How to take AME Backup
Can anyone please tell me how to take backup for AME which can be used in other instance
Regards,
Pradeep
Hi;
I dont have experience on it but FNDLOAD could be helpful
Please review below note and reference part
How To Migrate AME Setups From One Instance To Another [ID 1168883.1]
Also see:
Master Reference For AME Based Requisition Approval In R12 [ID 1207863.1]
Regard
Helios
Similar Messages
-
How to take a backup manually in oracle 11g express edition?
how to take a backup manually in oracle 11g express edition? i want to take backup of a database and want to restore later on on a different computer .
Stop database, and copy all files to another machine.That sounds to me to be the closest answer to the question posted. And perhaps the easiest solution.
Install XE on the "another machine", shut it down. Shutdown the source database. Copy the datafiles to the new host. Startup your "new" database, it will be an exact clone of the original.
To find out what files need to be copied, as system (or sysdba) run:
select name from v$datafile;
... file1, file2 ...
show parameter control
... control_files ... file1 ...
alter database backup controlfile to trace [reset logs];
show parameter diag;
... diagnostic_dest ... <drive:>|/diag_pathTo do a proper database clone its better to recreate the controlfile and reset the archive sequence number- leave out the controlfile copy part. In the diag_path location find the trace file under diag/rdbms/$ORACLE_SID/<db_name>/trace it should be the latest ora*.trc file.
The trace file has the commands to recreate the controlfile, which includes the datafiles and putting the tempfile back in place. If the datafiles are in a different location, i.e. in Windows going to a different drive, or you want do put datafiles in a different folder location, the create controlfile statement is the easiest time to get the file directories right.
If you add the "reset logs" qualifier (don't use the brackets!) you'll get just the reset logs version of the create controlfile statement, otherwise you'll get both NORESETLOGS and RESETLOGS versions of a create controlfile statement, run one or the other. Not both. Not the entire trace file, just the create controlfile, alter database open [reset logs], alter tablespace temp add tempfile ... bits. No recovery is needed for a database that is shutdown when datafiles get copied to a new location/host. -
Hi All,
Can you please tell me how to take schema backup.
DB : 10.2.0.2
Thanks in advance.1. 1. what is the time difference between for this two utilities to export the data for a schema, i.e "expdp" and "exp"?Go for EXPDP
2. If i using COMPRESSION option in "expdp" utility, how many times data size will be reduced to original size?When “Y”, export will mark the table to be loaded as one extent for the import utility. If “N”, the current storage options defined for the table will be used. Although this option is only implemented on import, it can only be specified on export.
3. 3. With out importing the data, how can i check the data which is exported, is correctly exported or not? You can do import with show=y option. This will not import any thing in the database. this will only generate the Sql file and your Export file can be validated. This will work similar to normal import except that this will not insert anything in the database.
Imp 'userid/password' fromuser=userid touser=userid show=y file=filename.dmp log=logfile.log
Regards -
HT1766 how to take message backup through icloud
Hii
Please tell me how to take message backup through icloud.
Thanks
KapilNot from iCloud, because it's just one updated backup.
I would also backup with your computer next time it's more reliable. -
How to take Auto backup from External Network Drive to Mac pro internal Dri
Hi,
I have a External Network Drive (Buffalo 1TB) which i use as a server, now i need to take auto backup from that external drive to the Mac i am working on, which has 2TB Internal hard Disk.
Please could anyone help me on this.....
Thanks in advanceIf you are looking to actually integrate what you have on the external one terabyte hard drive with the 2 TB hard drive you're using inside the Mac the best move for you if you want access to that data when using the Mac Pro server is going into utilities click on the top bar where it says go fall that down to the utilities told them that folder quickly once you are there you will see migration assistant click on that you will be asked to type your admin password to that. It will ask you "how do you want to transfer your information" then select from a Time machine backup or other disk when it asks you will be transferring information to your Mac Pro from your 1 Tb backup external hard drive once it's finished eject the drive or reformat it and use it again if your objective was to infect keep compress the data on the external so you have more space but do not have access to it I strongly recommend Carbon Copy Clone 3.3.1 is 100% free and does a fantastic job here is the link http://www.pure-mac.com/downloads/carboncopyclonerdl.html of copying every block to create an exact replica of your source hard drive. If you want something different and don't mind paying SuperDuper! is a great product as well this WebSite will have many options I would stick to carbon copy clone http://www.pure-mac.com/backup.html I also like EMC Retrospect backup and recovery software for the Mac it is a great product but very much on the expensive side for backup utilities although if you need word offers this might be right up your alley.
