How to synchronize phone E63 and mac

i have isync..
but when i am looking for the phone - it says that it s not working..
i download the device but nothing happen..
what shall i do?
thx in advance

Hello Yingmai,
I am assuming that you are using DAQmx and also that you are just wanting to synchronize using the same board. Please correct me if I am wrong.
The NI-DAQmx Visual Basic 6.0 type library is based on the NI-DAQmx C API. Therefore, in addition to the installed Visual Basic 6.0 examples, you can also refer to the NI-DAQmx C API examples when creating a new NI-DAQmx application in Visual Basic 6.0.
Please see the following Knowledge base article for information on how to use the C examples for Visual Basic. There is a synchronization example for C, which you can use.
NI-DAQmx Examples for Visual Basic 6.0
Regards,
Raajit L
Application Engineer
National Instruments
Raajit L
National Instruments

Similar Messages

Phone contacts and Mac contacts

My husband needed Verizon so just recently got the iPhone although I've had mine from the beginning. The Verizon people transferred all his contacts that he manually entered to his old phone, to the iPhone. We also have a huge list of contacts that are synced to all our computers and MobileMe. I know many of his will be duplicates of our Mac contacts but that's okay if I can make his contacts a separate group which he'll select and I will de-select ... but will this be possible when we first sync?
Has anyone tried merging two sets of contacts and then separate them via groups? Is there another way?
Thanks!

Since you've been so helpful maybe you can steer me in the right direction for me to truly understand the difference (if any) between syncing (between mobile me, my phones, pads and macs) via iTunes settings & device settings and via the mobileme sync preferences & sync now. I've never understood it and I just want everything to have the same contacts and calendars on it but it seems the mobileme sync preferences thing always give me (more than 25%) error messages or tons of duplicates even after I reset sync data. Is there anywhere that explains it? I've been trying to understand it for years!!
MobileMe is a conglomerate of services, one of which is synchronizing between all your iOS devices (iPad, iPhone) and your Mac. It keeps your data "in the cloud" (a buzz term that has been thrown around lately that really means remotely on Apple's servers, not locally on your computer). MobileMe allows you to have all your data current by comparing it with it's master copy on their servers.
iTunes is used for synchronizing your iOS devices only. For those who do not have MobileMe, they can use iTunes to sync their contacts over the USB cable. All data is stored locally (not in the cloud) on that person's computer. If you are using MobileMe already and sync your iPhone in iTunes, it will not even look at your contacts or calendars as it knows you are using MobileMe for this. Think of iTunes and MobileMe as a one of the other thing - not both (in terms of data syncing).
When you "sync now" from the MobileMe preferences it is just referring to syncing your Mac, not your iOS devices. Syncing of MobileMe data on iOS is handled directly through the device itself. As for the 25% error message, that is a threshold that you have set up to alert you that it is about to change a significant portion of your data and a friendly warning asking if you're sure you want to proceed. Before I can suggest how to proceed, which has the most accurate, up to date data? Your Mac or Me.com?
-SM

I am purchasing a apple iphone 4 16 gb - model no. MC318LL, version 5.1.1 (9B206) CAN ANYBODY TELL THAT HOW OLD THE PHONE IS AND WHERE TO CHECK THAT IF I AM PURCHASING A RIGHT MODEL. SPECIFICATIONS CHECK ALSO REQUIRED

I am purchasing a apple iphone 4 16 gb from a local second hand seller - model no. MC318LL, version 5.1.1 (9B206) CAN ANYBODY TELL THAT HOW OLD THE PHONE IS AND WHERE TO CHECK THAT IF I AM PURCHASING A RIGHT MODEL. SPECIFICATIONS CHECK ALSO REQUIRED - its looks are like a new phone.

http://www.gazelle.com/how-to/iphone/model-identification
Turn off your Caps Lock - all caps is considered shouting and rude.
Many will not read your post if suject/body is in caps.

Unable to connect to iTunes/Apple Phone, iPad and Mac STATUS_CODE_ERROR

Unable to connect to iTunes/Apple Phone, iPad and Mac Apple Id Password
STATUS_CODE_ERROR

Based on the numerous posts regarding iTunes and the App Store, there appears to be an issue at Apple's end. Although Apple has not provided any indication on the cloud status page.
Do not change your settings.

How to set the IP and MAC address in C program?

My working environment is Sun250 Server, Solaris 7 operating system. I encountered a problem ---- How to set the IP and MAC address in C program to make the system change it IP & MAC at runtime?
Any idea is welcome! Thanks!

