How to tell iPhoto book " this is the last page "

I have created a 16 page book. When I go to print in PDF the book appears 21 pages long. How do I end the book at 16 pages ?

Your book must be a minimum of 20 pages. There is no way around this.

Similar Messages

How to get safari to open to the last page I was on and screens to enlarge automatically?

Hello, I just upgraded to the latest iMac version from my 2010 model, and whenever I close and open up safari it opens to top siotes instead of the last page I was on, and every time I open it I have to enlarge it myself by clicking the arrows in the top right. Same happens with everything else, like the app store. How do I change this so whenever I go to safari it opens to the last page I was on and has safari, app store, etc. have large screens right away? I set up my old iMac 3 years ago, and I guess I must've done something to have it do this, but I forgetn what I did. Thank you in advance

Hello there, Clumn.
The following Knowledge Base article provides some general tips for Mavericks that may address your issue:
OS X Mavericks: General preferences
http://support.apple.com/kb/ph13803
Particularly of note:
Close windows when quitting an application
If you quit apps with windows still open on your screen, selecting this checkbox prevents the windows from reopening automatically the next time you start their app.
This feature when not selected will allow the application to reopen windows automatically when you open the app.
Additionally, this article provides information on how to set windows Full Screen:
OS X Mavericks: Take apps full screen
http://support.apple.com/kb/PH14302
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

How to display amount in words in the last page

Hi,
I am very new to Oracle Report, but v.good experience in Crystal report.
How can i display amount in words for an invoice amount total in the last page of the invoice and after total amount. I created a new non repeating frame and put the amount in words inside that, and set the frames diplay property Print on Last Page, but the problem is already there is a repeating frame to print all the invoices item, and the total in figure. But the amount in words frame is not always coming after the total amount,either it should be at the bottom of the last page in fixed position, otherwise it should move just below the total amount.
I am using Oracle 11g.
Thanks in advance...
Fsl

