How to take the back up of  MPOS and planning area

Hi Gurus ,
i am using apo dp version 5.0 .We are trying to adding a new key kigfigures in our planning object structure and planning area .
so,we are trying  take a back up of our Planning objects structure and planning Area .
1.How to take the back up of MPOS and Planning area  ?
2. How loading back the data in to the same MPOS and Planning area after adding some keyfigures to MPOS and planning area.?
I gone  thru the www.help.sap.com but i did not understand properly .
I would really appreciate if somebody clearly eleborate  the procedural steps .
Thanks!
Kriss.

Hi Kriss,
  First let me clear you some points.
1. MPOS always contain characteristcis only not the key figures.
2. Planning area always contain Key figures.
3. When you create planning area at that you have to assign MPOS & Storage bucket Profile. So Automatcially Characteristcis, Key figures & Time charcteristics realetion mentained.
Come to your point.
1. Before creating data source which is depend up on Planning area, you should sure that your basic structure get finalized say, MPOS, Planning area & rest configuration setting. So if you think there will be some extra key figure required after finalizing planning area then in that case you can creat some extra key figure & adding to planning area before finalizing it. So that you can use these key figure in future also.
    What ever data you want to extract from planning area you required whole data extraction process. So whenever you create data source depend up on planning area then automatcially all the info Objects( Char. key figures, time char. ) come in to data source by default. So further you have to replicate it in to APO BW & create rest data extraction process depneds up on data source. So automatcially all the info objects come in to an Info Cube & your extraction process will wrk fine.
2. Relignment can effect on data transfer from Info Cube to Planning area becz previously your charcteristcis values are different & you had taken back with those characteristcis values, now if you did relignment then charcteristcis values are suppose to be changed, so while loading data from Info cube to Planning area your charcteristcis values will not match & data will not load for those char. values only.
    See, Data always stored in to planning area ( Live cache) against characteristcis, Key figures & time characteristcis. Data is not stored in to MPOS.
Hope this will help you
Regards
Sujay

Similar Messages

  • How to take the back up of a site

    Hi Experts,
    I am working with Webcenter sites 11gR1.
    I created a site, I want to do some more modifications.
    Before that i want to take the back up of that site at this instance.
    If something goes wrong in future i want use this Backup.
    Is it possible in webcentes sites, If possible could someone help me out...
    Is there any Backup/Recovery mechanism exists?
    Thanks in Advance,
    Rajendar

    Ah, if you wanted to do that you would need more than just the Shared FS and DB backed up.
    You would also need a copy of the war and a copy of the application home directory.
    There is a doc that describes all this called WebCenter Sites Backup and Recovery guide that describes what you need

  • How to take the back of all the Projects from PWA 2007 to PWA 2012

    I had already created projects in PWA 2007 and i want to take the backup of all the projects in PWA 2013 .how to do that .Please reply soon.

    Hi,
    assuming you want to use Project Server 2013 (there is no 2012).
    If you want to get everything from 2007 into 2013, you should perform a migration:
    https://technet.microsoft.com/en-us/library/ee662496(v=office.15).aspx,
    https://technet.microsoft.com/en-us/library/ff603507(v=office.15).aspx, and
    https://technet.microsoft.com/en-us/library/ff603507(v=office.15).aspx#section3
    If you only need to get certain projects, you can save them as local file from 2007 and re-save them to 2013.
    Does that help?
    Barbara
    To increase the value of this forum, please mark the replies that helped to solve your issue as answer. If you find answers to questions from other forum participants to be helpful, please mark them as helpful. Your participation will help others to find
    an appropriate solution faster. Thanks for your support!

