How to take the back up of a site

Hi Experts,
I am working with Webcenter sites 11gR1.
I created a site, I want to do some more modifications.
Before that i want to take the back up of that site at this instance.
If something goes wrong in future i want use this Backup.
Is it possible in webcentes sites, If possible could someone help me out...
Is there any Backup/Recovery mechanism exists?
Thanks in Advance,
Rajendar

Ah, if you wanted to do that you would need more than just the Shared FS and DB backed up.
You would also need a copy of the war and a copy of the application home directory.
There is a doc that describes all this called WebCenter Sites Backup and Recovery guide that describes what you need

Similar Messages

How to take the back up of MPOS and planning area

Hi Gurus ,
i am using apo dp version 5.0 .We are trying to adding a new key kigfigures in our planning object structure and planning area .
so,we are trying take a back up of our Planning objects structure and planning Area .
1.How to take the back up of MPOS and Planning area ?
2. How loading back the data in to the same MPOS and Planning area after adding some keyfigures to MPOS and planning area.?
I gone thru the www.help.sap.com but i did not understand properly .
I would really appreciate if somebody clearly eleborate the procedural steps .
Thanks!
Kriss.

Hi Kriss,
First let me clear you some points.
1. MPOS always contain characteristcis only not the key figures.
2. Planning area always contain Key figures.
3. When you create planning area at that you have to assign MPOS & Storage bucket Profile. So Automatcially Characteristcis, Key figures & Time charcteristics realetion mentained.
Come to your point.
1. Before creating data source which is depend up on Planning area, you should sure that your basic structure get finalized say, MPOS, Planning area & rest configuration setting. So if you think there will be some extra key figure required after finalizing planning area then in that case you can creat some extra key figure & adding to planning area before finalizing it. So that you can use these key figure in future also.
What ever data you want to extract from planning area you required whole data extraction process. So whenever you create data source depend up on planning area then automatcially all the info Objects( Char. key figures, time char. ) come in to data source by default. So further you have to replicate it in to APO BW & create rest data extraction process depneds up on data source. So automatcially all the info objects come in to an Info Cube & your extraction process will wrk fine.
2. Relignment can effect on data transfer from Info Cube to Planning area becz previously your charcteristcis values are different & you had taken back with those characteristcis values, now if you did relignment then charcteristcis values are suppose to be changed, so while loading data from Info cube to Planning area your charcteristcis values will not match & data will not load for those char. values only.
See, Data always stored in to planning area ( Live cache) against characteristcis, Key figures & time characteristcis. Data is not stored in to MPOS.
Hope this will help you
Regards
Sujay

How to take the back of all the Projects from PWA 2007 to PWA 2012

I had already created projects in PWA 2007 and i want to take the backup of all the projects in PWA 2013 .how to do that .Please reply soon.

Hi,
assuming you want to use Project Server 2013 (there is no 2012).
If you want to get everything from 2007 into 2013, you should perform a migration:
https://technet.microsoft.com/en-us/library/ee662496(v=office.15).aspx,
https://technet.microsoft.com/en-us/library/ff603507(v=office.15).aspx, and
https://technet.microsoft.com/en-us/library/ff603507(v=office.15).aspx#section3
If you only need to get certain projects, you can save them as local file from 2007 and re-save them to 2013.
Does that help?
Barbara
To increase the value of this forum, please mark the replies that helped to solve your issue as answer. If you find answers to questions from other forum participants to be helpful, please mark them as helpful. Your participation will help others to find
an appropriate solution faster. Thanks for your support!

How to take the Backup of all XI-Design Objects(Repository, Directroty,SLD)

Deal All,
Actually I am facing problems with XI Server.
we have decided to reinstall the server. So, please tell me how to take the back up for all the scenarios that has been created in that. And also tell me how to take the back up for all the things.
Then how the backups can be used in Newly initialed XI-Sys.
Please help me.
Thanks in advance.
Danab

Hi,
In your IR and ID , you can export the Objects as TPZ files which can be reimported later.
To expoert, select the SWCV in your IR or the Configuartion Scenario in ID and then Tools --> Export and then specify the directoy in your XI server to which export should be done and then export the same.
Now, they will be available as TPZ files. When you need to reimport, tools --> Import and you can import.
Regards,
Bhavesh

How do you take the back off to insert sim card, how do you take the back off to insert sim card

how do i take the back of the cover off to insert sim card?