Hi ,
Use This function
create or replace FUNCTION xxg4_zen_conv_words (p_amount IN Number) RETURN Varchar2 IS
--Creation Date   : 11-DEC-2009
--Purpose         : This Function returns amount in words.
--Parameters      :
--1) p_amount : Only positive and negative values are allowed.
Precision can be entered upto 10 digits and only 2 scales
are allowed e.g 9999999999.99
-- Index by Tables to store word list
TYPE typ_word_list IS TABLE OF Varchar2(200) INDEX BY BINARY_INTEGER;
t_typ_word_list typ_word_list;
TYPE typ_word_gap IS TABLE OF Varchar2(200) INDEX BY BINARY_INTEGER;
t_typ_word_gap typ_word_gap;
-- Local Variables
v_amount Number := p_amount;
v_amount_length Number;
v_words Varchar2(10000);
v_point_found Varchar2(1) := 'N';
v_point_value Number;
BEGIN
/*Getting value after point if found */
v_point_value := SUBSTR(v_amount,(INSTR(v_amount,'.',1) + 1),2);
/*Checking whether amount has any scale value also */
v_point_found := CASE WHEN (INSTR(v_amount,'.',1)) = 0 THEN 'N'
WHEN (INSTR(v_amount,'.',1)) > 0 THEN 'Y'
END;
/*Converting amount into pure numeric format */
v_amount := FLOOR(ABS(v_amount));
v_amount_length := LENGTH(v_amount);
t_typ_word_gap(2) := 'and Paise';
t_typ_word_gap(3) := 'Hundred';
t_typ_word_gap(4) := 'Thousand';
t_typ_word_gap(6) := 'Lakh';
t_typ_word_gap(8) := 'Crore';
t_typ_word_gap(10) := 'Arab';
FOR i IN 1..99
LOOP
t_typ_word_list(i) := To_Char(To_Date(i,'J'),'Jsp');
END LOOP;
IF v_amount_length <= 2
THEN
/* Conversion 1 to 99 digits */
v_words := t_typ_word_list(v_amount);
ELSIF v_amount_length = 3
THEN
/* Conversion for 3 digits till 999 */
v_words := t_typ_word_list(SUBSTR(v_amount,1,1))||' '||t_typ_word_gap(3);
v_words := v_words ||' '||t_typ_word_list(SUBSTR(v_amount,2,2));
ELSIF v_amount_length = 4
THEN
/* Conversion for 4 digits till 9999 */
v_words := t_typ_word_list(SUBSTR(v_amount,1,1))||' '||t_typ_word_gap(4);
IF SUBSTR(v_amount,2,1) != 0
THEN
v_words := v_words ||' '||t_typ_word_list(SUBSTR(v_amount,2,1))||' '||t_typ_word_gap(3);
END IF;
IF SUBSTR(v_amount,3,2) != 0
THEN
v_words := v_words ||' '||t_typ_word_list(SUBSTR(v_amount,3,2));
END IF;
ELSIF v_amount_length = 5
THEN
/* Conversion for 5 digits till 99999 */
v_words := t_typ_word_list(SUBSTR(v_amount,1,2))||' '||t_typ_word_gap(4);
IF SUBSTR(v_amount,3,1) != 0
THEN
v_words := v_words ||' '||t_typ_word_list(SUBSTR(v_amount,3,1))||' '||t_typ_word_gap(3);
END IF;
IF SUBSTR(v_amount,4,2) != 0
THEN
v_words := v_words ||' '||t_typ_word_list(SUBSTR(v_amount,4,2));
END IF;
ELSIF v_amount_length = 6
THEN
/* Conversion for 6 digits till 999999 */
v_words := t_typ_word_list(SUBSTR(v_amount,1,1))||' '||t_typ_word_gap(6);
IF SUBSTR(v_amount,2,2) != 0
THEN
v_words := v_words ||' '||t_typ_word_list(SUBSTR(v_amount,2,2))||' '||t_typ_word_gap(4);
END IF;
IF SUBSTR(v_amount,4,1) != 0
THEN
v_words := v_words ||' '||t_typ_word_list(SUBSTR(v_amount,4,1))||' '||t_typ_word_gap(3);
END IF;
IF SUBSTR(v_amount,5,2) != 0
THEN
v_words := v_words ||' '||t_typ_word_list(SUBSTR(v_amount,5,2));
END IF;
ELSIF v_amount_length = 7
THEN
/* Conversion for 7 digits till 9999999 */
v_words := t_typ_word_list(SUBSTR(v_amount,1,2))||' '||t_typ_word_gap(6);
IF SUBSTR(v_amount,3,2) != 0
THEN
v_words := v_words ||' '||t_typ_word_list(SUBSTR(v_amount,3,2))||' '||t_typ_word_gap(4);
END IF;
IF SUBSTR(v_amount,5,1) != 0
THEN
v_words := v_words ||' '||t_typ_word_list(SUBSTR(v_amount,5,1))||' '||t_typ_word_gap(3);
END IF;
IF SUBSTR(v_amount,6,2) != 0
THEN
v_words := v_words ||' '||t_typ_word_list(SUBSTR(v_amount,6,2));
END IF;
ELSIF v_amount_length = 8
THEN
/* Conversion for 8 digits till 99999999 */
v_words := t_typ_word_list(SUBSTR(v_amount,1,1))||' '||t_typ_word_gap(8);
IF SUBSTR(v_amount,2,2) != 0
THEN
v_words := v_words ||' '||t_typ_word_list(SUBSTR(v_amount,2,2))||' '||t_typ_word_gap(6);
END IF;
IF SUBSTR(v_amount,4,2) != 0
THEN
v_words := v_words ||' '||t_typ_word_list(SUBSTR(v_amount,4,2))||' '||t_typ_word_gap(4);
END IF;
IF SUBSTR(v_amount,6,1) != 0
THEN
v_words := v_words ||' '||t_typ_word_list(SUBSTR(v_amount,6,1))||' '||t_typ_word_gap(3);
END IF;
IF SUBSTR(v_amount,7,2) != 0
THEN
v_words := v_words ||' '||t_typ_word_list(SUBSTR(v_amount,7,2));
END IF;
ELSIF v_amount_length = 9
THEN
/* Conversion for 9 digits till 999999999 */
v_words := t_typ_word_list(SUBSTR(v_amount,1,2))||' '||t_typ_word_gap(8);
IF SUBSTR(v_amount,3,2) != 0
THEN
v_words := v_words ||' '||t_typ_word_list(SUBSTR(v_amount,3,2))||' '||t_typ_word_gap(6);
END IF;
IF SUBSTR(v_amount,5,2) != 0
THEN
v_words := v_words ||' '||t_typ_word_list(SUBSTR(v_amount,5,2))||' '||t_typ_word_gap(4);
END IF;
IF SUBSTR(v_amount,7,1) != 0
THEN
v_words := v_words ||' '||t_typ_word_list(SUBSTR(v_amount,7,1))||' '||t_typ_word_gap(3);
END IF;
IF SUBSTR(v_amount,8,2) != 0
THEN
v_words := v_words ||' '||t_typ_word_list(SUBSTR(v_amount,8,2));
END IF;
ELSIF v_amount_length = 10
THEN
/* Conversion for 10 digits till 9999999999 */
v_words := t_typ_word_list(SUBSTR(v_amount,1,1))||' '||t_typ_word_gap(10);
IF SUBSTR(v_amount,2,2) != 0
THEN
v_words := v_words ||' '||t_typ_word_list(SUBSTR(v_amount,2,2))||' '||t_typ_word_gap(8);
END IF;
IF SUBSTR(v_amount,4,2) != 0
THEN
v_words := v_words ||' '||t_typ_word_list(SUBSTR(v_amount,4,2))||' '||t_typ_word_gap(6);
END IF;
IF SUBSTR(v_amount,6,2) != 0
THEN
v_words := v_words ||' '||t_typ_word_list(SUBSTR(v_amount,6,2))||' '||t_typ_word_gap(4);
END IF;
IF SUBSTR(v_amount,8,1) != 0
THEN
v_words := v_words ||' '||t_typ_word_list(SUBSTR(v_amount,8,1))||' '||t_typ_word_gap(3);
END IF;
IF SUBSTR(v_amount,9,2) != 0
THEN
v_words := v_words ||' '||t_typ_word_list(SUBSTR(v_amount,9,2));
END IF;
END IF;
IF v_point_found = 'Y'
THEN
IF v_point_value != 0
THEN
v_words := v_words||' '||t_typ_word_gap(2)||' '||t_typ_word_list(CASE WHEN LENGTH(SUBSTR(p_amount,(INSTR(p_amount,'.',1) + 1),2)) = 1 THEN SUBSTR(p_amount,(INSTR(p_amount,'.',1) + 1),2)||'0'
WHEN LENGTH(SUBSTR(p_amount,(INSTR(p_amount,'.',1) + 1),2)) = 2 THEN SUBSTR(p_amount,(INSTR(p_amount,'.',1) + 1),2)
END);
END IF;
END IF;
IF p_amount < 0
THEN
v_words := 'Minus '||v_words;
ELSIF p_amount = 0
THEN
v_words := 'Zero';
END IF;
IF LENGTH(v_amount) > 10
THEN
v_words := 'Value larger than specified precision allowed to convert into words. Maximum 10 digits allowed for precision.';
END IF;
RETURN (v_words);
END xxg4_Zen_Conv_Words;
--Thanks
SAGAR SANKPAL