  • How to take the movies off of iPhoto and move them to my external hard drive

    My hard drive in the computer is dying. I am using time machine to back up everything to my external hard drive. However, I am not sure it will take the movies from my iphoto.
    1. When I try and export my movies from Iphoto to my external hard drive it only allows me to export as jpeg not .mov
    2. When i just drag them the whole movies is not there.
    I really need help to do this asap as my computer keeps freezing and clicking now more often.
    Thank you

    To export a movie you must export it as kind is original otherwise you get the single frame JPEG preview
    and you should backup the entire iphoto library by dragging it intact as a single entity to a hard drive formatted Mac OS extended (journaled)
    LN

  • How to take the Backup of all XI-Design Objects(Repository, Directroty,SLD)

    Deal All,
          Actually I am facing problems with XI Server.
    we have decided to reinstall the server. So, please tell me how to take the back up for all the scenarios that has been created in that. And also tell me how to take the back up for all the things.
    Then how the backups can be used in Newly initialed XI-Sys.
    Please help me.
    Thanks in advance.
    Danab

    Hi,
    In your IR and ID , you can export the Objects as TPZ files which can be reimported later.
    To expoert, select the SWCV in your IR or the Configuartion Scenario in ID and then Tools --> Export and then specify the directoy in your XI server to which export should be done and then export the same.
    Now, they will be available as TPZ files. When you need to reimport, tools --> Import and you can import.
    Regards,
    Bhavesh

  • For some reason my Itunes deleted my current library and reverted back to a library from 5 years ago! How do I take the music from my Iphone and put it back into my Itunes library?

    For some reason my Itunes deleted my current library and reverted back to a library from 5 years ago! How do I take the music from my Iphone and put it back into my Itunes library?

    backup from old computer and restore to new either to icloud  or an external drive  also check out turingtest2's excellent article on backup using synctoy

  • How do you take the back off to insert sim card, how do you take the back off to insert sim card

    how do i take the back of the cover off to insert sim card?

    With an iPhone you don't need to take the back cover off (attempting to do so may damage the device). Instead look around the edges of the iPhone for the SIM tray. On an iPhone 4 the tray is located on the right hand side of the device, and on all other models it is on the top edge. Simply insert the end of a paperclip into the hole on the SIM tray and push gently.

  • HT5262 how long does the back up take?

    How long does the back up take?

    Welcome to the Apple Support Communities
    It depends of the space your iPhone, iPod touch or iPad has to back up on iCloud. You can see what's backed up in Settings > iCloud > Storage and Backup > Manage Storage, and select the backup, so you will be able to choose what you want to back up. The device will back up automatically when it's connected to the power adapter

  • Can you take the back off of the iphone 4 to get to the battery, if so how, mine has no screws at all

    i plugged my phone into itunes and my phone is in recovery mode, is ther a way i can just take the back off and take the battery out, i tried looking for videos on youtube but all the phones had screws on the outside where mine does not.

    You cannot remove the iPhone battery. The screws are pentalobe screws which need a special screwdriver and they are located on the bottom of the iPhone on each side of the 30 pin connector port.
    Disconnect the iPhone from the USB cable and press and hold the Home and Power buttons together until the Apple logo appears.

  • How do I remove the cover to access the back of my 5c and insert the sim

    How do I remove the cover of my 5c in order to access the back of the phone to insert the sim?

    You DON'T remove the cover to access and insert the sim card in the the phone.
    The sim card tray on an iPhone is either at the top of the phone or on the side of the phone - just look at the top and then use the sim card tool that came with your phone and this will open the sim card tray.  You have no need to take the back off your phone whatsoever and has already been pointed out, if you do so, you warranty is voided, as the casing of iPhones are NOT designed to be removed.

  • How do i take the music from my ipod and transfer it permanently onto my PC's itunes?

    How do i take the music from my ipod and transfer it permanently onto my PC's itunes?

    If you were using a Mac you could use a program but AFAIK there is nothing similar yet for the PC.
    However, you should have a backup of your music, correct? Just restore from that backup to your computer (and, if not, at least this will teach you the importance of always backing up your music purchases onto writable media like DVD).

  • I had renamed my user login name and assumed that there will be no change in the settings and files. When I login with the new profile name everything is gone. How can I get back all my files and settings?

    I had renamed my user login name and assumed that there will be no change in the settings and files. When I login with the new profile name everything is gone. How can I get back all my files and settings? Please help. Thanks.

    You should have asked this before you tried: Changing username or short name- User Account and Short Name- OS X- How to change user account name or home directory name.

