How to synchronize 2LIS_03_BX and 2LIS_03_BF

Dear Experts,
I have read how-to-guides which title: How ToHandle Inventory Management Scenarios in BW
Now on page 6, which has a red print out saying:
"restrictions for posting date or the material document number you only select those material documents that have created the opening stock (step 1)."
We have some constraints with R3 productions, they are:
1. R3 production is 24/7 so posting block is not allowed
2. MCNB to fill setup table for 2LIS_03_BX runs for 4 hours.
It has run from April, 16th 09:00 AM till April 16th lunch time (Approximately 13:00 PM).
Then I have to run OLI1BW which is to populate 2LIS_03_BF. Here lies the problem:
How can I know which posting date / material number documents are already contained in the current stock (Step 1) ?
Many Thanks and Points will be awarded !
BWAS

Hi,
Check in SDN..
Setting up material movement/inventory with limit locking time
Re: Business Content LO Data Source 2lis_03_bx not coming in LBWE transaction
Re: Help required for filling the Setup Table (2LIS_03_BX)
Thanks
Reddy

Similar Messages

Fill setup table 2LIS_03_BX and 2LIS_03_BF at same time

Hi Guys,
Can someone tell me whether I can run background Job to fill setup table of 2LIS_03_BX and 2LIS_03_BF at the same time?
By the way, whether I can run background job by different sever using different filters(site range A, B, C) to filling setup table of 2LIS_03_BX?
Thanks.
Regards,
Rojay

Hi Rajesh,
All three data source have setup table concept.
LO extraction means you should fill the setup tables.
2LIS_03_BX (Stock Initialization for Inventory Management)
2LIS_03_BF (Goods Movements from Inventory Management)
2LIS_03_UM (Revaluations) - captures revaluation data.
please refer the below document for your reference.
SAP BW - Inventory data loading step by step(0IC_C03)
Inventory Data Loading (MM) to BW PRD system
Thanks,
Phani.

Inventory DSO using 2LIS_03_BX and 2LIS_03_BF

Hi experts,
We are planning to have a DSO with cumulative key figures using the datasources 2LIS_03_BX and 2LIS_03_BF. DSO will have stock initialization data and material movements data. it should reflect current stock status(as of data load time) including material movements.
Any thought on this item is appreciated.
Thanks,
Varun.

Hi,
Please check this
ODS for 2lis_03_bf
/thread/253109 [original link is broken]
Hope this helps you.
-Mayuri

2LIS_03_BX and 2LIS_03_BF

Hi All,
Can i fill the setup tables for 2LIS_03_BX and 2LIS_03_BF Extractor at the same time.
Any issues on doing this parallel ?
Thanks,
Ram.

Hi,
Check in SDN..
Setting up material movement/inventory with limit locking time
Re: Business Content LO Data Source 2lis_03_bx not coming in LBWE transaction
Re: Help required for filling the Setup Table (2LIS_03_BX)
Thanks
Reddy

How to synchronize audio and video rtp-streams

Hi everyone!
I've tried to make one of the processors, processor1, control the other processor, processor2, with processor1.addController(processor2) but I get a
javax.media.IncompatibleTimeBaseException. I need to synchronize audio and video rtp-streams because they are sometimes completely out of sync.
In JMF API Guide I've read:
"2. Determine which Player object's time base is going to be used to drive
the other Player objects and set the time base for the synchronized
Player objects. Not all Player objects can assume a new time base.
For example, if one of the Player objects you want to synchronize has
a *push-data-source*, that Player object's time base must be used to
drive the other Player objects."
I'm using a custom AVReceive3 to receive rtp-streams and then I create processors for the incoming stream's datasource's, and they are ALL PushBufferDataSource's.
Does this mean I can't synchronize these. If so is there any way I can change them into Pull...DataSources ?
How are you supposed to sync audio and video if not with as above ?