How can I print a label on the last page of the report in the margin

I would like to display a label on my report but has to appear only on the last page of the report in the margin area or as a footer. I have tried using the solution below that I came across in this forum. This solution only worked if I put the label as a report trailer and not in the margin of the main section of report. The problem of putting the label as a report trailer is that it will only appear at the end of the report on it's own page, i.e. on a new page. I would like the label to appear at the end of the report, on the last page which has the other report details and not to appear on a new page on its own. Could you please help? Thanks.
1. Create a dummy query, like
select 1 dummy
from dual
2. Create a package spec:
PACKAGE pkg_globals IS
totalPages number(3);
END;
2. Create a repeating frame and field for this dummy at the end of the report layout.
3. Create a format trigger for this frame:
function R_1FormatTrigger return boolean is
begin
SRW.GET_PAGE_NUM(pkg_globals.totalPages);
return (FALSE);
end;
4. Create a format trigger for your margin field:
function F_1FormatTrigger return boolean is
pagenum number;
begin
srw.get_page_num(pagenum);
if pagenum = pkg_globals.totalPages then
return (TRUE);
else
return (false);
end if;
end;

user8655468 wrote:
I would like to display a label on my report but has to appear only on the last page of the report in the margin areaCreate a fixed frame at the bottom of margin area and inside the frame put your label.
set the frame print object on: Last page
Hope this works..