Hi
As a simplest possible solution, you can use the system command
to run ifconfig that can set both the mac address and the IP address of the system. You will have to use setuid though.
Or you can use the DLPI calls ( do a man DLPI or search for a
Sun documentation on the same at http://soldc.sun.com) to write
a pure C program.
HTH
Shridhar

HT1296 i am using i phone 5S and mac book air. i unable to syncing contacts.can you help me /

i am using i phone 5S and mac book air. i unable to syncing contacts.can you help me /

Since the release of Mavericks, syncing contacts with a Mac using iTunes is no longer supported. The currently supported method is to use iCloud. http://www.apple.com/icloud/setup/

I opened my account on the MacAir and have the new Mountain Lion showing i purchased. When I open my account on my other two machines it does not show. Any suggestions on why or how to fix? iMac and Mac Pro Thanks

I opened my account on the MacAir and have the new Mountain Lion showing i purchased. When I open my account on my other two machines it does not show. Any suggestions on why or how to fix?
iMac and Mac Pro
Thanks

SADLY not as i downloaded an upgrad to my original PAGES/
i have in the meantim had to open www.icloud. then from there import the file that i am working on and then check on ipad if it uploaded/ yes it did.
but what a waste of time as it doesn not save any changes done automatically back in the cloud....
i am now downloading the new LION and hope that it will fix the problem
i cant find any other way. I was lead to believe that you wrote, it saved automatically, on to the cloud, you then opened anohter device in anotother country even, and the new file was there, waiting, in its latest version.......
and the same magic was supposed to happen in reverse.
It doesn't/
if i have to open a browser, go to www.icloud....why on earth did they not just leave us an icon to drop it in in that case?
I hope the new lion will help resolve the isssue/
any other ideas> keep em coming...thank you so much.

I have been using iCloud since it came out to coordinate my schedules from my phone, ipad and Mac laptop. Last week they stopped synching...I can't upgrade b/c of memory. Could this cause the problem?

I have been using iCloud since it came out to coordinate my schedules from my phone, ipad and Mac laptop. Last week they stopped synching...I can't upgrade past OS 5.1.1. b/c of memory (1st generation iPad and iPhone 4s). Could this cause the problem after the release of the new OS?

Welcome to the Apple Community.
First check that all your settings are correct, that calendar syncing is checked on all devices (system preferences > iCloud on a mac and settings > iCloud on a iPhone, iPad or iPod).
Make sure the calendars you are using are in your 'iCloud' account and not an 'On My Mac', 'On My Phone' or other non iCloud account (you can do this by clicking/tapping the calendar button in the top left corner of the application ), non iCloud calendars will not sync.
If you are sure that everything is set up correctly and your calendars are in the iCloud account, you might try unchecking calendar syncing in the iCloud settings, restarting your device and then re-enabling calendar syncing settings.

How to synchronize NI-Scope and DAQ

I use a PXI-1042 System with a PXI-5124 Ni-Scope Card and a PXI-6120
with traditional DAQ controlled by a PC running WinXP and LabView 7.0
The intention of this setup is to make synchronized acquisition with
both cards with different sample rates. For the sake of an example let's
assume the NI-Scope runs at 100MS/s and the DAQ (6120) with 100kS/s. The Trigger is generated by
analog triggering of the 6120. I'm looking for a solution to garanty
that for a STOP trigger with post-trigger scans the last sample of the
6120 coincides in time with the last sample of the NI-Scope 5124 card.
Or to put it in more general terms a way to identify which of the 1000
Samples the 5124 Card takes in the sample interval of the 6120
coincides with the respective sample of the 6120 ? The point is to have
a time resolution (for phase difference measurements) better than that
given by the samplerate of the PXI-6120.

Here you can find an example that shows how to synchronize a DAQ-Device with a Scope-card:
http://sine.ni.com/apps/we/niepd_web_display.display_epd4?p_guid=B45EACE3E2C556A4E034080020E74861&p_node=175382&p_source=External
Hope this helps.

How to synchronize NI-Scope and traditional DAQ

I use a PXI-1042 System with a PXI-5124 Ni-Scope Card and a PXI-6120
with traditional DAQ controlled by a PC running WinXP and LabView 7.0
The intention of this setup is to make synchronized acquisition with
both cards with different sample rates. For the sake of an example let's
assume the NI-Scope runs at 100MS/s and the DAQ (6120) with 100kS/s. The Trigger is generated by
analog triggering of the 6120. I'm looking for a solution to garanty
that for a STOP trigger with post-trigger scans the last sample of the
6120 coincides in time with the last sample of the NI-Scope 5124 card.
Or to put it in more general terms a way to identify which of the 1000
Samples the 5124 Card takes in the sample interval of the 6120
coincides with the respective sample of the 6120 ? The point is to have
a time resolution (for phase difference measurements) better than that
given by the samplerate of the PXI-6120.

