How to synchronize the time in NI 1776 smart camera

Hi,
i'm using 2 NI 1776 Smart camera together, how can i synchronize the time with host pc?
i had follow this thread to setup the NTP at host PC
http://digital.ni.com/public.nsf/allkb/FFC39254D02C652A86257A620074FB49
and then follow another thread to setup the NI-TimeSync 1.2
http://digital.ni.com/public.nsf/allkb/402F0F07F851768486257A1B0063EE88
but i encouter some error when installing NI-TimeSync at Smart Camera (refer to s3.png)
i'm using window 7 with LabView 2011 SP1 and VBAI 2011 SP1
anyone know how to solve this problem?
Attachments:
s1.png ‏122 KB
s2.png ‏107 KB
s3.png ‏25 KB

VBAI 2011 is based on LabVIEW 2010.
So you will either have to use LabVIEW 2010 + LabVIEW Realtime 2010 in combination with VBAI 2011 SP1,
or you use LabVIEW 2011 + LabVIEW Realtime 2011 in combination with VBAI 2012.
And here is a KB which explains how to synchronize 177x SmartCams to a timeserver.
Christian

Similar Messages

How to synchronize the time from an internal ip adress (MS ISA Server)

How I can synchronize the time of eMac client from an internal Time Server (Microsoft ISA Server).
I have setting the DHCP time parameter but it does not work in the e Mac but only in Windows clients (2000 and XP).
My Firewall does not allow the eMac client to synchronize from the external time server.
Sorry for my english.
Best regards,
Stefano

Yes but selection allow to select only Apple Time Server: in my case Apple Europe (time.euro.apple.com).
The possibility does't exist to set up an other server outside of those proposals.
If you know like modifying the values proposals and adding a fixed IP for example, it makes to know me.
Sorry for my english and Thank you for your post
Stefano

How to synchronize the FieldPoint time with my computer time?

When I using MAX to read the values from my FieldPoint cFP-1804 module, there is and timestamp generated for every measurement, but it does not match my PC's system time. How to synchronize the FieldPoint time with my windows PC?
I found a thread on the forum regarding this problem (http://digital.ni.com/public.nsf/allkb/C4E56AD6450FC5FD86256DFF0007FF01), it ask me to select the Time Zone on the System Setting tab, but I didn't find any System Setting tab and Time Zone setting in my MAX screen. (MAX version4.4)
I'm using the cFP-1804 without embedded CPU module, I'm using asp.net, measurement studio to link with the cFP-1804, not by using Labview. Does cFP-1804 have a Time Server function? Please tell me how to match the FieldPoint time with my PC.
Thanks

Hi Presario2100,
In order to obtain an updated timestamp with each FieldPoint Read, you should
use a Flat Sequence structure. In the same frame as the
FieldPoint Read, use a Get Date/Time In
Seconds node.
The program obtains a fresh Timestamp each time the FieldPoint Read VI is
called.
I hope this helps.
Message Edited by Pie56694 on 08-15-2008 05:58 PM
Attachments:
TSUpdates.jpg ‏38 KB
FlatSequence.jpg ‏54 KB

How to make the times of all nodes similar

Hi,
i have a 3 node 10.2.0.4 64Bit Cluster database on
HP Itanium with OS RHEL-4.6.
we donot have any NTP Server integrated with these.
Three nodes are running with three different Time with significant differences.
More over 2 of the Nodes run well ahead of real Actual time and One run behind actual time.
For Example at 11:34 AM the nodes return their times as follows::
HOST_NAME DATETIME
Node-1 11-JUL-2012 11:56:38
HOST_NAME DATETIME
Node-1 11-JUL-2012 11:18:12
HOST_NAME DATETIME
Node-3 11-JUL-2012 11:44:26
the real time difference is 16 Min Minus and 22 Min Plus.
And difference of Times does have an adverse business impact.
if syncronization without NTP is possible -- that would be great.
if not, how can we bring all the server nodes close to the real time.
Your suggestion and workaround will be appreciated to synchronize the times of three instances
as much possible with out hampering the Cluster Services.

onedbguru wrote:
I forget the name of it, but there is an executable that is used in Exadata clusters to do the same thing. Two standerd bash scripts I deploy to all RAC servers are called rac (for running a "RAC command" on all nodes) and raccp (for distributing a local file to all other RAC servers).
Uses ssh and scp and are quite useful. Want to see uptime for example? rac uptime. Want to distribute the updated ntp config? raccp /etc/ntp.conf.
Sadly though - no Exadata. There are 2 Exadata DB Machines in the corporate, but despite having one of the busiest databases on a self-build 12 node 3-yer old RAC, crunching data 24x7 for our corporate clients, no Exadata for us... Kind of like this Dilbert situation - total incompetence and requesting many millions are required.