I hope I wasn't help,
Sincerely,
Thomas -
How to take the Backup of all XI-Design Objects(Repository, Directroty,SLD)
Deal All,
Actually I am facing problems with XI Server.
we have decided to reinstall the server. So, please tell me how to take the back up for all the scenarios that has been created in that. And also tell me how to take the back up for all the things.
Then how the backups can be used in Newly initialed XI-Sys.
Please help me.
Thanks in advance.
DanabHi,
In your IR and ID , you can export the Objects as TPZ files which can be reimported later.
To expoert, select the SWCV in your IR or the Configuartion Scenario in ID and then Tools --> Export and then specify the directoy in your XI server to which export should be done and then export the same.
Now, they will be available as TPZ files. When you need to reimport, tools --> Import and you can import.
Regards,
Bhavesh -
How lot take log backup using script in HANA
We have SAP HANA SPS09.
1) We are using script provided by SAP Note#1651055 to take the data backup.But it seems it is not taking log backup.HOw can we schedule logbackup ? or we have to use DBACOCKPIT or Studio only?
2) My DB is log_mode OVERWRITE.I have taken backup using script.But when I tried to check the backup using below command
hdbbackupdiag --check -f -d /mnt/resource/backup/xb8_bkp_19022015/ --logDirs /mnt/resource/logbackup/,/usr/sap/XB8/HDB00/backup/log
ERROR: [110081] Catalog backup log_backup_0_0_0_0 not found
goazr1app904d:/usr/sap/XB8/HDB00>
Is it like we have the DB in OVERWRITE mode thats why we are getting this error?Will my recovery work ?
Thanks,
MofizurDid your issue got resolved?
We are having same issue. We are on Rev 82 and using DD Boost EMC to take the backup using BACKINT.
Though we are on Rev 82 I tried option provided by Pavan which didn't worked for me.
hdbbackupdiag --check --useBackintForCatalog --backintDataParamFile /opt/ddbda/config/sap_hana_ddbda.utl -d /usr/sap/A0T/SYS/global/hdb/backint
ERROR: [110081] Catalog backup log_backup_0_0_0_0 not found
Regards,
Nitin -
hi,
i have database oracle 10 g rac on aix machine , my datbafiles r on SAN storage,
now i want to take cold backup of my database so tell me how to do it step by step while i cannot c the datafiles thoes r on san.
thxsneeraj19 wrote:
hi,
i have database oracle 10 g rac on aix machine , my datbafiles r on SAN storage,
now i want to take cold backup of my database so tell me how to do it step by step while i cannot c the datafiles thoes r on san.
thxs"while i cannot c the datafiles thoes r on san"
I guess that must some shorthand for "I cannot see the datafiles, those are on san."
If so, what does being on san have to do with being able to see the files?
In any event the answer to any question about "how do I backup" is the same .... RMAN. -
How to take RMAN backup through a single (default) channel
Sir,
In an interview I was asked a question that how can I allocate a single channel to multiple databases to take simultaneous backup. I was unanswer.
Pl. tell me if it is possible what will be the query with an example.
Regards
NeerajNo it's not at all possible to take backup of multiple database through the manually allocated channel.