camelstrike wrote:
Hi everyone!
I've tried to make one of the processors, processor1, control the other processor, processor2, with processor1.addController(processor2) but I get a
javax.media.IncompatibleTimeBaseException. I need to synchronize audio and video rtp-streams because they are sometimes completely out of sync.
In JMF API Guide I've read:
"2. Determine which Player object's time base is going to be used to drive
the other Player objects and set the time base for the synchronized
Player objects. Not all Player objects can assume a new time base.
For example, if one of the Player objects you want to synchronize has
a *push-data-source*, that Player object's time base must be used to
drive the other Player objects."
I'm using a custom AVReceive3 to receive rtp-streams and then I create processors for the incoming stream's datasource's, and they are ALL PushBufferDataSource's.
Does this mean I can't synchronize these. If so is there any way I can change them into Pull...DataSources ?The RTP packets are timestamped when they leave, and they are played in order. You can't change the timebase on an RTP stream because, for all intensive purposes, it's "live" data. It plays at the speed the transmitting RTP server wants it to play, and it never gets behind because it drops out of order and old data packets.
If your RTP streams aren't synced correctly on the receiving end, it means they aren't being synced on the transmitting end...so you should look into the other side of the equation.

How to synchronize audio and video

Hello,
I have an application that stream video images. Whats going on at the other end( the audio) I can also stream that.
Now i want to synchronize both audio and video for effective synchronized output.
Can i do that. I dont know the API that are available in Doja. Is Any timebase or timesynchronize APIs are available through which i can synchronize both.
Any Suggestions and ideas can be implemented.
Thanks

I know that In Midlet development using MMAPI there are APIs available to synronize the players like
p1.setTimaBase(p2.getTimeBase())
But I am not using Players. Through http connection I m getting the raw image data and displaying it through ImageItem i.e no players required.
Therefore If i stream the audio like this How to synchronize that.
I relly need ur Help
Thanks

How to fetch data from 2lis_03_bx and 2lis_03_bf

Hello Guys,
I have to create an inventory report for which i would have to use 2lis_03_bf and 2lis_03_bx for last consumption date and valuated stock value respectively. But when i am looking into rsa3 for these Datasource, i am finding nothing there.
Please suggest how would i get data from there.
Thanks & Regards,
Dolly

vishnu@sri wrote:
hi,
> Please follow these steps........
> Loading of 0IC_C03(Material Stocks/Movements)
>
> R/3 Side
> Step1:
> Tcode: SBIW
> Goto Settings for Application Specific Datasource
> Logistics
> Settings: Inventory Controlling
> Determine Industry Sector----Select Standard(CORE)
> Stock Initialization----Only Valued Stocks
> 2LIS_03_BX will be activated
>
> Step2:
> Tcode: MCNB
> Filling setup tables for 2LIS_03_BX
> Transfer Structure 2LIS_03_BX
> Only valuated stock(with posting block)
>
> BW Side
> First load 2LIS_03_BX
> Goto Infopackage---select Generate Initial Status in Update Tab
> Now Goto Infocube(0IC_C03)-Manage-Collapse Tab---Remove No Marker Update then click on Release
> Load BF & UM then Goto Collapse Tab & Select No Marker Update for Initial loads of both the datasources
> For Delta load Uncheck---No Marker Update
>
>
> Regards,
> Vishnu.
Thanks Vishnu.
I performed step 1 but by mistake i did it twice ..
so now double data records are visible in rsa3 .....
please suggest

Stock using AFS (2LIS_03_BX and 2LIS_03_BF)

Hi,
I have enhanced 2LIS_03_BF and 2LIS_03_UM extractors with AFS-specific fields, according to note 458676.
But the note do not enhance 2LIS_03_BX with AFS-specific fields.

Can I use 2LIS_03_BX to do opening stock balance to enhanced BF extractor?
(must I enhance BX? )
Taki

You must check if the new fields are required for the initial inventory....try toload and check....
In this PDF file you can find how to handle inventory management scenarios
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/f83be790-0201-0010-4fb0-98bd7c01e328
Regards
Message was edited by:
Oscar Díaz