How to populate the time component of a cube?

We have a question regarding how to populate the time component of a cube. Let me explain:
We are using OWB 10gR2. We have created a cube with several dimensions. We are now building the mapping to load the cube. The cube operator has two columns for every dimension (e.g., "customer" and "customer_id" for the "customer" dimension).
We understand that, in this case, "customer_id" stands for the dimension business key, so we create an arrow from the business key in the source table to the "customer_id" column in the cube operator.
So far so good. The mapping works all right, and the cube is loaded correctly.
Now we need to do the same for the time dimension. We have already created the time dimension and we have loaded it. We have also included it in the cube, so now we have two new columns in it: "time_day_code" and "time", both NUMBER data type.
We have the "sale_date" column (DATE data type), in the source system and, of course, now we want to populate the date column in the cube. We suppose that, somehow, we have to translate the "sale_date" field into the numeric column of the surrogate key of the time dimension. How should do we do this? I suppose that OWB must do the translation for us, just as it does for the other dimensions, but how? We have been looking into the manuals, and we have found no explanation on how to go about this.
Any help would be appreciated.
Best regards
Juan Algaba

Hi Juan
You are right this should have been in the manuals, checked and there is only a brief mention (Using a Time Dimension in a Cube Mapping section)
The identifier format should have been documented for each level and will involve creating the formatted attribute for input to the cube operator's time dimension reference attribute.
The time dimension business keys are stored as follows;
Day Level - YYYYMMDD
Month Level - YYYYMM
Week Level - YYYYWW
Quarter - YYYYQ
Year - YYYY
If you have a source that has a SQL date datatype for example and want to construct the key for a cube's time dimension at the day level something like the following expression can be used to construct the time reference from a SQL date...
to_number(to_char( time_key, 'YYYYMMDD'))
The result of this expression can be used as input to the cube's time dimension attribute.
Cheers
David

My 1st generation Time Capsule/2007 keeps shutting off and disconnecting from internet? What could be the problem? How long do the Time Capsules usually last?

My 1st generation Time Capsule/2007 keeps shutting off and disconnecting from internet? What could be the problem? How long do the Time Capsules usually last?

That it is still working is miraclous.. most have died.. lots started flaking out at 18months to 2years..
See deadtimecapsule.org
The few that remained now seem to have reached EOL.. you can repair if you have some skills.. fairly cheaply.
But it is well and truly time to replace.
https://sites.google.com/site/lapastenague/a-deconstruction-of-routers-and-modem s/apple-time-capsule-repair

How to display the time 00:00:00 as blank?

Dear Friends,
I have created a new field GDF_9000_CREATED_AT in the normal screen (dynpro), the format is TIMS, however, when there is no value for it, is always display like "00:00:00" on the screen.
So how to display the time 00:00:00 as blank in the normal screen (dynpro) when there is no value for it?
Thanks a lot!!

In screen PBO module:
        LOOP AT SCREEN.
          if screen-name EQ 'my_time' AND my_time EQ time_zero.
            screen-invisible = 'X'.
            screen-active = 0.
            MODIFY SCREEN.
          endif.
        ENDLOOP.
I don't try this, but i think is true...
Edited by: Marco Modenese on May 7, 2009 10:36 AM
Edited by: Marco Modenese on May 7, 2009 10:36 AM

How to display the time length of video (current time/ total time) ?

Hi,everyone. I would like to ask how to display the time length of the video which show only in system example: it show the current time and total time? using AS 3.0.
It there any information or solution to solve it? .
I appreciate it any of you able to answer it. ^^
Thank you.