Allocating the channel manually is only possible while running the commands in batch mode
eg. run {
allocate channel ch1 type disk format='/backup1/RMANBACKUP/PROD521_%s_%p';
allocate channel ch2 type disk format='/backup1/RMANBACKUP/PROD521_%s_%p';
backup database setsize=12582912;
release channel ch1;
release channel ch2;
And you can connect through single rman prompt to only one target database not more than that. So at any point of time you connect to only one database you can user channels to backup that database only.
connected to recovery catalog database
RMAN> CONN TARGET SYS/ORACLE@RMAN
RMAN> CONNECT TARGET SYS/ORACLE@RMAN
connected to target database: RMAN (DBID=1528877161)
RMAN> CONNECT TARGET SYS/ORACLE@CLS
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-06167: already connected
Edited by: sac on Sep 4, 2008 12:59 PM -
How to take list backup with lookup columns data in sharepoint 2010
Hi friends,
I have one issue on "Copy the list in one sitecollection to another sitecollection"
I have one list like "ABC" and with lookup column "Status" this column is looked to anthor list columns
My task is i want to Copy the same list with lookup columns with Data(lookup columns Data) in one site and restored in another site.
Error is Lookup columns Data is not coming.
How to Copied list with lookup columns data to restored in another list?
Badrii think there is no such method to move the list with lookup column.
couple of things which cause the failure, Number Source list may be not available on the target site collection, Column IDs / List IDs different from Site collection a to B.
I would try to use the backup of site collection and restore it, i am not sure whether it will work not.
i think copy the data from the lookup clomn in the excel, then move the list to different site collection with blank data then copy the data from excel to new list.
check this one for another idea:
http://blog.johnsworkshop.net/moving-lists-with-lookup-columns-inside-your-site-collection/
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog -
How to take client backup in development SAP server
Hi Expert,
I want to take backup Client Specific like (Ex.200) database. we are using SQL database.
1 Its very urget if possibe then please suggest me.
Points will be rewardable
Thanks @ Regards
Arpan SainiHi,
As far as i know a backup would be taken for the database completely,there is no such option to backup a single client.
If you want to backup a client there is no other option rather than backing up the sap system,as far as i know.
Regards,
Vamshi. -
How to take full backup with expdp
two node rac
5 node application
windows
version 10.2.0.4
can you please correct me below query to take full backp with expdp
expdp directory=datapump_dir dumpfile=full_dbexp.dmp logfile=expdp_full.log full=y856483 wrote:
any suggestions plsPatience, Grasshopper
You posted this follow-up a mere NINE minutes after your previous post.
This forum is not a chat line, and it is not paid support.
No one is responsible for monitoring it and giving a quick response.
Furthermore, it is a global forum. The person with the information you seek may very well live 20 time zones away from you and was going to bed just as you posted. He will not even see your post for several more hours.
Your original post went up in the middle of the night for half the world.
No one with the information you seek is deliberately withholding it until you sound sufficiently desperate. -
Oracle 11g R2 how to take exp/imp
hi.. i am using oracle11.2 version. i am try to take logical backup like "EXP" in linux environment but empty table missed out..
can u say how to take this backup with empty tables...
Thanks in advanceHello,
i am try to take logical backup like "EXP" in linux environment but empty table missed outIt's due to a new feature in 11.2. By default the Parameter DEFERRED_SEGMENT_CREATION is set to TRUE, so that Segments are just created when the first row is inserted:
http://download.oracle.com/docs/cd/E14072_01/server.112/e10820/initparams069.htm
Please, use the DATAPUMP Export/Import instead of the Original Export/Import. The DATAPUMP manages better this new feature. You'll have an example below:
http://asktom.oracle.com/pls/apex/f?p=100:11:0::::P11_QUESTION_ID:3014631100346711923
You'll find on the following link some advices to start with DATAPUMP:
http://www.oracle-base.com/articles/10g/OracleDataPump10g.php
Hope this help.
Best regards,
Jean-Valentin -
How to take backup in external harddisk
Dear All,
For takeing backup on external harddisk. i do the following step:-i open MS server managment Start>Programes>Microsoft SQL Server Stuido--> Connect to the SAP Server Instance for which want to take the Backup of the Database, then ->Server Object>Backup Devices--here i found R3DUMP0,R3DUMP1,R3DUMP2.For taking the backup i have create new backup device R3DUMP3 ->BACKUP DATABASE->DESCRIPTION->ADD .When i add my external harddisk leter it give error-:
get an immediate error (see below). Note, the 2nd error message is specifying the existing backup disk file, not the new one I'm attempting to create.