How do I place a SubReport on the last page of a report?

Post Author: KPichelman
CA Forum: Crystal Reports
I am using CR 9.0 and C# to create a report. Now I need to place a subreport (a signature box) on the last page of the report and I seem to be having difficulties. I will not know the number of pages until runtime which I seem to be able to get using:
int rptLastPageNum;ReportPageRequestContext req = new ReportPageRequestContext();rptLastPageNum = oReport.FormatEngine.GetLastPageNumber(req);
Now, how do I place a subreport in the lower right corner of page "rptLastPageNum"? Is it possible to do it in the report itself or is there a way to do it in my C# code? One solution would be to put it in the footer of the report but unfortunately that doesn't work for us as there is another subreport to the left that will need to be shown next to our subreport, not above it.Thanks!!

Post Author: heathdallison
CA Forum: Crystal Reports
have you tried making a section in your report footer to hold your subreport and then using the section expert to make that supress using something like:{current page number} < {total page number}

How to display grand total only on the last page of my report

Hello
I need to display the grand total amount of the invoice only on the last page of every report. If the report has 1 page then the grand total will be displayed on the 1st page. If the report has 2 pages then a subtotal will be displayed on the 1st page adding up all the amounts on page 1 only, and the grand total will be displayed on the 2nd page, adding up all the amounts of page 1 and 2. If the report has 3 pages then the a subtotal will be displayed on page 1 adding up all the amounts of page 1, and another subtotal on page 2 adding up all the amounts of page 2, and the grand total are displayed on page 3 adding up the amounts of every page.
supplier amount
xx 100
yy 100
subtotal 200
page 1 of 2 --here i need to display only the total amounts of page 1
supplier amount
subtotal brought forward 200 --then i need to bring total of page 1 over to page 2
qq 300
zz 300
total 800 --here i have reached the end of the report and
need to display the grand total
page 2 of 2
--Currently i am displaying this on my report
supplier amount
xx 100
yy 100
total 800 --this one gives the problem cause it displays the grand total
---------- on page 1 of 2 even before you can see the amounts on the
next pages
page 1 of 2
supplier amount
qq 300
zz 300
total 800

put the grand total in a frame and set it to print on the last page of the enclosing object.

How to display a field only in the last page

hi all
i am using reports 6i
i ve created summary column and i need to get it displayed only on the last page of the report
is it possible
kindly guide
thanking in advance

Dear Friend,
where you created the summary coloumn? If your summary column in at top level you can do this just placing summary field bottom all repeating frame (all frames).
Regards
Ahamed Rafeeque Cherkala

Secondary window to be printed on the last page the form

Hello,
Is there any way, by which we can show the defined secondary window on the last page of the form in smartform?
Only 1 page is defined in the smartform for the layout.
e.g. If no. of line items exceeds more than the size defined for it in the main window, then a new page is taken to print rest of the line items. then total (defined in the secondary window) of the line items must be displayed on the the last page of the form only in this case the last page is 2nd.
Thanks and Regards,
Paresh

>
paresh rane wrote:
> e.g. If no. of line items exceeds more than the size defined for it in the main window, then a new page is taken to print rest of the line items.
> Paresh
put a counter on which you are getting the line items.
for the last page, the counter should be equal to the number of line items in the table .. right?
so.. keep the number of records in another variable, lets say in the global initialization part.
and for the secondary window condition tab
keep
counter = gv_number_of_lines
only when this condition satisfies, the window will be triggered. and this condition will only be satisfied if all the items are covered => last page.

I have alot of loose photos at home (old) and I would love to make a bunch of iphoto books and make the pages like whole page collages? How do I get my photos into iphoto in order to do this? Can I make a DVD at the drugstore and add them to iphoto?

I have alot of loose photos at home (old) and I would love to make a bunch of iphoto books and make the pages like whole page collages? How do I get my photos into iphoto in order to do this? Can I make a DVD at the drugstore and add them to iphoto?

