How to tell if cc 2014 has installed properly

I updated photoshop today expecting the advertised new functions to be installed on my computer and after the installation I checked if the new select feature based on focus was available and discovered that it was not present in the menu. Any one has any ideas?
Kind regards
Michael

Hi Michael
It is working fine for me. The update is in fact a new installation which installs in a Photoshop CC 2014 folder. So you may need to set up a new shortcut or alias to launch the application.

Similar Messages

How to tell if SMC firmware is installed properly...

Hi
I live a bit far from my Apple Store so I thought I'd ask on the forum before I did the whole Genius Bar - back- and - forth trip.
I recently had my logic board replaced along with a rattling fan.
After which i found my MBP (2.16 core duo from last july) to run much quieter and cooler. I noticed that my fans came on more often and heard them come on.
Everything seemed fine. Then I had my bottom casing replaced (because of a scratch I found after having my logic board replaced -- which i wasn't too happy about but AppleCare helped me out).
After picking up my MBP again. It seems like the fans dont come on as often anymore and the temperatures are as high as it was before i got my logic board replaced--but i don't hear a noise.
Would anyone know if there is a way to check if the SMC firmware update is properly installed? I am wondering why the fans dont come on as often . I've been using SMC fan control lately which helps but I would rather my MBP control its own temperature without me having to adjust the fan speeds. It woudl be most helpful when running programs in Windows XP bootcamp mode.
Any advice would be great thanks.
Love O.

If it helps to know the fan speed, you might try Hardware monitor: http://www.bresink.de/osx/HardwareMonitor.html
The fans could be running at low speeds, in which case it's very soft. To really hear it, you can add load, say by opening a terminal and running
yes > /dev/null
That should use up CPU, raise temperature, increase fan speed and you should be able to hear it. If the max temperature is much higher than before or the fans really don't get switched on, then I would talk to Apple.

How can I tell if Adobe Flash is installed properly and upto date version?

How can I tell if Adobe Flash is installed properly and upto date version?
Hi Guys and girls, hopefully an easy question for you.
I installed Adobe flash and lightsource last night, cos I needed it to run Weebly website maker.
Anyone know if Weebly runs correctly on 10.9.1??
I have a new comp, so no previous version of flash on here, I am running OSX 10.9.1
I just want to know How I can tell if Adobe Flash is installed properly and is the upto date version?
Where do I go in the comp to find out,
If I type in Adobe flash into search it only brings up flash manager, when I click this it is an uninstaller program.
Lightsource shows in finder apps.
If I type in flash player it shows up in plugins with a version number see screen shot.
Where would I go to check for updates for things like flash on my comp?
Thanks Team,
Jason in oz. :?):)

1. Safari > Preferences > Security > Internet Plug-ins
Allow Plug-ins
2. Go to this Adobe site to check. You will see the animation above the tree.
How to know whether AdobeFlash Player is installed
http://helpx.adobe.com/flash-player.html?promoid=ISMRY

How do I know if Mountain Lion has installed properly?

How do I know if Mountain Lion has installed properly?

I can only guess that the install process was interrupted, maybe after the files were extracted but before the install, maybe on the reboot?
If it was dome ot would say version 10.8. And you would have the reminder and notes apps as well, also an easy thing to check.

How to judge whether the client has installed AcrobatReader?

How to judge whether the client has installed AcrobatReader?

Hi,
first check the client copy log using scc3->all clients
under target client you can identify which client is generated by client copy.
the remaining client is only created using SCC4 ( exclude 000,001,066 )
regards,
kaushal

How to tell what Service Pack is installed?

Hello, can anyone tell me how to determine what service pack is installed on my computer? I am running Crystal Reports XI Release 2 .NET 2005 Server.
Thanks in advance!
Tim

Hello Kultar, this did not work for me but something that I did find to work was a registry setting. The setting is:
HKEY_LOCAL_MACHINE\SOFTWARE\Business Objects\Suite 11.5\Report Application Server\Viewer
The subkey is PrintControlVersion which should have a value of "11,5,10,1263"
Best regards,
Tim

How to tell if a user has logged in to teststand

I am using a custom LV UI. I would like to know if there is a way to tell if the user has clicked the cancel button on the standard TS login. I would like to keep using the standard TS login if possible.
Thanks
Joe.
"NOTHING IS EVER EASY"

Hi Joe,
Unfortunately, the default TestStand login code uses a TestStand engine method (DisplayLoginDialog) to handle this dialog box. The method returns a user object based on the user's selections, and cannot be modified. However, a clone of theTestStand login code developed in LabVIEW can be downloaded from the developer zone. This set of VIs does not use this method, and will allow you to configure what data is returned by the dialog.The files can be downloaded here:
LabVIEW based Login Reference Example for Teststand
Let me know if you need any help configuring this code, and I'll be happy to help!
Al B.
Staff Software Engineer - TestStand
CTA/CLD

How to tell if your mac has water damage?

