How to synchronize the frame-rate on different devices?

Any solutions or hints are welcome. Thank you.

Don't cross-post:
http://forum.java.sun.com/thread.jsp?thread=506057&forum=33&message=2398355
http://forum.java.sun.com/thread.jsp?thread=506055&forum=406&message=2398352
http://forum.java.sun.com/thread.jsp?thread=506053&forum=28&message=2398347
http://forum.java.sun.com/thread.jsp?thread=506052&forum=57&message=2398345
http://forum.java.sun.com/thread.jsp?thread=506051&forum=45&message=2398342
MOD

Similar Messages

  • How to get the frame rate of my application

    Hi again...
    How can I get the frame rate of my application?
    I also want the frame rate value to be the title of the frame, updated every second. How do I do that?
    thanks in advance...

    To get the path where your application has been installed you have to do the following:
    have a class called "what_ever" in the folder.
    then you do a litte:
    String path=
    what_ever.class.getRessource("what_ever.class").toString()
    That get you a string like:
    file:/C:/Program Files/Cool_program/what_ever.class
    Then you process the result a little to remove anything you don't want:
    path=path.substring(path.indexOf('/')+1),path.lastIndexOf('/'))
    //Might be a little error here but you should find out //quickly if it's the case
    And here you go, you have a nice
    C:/Program Files/Cool_program
    which is the path to your application.
    Hooray

  • HT204370 How to  watch the movies also on different devices?

    I purchesed two movie on my Ipad and would like to watch in pc and on my iphone how to do that?

    Welcome to the Apple community.
    If you are in the US, you can re-download the movie on any of your devices from the purchased section in iTunes. If you do not want to do that or you are not in the US, you can connect your iPad to your computer and sync the movies to iTunes, which you can then sync to your iPhone in turn.

  • How can I change the frame rate of a project in imovie 10?

    My problem is: I made a gopro movie with a frame rate of 50 fps. I imported it to imovie. So far so good.
    Scrubbing over the clip i found one single frame which looked amazing. So I draged some seconds of that clip into the timeline (the project if you will).
    The goal was to make a freeze frame out of this "spezial" frame.
    Unfortunately I could not find this frame in the timeline any more - it's gone.
    I think imovie dropped half of the frames to fit the clip into the projekt, which I assume is using 24-25fps.
    The only solution I found is to decrease the speed of the clip to let's say 50%.
    But is there a better way?
    Can I change the frame rate of the projekt somehow? I think it was possible in imovie 11.
    many thanks
    Rainer
    (from austria)

    iMovie 10 won't share at 50 fps and so for 25 fps output probably drops every other frame.  This is different from Imovie 9 which could handle 50 fps.  However, if you do 50% speed it will use all the available frames so that is indeed the way to find the frame you want.  After you have made a freeze frame I think you can switch the clip back to normal speed.  I am not aware of a better way in iMovie 10  By the way there is also no facility to export a still of a frame in iMovie.
    As a GoPro user I think FCP 10.1 would be the best choice.
    Geoff.

  • How can I change the frame rate mode?

    Adobe Premiere Pro exports my videos with a variable frame rate. Because of this long videos are asynchronous. How can i change the frame rate mode? So Adobe Premie Pro exports my videos with a CONSTANT frame rate? The original video  has a constant frame rate...

