How to synchronize source code using distributed NWDI Servers?

Hello,
I am facing a bit of a challenge trying to find documentation regarding the replication of source code using NWDI/DTR in a distributed environment. By distributed I mean independent instances in different geographical locations.
Scenario
Our customer product (DCs/SCs/etc) will be developed by two teams. These teams are far away from each other, and a local dedicated NWDI instance for each team is a must, due to the distance plus the big size of the product. It should be possible for the teams to work on a same Track. We use a NWDI 7.31 instance.
I have been looking into the documentation and so far I found no guide on how to keep both repository updated with each other changes.
The following links make notes of the scenario but are not addressing the solution properly.
Distributed Development
A synchronization of changes might have to be done between:
Workspaces present in the same repository.
Workspaces present in different repositories.
Developepment Infrastructure (DI) Architecture
Central source file management – in the Design Time Repository (DTR), a file storage in a database with export mechanisms that allow you to synchronize the instances of the DTR in a distributed development.
Solution?
Does NWDI offers any tool to solve this kind of requirement? Am I missing any documentation?
Or, NWDI doesn't have a solution for this kind of scenario?
And by the way, I would expect a "smooth" integration between the servers, like automatic asynchronous replication, with proper managment of conflicts and all the other delightful paradigms of source control.
Are we talking about exporting source code and importing it on the other side? Would this be the only alternative, and how is it done?
Thanks in advance.

A lot of obfuscators, rather than use one-letter method names, use keywords for names. This has the benefit of not decompiling to valid Java
Well, thats only true if you have a bug in your decompiler. My decompiler (jad) handles keywords by adding additional letters (underscores and stuff).
The problem is solved by an obfuscator. Compiled c++ code can be disassembled in the same way as obfuscated java byte code. So, if you were satisfied with the protection of your C++ code, then you should be just as satisfied with obfuscated java byte code.

Similar Messages

  • How to include source code in web dynpro java deployment

    Hi,
    We dont have NWDI.
    We are creating ear files out of web dynpro applications packaging them as sca files and deploying them in server.
    But the source  code is not included in ear.
    How to include source code with your ear/sca , so that when anyone downloads the sca file later, they are build the Project in the studio.
    How would they typically download? Do they require NWDI ,
    Right now we dont have NWDI in place, but we want to do is parcel the applications such that the source code should be available at a later time for download.
    This is possible with .par files , but what about web dynpro?
    Thanks,
    Deb

    If you are not using NWDI use the _comp file.

  • How to display source code of a webpage in Safari 7.0?

    Hello. I'm unable to find how we used to once enable developing tools in Safari Preferences or simply CMD + ALT + A to display the source code of a webpage. Now I've no clue how to display source code of a webpage in Safari 7.0 on Mac OS X Mavericks. Help.

    Hi gss2,
    Make sure you are not under the Apple icon but under Safari>Preferences>Advanced. All the way at the bottom check the box that says: "Show Develop menu in menu bar."
    Now go back to the page you want to get the source code for, right click on it and choose Inspect Element. Hope this helps.
    Cheers,
    LURDS LLC

  • Where is View Source? How can the source code of a website be viewed?

    Where is View Source? How can the source code of a website be viewed?
    View Source used to be accessed via a drop-down menu, but no longer. Why?
    I'm using Firefox 24.0.

    1.)Get into Firefox.
    2.)open any page that you want to see the source code.
    3.)After complete opening of the page do"right click"then you can see view page source,click it to see Source of the page.
    Thank you.

  • How to read source code in Safari?

    How do I read a web page source code using Safari?
    Thanks.

    Safari > Preferences > Advanced > Show Develop in menu bar
    then
    Develop > Show Page Source

  • Very Easy Question: How to view source code of JAR file

    Hi Experts,
    1) Can we can see the content of JAR file?
    2) How we can we see content of JAR file?
    3) I have with me JAR file. It is sap.compcui_gpoadp~ObjectAndDataProvider.JAR. I have to make some changes in the JAR file source code. How I can find the source code?
    I tried to see the source code using NWDS. However, I can not see the code.
    Regards,
    Gaurav

    >
    Gary wrote:
    > Can I make changes in the source code of JAR file? Can I make changes in the code?
    You cannot do this by simple repacking/rearchiving of JAR, because it contains special descriptor with fingerprint. In general, JAR is unmodifiable, however, you can create a new one with modified sources.
    You can try to import the JAR in some Java project in Eclipse, for example. Then make your changes and use the Eclipse's Export JAR wizard in order to repack the modified source Java files in a new JAR.
    >
    Gary wrote:
    > Can I rename the JAR file and still it will usable? Please confirm.
    I general, yes, the operation is allowed. However, you cannot do this with JAR deployed on some J2EE server or Portal, for example. Because there are references to it.
    >
    Gary wrote:
    > Please let me know if by any chance I can see the content of JAR file in NWDS.
    Yes, sure. Use Import from Archive wizard in Eclipse. Or add the JAR in the class path of some Java project and Eclipse will show you the content of it.
    BR, Sergei

  • How to migrate source code from TFS 2010 to a new TFS 2010

    Hi,
    Please help me, How to migrate source code from TFS 2010 to a new TFS 2010. we are using SQL 2008 R2 for DB storage and we have Backup of TFS DB. First TFS 2010 is live environment and second TFS 2010 is test environment both OS and SQL version is same. 

