to compare the table data(A and B) , you can loop table A into structure A1, then use this mehtod it can compare whether table B contain structure A1. but when I try to use this in main program it will dump.
          CL_ABAP_UNIT_ASSERT=>ASSERT_TABLE_CONTAINS(
                                                                                                    LINE    = A1
                                                                                                    TABLE = B ).
       Is there any method or FM can be used to compare the table data ?
    2. I also want to compare two table field , try to find out the different. How to realize this.
Thank you for your sincerely answer.

Hi Zongjie,
What`s the difference, if you using loop A into wa_A, read table B into wa_B with all field, then compare with wa_A and wa_B.
The question 2, seems no standard FM available here.
Loop A into wa_A.
   Loop B into wa_B.
       if wa_A-field1 eq wa_B-field1.
       endif.
        if wa_A-field2 eq wa_B-field2.
       endif.
   endloop.
endloop.
regards,
Archer

How do i show date and time info of videos in Iphone as they appeare before import in iPhoto?

How do i show date and time info of videos in Iphone as they appeare before import in iPhoto? or even as they appear on the iPhone itself? The selection on tool bar for show info is greyed out.

Welcome T G Brown to the  iMovie boards..
the socalled timestamp is within the imports.. if you select a clip in iM and hit the key combo Apple-I, you can see recording time and date.
unfortunately, this info isn't delivered to any software. Bruce Gee (geethree.com, excellent plug-in maker) told us, there's no 'API' he could use for such a feature...
same on the pro side, read this discussion at the FinalCutExpress boards:
http://discussions.apple.com/message.jspa?messageID=7982935
Forum member Ian offers a solution with a 3rd party app ....
so: pen&pencil and typing timestamp manually into any 'Title' seems to be your only option...

Getting last login dates and times for graphical/xwindows logins?

Hi,
How do I get the last login date and times for users who just use the GUI (and don't launch terminals)?
So far such logins don't seem to show up when I do "last -f /var/adm/utmpx" or for wtmpx.
What should I be using on solaris to get the last login dates and times for all users, whether they log in on the text console, graphical console, or remotely via ssh etc?
Thanks,
Link.

Hi,
How do I get the last login date and times for users who just use the GUI (and don't launch terminals)?
So far such logins don't seem to show up when I do "last -f /var/adm/utmpx" or for wtmpx.
What should I be using on solaris to get the last login dates and times for all users, whether they log in on the text console, graphical console, or remotely via ssh etc?
Thanks,
Link.

How to load master data and hierarchies from R/3 systems

HI all,
how to load master data and hierarchies from R/3 systems.
Please explain the steps.
Thanks,
cheta.

HI,
Its normally done following: Transferring the master datasources in RSA5 to RSA6 and then replicating the DS into BW and assignment of DS to Infosource and cretaion of Infopackage and load it into the master tables.
Generally, the control parameters for data transfer from a source system are maintained in extractor
customizing. In extractor customizing, you can access the corresponding source system in the source
system tree of the SAP BW Administrator Workbench by using the context menu.
To display or change the settings for data transfer at source system level, choose Business
Information Warehouse → General Settings → Maintaining Control Parameters for Data Transfer.
Note: The values for the data transfer are not hard limitations. It depends on the DataSource if these
limits can be followed.
In the SAP BW Scheduler, you can determine the control parameters for data transfer for individual
DataSources. You can determine the size of the data packet, the number of parallel processes for
data transfer and the frequency with which the status IDocs are sent, for every possible update
method for a DataSource.
To do so, choose Scheduler → DataSource → Default Settings for Data transfer.
In this way you can, for example, update transaction data in larger data packets in the PSA. If you
want to update master data in dialog mode, smaller packets ensure faster processing.
Hope this info helps.
Thanks,Ramoji.

SCCM 2012 R2 changing date and time for patching software update groups

I recieve this error when changing date and time for software update group. worked fine yesterday before patches to the server were applied last night. we removed patches but still get error below. Any help would be great.
ConfigMgr Error Object:
instance of SMS_ExtendedStatus
Description = "Property array AssignedCIs exceeded the max allowed";
ErrorCode = 1078462259;
File = "e:\\nts_sccm_release\\sms\\siteserver\\sdk_provider\\smsprov\\sspupdatesassignment.cpp";
Line = 94;
Operation = "PutInstance";
ParameterInfo = "";
ProviderName = "ExtnProv";
StatusCode = 2147749889;
Microsoft.ConfigurationManagement.ManagementProvider.WqlQueryEngine.WqlQueryException
The SMS Provider reported an error.
Stack Trace:
at Microsoft.ConfigurationManagement.ManagementProvider.WqlQueryEngine.WqlResultObject.Put(ReportProgress progressReport)
at Microsoft.ConfigurationManagement.ManagementProvider.WqlQueryEngine.WqlResultObject.Put()
at Microsoft.ConfigurationManagement.AdminConsole.SmsDialogData.Put(IResultObject resultObject, List`1 resultObjectsPut, Boolean retainLock)
at Microsoft.ConfigurationManagement.AdminConsole.SmsDialogData.Put(Boolean retainLock)
at Microsoft.ConfigurationManagement.AdminConsole.DialogFramework.Forms.SmsPropertySheet.Put(ActionTrigger trigger)
System.Management.ManagementException
Generic failure
Stack Trace:
at Microsoft.ConfigurationManagement.ManagementProvider.WqlQueryEngine.WqlResultObject.Put(ReportProgress progressReport)
at Microsoft.ConfigurationManagement.ManagementProvider.WqlQueryEngine.WqlResultObject.Put()
at Microsoft.ConfigurationManagement.AdminConsole.SmsDialogData.Put(IResultObject resultObject, List`1 resultObjectsPut, Boolean retainLock)
at Microsoft.ConfigurationManagement.AdminConsole.SmsDialogData.Put(Boolean retainLock)
at Microsoft.ConfigurationManagement.AdminConsole.DialogFramework.Forms.SmsPropertySheet.Put(ActionTrigger trigger

