How to synchronise Mac and new Samsung i8510?

Hallo, I have a new Samsung i8510. When i try to synchronise it, iSync says "This device is not supported by iSync". What to do? Just waiting? Thank you.

It's a shame you didn't check for Mac compatibility before purchasing, as unfortunately, there's no sync support for this phone on the Mac.
It's highly unlikely that Apple will support this phone in a future iSync update. The unusual S60 over Symbian OS is not directly supported by iSync.
Your only hope is for either Samsung to release their own iSync Plugin (which they've done a few other models, although not ones running that OS combination) if it's possible, or for Mark/Space to add support for this phone in their recently released Missing Sync for Symbian, again if its possible.
http://www.markspace.com/products/symbian/ms-overview-mac.php

Similar Messages

How to provide space and new line to the text in AI Script

how to provide space and new line to the text in AI Script

?? can you explain better, can you at least add another sentence?
space
var mySpace = " ";
new line
var newLine = "\n";

T.code FF7A: how to see old and NEW open items?

Hi All,
I've filled the "Cash Managemeng Group" in the master data of a Customer.
The report Cash Manag.& Forecast doesn't update its old open line Items.
Only the documents successive to the insertion of the "Cash Managemeng Group" in the master data are updated in the report.
Could anyone tell how to obtain all the items (old and new) in the report?
Thanks
Gandalf

There are a couple options depending on the additional details of your situation....
Within t-code FDFD, there is a button labeled Data Setup. This button is intended for use when cash management (CM) is activated for an existing company code and CM needs to be updated with transactions created prior to the activation. It deletes all data in cash management for the Co.Cd. and then builds the CM data for all GL, customer and vendor accounts. There are also options to update CM for other areas (Sales, Procurement, Treasury, etc.)
Also within t-code FDFD, there is a button labeled Correct Data. This button can be used instead of the Data Setup button, if the CM data for a particular area needs to be corrected. This function has the following options: All GL accounts, All GL accounts with open items, All GL accounts w/o open items (non-open item managed accounts), All Customers/Vendors, All Customers, All Vendors.
It's best to run these functions when transactions are not being created on the system.
Regards,
Shannon

How to fetch old and new value from of a field(non-key) from LOGDATA

Hello SDNers,
i m fecthing LOgdata from dbtlog table[in our case the log is not getting Updated in CDHDR and CDPOS table]
i m using the same logic as it is used in RSVTPROT
but the problem is
" IT is fetching OLD and NEW VALUE after Update from same field LOGDATA of dbtlog table BUT when i used same logic it is FEtching only OLD VALUEs,
CAN U GUYS PLS TELL ME HOW TO FECTH OLD VALUE and NEW VALUE of a PArticular field(non-key field, fecthing key field is not an issue) From LOGDATA field of DBTLOG.
thx a lot in advance
Regards
Kuldeep

Hi,
May be this link is useful to you.
a®

How to Hide Catalog and New link fron BI

Hi,
I want to Hide Catalog Link and New Link Option form the navigation bar that appear in top right corner of BI. How would i achieve this
The purpose of doing this restrict users from creating new analysis and also not able to view folders inside shared folders

Check in Administration->Manage previleges->Home and Header
~ http://cool-bi,com

Difference between pocket mac and new desktop manager?

i use pocket mac and its fine for my bberry contacts, etc.should i change to the new software?

I agree with deepblade. I know a few people who downloaded the software without reading all the instuctions, or without doing a complete uninstall of pocketmac. Also some people didn't not check the proper sync services to make sure their device was being seen.
For me pocketmac never worked and completely screwed up my contacts.
Although DM is not perfect, IMHO, its 10 times better than pocket mac.
For those claiming they are going to run out an buy an iphone, get over yourselves. There is no perfect device or associated software that works 100% out the gate everytime for everyone.
I'm sure when DTM for the PC was introduced there were issues. RIM seems to have teh PC version under control and people seem happy. I'm new (6 weeks) to blackberry/RIM but I like my device and I would like to give them a chance and I hope they are reading this board and people are calling/email with issues so that they can be addressed/correct ASAP!

