How to tell if nic card is working at 100mb or 10mb??

hello,
subject line says it all.
also, what would be best way to migrate to the open workgroup suite from
sbs6.5??
I'm running everything on one server. would like to add the blackberry
server to the new system. need to run citrix as well (only runs on
windows term server), this would be a seperate box.
would be using win2k3 server for citrix/term server on one box and
another box for running win2k3 with mssql 2005.
Thanks,
Oskar

Anders Gustafsson wrote:
> News novell,
>> subject line says it all.
>>
> Monitor, LAN/WAN, Look at the NIC stats. Almost all NIC drivers will
> report true speed/duplex there
>
> - Anders Gustafsson (Sysop)
> The Aaland Islands (N60 E20)
>
> Discover the new Novell forums at http://forums.novell.com
>
> Novell does not monitor these forums officially.
> Enhancement requests for all Novell products may be made at
> http://support.novell.com/enhancement
>
I'm getting max of 104KB per second.
This is pretty slow, isn't it? I think the NIC card on this server is
due for an upgrade. I'm looking at the intel pro server nics.
Any other suggestions? I'm looking for a nic card that is on the HCL
for netware 6.5
Thanks,
Oskar

Similar Messages

How to get micro sd card to work

how to get micro sd card to work.. my phone says total space 7.40GB for sSD card and that's whats available. I put a micro SD card in but no change?

You put the card in and go to settings and go to storage and scroll down to sd card and click mount ad card

[p7-1240] How can I tell which graphics cards will work with my motherboard?

I recently went through the nightmare of trying to install a Gigabyte GTX 650 in my PC. After a few days of struggling and scouring the internet for answers, I discovered that it is incompatible with the BIOS on my motherboard, and HP does not offer BIOS updates. I returned the card and am now looking for a new one, but I am unsure of which cards will work now, since my computer met all of the system requirements for the graphics card, and It stil ldid not work. Since GPU manufacturers do not list BIOS specs under system requirements, how can I tell if a graphics card will work with my sytem?
My computer is a p7-1240 with an upgraded 520W PSU and approximeately 11" of room to install the card.
This question was solved.
View Solution.

Thexn, welcome to the forum.
The problem is, many of the newer video cards require the computer to have a full UEFI BIOS. HP began using one in mid-October, 2012. Before this date the BIOS is Legacy. This is why the video card didn't work with your computer.
I don't know what you want to spend for a card, but MSI makes a GTX 750ti that has a hybrid VBIOS. It has a switch to change to Legacy or UEFI. There is a video link directly below the picture of a card. Paul from Newegg gives a full description of the card.
I like EVGA cards the best. Their Tech Support has given me a lot of information about their cards. However, you have to go back to a GT 640 card to find one of their cards that doesn't require the UEFI BIOS. They do have some updates for their BIOS'es that solve the problem, but you have to call them for the exact cards.
Please click the "Thumbs up + button" if I have helped you and click "Accept as Solution" if your problem is solved.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

HT201209 How do i get my card to work if when i've scratched it off, all the numbers have come off also??

How do i get my iTunes card to work if when i've tried to scratched it off, the code has come off all together??

With any luck, the following document may be of some assistance with that:
iTunes Store: Invalid, inactive, or illegible codes

How to tell if video card works at 8x speed on MS-6570 K7N2-ILSR?

my mobo is MS-6570 K7N2-ILSR with the latest bios update and my video card is ATI READON 9600 236mb 8x agp and windows xp pro sp2.
when installing ATI Catalist v5.9 (the latest), it configures the card at agp speed: OFF.
in the bios, all i have for agp speed is: AGP 8x - enable/disable.
my friend have gigabyte mobo with the same video card and ati catalist configured his video in windows xp pro sp2 at 8x speed.
why ?
is there any configuration i should check in the bios and/or in windows ?

Quote from: Wonkanoby on 07-October-05, 18:22:19
you have to install the gart driver in the nforce drivers packagenVidia Drivers
and best its done before the ati drivers
gart driver ?