    Hi Pankaj0439,
    In general, to move TFS from a hardware to another, you can follow the steps as below:
    1. Check your permissions
    2. Back up databases and install software
    3. Restore TFS databases to the new hardware
    4. Update the configuration of the new application-tier server
    5. Verify permissions, notify users, and configure backups
    And you can also refer to this
    article in MSDN for more details.
    Best regards,
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • How to write source code in smart forms?

    hi friends,
    can anyone can help me in writing  sorcecode in smartforms r
    any materail link.
    if it is helpful points can b rewarded.Thanks in advance.

    Hi,
    Check this link for
    how to write source code in smart forms?
    http://****************/Tutorials/Smartforms/GettingStarted/SimpleText.htm
    You can write Source Code in smartforms By Choosing Program Lines.
    Check this link with Screen Shots
    http://****************/Tutorials/Smartforms/PO/page1.htm
    Reward All Helpfull Answers
    Regards
    Fareedas
    Edited by: Fareeda Tabassum S on May 21, 2008 3:09 PM

  • How to handle source code changes in apex

    hi all,
    can anybody help me plz...
    how to handle source code changes in apex.
    which development process is best suite for apex.
    Regards
    Alekh

    Thanks Andy, so as per the suggestion we have to handle the above snippet as individual if block statements as i had shown below.
    But in this case how we show the else part as NULL.
    correct me if my understanding is wrong.
    if  'Products' in (:P1_ENG_GRP1, :P1_ENG_GRP2, :P_ENG_GRP3) then
                    lv_to_email_id :='[email protected]';
    end if;
    if  'Materials' in (:P1_ENG_GRP1, :P1_ENG_GRP2, :P_ENG_GRP3) then
               lv_to_email_id :='[email protected]';
    end if;Thanks,
    Anoo..

  • How to obtain source code of weka and enable to modify it

    hello,
    how to obtain source code of weka and enable to modify it such i want to extract code of some process that I make

    Hi ENG,
    Since the issue regards to Weka. It is out of the support boundaries of our forum, I suggesT you post the question in the following forum:http://forums.pentaho.com/forumdisplay.php?81-Pentaho-Data-Mining-WEKA.
    It is appropriate and more experts will assist you.
    Regards,
    Katherine Xiong
    Katherine Xiong
    TechNet Community Support

  • How to find company code using sales doc. No

    Hi,
         I need to print company code, how to find company code using sales doc no. I don't find it VBAK.
    Cheers
    Senthil

    Dear Senthil
    You can find in table VBAK itself - Field BUKRS_VF
    thanks
    G. Lakshmipathi

  • How to read and then extract HTMl source code using java program?

    Hi,
    Could someone tell me how to read and then extract the content of certain tag from html source code. For example, given url http://.... , I would like to know what the <Title> content <Title> in that page is.
    Any help is greatly appreciate.

    Use a URLConnection to make the connection to the page at the needed URL. From the URLConnection, you can get an InputStream that is the stream of data from that page. Just search through the stream and find the <title> tags (don't forget to check for case sensitivity).

  • How to apply source code

    Does Contribute allow Admins to paste in (apply) source code
    to various Web pages? I've got a source code from Google Analytics
    I want to use for tracking and can't find how to apply it using
    Contribute.

    Use Insert--> HTML Snippet and insert the Google Analytics
    code at the end of the page. I tried in one of my site, it worked
    fine.
    When viewed the page source the GA code was insert here
    <GA code comes here>
    </p>
    <!-- #EndEditable --></td>
    </tr>
    </table>
    </td>
    </tr>
    </table>
    </td>
    </tr>
    </table>
    </body>
    <!-- InstanceEnd --></html>
    Thanks

  • How to Get Source Code of Standard ESS Component.

    Hi,
    I need to implement SAP Note 904107, in ESS ( Personal Info.) package.  However no tracks are maintained in NWDI for ESS.
    Please suggest me from where I can get Source Code for Standard SAP Web Dynpro component VcPerFamilyBEReview .
    I read in some blogs and its suggested to create Track in NWDI using ESS package which is deployed on server.  Please provide detail procedure, doc. and links for this.
    If any other approach is there to get sorce code please suggest.

    Hi,
    VcPerFamilyBEReview component is found in the DC sap.com/essbefam
    check these links to create track in NWDI
    [https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e0b2b146-5776-2910-4a8f-9b3190eab060]
    [https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/7014086d-3fd9-2910-80bd-be3417810c6f]
    [https://www.sdn.sap.com/irj/sdn/wiki?path=/display/java/netweaver%2bdevelopment%2binfrastructure%2b(NWDI)]
    Regards,
    vv

  • How to access source code for checked in .sca files in the dev environment

    Hello,
    I am trying to do some CRM E-commerce development. The basis personnel has checked in all the relevant SCA archives listed in the setup documentation.  He has since given me the Servername and port for accessing the NWDI that I can set in the Development Environment. I can log on to the system and see the repository browser with all the branches.
    For example:
       CustomerConfig -> CRMEXT -> sap.com_SAP-CRMWEB -> dev -> active
    CustomerConfig -> CRMEXT -> sap.com_SAP-CRMWEB -> dev -> inactive
    How ever there is no code there to sync. Is there something missing in our setup for the NWDI so I can sync the CRM E commerce projects to the local system and modify them.
    Is there anything we have to do either in NWDI or in the IDE to see the source code to extend it.
    Thank You for your help in this matter.
    Sumit.

    Hey Pascal, Thanks for the help. We did a batch check in and the code did not go through. After we tried the check-in in the non-batch  mode it worked.

Maybe you are looking for