    Sorry my mistakes. I am from Germany.. so...I mean with asynchronous that the video file and the sound file are displaced. In the beginning of the Video it's normal, but if the videos is very long it goes VERY "asynchronous"
    I analyzed the video with "mediainfo":
    General
    Format                                   : MPEG-4
    Format profile                           : Base Media / Version 2
    Codec ID                                 : mp42
    File size                                : 2.00 GiB
    Duration                                 : 20mn 13s
    Overall bit rate mode                    : Variable
    Overall bit rate                         : 14.2 Mbps
    Encoded date                             : UTC 2013-12-11 13:56:13
    Tagged date                              : UTC 2013-12-11 13:58:30
    ©TIM                                     : 00:00:00:00
    ©TSC                                     : 30
    ©TSZ                                     : 1
    Video
    ID                                       : 1
    Format                                   : AVC
    Format/Info                              : Advanced Video Codec
    Format profile                           : [email protected]
    Format settings, CABAC                   : Yes
    Format settings, ReFrames                : 3 frames
    Format settings, GOP                     : M=3, N=30
    Codec ID                                 : avc1
    Codec ID/Info                            : Advanced Video Coding
    Duration                                 : 20mn 13s
    Source duration                          : 20mn 13s
    Bit rate                                 : 14.0 Mbps
    Width                                    : 2 560 pixels
    Height                                   : 1 440 pixels
    Display aspect ratio                     : 16:9
    Frame rate mode                          : Variable
    Frame rate                               : 30.000 fps
    Minimum frame rate                       : 30.000 fps
    Maximum frame rate                       : 30.030 fps
    Standard                                 : PAL
    Color space                              : YUV
    Chroma subsampling                       : 4:2:0
    Bit depth                                : 8 bits
    Scan type                                : Progressive
    Bits/(Pixel*Frame)                       : 0.127
    Stream size                              : 1.98 GiB (99%)
    Source stream size                       : 1.98 GiB (99%)
    Language                                 : English
    Encoded date                             : UTC 2013-12-11 13:56:13
    Tagged date                              : UTC 2013-12-11 13:56:13
    Color primaries                          : BT.709
    Transfer characteristics                 : BT.709
    Matrix coefficients                      : BT.709
    mdhd_Duration                            : 1213733
    Audio
    ID                                       : 2
    Format                                   : AAC
    Format/Info                              : Advanced Audio Codec
    Format profile                           : LC
    Codec ID                                 : 40
    Duration                                 : 20mn 13s
    Source duration                          : 20mn 13s
    Bit rate mode                            : Variable
    Bit rate                                 : 158 Kbps
    Maximum bit rate                         : 254 Kbps
    Channel(s)                               : 2 channels
    Channel positions                        : Front: L R
    Sampling rate                            : 44.1 KHz
    Compression mode                         : Lossy
    Stream size                              : 22.8 MiB (1%)
    Source stream size                       : 22.8 MiB (1%)
    Language                                 : English
    Encoded date                             : UTC 2013-12-11 13:56:13
    Tagged date                              : UTC 2013-12-11 13:56:13
    mdhd_Duration                            : 1213777
    And there i can read that the "frame rate mode" is variable... and that's the bad thing... I want to change that point to a constant frame rate mode. I use the H.264 codec 

  • How to determine the accuracy of the frame rate using a Basler sca640-70gm?

    To whom it may concern
    I am guessing that the time between each frame varies from a nominal set frame rate.
    How do I set that nominal frame rate?
    How do I determine what the actual (frame by frame) frame rate or time between frames was in post pressing of the "video" image. 
    Thank you,
    Todd
    Solved!
    Go to Solution.

    It is almost impossible to measure the frame rate accurately by measuring the time between consecutive frames.  The latency of sending the images over the ethernet means they won't arrive at the computer with the same exact spacing they were taken at.  Also, measuring the length of one short interval in LabVIEW is also very difficult.  Windows latencies and other issues could make your measurement be off by quite a bit.
    The only way I can see to verify the frame rate is to use a digital input into a counter and wire the shutter signal directly from the camera into the digital input.  You could program the counter to measure between the rising edges of the shutter signal, and you would find out the frame rate is indeed very accurate and repeatable.
    The only other way I know to accurately measure the frame rate in LabVIEW is to measure the time over a large number of frames (thousands) and divide the number of frames by the total time.  Any minor errors in measuring the timing of a single frame go away with the large number of frames.
    Bruce
    Bruce Ammons
    Ammons Engineering

  • Hey. anyone knows how to synchronize the different sounds in a song the most easy way?

    hey. anyone knows how to synchronize the different sounds in a song the most easy way?

    Play better... just kidding.  Set an appropriate quantize value for all the regions in the inspector window. If you are doing live playing and need to synch to that it is MUCH more complicated. If you're new at this it might actually be easier to re-play it.