How to tell whether video preview is working?

An app shows video preview with code essentially the same as in
the MSDN document:
async void ShowPreview(object sender, RoutedEventArgs e)
if (mediaCaptureMgr == null)
// Using Windows.Media.Capture.MediaCapture APIs
// to stream from webcam
mediaCaptureMgr = new MediaCapture();
await mediaCaptureMgr.InitializeAsync();
myCaptureElement.Source = mediaCaptureMgr;
await mediaCaptureMgr.StartPreviewAsync();
It works most of the time. However, sometimes the video does not show. When this happens, myCaptureElement.ActualWidth and myCaptureElement.ActualHeight still return the correct values. This probably means at least something is working. In this case, how can
the code tell what my eyes can see - the video is not showing?
Hong

Hi Hong,
Based on my knowledge, your problem may related to the dispose of the MediaCapture object. Forget to dispose it when app suspends will result in a negative user experience for your app.
About your question, I’ve not seen such property in MediaCapture class, so it’s recommend to create a Boolean that indicate whether the app is currently previewing video. You need to maintain this object when start or stop preview. You can find more information
from this page.
https://msdn.microsoft.com/en-us/library/windows/apps/xaml/hh868171.aspx. See Step 5 section.
Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place. Click HERE to participate
the survey.

Sun Ray - How to get external USB Card Reader working

Dear All,
i have the following problem. Maybe someone could help me or give me a clue to solve it.
SunRay Software 5 installed
Window 2003 R2 TerminalServer
Here my question:
I use a kiosk session with a smart card to conncet to the windows server - works perfect.
Login Screen and go.
Now i have to have to authenticate myself with an external usb card reader and smart
card (connected to the sun ray) to use a certain application on my win2003 server.
Via the windows rdp session (from the laptops) everthing is ok. The information from
the card reader is transferred to the server.
If i use the Sun Ray nothing happens. So here is my problem:
How do get the authentication information from the smart card to the server?
Thanks in advance
Best regards
Hans-Peter

Basically, reinstall the Boot Camp video drivers manually and if that doesn't work then go to the AMD/Radeon website and install the Windows drivers directly for your video card model.
If you want to do a search you will find others that have pretty good luck doing it either way.

How to tell if my wifi is working and my phones not using data when Im connected to wifi

My data is sky high and I have a feeling my wifi isn't worKing... How do I tell if when I'm connected to wifi that it isn't sucking up all my data ?

If the wi-fi symbol is showing at the top of the screen, then you are using wi-fi.
Some things, like visual voicemail, use cellular data not wifi

X-Fi detected as Extreme Gamer -WHY ? + how to tell which firmware card has (vide nF4 proble

Hello.
The pictures say it all - new rev. of card, detected as Extreme Gamer. What is going on ?
http://photos.allegro.pl/photos/oryg...0723/2307235_3
http://img27.imageshack.us/img27/274/hhhch8.jpg
BTW : the explanation by Creative of the new revisions is most disturbing : the say that they refined the production process, and as result new chips generate more heat ... AND ... they are looking forward into REFINING IT MORE so that they can, here's the best part, reduce the heat emission to level that previous cards had.
I mean ,what the ... ? What kind of rifining is that ?
OK, all in al, I would like someone (hopefully from CREATIVE) to explain it to me - first of all the wierd Extreme Gamer thing, and "the new revisions" thing.
In addition I have another question - I am willing to buy X-Fi. Right now I own a nForce2 based mobo, and in near future (I can not tell how near, or how far) I am going to upgrade the whole PC. It could happen that I end up with nF4 board. The question is : is there any way to verify which firmare version the card has (because I am aware that in case of problems with nF4's, X-Fi cards were replaced with units with new firmware). How do I tell the difference between them ?
Message Edited by Suchy0 on 08-27-2006 03:2 AM