Hi,
Actually I have this requirement for MAC OS 10.5. With the code you provided, I got the output as "6289375". When I changed the URL to point to my file (file:///Users/VPKVL/Desktop/MyRecord/tempAudio.wav), I am getting the below mentioned Exception:
Exception in thread "main" javax.sound.sampled.LineUnavailableException: Failed to allocate clip data: Requested buffer too large.
     at com.sun.media.sound.MixerClip.implOpen(MixerClip.java:561)
     at com.sun.media.sound.MixerClip.open(MixerClip.java:165)
     at com.sun.media.sound.MixerClip.open(MixerClip.java:256)
     at TestWavLength.main(TestWavLength.java:13)The "tempAudio.wav" file is created by using java sound API. I am using the SSB USB Headphone Set to record the audio with the following settings for AudioFormat object:
AudioFormat audioFormat = new AudioFormat(
          AudioFormat.Encoding.PCM_SIGNED, // the audio encoding
                                                        // technique
          48000.0F,// sampleRate the number of samples per second
          16, // sampleSizeInBits the number of bits in each sample
          2, // channels the number of channels (1 for mono, 2 for
                        // stereo, and so on)
          4, // frameSize the number of bytes in each frame
          48000.0F,// frameRate the number of frames per second
          false); // bigEndian indicates whether the data for a single
                        // sample is stored in big-endian byte order
                        // (false means little-endian)Can you please suggest where I am going wrong ?

Why doesn't siri know how to change the time of a reminder? When asked, "Do you want to confirm or cancel your reminder?" Reply, "Can I change the time to a half hour later?" Siri doesn't know how to respond.

Why doesn't siri know how to change the time of a reminder? When asked, "Do you want to confirm or cancel your reminder?" Reply, "Can I change the time to a half hour later?" Siri doesn't know how to respond.

Hi
In iMovie'11 (version 9.0.x)
on top menu row - Apple/iMovie/File/Edit/Cut (Can vary dep. on language - in Swedish Apple/iMovie/Arkiv/Redigera/Klipp . . . )
down Cut menu - Slow playback/Raspid Playback/Re-play in Slow Motion and onvards
Here one can select the Pre-Set speeds
Are you familiar with getting 'inspector' to run?
No - but I guess that Double Click on clip/sequense or ctrl-Click on it might open it.
Yours Bengt W

Web report for opening it takes long time how to reduce the time?

HI Experts,
I created report using webi. For next time while opening it takes more time. How to reduce the time.

Hi Manikandan,
There could be multiple reason behind the bad performance.
1. Are you using supported JVM version to run Webi reports?
2. Do the reports contain prompts? Are the LOVs set to "Automatic refresh before use"? If yes, uncheck it.
3. How many queries do the report has? Can you run the queries one by one and check which query is taking much time?
4. If it based on relational database, copy and run it against the database directly and check how much time it takes. If more, you may have to fix the issue at database level like using temporary tables, indices, etc.
5. Also check if there are firewalls or proxy server between client and server communication. if yes, try to refresh the report directly on BO server and check.
6. Check if there is any hinderance between BO server and Database server communcation.
Hope it will help.
Regards,
Yuvraj

How to display the time & battery % in home screen

How to display the time & battery % in home screen

Try resetting your device.
Hold down the Home and Sleep/Power Buttons until the Apple Logo shows up.
Ignore the red slider if it appears.
This will reboot the phone, no data should be lost.

Hey. anyone knows how to synchronize the different sounds in a song the most easy way?

hey. anyone knows how to synchronize the different sounds in a song the most easy way?

Play better... just kidding. Set an appropriate quantize value for all the regions in the inspector window. If you are doing live playing and need to synch to that it is MUCH more complicated. If you're new at this it might actually be easier to re-play it.

How to change the Time Zone in OAM log & audit files

Hi All,
I have OAM installed with all components. By default it is using the UTC Time Zone in the log files and Audit files.
Could any one please tell me how to change the Time according to the place ?
It is an urgent plzzz.
Thanks & Regards,
Vaasu.

could you find how to change the tine zone. i am also getting this problem
thanks

How to synchronize the mail automatically. With out clicking the mail icon ?

How to synchronize the mail automatically. With out clicking the mail icon ?

You can do that with the keyboard.
*<b>View > Zoom > Reset</b> (Ctrl+0 (zero); Cmd+0 on Mac)
*http://kb.mozillazine.org/Zoom_text_of_web_pages
There may be an extension that has a reset zoom button.
*https://addons.mozilla.org/en-US/firefox/search/?q=zoom
You can also create your own button and use this code to reset the zoom: <b>FullZoom.reset();</b>
*Custom Buttons: https://addons.mozilla.org/firefox/addon/custom-buttons/

How to extend the time line for the premiere on mac pro mavericks

how to extend the time line for the premiere on mac pro mavericks

Wrong place.
Try the Adobe Premiere forum.
http://forums.adobe.com/community/premiere
Good luck,
x

How to synchronize the time in NI 1776 smart camera

Similar Messages

Maybe you are looking for