With an iPhone you don't need to take the back cover off (attempting to do so may damage the device). Instead look around the edges of the iPhone for the SIM tray. On an iPhone 4 the tray is located on the right hand side of the device, and on all other models it is on the top edge. Simply insert the end of a paperclip into the hole on the SIM tray and push gently.

HT5262 how long does the back up take?

How long does the back up take?

Welcome to the Apple Support Communities
It depends of the space your iPhone, iPod touch or iPad has to back up on iCloud. You can see what's backed up in Settings > iCloud > Storage and Backup > Manage Storage, and select the backup, so you will be able to choose what you want to back up. The device will back up automatically when it's connected to the power adapter

Can you take the back off of the iphone 4 to get to the battery, if so how, mine has no screws at all

i plugged my phone into itunes and my phone is in recovery mode, is ther a way i can just take the back off and take the battery out, i tried looking for videos on youtube but all the phones had screws on the outside where mine does not.

You cannot remove the iPhone battery. The screws are pentalobe screws which need a special screwdriver and they are located on the bottom of the iPhone on each side of the 30 pin connector port.
Disconnect the iPhone from the USB cable and press and hold the Home and Power buttons together until the Apple logo appears.

How to take the cron job log in HP UX?

Hi,
How to take the cron job log in HP UX
I need to run a backup and other stuff everyday. How do I check and start cron service under HP-UX UNIX operating system? How do I write cron jobs?
A. Cron service is required to run jobs and tasks such as backup.
You must login as the root to run following commands. Each user that is using the cron service must have a cron configuration file in the /var/spool/cron/crontab directory. Also users are permitted if their name appeared in /var/adm/cron/cron.allow file
Task: Find out if cron is running under HP-UX
Type the following command at a shell prompt
# ps -ef | grep cron
Open /etc/rc.config.d/cron file
vi /etc/rc.config.d/cron
Set control variable to 1 to enable cron: CRON=1
Set control variable to 0 to disable: CRON=0
Close and save the file. To start or stop cron you can type the following command:
# /sbin/init.d/cron start <-- start cron
# /sbin/init.d/cron stop <-- stop cron
Task: HP-UX Start cron service
If cron is not running, simply type:
# cron
Task: Edit / create cron jobs
Type the following command to submit a cron job:
# crontab -e
List your cron file:
# crontab -l
Backup all your cron jobs:
# crontab -l > ~/backup.cron.jobs
Remove ALL cron job:
# crontab -r
Task: Crontab file format
Cron file format is as follows:
MIN HOUR DATE MONTH DAY /PATH/TO/COMMAND
0-59 0-23 1-31 1-12 0-6 /root/scripts/backup2tape.shEasy to remember crontab file format:
* * * * * command to be executed
| | | | |
| | | | ----- Day of week (0 - 7) (Sunday=0 or 7)
| | | ------- Month (1 - 12)
| | --------- Day of month (1 - 31)
| ----------- Hour (0 - 23)
------------- Minute (0 - 59)To run /root/script/backup at 23:00, every day, enter:
# crontab -e
Append following
0 23 * * * /root/script/backupRun foo job very weekday (MON-Fri) at 6am, enter:
0 6 * * 1-5 /root/script/backupFor more information refer to cron and crontab man pages.
Subscribe to our free e-mail newsletter or RSS feed to get all updates. You can Email this page to a friend.
Related Other Helpful FAQs:
What is Cron?
Linux Start and stop the cron or crond service
Run crontab Every 10 Minutes
Linux / UNIX Setup and run php script as a cron job
Stop Ubuntu / Debian Linux From Deleting /tmp Files on Boot
Discussion on This FAQDavid Says:
January 15th, 2008 at 12:21 am
You might note that all files normally found in /etc/init.d, /etc/rc*.d, and others are all in /sbin in HP-UX 10.20 and up.
Note too that your formatting is off in the description of the /etc/rc.config.d/cron file. Also, if you run /usr/bin/cron instead of /sbin/init.d/cron start, the /etc/rc.config.d/cron file is not used.
Regards,
Satya