My X-Fi is a Dell OEM one.
I assume is a new revision because the disposition of the capacitors is different to the pictures I've seen of the early X-Fi retail ones, and it has a radiator on the chip.
It's being running flawlessly on my rig for about six weeks now.
This is a brief summary of the hardware installed on it:
DFI NF2 UltraInfinity with custom BIOS (homemade tweaks here and there, including new SATA Bios and some fiddling with memory timings/latency, nothing very serious).
Athlon XP3200+ 400 Mhz (Barton core... big troublemaker)
Thermaltake SilentTower Cooler
Gb DDR-SDRAM PC3200 (2x52) Infineon slightly overvolted/overclocked (2.80v / 2.5-3-3-7)
Antec TrueBlue 350w PSU (Slowly decaying... the 2v rail is going all over the place, shouting for a new one...)
Asus V9999 GeForce 6800 GT now running on stock clocking (or my PSU will just quit).
ViewSonic VX2025w
Hitachi Deskstar 7K250 60Gb 8Mb Cache SATA50 OEM HDD on SATA 0
SpinPoint P Series SP082C 80 Gb on SATA
Lite-On DVDRW SHM-65P6S on IDE 0
NEC DVDRW ND-3500AG on IDE
SB X-Fi ExtremeMusic (Dell OEM) in PCI #4 (IRQ 7, not shared)
TP-Link TL-WN650G Wireless Adapter in PCI #5 (IRQ 8, not shared)
Onboard SoundStorm enabled (I use it for ventrilo with a headset)
I run WindowsXP SP2 with all the latest patches/updates (Goddess bless AutoPatcher ^^).
APIC enabled on BIOS and running "ACPI Uniprocessor PC" HAL.
I also have far too much junk installed.For the MB I use the 5.0 drivers (all but the IDE driver)
For the SoundStorm the 4.62 release.
For the X-Fi I use the YouP-Pax 3.33 drivers. (drivers only, no bloatware TYVM)
For the 6800GT I use the XTreme-G 9.45 drivers.
For the WLAN card I use heavily hacked Atheros drivers (4..2.37 based).
Now, I'm not friend of FPS's, so the only game I've played that qualifies as such is Prey, dri'ven by curiosity more than anything else. The X-Fi behaved during gameplay. No popping/crackling/crashing/jumping/skipping or hopping.
I've extensi'vely played Oblivion (absolutely brilliant, worth every penny, pity my rig can barely cope with it), Dungeon Siege II: Broken World, Final Fantasy XI (can't get over this one... everytime I decide to quit I find myself playing again) and Syberia II (I love this kind of games... pity no one does them anymore...). Again no problems.
I also played a few movies (DVD, DivX, XviD...) with no issues whatsoever.
And my music (both compressed and uncompressed) sounds brilliant.
Not too bad for a $9 investment ^^Message Edited by MrToad on 08-28-2006 2:05 AM

How to get dual graphics card to work together?

I have an L series satellite with dual graphics card that wont work together. Its an AMD Radeon 3400m apu with an HD 6520G integrated , and a 6400m discrete graphcs card.
The 6400m will never turn on, I have used amd system monitor to see if it is ever used, but it never is.
Even when the 6520g is at full load it wont turn on.
Any suggestions would be helpful.
Thanks.

Hi
As far as I know this theme has been already discussed here in the forum and the switch between internal and external ATI GPU is not supported.
Just the Optimus technology designed by nVidia is supported
So you can switch between Intel GPU and nVidia (if both would support the Optimus technology)

EntaOk, I am atuallually having troubles with my itunes music card. I accidlly scratched a letter off. i want to get my card to work. how? thank you.

Ok, I am actually having troubles with my itunes music card. I accidentally scratched off a letter. how can i get my card to work without the actual code? thank you.

Yu can try contacting iTunes. See the iTunes Cards abd Code topic of:
Apple - Support - iTunes

How to set up set which NIC card to use for multicast?..