Here you can find an example that shows how to synchronize a DAQ-Device with a Scope-card:
http://sine.ni.com/apps/we/niepd_web_display.display_epd4?p_guid=B45EACE3E2C556A4E034080020E74861&p_node=175382&p_source=External
Hope this helps.

How to synchronize Address Books and Calendar Books in Mavericks 10.9.2, I am unable to synchronize my Address and Calendar Books informations with my iPhone 4 via iTunes

Since I updated my MacBook Pro's OS X version 10.6.8 to Mavericks 10.9.2, I am unable to synchronize my Address and Calendar Books informations with my iPhone 4 via iTunes. What do I need to do to update these data ?

I cannot synchronize the Address Book and Calendar data, even by means of iCloud or similar servers. It appears these data are not selected automatically during synchronization. How can one select Address Book and Calendar Book in Mavericks for synchronization ?

How to synchronize audio track and video when transmitting by RTP

since the audio stream and video stream are transmitted separately on the network even if in a merged data, how to synchronize the audio stream and video stream at the receiving end ?

camelstrike wrote:
Hi everyone!
I've tried to make one of the processors, processor1, control the other processor, processor2, with processor1.addController(processor2) but I get a
javax.media.IncompatibleTimeBaseException. I need to synchronize audio and video rtp-streams because they are sometimes completely out of sync.
In JMF API Guide I've read:
"2. Determine which Player object's time base is going to be used to drive
the other Player objects and set the time base for the synchronized
Player objects. Not all Player objects can assume a new time base.
For example, if one of the Player objects you want to synchronize has
a *push-data-source*, that Player object's time base must be used to
drive the other Player objects."
I'm using a custom AVReceive3 to receive rtp-streams and then I create processors for the incoming stream's datasource's, and they are ALL PushBufferDataSource's.
Does this mean I can't synchronize these. If so is there any way I can change them into Pull...DataSources ?The RTP packets are timestamped when they leave, and they are played in order. You can't change the timebase on an RTP stream because, for all intensive purposes, it's "live" data. It plays at the speed the transmitting RTP server wants it to play, and it never gets behind because it drops out of order and old data packets.
If your RTP streams aren't synced correctly on the receiving end, it means they aren't being synced on the transmitting end...so you should look into the other side of the equation.

How to synchronize iPhone video and microphone audio in iMovie?

1. I have video footage captured with an iPhone 5s (roughly 7 minutes of piano).
2. I have audio footage captured with a third-party microphone (same 7 minutes of piano playing).
3. I bring these two pieces of footage into iMovie and line them up at the beginning of the clips.
4. When I start playing the movie, the video and audio are in sync. Towards the end of the movie, the video and audio are out of sync by roughly 0.5 - 1 second.
My question is how do I synchronize the iPhone and microphone footage in iMovie?
Is this a problem with the video captured with the iPhone?
Or is this a problem with iMovie not able to synchronize video and audio from multiple clips?
Note: I cannot use beat markers to solve this, because the piano playing does not fall on equal durations ("beats").

I cannot synchronize the Address Book and Calendar data, even by means of iCloud or similar servers. It appears these data are not selected automatically during synchronization. How can one select Address Book and Calendar Book in Mavericks for synchronization ?

How to get imei number and mac address of mobile device on adf mobile

Hi experts,
I need to get imei number and mac address of device (supposed to be works on both android and iphone) on adf mobile
bgrds

Hi,
Adf mobile support phonegap api. Version must be 2.0(you can check it by below code snippet) You can just reach uuid from both platform via cordova. Espescially, IOS restriction limits you to get device infos that you mentioned, but you can get uuid.
   getCordovaVersion = function ()
        var cordovaVersion = device.cordova;
        return cordovaVersion;
    getDeviceUUID = function ()
        var uuid = device.uuid;
        return uuid;

How to synchronize analog input and output from two different USB daq boards

Hi all,
I have two very differnt USB boards the NI USB 6008, which I am using to acquire the data (Analog Input) and a NI USB 9263, it is an Analog Output only board that I am using to deliver a signal (in this case a square pulse). The reason why I am not using the 6008 Analog Ouputs is because I need to deliver negative voltages and need the full +/-10V range.
Looking at similar posts I am pretty sure that I can't use an external trigger or a shared clock, I also tried to use the synchronization of timed structures but no cigar.
I am including a quick vi that I whipped out showing how the signal jitters due to the lack of synchronization. The AO from the 9263 connects to the AI in the 6008 in this example.
Solved!
Go to Solution.
Attachments:
Test Pulse.vi ‏117 KB

I talked to a specialist in the phone and tols me that it is not possible.

How to synchronize phone E63 and mac

Similar Messages

Maybe you are looking for