How to tell the date of a source clip (from events) in a project

I am making a very long and complex project.
I am using events from IHD and EHD.
The project has tons of clips from tons of different events spanning over 10 years.
I want to add some still pics. I want the still pics to be inserted around the same time the video was taken (i.e. my pics are sorted by date and my video clips in events are also sorted by date).
Question is:
Is there a way to see the date of the clip being used in the Project???
(The events list the clip dates, but I have so many clips in the project, that I couldn't possibly find them all using the events view).
So, I want to be able to say, this 10second portioned clip in this project was taken on April 5, 2005 for example.
Can I do this some how??
Thanks.

Thanks.
Darn it.... I didn't realize this.
I put together a 20min project so far... it is composed of many many few second clips from probably over 100 different events spanning over 10 years.... now i want to add the still pics to it..... so I guess it is a little to late for this solution ;(. I probably should have added the stills during the time I added the video clips (since it would be hard to go back to see what events the videos clips in the project came from).
I like to put all the video clips in first and then add the still pics. Then add music last.
But your tip is good to know and thanks so much again!

Similar Messages

Why the drag and drop of clips from events browser to project browser isn't working any more

My iMovie was working fine, but suddenly I'm not able any more to drag and drop select parts of a clip from event browser to the project browser. I read other people got this issue. Is there a solution? Thanks a lot

I had the same problem. Fixed it by repairing disk permissions with disk utility.

How to fetch the Date column(or Month column) from the file name from the specified path in ODI 11g

Hi ALL,
Can any one help us regarding How to fecth the Date column(or month column) from the file name specified in the path in a generalized way .
For example :
file name is :subscribers (Cost) Sep13.csv is specified in the below path
E:\Accounting\documents\subscribers (Cost) Sep13.csv
here I need to fetch the "Sep13" as a Date column in the ODI 11g in the generalized way.
Can any one help us in this case as early as possible.

I would suggest using a piece of Jython code for this. Something like this...
import os
import os.path
filelist = os.listdir(E:\Accounting\documents\)
for file in filelist:
datestr = file[19:-4]
You'd need to work out what to do with datestr next... perhaps write it to a table or update an ODI variable with it.
Hope this is of some help.

How to export the data to a excel file from RSA3?

Hi experts,
1.I am trying to save the RSA (SRM extractor) to excel spread sheet to compare SRM data with BI data. When i run the the transaction RSA3 it just showed me 10 different data packets. How to export the data to excel spread sheet for reconciliation?
2. Does any body know if the stepup tables exist for SRM extractors?
Thank in advance
Sharat.

Hello Sharat,
You have two options of saving data to excel sheet:
Step 1:
Goto RSA3, change the "Data Records / Calls" to 1000 and then execute. This way instead of 10 different packets you will get one packet.
Step2:
Click on the list button, open the packet by double clicking it. You will see all the data on your screen.
Step3:
Goto System -> List -> Save - > Local File -> Spreadsheet and give some name for your xls file.
Assign points if helpful.
Regards,
F-S

How to find the date when object is moved from quality to production server

Hi Experts,
I am working with BADI ZMM_PUR_REQ_PROC_001-Method Check and BADI ZME_PROCESS_PO_CUST-Method Check.
I need to add a check that a particular logic should be implemented only after this object is moved to the production server.
How can i check the date when an object (in my case this BADI) is moved to the production server?
<Removed by moderator>
Thanks in advance.
Edited by: Vinod Kumar on Aug 1, 2011 10:55 AM

Hi Sakshi,
So your reqt is that the documents created after your Transport implementation date should pass the check and others (old ones) should ignore.
I will recommend, if at all possible, to make all the old documents compatible to your check by doing a separate initial loading /one time activity to avoid this kind of hardcoding.
IF not at all possible to do so, then I think you should better hardcode your Transport req number and fetch date (AS4DATE) from E070 table and only if any entry exists, use that date as your required date. I believe this will be the date of transport imported in the target system.
You can avoid hardcoding Transport number by picking latest transport with respect to your object (BADI) using E071 table, but that will go wrong once you send any future changes in this BADI to Prod, so better to hardcode the transport.
BR,
Diwakar