I was using a dust remover when I noticed that some ice like substance started to come out. I was spraying the USB and Charging port in a high angle so I don't think anything went in the mac, also I saw most of it went on my sleeve. Just as a precaution, how will I know if it has water damage?

spraying the USB port with what ?
define "DUST REMOVER"
surely you DONT mean that spray stuff used on furniture, ...... do you?
One assumes you mean a can of compressed air.
You likely just flushed out some dust bunnies, I assume you mean a snow of dust.

X-Fi detected as Extreme Gamer -WHY ? + how to tell which firmware card has (vide nF4 proble

Hello.
The pictures say it all - new rev. of card, detected as Extreme Gamer. What is going on ?
http://photos.allegro.pl/photos/oryg...0723/2307235_3
http://img27.imageshack.us/img27/274/hhhch8.jpg
BTW : the explanation by Creative of the new revisions is most disturbing : the say that they refined the production process, and as result new chips generate more heat ... AND ... they are looking forward into REFINING IT MORE so that they can, here's the best part, reduce the heat emission to level that previous cards had.
I mean ,what the ... ? What kind of rifining is that ?
OK, all in al, I would like someone (hopefully from CREATIVE) to explain it to me - first of all the wierd Extreme Gamer thing, and "the new revisions" thing.
In addition I have another question - I am willing to buy X-Fi. Right now I own a nForce2 based mobo, and in near future (I can not tell how near, or how far) I am going to upgrade the whole PC. It could happen that I end up with nF4 board. The question is : is there any way to verify which firmare version the card has (because I am aware that in case of problems with nF4's, X-Fi cards were replaced with units with new firmware). How do I tell the difference between them ?
Message Edited by Suchy0 on 08-27-2006 03:2 AM

My X-Fi is a Dell OEM one.
I assume is a new revision because the disposition of the capacitors is different to the pictures I've seen of the early X-Fi retail ones, and it has a radiator on the chip.
It's being running flawlessly on my rig for about six weeks now.
This is a brief summary of the hardware installed on it:
DFI NF2 UltraInfinity with custom BIOS (homemade tweaks here and there, including new SATA Bios and some fiddling with memory timings/latency, nothing very serious).
Athlon XP3200+ 400 Mhz (Barton core... big troublemaker)
Thermaltake SilentTower Cooler
Gb DDR-SDRAM PC3200 (2x52) Infineon slightly overvolted/overclocked (2.80v / 2.5-3-3-7)
Antec TrueBlue 350w PSU (Slowly decaying... the 2v rail is going all over the place, shouting for a new one...)
Asus V9999 GeForce 6800 GT now running on stock clocking (or my PSU will just quit).
ViewSonic VX2025w
Hitachi Deskstar 7K250 60Gb 8Mb Cache SATA50 OEM HDD on SATA 0
SpinPoint P Series SP082C 80 Gb on SATA
Lite-On DVDRW SHM-65P6S on IDE 0
NEC DVDRW ND-3500AG on IDE
SB X-Fi ExtremeMusic (Dell OEM) in PCI #4 (IRQ 7, not shared)
TP-Link TL-WN650G Wireless Adapter in PCI #5 (IRQ 8, not shared)
Onboard SoundStorm enabled (I use it for ventrilo with a headset)
I run WindowsXP SP2 with all the latest patches/updates (Goddess bless AutoPatcher ^^).
APIC enabled on BIOS and running "ACPI Uniprocessor PC" HAL.
I also have far too much junk installed.For the MB I use the 5.0 drivers (all but the IDE driver)
For the SoundStorm the 4.62 release.
For the X-Fi I use the YouP-Pax 3.33 drivers. (drivers only, no bloatware TYVM)
For the 6800GT I use the XTreme-G 9.45 drivers.
For the WLAN card I use heavily hacked Atheros drivers (4..2.37 based).
Now, I'm not friend of FPS's, so the only game I've played that qualifies as such is Prey, dri'ven by curiosity more than anything else. The X-Fi behaved during gameplay. No popping/crackling/crashing/jumping/skipping or hopping.
I've extensi'vely played Oblivion (absolutely brilliant, worth every penny, pity my rig can barely cope with it), Dungeon Siege II: Broken World, Final Fantasy XI (can't get over this one... everytime I decide to quit I find myself playing again) and Syberia II (I love this kind of games... pity no one does them anymore...). Again no problems.
I also played a few movies (DVD, DivX, XviD...) with no issues whatsoever.
And my music (both compressed and uncompressed) sounds brilliant.
Not too bad for a $9 investment ^^Message Edited by MrToad on 08-28-2006 2:05 AM