  • How do I set the frame rate to 12fps on my video, and it not change randomly?

    Hi, I imported a video layer from file then set the frame rate to 12fps, when I play the video it keeps changing the frame rate to random times. How do I keep it at 12fps

    Click the windows start button, then right click on computer, this will bring up a window that will tell you how much ram your system has.
    Also Start>Accessories>System Tools>System Information will give you all the details you need to know.
    As for Codec, That is an abreviation for code/decode it tells windows how to code when saving a video and how to decode when playing a video. Most formats are wrappers (avi, wmv, mov, rt) Each of these have a codec that you can choose from when saving a video, that codec then must be installed on the users computer to see that same video. Most formats come with a basic number of codecs and the creator of the video can purchase other codecs that provide better feature set.
    What the codec really does is takes the video and compresses it like a zip file then the user when playing require that codec to uncompress it.
    So each codec has its own strength and weaknesses. Some can compress more making a smaller file and perhaps inturn removes more data to get that compression and therefore has a poorer quailty video (just an example)
    I am sure you heard of a few codecs if you think about it. mpg, mp2, mp3, mp4, h.264 and so on. Mp3 is the only one I listed here that is for audio only. Yep thats right even audio uses codecs.

  • How do you change the frame rate (or fmp) of a project once you have already started?

    I have been working on a project for a long time now, and I just reliezed that the frame rate of the project was 25 where as all my clips were in 30. Is there any possible way for me to change the frame rate even though I've already started the project? or do I have to start again?
    thanks

    Hi,
    I've had a really good search through our documentation and website but there's no previous record of that error code. However, a quick google search turned up lots of things on MatLab user groups and the MathWorks forums.
    MatWork's official stance is that the PCI 7342 is not supported in MatLab. They have a list of supported hardware here:
    https://www.mathworks.co.uk/products/daq/supported/ni-daqmx.html#PCI

  • Would you like to change the frame rate of the project to 30 to match to m

    I just now moved some film clips from the Event Library to the Project Library and a white message window appeared saying: *MISMATCHED FRAME RATES. The frame rate of t his cli is 30 and the frame rate of the project is 25. Would you like to change the frame rate of the project to 30 to match the clip? And two radio buttons: Don't Change and Change.
    First of all, the other day I set my Sanyo VPC-HD2000A to shoot film at 1280 x 72 at 30 fps SHQ. Now I just checked and it is set at the topmost red zone960 x 540 at 30fps. The only thing I can think of to explain this is that I selected it but did not "set" it.
    Thus now I have a message asking what I noted above. Should I click CHANGE?
    WHY IS THE FRAME RATE OF THE PROJECT SET AT 25? How did I do that? What did I do that caused me to have a project that is set at 25 fps?????
    Time for another snack. 8-(
    -L
    A side issue is to find out why I set my Sanyo VPC-HD2000A at one rate (above) but now see that all the footage was shot at a different rate. Very very frustrating.

    AppleMan,
    It all began inside the settings of my Sanyo VPC-HD2000A when somehow the selection got switched from 1280 x 720 to that other setting with so-called 25fps. Also, I don't know whether the mishap occurred before or after I took my new footage.
    I edited the clips last night and now they are on my blog and channel and they seem ok but slightly fuzzy.
    I used a Sanyo VPC-HD2000A .7x wide angle lens with macro and I notice that when I zoomed in to the little sun conure, the picture blurred. I think that might be something that happens when one zooms the focus.
    Also, I was born and raised to a teenager in Hawaii, but now Southern California has me in its grip.
    -L

  • Where is the frame rate setting control when making a slide show?