You can make the collages easily if you have iWork. Just open a letter sized page in landscape mode and drag the photos onto the page, rotate and postiion as necessary. Then do a Print ➙ PDF ➙ Save PDF to iPhoto to get a 200 dpi jpeg version of the Pages page into iPhoto. From there you can add it to your book and use a blank page with the option to have an image as the backbround.
If you have a 3rd party image editor that supports layers you can create the collage with it.
OT

I want to order a second copy of an iPhoto book. Thought created in the smaller format only the larger format is showing. How can I switch an existing iPhoto book back to the smaller format?

I want to order a second copy of an existing iPhoto book. Though created in the smaller format now only the larger format is showing. How can I switch an existing iPhoto book back to the smaller format?

To change a book size duplicate it (select the book in the source pane and press command and D) since text flow and picture placements can change due to the size differences - then click on change themes, select the same theme and the new size
check it carefully
Before ordering your book preview it using this method - http://support.apple.com/kb/HT1040 - and save the resulting PDF for reference - the delivered book will match it.
LN

We are just about to purchase an iphoto book but received the message that we had one or more empty photo frames. We have gone over each page several times and found no empty frames. We cannot purchase the book because we cannot get beyond this message.

We are just about to purchase an iphoto book but received the message that we had one or more empty photo frames. We have gone over each page several times and found no empty frames. We cannot purchase the book because we cannot get beyond this message. Any ideas on how to rectify this situation?

So far every time this erros has occured it has been correct - the most difficult one to find is a full page photo layout behind a full page photo - this is hard to find - click here for a discussion on how to find it
LN

HT4906 I want to download the new updates I think to the 10.9 but our mac was given to us and when it comes to the last page it asks for the user name and password but this mac was wiped clean. How do I find out this info so I can get iPhoto?

I want to download the new updates I think to the 10.9 but our mac was given to us and when it comes to the last page it asks for the user name and password but this mac was wiped clean. How do I find out this info so I can get iPhoto? To be honest I'm not even sure what type of Mac I have and don't know how to find out what kind it is
I'd also like to make address labels and don't know where to find that either

You would make address lables with the Contacts app.
If you don't have the user name and password used to set up the machine then you need to purchase the apps for yourself.

Can I see how many views a book had in the iTunes Store?

Can I see how many views a book had in the iTunes Store?

No, but you can open your iTunesconnect page and see how many downloads and in what countries over a certain period and there are other none Apple application which offer more info....
Search posts by K.T. he has given out this infor previously in the iBooks discussion gpoup

HT201210 Can the OS for an iPod Touch be updated beyond 3.1.3? iTunes tells me that this is the latest software but many apps won't run on this older os.

Can the OS for an iPod Touch be updated beyond 3.1.3? iTunes tells me that this is the latest software but many apps won't run on this older os.

If you have a 1G (first generation) iPod touch then it can only go to iOS 3.1.3. To identify yours:
Identifying iPod models
If you need a higher iOS, you will have to get a newer model iPod.

I installed ShopAtHome toolbar, now Yahoo has hijacked my new tab. How do I fix this to the last visited tabs?

I installed ShopAtHome toolbar, now Yahoo has hijacked my new tab. How do I fix this to the last visited tabs?
Multiple forums have addressed the fact that Yahoo is hijacking new tabs. I installed the ShopAtHome toolbar - which I love - but then I get Yahoo installed (mysteriously and uninvited).
I would like the new tab to reset to its default of: either the panels of previous sites, or the blank page. The prior issues relating to netassistant do not work.
Any help would be appreciated.

Hi,
You can try to right-click and '''Reset''' the key '''browser.newtab.url''' in [http://kb.mozillazine.org/About:config about:config] or '''Modify''' and enter '''about:blank'''.
[http://kb.mozillazine.org/About:config_entries about:config Entries]
The [https://services.addons.mozilla.org/en-US/firefox/discovery/addon/config-descriptions/ Config Descriptions] add-on adds helpful source comments in about:config.
[https://support.mozilla.org/en-US/kb/new-tab-page-show-hide-and-customize-top-sites New tab page]
If the issue returns, you can try to check/change the '''Options''' for ShopAtHome in Firefox '''Tools''' ('''Alt''' + '''T''') > '''Add-ons''' > '''Extensions''', or in the toolbat itself.
[https://support.mozilla.org/en-US/kb/Using%20extensions%20with%20Firefox Using extensions]

How to tell iPhoto book " this is the last page "

Similar Messages

Maybe you are looking for