How to fetch the data into one out parameter from two different queries

Hi,
I have an a problem how to implement condition in above procedure,and scenario is
i have to get the output into one out parameter from two queries.i.e if one query data is null
then i have to pick out data from another query into same out parameter.
CREATE OR REPLACE PROCEDURE GET_POLICIESMAP_BASEDON_GHPLID(I_COMPANYID IN NUMBER,
I_CARDID IN VARCHAR2,
PR_RESULTSET OUT SYS_REFCURSOR) IS
/* LOC_INSUREDID VARCHAR2(200);
LOC_RELATIONCODE VARCHAR2(200);
LOC_CURRENTPOLICYID VARCHAR2(4000);*/
BEGIN
OPEN PR_RESULTSET FOR
WITH A AS
(SELECT DISTINCT PM.MAINPOLICYID MAINPOLICYID,
id INSUREDID,
RELATIONCODE,
CURRENTPOLICYID
from INSUREDPERSONS IP
LEFT OUTER JOIN POLICIES_RULES_MAPPING PM
ON PM.POLICYID = IP.Currentpolicyid
where EIN IN (SELECT EIN
FROM INSUREDPERSONS ipp
JOIN VW_INSUREDINFO vw
ON IPP.ID = vw.insuredid
and vw.cardid = I_CARDID)
AND IP.CURRENTPOLICYID in
(SELECT ID
from policies
where companyid = I_COMPANYID
and dead = 0
AND POLICYTO > SYSDATE - 1))
SELECT INSUREDID, RELATIONCODE, CURRENTPOLICYID
FROM A
WHERE RELATIONCODE = 0
AND (A.MAINPOLICYID is null or
RELATIONCODE = 0 AND CURRENTPOLICYID = MAINPOLICYID)
UNION
SELECT INSUREDID, RELATIONCODE, CURRENTPOLICYID
FROM A
WHERE RELATIONCODE > 0;
/* HERE I NEED TO GET THE DATA FROM THIS BELOW QUERY INTO SAME OUT PARAMETER
WHEN ABOVE QUERY DATA CONTAINS NULLS */
/* IF PR_RESULTSET IS NULL THEN*/
OPEN PR_RESULTSET FOR
WITH A AS
(SELECT DISTINCT PM.MAINPOLICYID MAINPOLICYID,
id INSUREDID,
RELATIONCODE,
CURRENTPOLICYID
from INSUREDPERSONS IP
LEFT OUTER JOIN POLICIES_RULES_MAPPING PM
ON PM.POLICYID = IP.Currentpolicyid
where FAMILYID IN (SELECT FAMILYID
FROM INSUREDPERSONS ipp
JOIN VW_INSUREDINFO vw
ON IPP.ID = vw.insuredid
and vw.cardid = I_CARDID)
AND IP.CURRENTPOLICYID in
(SELECT ID
from policies
where companyid = I_COMPANYID
and dead = 0
AND POLICYTO > SYSDATE - 1))
SELECT INSUREDID, RELATIONCODE, CURRENTPOLICYID
FROM A
WHERE RELATIONCODE = 0
AND (A.MAINPOLICYID is null or
RELATIONCODE = 0 AND CURRENTPOLICYID = MAINPOLICYID)
UNION
SELECT INSUREDID, RELATIONCODE, CURRENTPOLICYID
FROM A
WHERE RELATIONCODE > 0;
/* END IF;*/
END GET_POLICIESMAP_BASEDON_GHPLID;
Thanks in Advance,
vvr.

SELECT DISTINCT PM.MAINPOLICYID MAINPOLICYID,
                       id              INSUREDID,
                       RELATIONCODE,
                       CURRENTPOLICYID
         from INSUREDPERSONS IP
         LEFT OUTER JOIN POLICIES_RULES_MAPPING PM
           ON PM.POLICYID = IP.Currentpolicyid
        where EIN IN (SELECT EIN
                        FROM INSUREDPERSONS ipp
                        JOIN VW_INSUREDINFO vw
                          ON IPP.ID = vw.insuredid
                         and vw.cardid = I_CARDID)In this code
where EINEIN is a column in INSUREDPERSONS?
and in the sub query below
(SELECT EIN
                        FROM INSUREDPERSONS ipp
                        JOIN VW_INSUREDINFO vw
                          ON IPP.ID = vw.insuredid
                         and vw.cardid = I_CARDID)EIN belongs to INSUREDPERSONS or VW_INSUREDINFO?
Please use Alias as we dont know your table structure.

How can i change the date of imported movie clips from mini dv?

i imported 1 hour of video from the same tape and created 1 event for all of them.but the date of it is today so imovie is showing it under 2011 when it is 2008? i tried the terminal command touch -t 200806061200 and then draging the event from movies-imovie events to the terminal, i also tried the touch -mt but its not working The folder itself changed dates but not all the clips inside it?

Hi Karsten
Me just adding in - tried this date and time change and as I get it
• iMovie'08 - can't be done - Right-Click or Shift-Click or whatever-Click - just don't work
• iMovie'09 (and most probably iM'11) - Exactly as describet - BUT one must ctrl-Click on one CLIP at a time - Can't be done to a full Event in one stroke (at least I can not figure out how)
(Now I did figure it out - Select Clip one - keep Shift-key down and select last clip in Event - then when all is selected ctrl-Click in one of them and Change Date & Time and all will change)
Yours Bengt W

How to change the Data sources after deploying the application ??