  • How to take the cron job log in HP UX?

    Hi,
    How to take the cron job log in HP UX
    I need to run a backup and other stuff everyday. How do I check and start cron service under HP-UX UNIX operating system? How do I write cron jobs?
    A. Cron service is required to run jobs and tasks such as backup.
    You must login as the root to run following commands. Each user that is using the cron service must have a cron configuration file in the /var/spool/cron/crontab directory. Also users are permitted if their name appeared in /var/adm/cron/cron.allow file
    Task: Find out if cron is running under HP-UX
    Type the following command at a shell prompt
    # ps -ef | grep cron
    Open /etc/rc.config.d/cron file
    vi /etc/rc.config.d/cron
    Set control variable to 1 to enable cron: CRON=1
    Set control variable to 0 to disable: CRON=0
    Close and save the file. To start or stop cron you can type the following command:
    # /sbin/init.d/cron start <-- start cron
    # /sbin/init.d/cron stop <-- stop cron
    Task: HP-UX Start cron service
    If cron is not running, simply type:
    # cron
    Task: Edit / create cron jobs
    Type the following command to submit a cron job:
    # crontab -e
    List your cron file:
    # crontab -l
    Backup all your cron jobs:
    # crontab -l > ~/backup.cron.jobs
    Remove ALL cron job:
    # crontab -r
    Task: Crontab file format
    Cron file format is as follows:
    MIN HOUR DATE MONTH DAY /PATH/TO/COMMAND
    0-59 0-23 1-31 1-12 0-6 /root/scripts/backup2tape.shEasy to remember crontab file format:
    * * * * * command to be executed
    | | | | |
    | | | | ----- Day of week (0 - 7) (Sunday=0 or 7)
    | | | ------- Month (1 - 12)
    | | --------- Day of month (1 - 31)
    | ----------- Hour (0 - 23)
    ------------- Minute (0 - 59)To run /root/script/backup at 23:00, every day, enter:
    # crontab -e
    Append following
    0 23 * * * /root/script/backupRun foo job very weekday (MON-Fri) at 6am, enter:
    0 6 * * 1-5 /root/script/backupFor more information refer to cron and crontab man pages.
    Subscribe to our free e-mail newsletter or RSS feed to get all updates. You can Email this page to a friend.
    Related Other Helpful FAQs:
    What is Cron?
    Linux Start and stop the cron or crond service
    Run crontab Every 10 Minutes
    Linux / UNIX Setup and run php script as a cron job
    Stop Ubuntu / Debian Linux From Deleting /tmp Files on Boot
    Discussion on This FAQDavid Says:
    January 15th, 2008 at 12:21 am
    You might note that all files normally found in /etc/init.d, /etc/rc*.d, and others are all in /sbin in HP-UX 10.20 and up.
    Note too that your formatting is off in the description of the /etc/rc.config.d/cron file. Also, if you run /usr/bin/cron instead of /sbin/init.d/cron start, the /etc/rc.config.d/cron file is not used.
    Regards,
    Satya

    I guess it would :)
    btw, how did this piece miss from the contents pasted by the OP ?
    The doc has given all details of CRON and missed where to see the logfiles. :)
    ****Added****
    I tried man crontab in windows, i dont see it.i overlook most of the things, i would have done the same ;)
    Edited by: Bobcatalog on Oct 23, 2008 9:40 AM

  • How to schedule the back job scheduling

    how to schedule the back job for bdc , can we use it for both call transaction and session method . how to schedule the back job schedulinng for lsmw

    hi,
    Use t-code SM36 for scheduling.
    <b>Do reward.</b>

  • Does anyone know how to delete the back up for the ipod? I am getting an error message that says "iTunes could not back up iPod because it is corrupt or not compatible with iPod; delete back up and try again"

    does anyone know how to delete the back up for the ipod? I am getting an error message that says "iTunes could not back up iPod because it is corrupt or not compatible with iPod; delete back up and try again"

    Go to iTunes>Preferences>Devices and highlight the backup you want to delete and click on Delete Backup

Maybe you are looking for