"Backup failed for Server 'prod''. (Microsoft.SqlServer.Smo)"
"System.Data.SqlClient.SqlError: The volume on device 'D:\Program Files\Microsoft SQL R3DUMP(I:\RECYLER\S-1-5-21-28534555-1417863153-500\DBFULLBACKUP.BAK' is not part of a multiple family media set. BACKUP WITH FORMAT can be used to form a new media set. (Microsoft.SqlServer.Smo)"
Does anyone know what causes this and how to correct it?
Regards
AshokDear All,
For takeing backup on external harddisk. i do the following step:-i open MS server managment Start>Programes>Microsoft SQL Server Stuido--> Connect to the SAP Server Instance for which want to take the Backup of the Database, then ->Server Object>Backup Devices--here i found R3DUMP0,R3DUMP1,R3DUMP2.For taking the backup i have create new backup device R3DUMP3 ->BACKUP DATABASE->DESCRIPTION->ADD .When i add my external harddisk leter it give error-:
get an immediate error (see below). Note, the 2nd error message is specifying the existing backup disk file, not the new one I'm attempting to create.
"Backup failed for Server 'prod''. (Microsoft.SqlServer.Smo)"
"System.Data.SqlClient.SqlError: The volume on device 'D:\Program Files\Microsoft SQL R3DUMP(I:\RECYLER\S-1-5-21-28534555-1417863153-500\DBFULLBACKUP.BAK' is not part of a multiple family media set. BACKUP WITH FORMAT can be used to form a new media set. (Microsoft.SqlServer.Smo)"
Does anyone know what causes this and how to correct it?
Regards
Ashok -
How to take remote disk backup on AIX
Dear All,
I want to take a disk backup of our Development system. I will take the backup on an USB external HDD
which is connected to a Windows XP system. Both the Windows XP and DEV system are on same local network. The external HDD has NTFS file system and has been shared. The server is on AIX 5.3 with oracle 10.2.0.1 with SAP ECC 6.0. Since I am new to AIX Operating System and have little knowledge about AIX, I am unable to access the shared disk in my AIX box. Once I will able to access the shared disk in the AIX system i.e. in the Development server and then only I can configure the corresponding file at SAP level and could take the backup. Please help me how to access the corresponding shared disk from AIX and what configuration I have to do at SAP level for taking disk backup.
Regards
SamirHi 844795,
See this thread:
Re: Backup of OCR and voting disk
The fastest way to find your answer in the forum is to use the forum search.
https://forums.oracle.com/forums/search.jspa?threadID=&q=backup+votedisk&objID=c140&dateRange=last90days&userID=&numResults=15&rankBy=10001
Cheers,
Levi Pereira
It's good etiquette, when your question has been answered to mark it as answered, and mark posts as "correct" or "helpful". Read about
Edited by: Levi Pereira on Nov 21, 2011 2:41 PM # This reply was to user 844795.
Maybe you are looking for
-
Problem when calling a return type BOOLEAN SQL Function in a package
Hi All, I am having problem when trying to call a SQL function in a package with return type BOOLEAN The SQL function signature is as follows CREATE OR REPLACE PACKAGE RMSOWNER.ORDER_ATTRIB_SQL **** FUNCTION GET_PO_TYPE_DESC(O_error_message IN OUT VA
-
When I was downloading the latest version of itunes on my pc the update failed. I can no longer acces itunes. How can I update the software without overwriting my current itunes libraries? Thanks
-
Adobe Air not allowing installation of new program
Hello, I recently purchased a new Lenovo Thinkpad laptop running Windows 7 and when I attempt to install my school review program, I get this error message: "The application could not be installed because the installer file is damaged. Try obtaining
-
Software OS X 10.9.4 is this Mavericks
I can't find a description of what OS i have, I find that the software is Software OS X 10.9.4, is this meaning I have Maverick OS?
-
2 SATA RAID drivers come with Neo4?
I don't get it.. The Neo4 comes with 2 floppy disks. One SATA RAID Driver from Silicom Image, and one from nVidia. Why 2, is one better than the other? And why do I need to install it? I don't use RAID, I only have one SATA disk in my system. Yet "RA