Server.app 3.2.1 how to rename Mac and iOS devices via MDM

Does anybody know how to rename Mac or iOS device in Profile Manager 3.2.1?
As I know we didn't have tools in Server.app before 3.2.1 but this functionality announced in 3.2.1 changelog.
I installed 10.9.5 and Server.app 3.2.1 in my lab and i can't find how to rename device.
I would be grateful if somebody help me with that question.

Thank you.
You are completely right and my test lab included only iOS 8 devices.
What I missed - the "rename" functionality presents only for supervised devices.
When my iPhone was supervised and enrolled to Profile Manager with Apple Configurator I found rename option under the gear/action menu.

HT1338 hello, I'm sure this is Mac OS X version 10.5.8 how to run icloud and new iPhone

hello, I'm sure this is a simple question answered before, but I'm really confused. I have a Mac OS X version 10.5.8 and cant run icloud or my new iPhone. I think that I need to pay to download new software, but what exactly do I need? I don't want to spend a fortune unecessarily and I don"t want to download anything that will screw up the laptop or not work....

Start by checking if you can run Snow Leopard:
Requirements for OS X 10.6 'Snow Leopard'
http://support.apple.com/kb/SP575
Whilst Apple have withdrawn Snow Leopard from their stores, you can still get it from Apple by calling 1-800-MY-APPLE (if you are in the USA) and they will supply the SL DVD for $20 for a single user, or $30 for a family pack that covers up to 5 Macs. You can also purchase the code to use to download Lion from the same number (Lion requires an Intel-based Mac with a Core 2 Duo, i3, i5, i7 or Xeon processor and 2GB of RAM, running the latest version of Snow Leopard), or you can purchase Mountain Lion from the App Store - if you can run that:
http://www.apple.com/osx/specs/
If you are outside the US call your national Apple Helpline:
http://support.apple.com/kb/HE57
If you're in the UK, use this number: 0871 508 4400
When you have installed it, run Software Update to download and install the latest updates for Snow Leopard.
To use iCloud you have to upgrade all the way to Mountain Lion:
http://support.apple.com/kb/HT4759

I need to turn off my pop-up blockers ASAP. I'm on a MAC and new to Firefox (comcast wiped out my Safari)

I'm on a testing site on my MAC OS 10, but new to Firefox (5.01). I need to disable my pop-up blockers for a specific site. How can I do this?
Thanks

Pop-up Blocker
* https://support.mozilla.com/en-US/kb/Pop-up%20blocker
Troubleshooting extensions and themes
* https://support.mozilla.com/en-US/kb/Troubleshooting%20extensions%20and%20themes
Check and tell if its working.

How do I create and new enterprise alias?

I am trying to create an enterprise alias as a proof of concept to address the issue we had about 8 months ago which I described in the following thread.
Terminated employee's personal reports are gone. Forever?
We are not won BI 4.1 SP01 Patch 6.
I create new users in our system by having them added to an active directory group and then I do an update of Windows AD in the Authentication section of the CMC.
Can someone explain this section to me?
I have read the admin guide corresponding to this, but I am still not sure what to do. I have 250 users that do not have enterprise aliases. So I would like to know how to create an enterprise alias for existing users. When I try to create a new alias I get this error message. I don't see a contradiction. This looks like a bug to me.
I would also like to know how to have them automatically created going forward for new users if possible.
Thanks,
Noel

Hello Noel ,
This may help
1804839 - How to add or remove an Enterprise alias through a script
in SAP BI 4.0
Cheers,
Fadoua

My DVD plays on my Mac and new BluRay player, but not on my TV

I burned a DVD with three mp4 movies. The movies play fine in QuickTime, and the DVD plays without a problem on my Mac. It also plays correctly on a newer BluRay player. However, when I try to play the DVD on an older DVD player (about 3 years old), I have problems. The DVD starts OK, and I can navigate the menu choices. However, I find that after about a minute, the player simply freezes, and I can't play or change anything. I tried burning a new DVD with a different format, but the same thing happened. I think the problem might just be that my DVD player is too old, but I wondered if there is a setting in iDVD to be compatible with older players. Any help would be appreciated!