How to tell if a client has backed up to Time Machine

I have multiple MACBook Pro and an iMAC at my home. All are configured to backup to the same Time Machine. One of the MacBook Pro had a problem with the installation of Lion and needs to restore from a Time Capsule backup. When prompted for the user and password for the system to access the time capsule disk, the information entered is not accepted.
Since I am the administrator, is there a way from my system to tell if the other system has been backed up to the Time Machine or when the last time it was backed up was since I can not seam to get into it from the system needing to be restored?

Time Machine normally only shows the backups for the Mac it's running on. To see a different Mac's backups, you need the Browse... option, per #E2 in Time Machine - Troubleshooting.

How to tell if the nano has a defective screen...

Ok, earlier today I had my iPod nano in my pocket with NOTHING EXCEPT THE IPOD NANO IN IT (not even headphones!). The iPod nano was in the iSee nano case and also had the decal girl crystal shield under it. I was wearing my favourite pants. They are very baggy and have huge pockets. Anyway, I was walking with the nano in my pocket for about 1 minute, and I didn't sit down. I pulled it out, and what do you know? The screen is cracked. A yucky blacky thing was in the bottom right hand corner. It looked like spilled ink (as another poster said a while ago). I turned the nano on, and the blacky thingy grew a bit and turned pixalized. The top of the screen just had a blue bar. The bottom of the screen showed a lighter blue bar. I could barely make out the menu items "Settings" and "Shuffle songs" through the bar. The total right hand side of the screen is either white of covered with the blob.
Here are some pictures. Note that the scratches are not on the nano, but they are actually on the iSee.
http://img157.imageshack.us/img157/8079/p11000013lp.jpg
http://img157.imageshack.us/img157/8648/p11000026kg.jpg
http://img310.imageshack.us/img310/1308/p11000032fa.jpg
http://img520.imageshack.us/img520/2609/p11000042qb.jpg
http://img520.imageshack.us/img520/4/p11000051px.jpg
http://img242.imageshack.us/img242/8672/p11000073db.jpg
http://img242.imageshack.us/img242/6785/p11000083da.jpg
I contacted apple and they said that they were going to send me a box within 2 days to my house. I put the nano in and then they will decide whether to fix it or not. What I want to know is how can I tell if I really do have a defective screen? I've heard that if your screen cracks from the inside, then it is defective. If you drop your nano/put your car keys next to it and it cracks, it is your fault.
I think I have a defective one. The case itself emerged unharmed, with no new scratches (I still have yet to figure out how so many scratches could collect on the iSee nano case in little over a week). There is no dent in the case, because I didn't actually hit anything. I think my nano must be defective. According to apple's website, my nano's approximate date of purchase was October 18.
The thin clear layer of whatever it is that covers the nano screen is not cracked. Some part of the nano is cracked though. I think it is defective. How else could it crack without harming the case or the thin invisible layer or whatever without me dropping it.
Judging from this, can you tell me if it is faulty, or if it isn't faulty?

That is so stupid. Any additional pressure......
I can't believe this. When I first got the nano, I thought my only problem would be scratching, so it's been paired with a case and a screen protector since I got it. I never thought cracking would be a problem.
And why did they have to make it so thin anyways? Screw the 1GB nano, make a nano around the .33 inches thickness of a shuffle. The nano will now not crack or scratch, and I will have nothing to complain about.
I know that during the first 14 days from the date of purchase, you can get a refund on your nano. If I do get a new nano back, will I be able to get a refund, or not? The original iPod (the cracked one next to my computer) was engraved with my name. On the online form I asked apple not to engrave it, to speed up the process. My warranty will not restart, but will my date of purchse? I really want to refund this nano and forget about it. Screw the screen protectors and cases. I'll give them to my cousin. Her nano is scratched like ****.