Hi All,
i want to know how to change the Data sources after deploying the application to the application server ???
I'm using Oracle Application Server 10g Release 3 (10.1.3.1.0)

Can you access the Enrprise Manager website of the target Application Server from your location? If so, you can change the datasource in it. If not, yo can bundle the datasource definition in your archive and use that one instead of the one configured in the target OC4J container. Or this will just be the responsability of your customer: whenever you send a new WAR file, they have to modify the datasource if needed and deploy the application?

How to migrate the data flow from DB CONNECT sourse system from 3.5 to BI

Hi
can any one tell me how to migrate the data flow from DB CONNECT sourse system from 3.5 to BI 7.

Hi,
Go to Infoprovider to which your DB connect DS feeds and Right Click on Data source-> Then Migrate-> With Export---> You have to build new 7.0 Transformations and DTP's etc.
~AK

How to select the data from a Maintainance View into an internal table

Hi All,
Can anybody tell me how to select the data from a Maintainance View into an internal table.
Thanks,
srinivas.

HI,
You can not retrieve data from A mentenance view.
For detail check this link,
http://help.sap.com/saphelp_nw2004s/helpdata/en/cf/21ed2d446011d189700000e8322d00/content.htm
Regards,
Anirban

FCP error message: Unable to read the data on your source tape!

Hey,
So I have been editing on the MacPro now for over a year and I have never seen this message before...the message reads:
_*"Capture encountered a problem reading the data on your source tape. This could be due to a problem with the tape."*_
Has anyone got this message and could help me out please? I need to edit these tapes A.S.A.P.
Thank You,
Erick

why would it start a month later giving me problems instead of when it was updated?
That is a good point. Anything change since the time it worked to when it didn't? How about trying another firewire cable. Those can go south without notice, might cause this.
Shane

How to add the date field in the dso and info cube

Hi all.
I am new to bi 7. in the earlier version v hav to button to add the date field. but in the bi 7 der is no option so can any body tell me how to add the date field in the data targets
Thanks & Regard
KK

my prob is solved
KK

How to bring the data from application server to presentation server

hi,
i have one problem,i have written the program which will open the files in the application server when we run the program in the background(sm37),the same data from application server i want to bring into presentation server in the format of (.csv),how to bring the data from application to presentation server can any body help me on this topic.folowing is the code .
*& Report ZPFA_HIER_LOAD
REPORT ZFPA_HIER_LOAD.
*---- Declaration of Oracle connectioN
DATA con_name LIKE dbcon-con_name VALUE 'COMSHARE'.
DATA: MFL1(9),MFL2(5),MFL3(9),MFL4(2),MFL5(8) TYPE c.
DATA : mfilename type string.
data: begin of matab1 occurs 0,
      MFL1(9) TYPE C,
      MFL2(5) TYPE C,
      MFL3(9) TYPE C,
      MFL4(2) TYPE C,
      MFL5(8) TYPE C ,
     end of matab1 .
data: setid(8) type c.
data: begin of source occurs 0,
      setid(8) type c,
      end of source.
*PARAMETERS : p_pfile LIKE filename-FILEEXTERN.
*PARAMETERS : m_bsenty(8). " type c obligatory.
*mfilename = P_PFILE.
EXEC SQL.
SET CONNECTION :con_name
ENDEXEC.
EXEC SQL.
CONNECT TO :con_name
ENDEXEC.
EXEC SQL PERFORMING get_source.
SELECT set_id FROM UNIT_SET INTO
:setid
ORDER BY SET_ID
ENDEXEC.
start-of-selection.
LOOP AT SOURCE.
REFRESH matab1. CLEAR matab1.
EXEC SQL PERFORMING evaluate.
SELECT TO_CHAR(MEM_ID),TRIM(TO_CHAR(MEM_PID)) FROM UNIT_TREE INTO :MFL1,
:MFL5
where set_id = :SOURCE-SETID ORDER BY MEM_ID
ENDEXEC.
if SOURCE-SETID = '80000000'.
   mfilename = '/tmp/aesorg'.
elseif SOURCE-SETID = '80000006'.
   mfilename = '/tmp/Consolidation_Manager'.
elseif SOURCE-SETID = '80000010'.
   mfilename = '/tmp/10org'.
elseif SOURCE-SETID = '80000012'.
   mfilename = '/tmp/20org'.
elseif SOURCE-SETID = '80000018'.
   mfilename = '/tmp/30org'.
elseif SOURCE-SETID = '80000025'.
   mfilename = '/tmp/40org'.
Endif.
mfilename = '/usr/test.dat'.
************************This was i tried***********************
open dataset mfilename for output in text mode encoding default." IN
*TEXT MODE ENCODING DEFAULT.
if sy-subrc <> 0.
exit.
endif.
close dataset mfilename.
CALL FUNCTION 'GUI_DOWNLOAD'
   EXPORTING
     FILENAME         = MFILENAME
     FILETYPE         = 'ASC'
   TABLES
     data_tab         = matab1
   EXCEPTIONS
     file_write_error = 1
     invalid_type     = 2
     no_authority     = 3
     unknown_error    = 4
     OTHERS           = 10.
loop at matab1 .
transfer matab1 to mfilename.
endloop.
clear matab1.
ENDLOOP.
loop at matab1 .
transfer matab1 to mfilename.
endloop.
close dataset mfilename.
     MFL5 = '0'.
   CLEAR MFL5.
FORM evaluate.
if MFL5 = -1.
    MFL5 = ''.
ENDIF.
concatenate MFL1 ','   into MFL1.
concatenate MFL1 ','   into MFL3.
matab1-MFL1 = MFL1.
matab1-MFL2 = 'ZBUE,'.
matab1-MFL3 = MFL3.
matab1-MFL4 = ' ,'.
matab1-MFL5 = MFL5.
append matab1 .
CLEAR MFL1.
CLEAR MFL2.
CLEAR MFL3.
CLEAR MFL4.
CLEAR MFL5.
ENDFORM.
                 "evaluate
*&      Form GET_SOURCE
      text
FORM GET_SOURCE.
source-setid = setid.
append source.
clear source.
ENDFORM.                    "GET_SOURCE