Concept of Process 2LIS_03_BX and 2LIS_03_BF

Hi all,
I tried to load the data from R/3 for initialization and material movement with the following steps :
1. I run the infopackage to load the data for initialization stock from R/3. Let say I config the setup table on 24 Nov 2005. When I check to my PSA data, I saw the data on 24 Nov 2005.
2. Then I tried to load material movement data from R/3 and I saw the data with document date before 24 Nov 2005.
3. After that I can see the result in my infocube 0IC_C03.
My questions are :
1. What is initialization for ? because If I'm not wrong the one that impact to the infocube table is only the material movement.
let say if I have material A
 Firstly the stock is 15,
 a. Good receipt on 20 Nov 05 --> 10
 b. Good issued on 21 Nov 05 --> 12
 c. Good receipt on 26 Nov 05 --> 8
Previously, i thought I can have initialization on 24 Nov 05 --> 15 because this is starting balance of the material ....
but I was wrong, I will get the initialization on 24 Nov 05 --> 13 I just wondering why this is not impact to the infocube and what this is for ?
b. If I want to run my material movement on 26 nov to get good receipt (8), should I re-run the setup program to fill config table on R/3 ? so it means that i should delete the config table first right ?
c. does anyboy have the material document related to this question ?
Very appreciate of your help.
Thanks,
-Martin-

Hi,
Those 2 senteces are not contradictory.
Not compressing the requests for
the opening balance and for the historical movements leads to false results in
reporting.
It means
The data uploading from 2LIS_03_BX
The Initial uploading of 2LIS_03_BF
Compression is optional where no historical data has been
transferred into the BW, though it is recommended for performance reasons.
The data uploaded by delta uploading of 2LIS_03_BF
With rgds,
Anil Kumar Sharma .P

Reg Inventory DS - 2LIS_03_BX AND 2LIS_03_BF

Hi,
I have done all the necessary settings that are required for Inventory in BI as well as in R/3.
I am trying to load the data for the first time and when I load the data from 2LIS_03_BX I am getting both, added and transferred records, but when I try to load 2LIS_03_BF DS, the load is successful but I can only see the transferred records, the added records are 0.
Can anyone explain me about this...
Would defnitely assign points for the correct solution.
Thanks & Regards.

Please try checking the extractor checker in R/3 for 2LIS_03_BF.
As the load is not fetching any records to BW, it seems that the set up required for material movements might not have been run.
If RSA3 results in records then, obvisuoly even an info package from BW should do the same.
Naveen.A

How to synchronize audio and film

I have digitized several analoge films without any problem in I movie. Sudenly my audio is not running at the smane speed as the film. Audio is running faster.
How can i synchronize that??

Hi
Sudenly my audio is not running at the smane speed as the film.
Can it be so that material used is in one frame rate (fps = frames per second) and Your movie project in another ?
• NTSC = 29.97fps (standard in USA (and more) and on many Cameras)
• PAL = 25fps (standard in EU (and more))
Same goes for 50i and 50p and 60i and 60p.
iMovie doesn't handle 50p or 60p as standard (as far as I know) but material need to be converted to 50i or 60i first.
Then I use JES_Deinterlacer to convert from 25fps to 29.97fps - when I need to do a NTSC-project.
fps in Your project You see here (in Project window)
first ona at 24 bildrutor = 24fps (frames per second) (why it became this I wonder )
next 30fps (NTSC)
last 25fps (PAL)
Mixing material with different fps - can in MY CASES result in Audio (out of sync./drift)
Yours Bengt W

How to synchronize Nano and 30Gig on one computer

I have been using a new 30 Gig Ipod with no problems. My husband just got a 2 Gig Nano, and my iTunes software is not recognizing his Nano Ipod. If I install the software off the Nano cd, will it screw up my current software, music, etc.? Is the Itunes software different for each Ipod? How can I fix this - Please help!

You shouldn't need to use the CD, as the software that came with your iPod should include nano software -- altough you might want to download the newest version if yours isn't updated (06-28-06).
You might find this useful: How to use multiple iPods with one computer
Tom