I tried burning a new DVD with a different format
I'm not sure you mean because ALL video DVDs are in multiplexed MPG-2 format.
I suspect your set-top DVD player doesn't 'like' writable' media (it used to be fairly common). You might try using a DVD cleaning disc in case there is any dust over the player optical system.

How to check old and new value for a text item attached to a lov?

Hi,
I am new to Forms.
I need your help in following.
I have a form which has a text item which is attached to a LOV. I want to track what changes are being done using that form. So i want to know what was old value and what is new value.
I can get the new value as it is there in form field. how can i know what was the old value.
Thanks
Prashant Pathak

This is wrong:
name_in(':' ||l_audit_block.field_name)
this is right and will get you the current value of the the item:
name_in('l_audit_block.field_name');
Assuming the name of you block is "l_audit_block" and the name of your item is "field_name".
Please note name_in() returns your current value for an item. In your case this may or may not be the "old" value. I define "old" value as the value it was when it was queried. If that is what you are looking for you need to use the get_item_property() call that Steve described above.
--pat

Old MacMini 2006 and New Samsung LCD 2010 TV

I am NOT tech-savvy.
I want to purchase a new MacMini, but want to use my
old Mac Mini in some fashion.
What will this do for me if I somehow connect it to my
newer TV?

When you connect the MacBook using a Mini DisplayPort to HDMI adapter you will probably need to use external speakers or a 3.5mm stereo headphone jack to RCA sound plugs connected to a stereo sound system if your TV doesn't have separate RCA input plugs or a 3.5mm stereo input plug for audio with the HDMI plug. The Mini DisplayPort to HDMI doesn't carry audio unless you have the Mid 2010 model 7,1 and there're no audio plugs on most TVs to work with HDMI since it's expecting audio with the HDMI. But check your TV manual to see if it has audio plugs that work with one of the HDMI ports.
With the Late 2008 model 5,1 Aluminum Unibody there is an adapter that uses the Mini DisplayPort and a USB port to combine video and audio to HDMI. It's only 2 channel stereo not 5.1 Dolby Surround.
http://www.monoprice.com/products/product.asp?c_id=104&cp_id=10428&cs_id=1042802 &p_id=5969&seq=1&format=2

How to display values and new char line (blank line)

Hi,
In database, one field contains values followed by new character lines (blank lines) after blank lines there is no values. Finally, I would say the field contains values and blank lines. Every thing is fine in database.
In Crystal Reports the field is displaying only values. Need to display values and blank line.
User is asking after values new character lines (blank line) to be shown. They enter like that in an application. The user doubt is why report is not showing what they enter in the application.
In detail explanation, front end tool is ASP.NET and backend is SQL Server.
User enter some values in note field, after that they hit enter button in the same field, cursor will go next line...user may hit u2018enter buttonu2019 more than 5 times. So note field contain values and some blank lines which are created by after hitting enter button.
If user opens the application, they could see values plus blank lines in the note field.
They are fine with the application.
In Crystal Reports, the note field shows only values.
User is questioning that why we could not see in report we enter.
I checked in .Net application and SQL server database it is fine. It is displaying values and blank line.
Please help me out how to display values followed by blank lines in Crystal Reports - the way they enter in the application.
Thanks and Regards,
Manjunath N. Jogin

Hi,
Sharonmat,
I tried as you suggested. It is still displaying only values.
I would like to explain again.
it is not exactly null values.
In .Net application it is called 'new char line'.
it shows those many lines look like null.
it is working fine in database.
Why it is not working in Crystal Reports? I am wondering...
Thanks for your suggestion.
Debi,
User may enter any number of blank lines or they may not enter blank lines.
That is the reason I can not always give more height or blank text object.
Thanks for your suggestion.
Please suggest me some more suggestions,
Thanks and Regards,
Manjunath N. Jogin