Hi Rammohan,
You cannot use OPEN DATASET to transfer data from application server to presentation server.
You can do the following :
<b>Do 1st point in BACKGROUND</b>
1. Read the data file from application server into an internal table using OPEN DATASET
<b>Do 2nd point in Foreground</b>
2. Once you get the data into an internal table, then use FM GUI_DOWNLOAD to download it on presentation server
You cannot use the above 2 point together in Background because its not possible. Hence you need program it partially in background and partially in foreground.
Best regards,
Prashant

How to store the data coming from network analyser into a text or excel file

Hii everyone
I'm using Agilent 8719ET network analyser and wish to store the data coming from netowrk analyser into a text file/ excel file.
Presently I'm able to get the data on Labview graph using GPIB . Can anyone suggest how to go ahead after collect data sub vi. How can the data be stored into a file apart from showing on the graph?
Attached is the vi for kind consideration...
Looking for help
Regards
Rohit
Attachments:
Agilent 87XX Series Exceed Max Meas.vi ‏43 KB

First let me say that your code really looks pretty good. The data handling could be made more efficient by calculating the number of datapoints that are going to be in the completed dataset and preallocating the entire array -- but depending upon your answer to my questions, the logic in the lower shift register may be going away - so we won't worry about that right now.
The thing I need to know before addressing the data storage question is: Each time you call "Collect and Display Data.vi", how many element are in the array? Are you reading single data points, or a group of data? (BTW: if the answer to that question is obvious based on the way the other VIs are setup, I don't have the drivers so I can't tell what the setup values are.) Second, how fast does the loop iterate? Are we talking msec per loop?, seconds? fortnights?
The issues here are two-fold: how much data? and how fast is it coming? The answer to these will tell you how to save the data.
Mike...
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

How to delete the data in the compressed infocube

hi, bi gurus
we are facing a problem in inventory management the info cube in BW production
normally every time inventory cube gets compressed that means the data will be moving to F fact table to E fact table
now the problem is we are having some bad data for latest five requests in this cube as we all know compressed data
can't be delete by deleting request in the request tab the only way is go for selective deletion but i don't find any selective
option in the cube we are PSA data for that five request which having correctdata please help how to delete the bad data in the
info cube and load the correct data which we are having in PSA
Thanks
Joe

Hi André
Thanks you for ur answer
what i am telling is their is an option for selective deletion for inventory cube
but i don't find any specific option to delete the data that means like calendar day like that
i hope you got my question.
hi Saveen Kumar,
Thank you again
we are using 3.xx flow if we do the request reverse posting for all the 5 requests which has updated incorrect data
next we need to do compression also or not
and how to reload the data from PSA to Infocube becuse if request still avaliable in info cube it will not allow me to do that
can you please tell me detail how to proceed in step by step this is first time i am doing request reverse post and i have to do it production please tell me
Thanks in adavance
Thanks,joe

How to tell the date of a source clip (from events) in a project

Similar Messages

Maybe you are looking for