How to tell if column value has changed for use in workflow actions

Hello,
I am using Sharepoint 2010 and for one of my Lists, I am using a general list workflow. What I need to be able to do is determine if a column value has change (say an "Assigned To" field) because I only want to take some action if that particular
value has changed. I want to be able to have a workflow action that would be something like:
If Current Item: Assigned To not equals [OLD VALUE]
I have found some web searches that talk about creating a duplicate list or duplicate (but hidden) column but that doesn't seem to be the way to go. I have document versioning set but don't if that can be used to help with this. One possible
thought (although I haven't tried it to see if it works) is to create local variables and have the values in the variables be the "old value". Just not sure if there is a best practices for doing this.
Thanks for any thoughts - Peter

Helen,
Not sure I fully understand your goal. We don't use "tasks" at all but if you are looking to have your workflow check certain valus and be able to send email messages to people based on whatever, then you can certainly do that (as long as your Sharepoint
has the email setup. We do this for alot of workflow tasks.
So, in the workflow you can have a blanket statement like what I previously listed:
if Current Item:hiddenStatus not equals Current Item:Status
    .... do something
or you can do something like:
if Current Item:hiddenStatus equals "In-Progress"
    .... do something
Else if Current Item:hiddenStatus equals "Completed"
    .... do something
or combine the two and do nested "if" statements. Then you add an email statement wherever you need it like:
if Current Item:hiddenStatus equals "Completed"
   then email "these users"
To add the email part, just type in "email" on the line where you want to add a statment. There is only one option to choose from. That will display the line "then email these users".   The "these users" will be a link. When you
click it you will get a popup to add the email info. We typically will send the email to a user (or users) that are already listed in one of the PeoplePicker fields. On the email form, you can type in your own text, designate that a value is based
on a column value (like our PeoplePicker), designate that a value is based on a workflow variable, add a link to the current item, etc. To get to these options you will click the button to the right of the fields or use the "Add or Change Lookup" button
in the bottom-left for the text area. There is alot you can set in the mail.
Does this help answer your question?
- Peter

How to tell if my netbook has gigabit Ethernet (and/or can use it)

I have owned an Asus Eee 701SD (the 8GB version) since 2009, and installed Arch on it last summer (a great move :-) ).
The other day, I came across a page on the FreeBSD wiki, which suggested that certain 700-series Eee's have a gigabit Ethernet interface (rather than the usual 10/100). Through checking 'hardinfo' and 'sudo lshw -c network', it appears that my machine might have a gigabit interface, but I'm not sure. This is the output from lshw:
*-network
description: Ethernet interface
product: AR8121/AR8113/AR8114 Gigabit or Fast Ethernet
vendor: Atheros Communications
physical id: 0
bus info: pci@0000:03:00.0
logical name: eth0
version: b0
serial: 00:24:8c:3f:3a:ba
capacity: 100Mbit/s
width: 64 bits
clock: 33MHz
capabilities: pm msi pciexpress vpd bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd autonegotiation
configuration: autonegotiation=on broadcast=yes driver=ATL1E driverversion=1.0.0.7-NAPI firmware=L1e latency=0 link=no multicast=yes port=twisted pair
resources: irq:44 memory:fbfc0000-fbffffff ioport:ec00(size=128)
This is a bit confusing - the "capacity" heading above indicates the Ethernet is 10/100, but the Atheros Ethernet interface is given as "AR8121/AR8113/AR8114 Gigabit or Fast Ethernet" (confirmed by 'lspci'), which I guess means it can act as either gigabit or 10/100.
Assuming that all this means I do have a gigabit Ethernet port on my netbook: will the Arch system make automatic use of the extra speed, or do I need to issue any commands, change any settings, recompile the kernel, etc.?
Many thanks :-)
Tim

If it were a Gigabit NIC, it would simply be "AR8121/AR8113/AR8114 Gigabit"
Seriously, if the driver is working properly, 100Mbit/s is what you have got. You can check again with
ethtool eth0
which lists the supported device speeds.
Last edited by lolilolicon (2012-01-12 11:21:30)

How to tell if Yosemite is clean install or upgrade from previous version

My brand new MacBook Pro arrived last week, with Yosemite already installed on it.
Having issues with WiFi (after coming out of sleep mode, mbp keeps its self-assigned address rather than getting an address though DHCP or using its old address), I was searching for support on the matter, and one of the solutions often suggested was doing a clean install of Yosemite if the mbp was upgraded from 10.9.
Seeing that the mbp arrived with Yosemite pre-installed, I'm guessing that it is a clean install, but I'm not sure.
I wonder if there is a way in telling if the OS was upgraded to the current major version, or if it's a clean install? Even if Apple only ships clean installs, it would be helpful to know if I need to give support to one of the mac-users in our company if it's a clean install or not.