Sudden banding issue with Mac and new Canon printer, already called tech

Good morning fellow Elementites.
I have been using Photoshop Elements 12 on my MacBook Pro 13 inch, running Maverick OS, printing to HP Photosmart Premium all-in one with no banding issues, ever.
I did want to upgrade my printer and monitor so I purchased the Canon Pixma Pro 100 and a new external LG IPS monitor to view the PSE program.
I also purchased ColorMunki Display to calibrate the monitor. Everything is operational with the recommended settings for color etc.
I printed a .tiff image and a .jpg through the PSE print function. The images that looked perfect on the new monitor and Macbook monitor printed with banding. I called Canon tech support. The man had me perform a few tasks to make sure the printer was operating correctly. We printed test sheets from the printer and they were all as they should be.
He the said he NEVER prints from PSE. He edits in PSE but prints using Canon's EZ share or print or whatever it's called, doesn't matter cause I do NOT LIKE IT AT ALL. Not to mention it is just another step in the work flow. Not to mention that I paid good money for a photo editing program of high quality and I want to use ALL the features.
He said the problem isn't the printer but the printing software instructions TO the printer via the Mac OS printer system, or something like this is what he said. He also had me download some other updates and driver files. He then had me remove the printer from my printer list and then add it back.
He then had me print the .jpg image, (it only prints .jpg which is annoying as heck,) and it came out SO BEAUTIFUL I ALMOST CRIED
I want to print this quality THROUGH PSE. Does anyone have a clue as to what to do to resolve the issue? None of the suggestions in other threads from the past seem appropriate enough.
Eager to hear,
Regards.

I have returned home and have copied down all the settings so that I may post them here before I do any more fiddling. Maybe something glaring will be spotted before I start changing things.
I opened an image in PSE 12.
I chose from the PSE menu at the top of the monitor, FILE >PRINT
A window appears with my photo and boxes and such: 1. Select Printer> CANON PRO 100-SERIES (The other printer isn't concern now).
Select Paper Size and Orientation, no problems with this or any of the other settings in this window.
I then select MORE OPTIONS button at bottom of window.
Another window opens.
There are 3 options listed on the left hand side PRINTING CHOICES which it is automatically on, CUSTOM PRINT SIZE which I haven't needed yet, and COLOR MANAGEMENT.
I select COLOR MANAGEMENT.
COLOR HANDLING is set to PRINTER MANAGES COLOR.
IMAGE SPACE is listed, not in any box, as sRGB IEC61966-2.1
PRINTER PROFILE is listed in a box that is grayed out and not selectable, as CANON IJ COLOR PRINTE...
RENDERING INTENT is set in a selectable box as RELATIVE COLORMETRIC.
(There is a little mssg below all this that reminds me to remember to enable color management in the printer preferences dialog. I was never able to find this action and after doing some research I read that this mssg is a boo boo as the function is automatic in MAC running Maverick, supposedly).
I then click OK and the box goes away.
I then click the PAGE SET UP button.
A window titled PRINT opens.
The Printer selection box says CANON PRO=100 series.
The next box always confuses me because nothing in the list appears to pertain to me when I want to print my photos. It is the Presets box.
I believe FAST PRINTING ON PLAIN PAPER is always showing when I open this window. But I don't want that so I always look to see if there is something I should choose that applies. I don't know what they mean by DEFAULT SETTINGS in this case. LAST USED SETTINGS would be ok if that was what I wanted each time I printed. FAST and FINE on Plain Paper? I have been assuming they mean plain copy paper so I don't choose that. SAVE CURRENT SETTINGS AS PRESET, I don't choose that because I haven't been sure of the settings. And the SHOW PRESETS does me no good becuase you can't change anything in there.
PAPER SIZE, not an issue at the moment.
LAYOUT button is my next stop, by now I am exhausted
I look at COLOR MATCHING which shows CANON COLOR MATCHING as the selected method. (The other choice is COLOR SYNC but I don't know anything about that one and haven't been told to change it.)
PAPER HANDLING & COVER PAGE, N/A at this time.
QUALITY & MEDIUM. I choose my paper type, paper source, print quality which for my photos I select HIGH. I don't touch COLOR OPTIONS because that is scary looking. And BORDER and MARGIN I have no issue with.
I then hit SAVE and the window closes.
Then I select PRINT in the lower right of the window that has my photo in it and from which I acessed all these other things.
Phew. So, can anyone tell me if they see anything wrong here, PLEASE.
Regards,
P.

How to synchronise Mac and new Samsung i8510?

Similar Messages

Maybe you are looking for