I guess it would :)
btw, how did this piece miss from the contents pasted by the OP ?
The doc has given all details of CRON and missed where to see the logfiles. :)
****Added****
I tried man crontab in windows, i dont see it.i overlook most of the things, i would have done the same ;)
Edited by: Bobcatalog on Oct 23, 2008 9:40 AM

How to schedule the back job scheduling

how to schedule the back job for bdc , can we use it for both call transaction and session method . how to schedule the back job schedulinng for lsmw

hi,
Use t-code SM36 for scheduling.
Do reward.

Does anyone know how to delete the back up for the ipod? I am getting an error message that says "iTunes could not back up iPod because it is corrupt or not compatible with iPod; delete back up and try again"

does anyone know how to delete the back up for the ipod? I am getting an error message that says "iTunes could not back up iPod because it is corrupt or not compatible with iPod; delete back up and try again"

Go to iTunes>Preferences>Devices and highlight the backup you want to delete and click on Delete Backup

How to take the data from sage system to sap r/3

hi expects,
how to take the data from sage system to sap r/3? which adapter is to be used?what is the format of data in sage system?how the scenarios will work ? please help me in solving this problem?

hi rohit,
the data transfer can be done by using SOAP adapter
do chk this link
http://www.sage.org/lists/sage-members-archive/2001/msg01718.html
http://www.sage.org/lists/sage-members-archive/2001/msg01739.html
thanx
Sampath

How to suppress the back-ground execution of a query in design mode

hi guys,
there is a bahaviour of the system, that I'd like to change. So, when we
1. start EXCEL
2. go to the designer mode to create a report
3. first drop an InfoProvider (e query) into a cell,
4. second - pull e.g a filter element into another cell, still being in the design mode.
Just in this moment, the query itself has been already started in the back groud, aiming to fill the cache, I guess.
Does anyone know how to suppress the back-ground execution? I'd like to control, when to start the reports execution.
Thanks in advance.
Neven

Hello,
There is no way to do that if you are creating thru BEx Analyzer.
Instead use the BEx Analyzer, try to create using directly BEx Query Designer.
In that way, the query will not be executed, until you want to...
Thank you
Edward John

How to take the screen shot of my computer page by using Labview.... is there any funtions available in Labview?

How to take the screen shot of my computer page by using Labview.... is there any funtions available in Labview?

Another thread about this theme.
Waldemar
Using 7.1.1, 8.5.1, 8.6.1, 2009 on XP and RT
Don't forget to give Kudos to good answers and/or questions

Please help me how to take the "Spot Color" in illustrator?

Hi,
Please help me how to take the "spot color in illustrator CS" using vb script (or) java script.
Regards,
Prabudass E.

Prabudass, If you are just wanting to see if the illustrator file uses spot colors - run the Delete Unused Panel items from the default actions. then view the swatch palette in small or large List View. The color names that have a square containing a gray circle (spot) to the right of their color names are spot colors. The following will get the spot color name of an existing swatch named "Color1" and change it to "Nicks Swatch" and will assign the CMYK values stated. if (app.documents.length > 0){ var swatches = app.activeDocument.spots; for(i=0;i<swatches.length;i++){ var currSwatch = swatches[i]; if(currSwatch.name == "Color1") {currSwatch.name = "Nicks Swatch"; var newColor = new CMYKColor(); newColor.cyan = 35; newColor.magenta = 0; newColor.yellow = 50; newColor.black = 0; currSwatch.color = newColor; } }} When this script has run the swatch palette will not immediately reflect the changes to the swatch name until you double click on a swatch and click OK or Cancel in the Edit Swatch dialog. I hope that I have understood your question correctly and that these responses are helpful. Good Luck Nick

Daughter's iPod touch went through the washer. Do i need to take the back off somehow before I try putting it in rice?

Daughter's iPod touch went through the washer. Do i need to take the back off somehow before I try putting it in rice?

No. Just put it in rice as is.
You may have success in getting it to boot after using the rice technique, but it will sincerely doubtfully never fully function again.

How to take the back up of a site

Similar Messages

Maybe you are looking for