On my system, the Yosemite upgrade (performed on Oct. 23) left quite a bit of residue that would not be present after a clean install. The most obvious examples are in /var/db/receipts, which contains BOM files for all of the software installed via the Mac OS installer, e.g.,
-rw-r--r-- 1 root wheel     98584 Oct 20 08:49 com.apple.pkg.update.lion.appstore.155-2.bom
-rw-r--r-- 1 root wheel       563 Oct 20 08:49 com.apple.pkg.update.lion.appstore.155-2.plist
-rw-r--r-- 1 root wheel     81657 Sep 29 17:13 com.apple.pkg.update.os.bash.lion.1.0.163-3.bom
-rw-r--r-- 1 root wheel       279 Sep 29 17:13 com.apple.pkg.update.os.bash.lion.1.0.163-3.plist
-rw-r--r-- 1 root wheel     80653 Aug 12 13:34 com.apple.pkg.EPSON_USBPrintClassSL.bom
-rw-r--r-- 1 root wheel       472 Aug 12 13:34 com.apple.pkg.EPSON_USBPrintClassSL.plist

How to tell if call/complaint has actually been re...

I had a number of problems in setting up my BT phone line. To cut a long story short, I ordered a phoneline online last July 09. It turned out BT had decided I needed a new line put in, however I was not informed of this as BT decided to change my 12 month contract to an 18 month contract, without informing me until it was too late to cancel. I was only living in the flat for 12 months anyway, so this was no use to me.
(a week or two after I recieved a letter to the previous occupant from BT, they had infact had a phone line with BT so I don't believe a new phoneline ever had to be put in)
I spent a lot of time on the phone to BT in the next few weeks. The people answering my calls could be separated into roughly two categories: the openly useless (I'm sorry, there is nothing I can do) and those who sounded helpful but did not actually do anything ("someone will call you back tomorrow" - no call! or "I'll refer you to the investigations team" - nothing), when I called back to follow up the empty promises there generally wasn't any record of my making the previous call at all!.
When I recieved my first bill, for the month BEFORE my contract even started (including charges for not having made a certain number of calls!) I once again picked up the phone and called BT, this time threatening to contact an ombusman. The man on the phone refunded me this in the next bill and also said that I would be able to cancel my contact without extra change in August 2010. He said he would put a note on my account, not ideal but I was satisfied.
I have now reached the end of my tenancy and wish to cancel my account with BT. 9 days ago I sent an email using the service on this website outling my wish to end the contract. While I recieved a conformation of the email being sent, I did not recieve a reply and today phoned up the call centre. I spoke to a nice person on the phone who was unable to find a record of either my email or the note on my account allowing me to avoid some of the "early" cancellation fees. She says she had reffered me onto the complaints department and they will contact me in 5-7 working days.
I want to believe her. But in my experiance, the staff who have actually said they would do something never have and these calls don't get recorded and notes aren't put onto my account. I think there must be some sort of glitch in my account meaning a lot of my calls just aren't registered as having happened. Its upsetting as sometimes I don't feel as though I'm being believed and I have to explain the whole thing everytime I phone. Today I forgot to ask for her name or a referance number, not that I've ever managed to get some sort of referance number before (surely that sort of system wouldnt be hard to impliment!) and I'm kicking myself.
I'm going on holiday in a week, and will be away for just over 2 weeks so I'm worried about the next tenants in the house. Their tenancy starts tomorrow and I'm not sure what they'll want to do about the phone.
I just want some assurance that my complaint is actually being dealt with and hasn't been lost in the system once again.

Hi Kai,
Thanks for posting. I'm sorry you're having such a difficult time in getting your line cancelled. I can certainly look into this for you. Drop me an email to [email protected] with the account details and a link to this post for reference and we'll take it from there.
Cheers
David
BTCare Community Mod
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry but we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)

How to tell if cc 2014 has installed properly

Similar Messages

Maybe you are looking for