    I am trying to make a slide show using QuickTime Pro and cannot find the frame rate control.I put all my consectively-numbered jpegs in one folder. I then clicked on "File," the "Open Image Sequence," then a window opened up and I click on the first jpeg in the series of photos I want in my slide show. Then the first image appears in the QT Window. The instructions next say that I should be able to change the rate at which each slide/jpeg appears, but it doesn't tell you where to find the "frame rate" so I can change it. It doesn't appear at all on its own, so where is it? Anything else I'm missing? Thank you.

    barbaric135
    What version of Photoshop Elements and or Premiere Elements are you using and on what computer operating system?
    In addition, could you please clarify?
    It sounds like you are creating your slideshow in the Elements Organizer. Where are you seeing these distortions and blurs, in the Elements Organizer Slideshow Editor Filmstrip or in the Premiere Elements workspace after you have transferred the slideshow from the Elements Organizer 9 Slideshow Editor to Premiere Elements workspace?
    What are the pixel dimensions of the photos in this slideshow and how many of these photos are in the slideshow? What format are they in..jpg, psd, other?
    With regard to what you wrote:
    Also how do I transport them from Elements to Premier, it has a tab to do that but when I get to the elements file I don't know where to drag and drop into.
    If you are in the Elements Organizer Slideshow Editor and use the Output option Edit with Premiere Elements, then you would expect the automatic transfer of the slideshow to Premiere Elements, with a copy in video format (.psess) in the project media as well as on the Timeline. Nothing for you to drag and drop.
    For all those reasons, I am asking for clarification.
    Thanks.
    ATR

  • Is it possible to viw the frame rate (fps) on the finder?

    I have always been interested to see what the frame rate of my iMac is, but I can't work out how. I've searched the built in help, I have tried to search through the previous discussions on the topic but all with very limited success. There has to be someone who knows out. I've seen it done on Windows but have no idea on OS X. Also if I am playing a game I want to be able to see the frame rate "over" the game (if you know what I mean). Thanks in advance.

    The operating system really doesn't have a measureable frame rate other than the refresh of the monitor.
    Displaying the framerate in games is determined by the game settings.

  • Is it possible to change the frame rate of a motion template?

    Motion has some very useful templates, but the majority are only offered in NTSC, not PAL. (including all in 3D TEXT PROJECTS).
    Is it possible to change the frame rate to 25fps before I start adding my own stuff, so that I can easily get the timing right for a PAL sequence in FCP.
    If not in Motion, how else could this been changed?

    Try dragging all the groups from one project into another instead - you'll need to open both project and rearrange the windows so you can see the layers tab for both of them.

  • How to restrict the quantity & rate of MIRO with MIGO and PO

    Hi friends,
    Can any body tell me how to restrict the quantity & rate of MIRO with MIGO and PO.
    e.g. if we have done MIGO for quantity 10 and the rate maintained in the PO is Rs.100.Then at the time of MIRO system should not allow to change the quantity and rate.
    How we can do this?
    Regards  
    Purnesh Sharma

    Hi,
    You are misunderstanding the use of MIRO.
    If you change the details in MIRO you are NOT changing anything. You are just entering the price and quantity from the Invoice.
    If this price and or qty is different from the GR aqty and PO price then the system will block the invoice for payment (and it can issue messages toinform the buyer if configured correctly).
    The whole design of MIRO is based on the principle that you enter EXACTLY what the vendor has put on the invoice. By preventing the users from changing anything you will get NO mismatched invoices, but you will not be paying the vendor the amount specified on their invoice. This will surely cause problems.
    If you do want to ensure that ONLY the GR qty and the PO price are used and cannot be changed then why not consider using ERS (Eveluated Receipt Settlement. this is basically self billing.
    Effectively you will be paying the vendor based on what you have received in MIGO multiplied by the price from the PO. (which is what you would be doing if you stop any changes in MIRO)
    Steve B

  • How to maintain the exchange rate of second currency in MIRO ?

    hi,
    User want that the exchange rate of second currency in IR is same as the exchange rate of second currceny in GR, and don't  occur any exchange variance in IR. how to do ?
    BestRegards,
    Beck.shi

    Thanks for your reply.
    GR and IR post date are different，also the exchange rate are different. user  modify the exchange rate of local currency in IR(in MIRO's Screen) to the same as the exchange rate in GR, so there are no the exchange veriance in the local currency's ledger. if needn't the exchange variance in the second currency's ledger,how to do?
    Bestregards,
    beck.shi

Maybe you are looking for