Multiplayer game: how to synchronize client and server

Hi there, I'm wondering how to synchronzie client's and server's frame number?
I have a multiplayer spaceship(2D) game running at constant 30 FPS, since I use "frame number" to determine if a packet is too late or not, so I would like to have server and client both start frame 1 at the same time, but I have no idea how to do so, can anyone give me a hint?
well, if you want more details(may not be too much relevant to my problem, but any way, for anyone who interested):
I use UDP(my teammate implemented a TCP version, it's working but TCP is just way too stupid, lagging and some unknown problems produce very funny result). So far, on client side, input(key strokes) is sent via network immediately, but processed 2 frames later locally. So on lan, server will likely get the packet before it's time to process it, thus solve the packet delay problem a little bit).
Example: If user pressed fire button at frame 5, it's sent immediately to server, then at frame 7, client engine processes this "fire" event, and likely, server will get this packet at frame 6 or 7, then it can just processes it in time as well.
So there's a problem, server and client must both running the same frame number at the same time(maybe not exact, but gotta be very close).
By the way, I need some suggestions implementing the server, my brain hurts just thinking about it, I hope I will never have to code network stuff again: Server runs at 30FPS(but only broadcast game state at 6FPS), it just sit there between frame 1~4, get all packets and store them, then between frame 4~5, processes all the packets recieved, then broadcast the result(game state), client recieves it, will treat this game state as "correct game state for frame 5". I use this way because it solves packet delay and out of order packet to some extend.
However, say, if server broadcasts the game state for frame 5 at frame 5, then client is likely to recieve it at frame 7 or even later, how can client use it?
So, together, if you have suggestion or solution for my server and client implementation, please let me know, thanks heaps. I'm in quite a desperation at the moment.
P.S: I also posted this synchronizing problem at the socket programming forum, hope you guys (and girls) dont mind, since this is a place talking about game, that is a place talking about network, so I thought might be good to have suggestions from people in different programming area.

Why does the client need to have the same frame number as the server? I think a good way to do it would be as follows:
- Client sends all of the user's commands to the server (i.e. accellerate left, accellerate right, start firing, etc).
- Server processes these to update game state and every so often sends updates to the clients, saying something like "at frame 7, user X is at (10, 10) and user Y is at (20,20) and firing south".
- Clients process all updates from the server, as long as it hasn't seen any update from a later time yet. So if it recieves the update from time 10 before the update from time 9, it only does the one from time 10. It tries to move things smoothly, taking into average time between updates (if there are 100 ms between updates and on the next frame, user X should move 10 units, then move 1 unit every 10 ms).
By the way, it is possible to use TCP in games. Most MMORPG games use it. I don't know whether it's fast enough for a spaceship game, but it might be worth trying to fix the code you have. Try to keep packets small (use bytes for event type codes, player numbers, etc), group multiple events into one packet if they are all available at the same time, flush() the output stream as soon as you send one, and don't use a buffered stream or reader when reading them.

Stock using 2LIS_03_BX and 2LIS_03_BF

Hi all,
We have initilaised 2LIS_03_BX on 9th mar 2006. And then we have loaded historical stock data from 1st apr 2004 till 9th mar 2006 ie. around two years into stock cube. But the R/3 system has data since it is started i.e from 2000. I have doubt that would this affect the historical as on stock data for any historical date.
ie. for eg if I check as on stock in BW as on 31st jan 2006, isnt it that I should get exact data in report because I do have all historical stock movements data from 9th mar 2006 to 31 jan 2006 in my stock cube. Or since I have taken historical data in BW only from
1st apr 2004 though my R/3 system has it since 2000, I may get wrong stock data as on 31st jan 06?
Is that would get exact data from 9th mar onwards, but prior to 9th mar stock figures might not be correct?
Its very critical issue since I am facing problem in production system. Please help, I do have lots of hope from all the experts on SDN.
With Best Regards,
Wrushali

Hi Wrushali
In my opinion if the stock & material movement data in R/3 is present from 2000 then you should have loaded the opening balance as on 2000 instead of 2004. Since stock calculations are cumulative of material movements this might impact the stock values as on a particular date.
However can you please share issue in particular where you are getting wrong values in BW as compared to R/3.
Meanwhile have a look at following thread where init opening balance is discussed
Selection of new fields in lo extraction
Hope this helps
Regards
Pradip

How can synchronize video and audio?? (Help me!!)

I was writen a Client/Server program, but in Client's part Video and Audio doesn't not synchronize thought i was used method in 2.0 programer guide (use Player control Controller). Any one can help me??

http://java.sun.com/products/java-media/jmf/1.0/guide/JavaMediaFrame.fm7.html

How to synchronize 2LIS_03_BX and 2LIS_03_BF

Similar Messages

Maybe you are looking for