no it is the final version... is working today after cleaning up database... is working now...thanks
Hello Robert,
would you please give some more informations, as I have the same issue and don't get what you mean bye "cleaning up databases".
Regards ooGDoo
ooGDoo

How to get system date and time?

Can someone show me a code on how to get system date and time.
Thanks!

there is one really easy way to get system time, the api gives a great example of code on this. use gregorian calendar, which you'll find in the api under GregorianCalendar. You only need to create one instance of GC, ie Calendar time = new GregorianCalendar();
you save seconds, minute and hours into int values, so you don't have to access the system time every second, you can create a thread which adds one to the int second value, if oyu see what i mean, for example, i have saved the hours, minutes and seconds as int values;
int hour, minute, second;
i can then create a thread (Thread thread = new Thread(this) and run it like:
Calendar time;
int hour, minute, second;
Thread thread = null;
public MyTime() {
hour= time.get(Calendar.HOUR_OF_DAY);
minute = time.get(Calendar.MINUTE);
second = time.get(Calendar.SECOND);
if(thread == null) {
thread = new Thread(this);
thread.start();
public void run() {
Thread t = Thread.currentThread();
while(thread == t) {
thread.sleep(1000);
second++;
if(second > 59)
minute++;
if(minute>59)
hour++;
formatTime();
public void formatTime() {
second = (second > 59? 0 : second);
minute = (minute > 59? 0 : minute);
hour = (hour > 23? 0 : hour);
System.out.println(hour+":"+minute+":"+second);
public static void main(String[] args) {
new MyTime();
I know this looks like gibberish but it should work. If not, try to fix the problem, i have written from memory really but i guarantee you, this gets the time then every second, simply adds one to the second and then formats time. You can also access the day, month and year then format them using the above code. I don't like giving code since you should really do these things yourself but it is 2:04am, i have nothing better to do and i am not tired so i did you a favour - i have become what i always did not want to, someone ho stays upall night writing code.

Unable to Determine the Change Date and Time for records in infotype 2011

Hi Everyone,
We need to know on when the clock-in and clock-out records were interfaced to SAP in infotype 2011.
The change date/time field in infotype 2011 is blank/not populated. Hence, we're unable to determine on when the clock-in records were updated in infotype 2011.
It is not possible to get the audit logs for infotype 2011 as it is switched off.
We found this table TEVEN and just the same thing, the field "change on" is blank.
Kindly help us on how we can determine the change date and time for records in infotype 2011.

Hi Prasad,
Here's the scenario.
On June 3, it was reported that staff's clock-in record on june 1, 7:00AM is missing in infotype 2011.
However, when I checked infotype 2011, the record is there.
So, they are now asking me on when this record was updated in infotype 2011 as they are thinking that there might be some delays in sending of the data to SAP.
The created on and created at in table TEVEN shows the same, june 1, 7:00AM which seems to be not true as on june 3, it was reported to be missing.
Can you help further on this?

PAPI-Add/Delete/Retrieve BPM Instance's data and attachment for an instance

Could you please me tell me how to Add/Delete/Retrieve BPM instance's data and attachment for a new as well as running instance using PAPI. Is it possible to have
a sample code.
Thanks,
Ben.

Hi Ben,
Start with this thread that shows you how to create a new work item instance in a process and pass in input argument variables to the new instance as it is created:
Creating a new work item instance in a process using PAPI
Here's a thread that shows how to retrieve variables from an instance:
Re: Instance info using PAPI in studio
Here's a thread that shows
1. how to run an activity in the process and pass in arguments using the "runActivity()" method,
2. How to run a Global activity and pass in arguments (runGlobal() and
3. How to send in a notificationto a notificationWait activity using the "sendNotificationInstance()" method:
Re: Acces Oracle BPM Process through Standalone Java Program
Finally, you can use the session.instanceAttach() method to attach a file to an instance.
Hope this helps,
Dan

How to synch description, date and places for Facebook?

Similar Messages

Maybe you are looking for