 I just downloaded Rolling Patch 1 for WLS6.0SP2.
 While reading the README file it says
 " ISSUE 42518: Provided a way to set which NIC card to use for multicast traffic
 Can anyone tell me how to set this?. on my WebApplication server it has two NIC
 cards and I want to use the NICcard which is being used to talk to internal network
 for multicast messages.
 One more thing,
 Can anyone one tell how to search for bugs (ISSUES) in weblogic. I am looking
 place where I enter ISSUE number and should get the detailed description of bug/issue
 etc..
 Thanks for helping,
 Nilesh


 Thanks Kumar, I'll try this.
 Does this -Dweblogic.interfaceAddress used only for multicast. Or this is also
 used to talk to AdminServer?.
 The other problem I am facing is when I restart the AdminServer in recovery mode
 it's not finding my WebApp servers, because my webapp servers are on public network
 and my admin (management) server is on private network.
 please look at http://newsgroups.bea.com/cgi-bin/dnewsweb?cmd=article&group=weblogic.developer.interest.management&item=1217&utag=
 , for more details about my problem.
 Thanks,
 Nilesh
 Kumar Allamraju <[email protected]> wrote:
 ><!doctype html public "-//w3c//dtd html 4.0 transitional//en">
 ><html>
 >You should be able to do it via console in 6.1
 > Not sure if it was added in 6.0
 >For 6.0 you can set this via command line
 > java -Dweblogic.interfaceAddress=<addr>
 >You need 6.0 SP2 RP1
 >--
 > Kumar
 >Nilesh Shah wrote:
 ><blockquote TYPE=CITE>I just downloaded Rolling Patch 1 for WLS6.0SP2.
 > While reading the README file it says
 > " ISSUE 42518: Provided a way to set which NIC card to use for multicast
 >traffic
 > "..
 >Can anyone tell me how to set this?. on my WebApplication server it
 >has two NIC
 > cards and I want to use the NICcard which is being used to talk to
 >internal network
 > for multicast messages.
 >One more thing,
 >Can anyone one tell how to search for bugs (ISSUES) in weblogic. I
 >am
 >looking
 > place where I enter ISSUE number and should get the detailed description
 >of bug/issue
 > etc..
 >Thanks for helping,
 >Nilesh</blockquote>
 ></html>
 >

How to add a second nic card to non global zone

hi every one
i have a issue like
my non global zone has hme0 as the nic card
i want to add a secondary nic card like pcn0 to the non global zone . how can i add to the nonglobal zone so that both the nic cards should exist in the nonglobal zone
please tell me the command and procedure for that
thanks in advance ....

If your non-global zone is a shared IP zone, then you can add like
zonecfg -z <zonename>
add net
set physical=pnc0
set address=<IP Address>
end
verify
commit
exit
If your non-global zone is an exclusive IP zone, then remember that the interface pnc0 you are adding will be in control of non-global zone exclusively.
Steps to add it are same as above.

My macbook pro no longer connects to my TV with the mini dvi to hdmi adapter. A while ago the computer fell down and hit the cable. How can I tell if the computer is working ok. Doesn't show mirroring any more.

My macbook pro no longer connects to my TV with the mini dvi to hdmi adapter. A while ago the computer fell down and hit the cable. How can I tell if the computer is working ok. Doesn't show mirroring any more. Was working while watching a movie but when I pulled it out from the computer and put it back in the system would no longer mirrorr the screen on the TV.

The best option is an appointment at an Apple store genius bar. The evaluation will be for FREE!
Ciao.

Can someone tell me how to disconnect my credit card from my iTunes account?

Can someone tell me how to disconnect my credit card from my iTunes account?

For information on how to do this, check out this article:
http://support.apple.com/kb/ht1918
If the option to select "None" from the list of payment types doesn't appear, then there is a billing is with your last purchase which needs to be resolved first.

How to tell if nic card is working at 100mb or 10mb??

Similar Messages

Maybe you are looking for